Projects/CurrentTester Commit

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read NetworkFolder_.vi created 10644 0 0

	1	NO CONTENT: new file 10644			NO CONTENT: new file 10644

1

NO CONTENT: new file 10644

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write NetworkFolder_.vi created 10644 0 0

	1	NO CONTENT: new file 10644			NO CONTENT: new file 10644

1

NO CONTENT: new file 10644

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/BuildTestID.vi created 10644 0 0

1

NO CONTENT: new file 10644

0

CurrentTester [LabVIEW]/CurrentTester.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/Initialization.ini +138 -79

@@ -1,7 +1,7
1	[Tester]	1	[Tester]
2	TesterType = "~~HSMP1~~"	2	TesterType = "SMP3"
3	TesterName = "~~Hochs~~trommessplatz 1"	3	TesterName = "Strommessplatz 3"
4	MaxCurrent = 600	4	MaxCurrent = 130
5	MaxTemperature = 250	5	MaxTemperature = 250
6	MaxAmbientTemperature = 50	6	MaxAmbientTemperature = 50
7	TemperatureWarning- = 10	7	TemperatureWarning- = 10
@@ -11,9 +11,9
11	SensorsEnable 2 = "True"	11	SensorsEnable 2 = "True"
12	SensorsEnable 3 = "True"	12	SensorsEnable 3 = "True"
13	SensorsEnable 4 = "True"	13	SensorsEnable 4 = "True"
14	SensorsEnable 5 = "~~Fals~~e"	14	SensorsEnable 5 = "True"
15	SensorsEnable 6 = "~~Fals~~e"	15	SensorsEnable 6 = "True"
16	SensorsEnable 7 = "~~Fals~~e"	16	SensorsEnable 7 = "True"
17	SensorsEnable 8 = "False"	17	SensorsEnable 8 = "False"
18	SensorsEnable 9 = "False"	18	SensorsEnable 9 = "False"
19	SensorsEnable 10 = "False"	19	SensorsEnable 10 = "False"
@@ -22,14 +22,14
22	SensorsEnable 13 = "False"	22	SensorsEnable 13 = "False"
23	SensorsEnable 14 = "False"	23	SensorsEnable 14 = "False"
24	SensorsDescription.<size(s)> = "15"	24	SensorsDescription.<size(s)> = "15"
25	SensorsDescription 0 = "~~Keithley: Ch6~~"	25	SensorsDescription 0 = "NI-9210: Ch0"
26	SensorsDescription 1 = "~~Keithley: Ch7~~"	26	SensorsDescription 1 = "NI-9210: Ch1"
27	SensorsDescription 2 = "~~Keithley: Ch8~~"	27	SensorsDescription 2 = "NI-9210: Ch2"
28	SensorsDescription 3 = "~~Keithley: Ch9~~"	28	SensorsDescription 3 = "NI-9210: Ch3"
29	SensorsDescription 4 = "~~Keithley: Ch1~~0"	29	SensorsDescription 4 = "NI-9219: Ch0"
30	SensorsDescription 5 = ""	30	SensorsDescription 5 = "NI-9219: Ch1"
31	SensorsDescription 6 = ""	31	SensorsDescription 6 = "NI-9219: Ch2"
32	SensorsDescription 7 = ""	32	SensorsDescription 7 = "NI-9219: Ch3"
33	SensorsDescription 8 = ""	33	SensorsDescription 8 = ""
34	SensorsDescription 9 = ""	34	SensorsDescription 9 = ""
35	SensorsDescription 10 = ""	35	SensorsDescription 10 = ""
@@ -38,9 +38,9
38	SensorsDescription 13 = ""	38	SensorsDescription 13 = ""
39	SensorsDescription 14 = ""	39	SensorsDescription 14 = ""
40	VoltageDescription.<size(s)> = "5 2"	40	VoltageDescription.<size(s)> = "5 2"
41	VoltageDescription 0 = "~~Keithley: Ch2~~"	41	VoltageDescription 0 = "NI PXI-6281: Ch3"
42	VoltageDescription 1 = "Pr�flingsspannung [V]"	42	VoltageDescription 1 = "Pr�flingsspannung [V]"
43	VoltageDescription 2 = "~~Keithley~~: Ch4"	43	VoltageDescription 2 = "NI PXI-6281: Ch4"
44	VoltageDescription 3 = "Shunt- Spannung [V]"	44	VoltageDescription 3 = "Shunt- Spannung [V]"
45	VoltageDescription 4 = ""	45	VoltageDescription 4 = ""
46	VoltageDescription 5 = "Strom [A]"	46	VoltageDescription 5 = "Strom [A]"
@@ -52,34 +52,34
52		52
53	[Hardware]	53	[Hardware]
54	SimulateDevices = True	54	SimulateDevices = True
55	DI_E-Stop = "~~Dev1/port1/line0~~"	55	DI_E-Stop = "PXI1Slot5/port0/line5"
56	DI_Setup = ""	56	DI_Setup = "PXI1Slot5/port0/line4"
57	PowerSupply_VISAName = "COM2"	57	PowerSupply_VISAName = "COM4"
58	PowerSupply_Address = "6"	58	PowerSupply_Address = "1"
59	PowerSupply_Baudrate = "9600"	59	PowerSupply_Baudrate = "9600"
60	PowerSupply_OutputVoltage = "~~8,0~~00000"	60	PowerSupply_OutputVoltage = "5,500000"
61	PowerSupply_OverVoltageProtection = "9,000000"	61	PowerSupply_OverVoltageProtection = "6,000000"
62	PowerSupply_MinCurrent = "1"	62	PowerSupply_MinCurrent = "0"
63	PowerSupply_Check = False	63	PowerSupply_Check = False
64	PowerSupply_WarningPower = "1500,000000"	64	PowerSupply_WarningPower = "200,000000"
65	PowerSupply_AbortPower = "2000,000000"	65	PowerSupply_AbortPower = "250,000000"
66	PowerSupply_PID = "False"	66	PowerSupply_PID = "False"
67	PowerSupply_PID_Time = "0,100000"	67	PowerSupply_PID_Time = "0,100000"
68	PowerSupply_PID_ProportionalGain = "0,100000"	68	PowerSupply_PID_ProportionalGain = "0,100000"
69	PowerSupply_PID_IntegralTime = "0,180000"	69	PowerSupply_PID_IntegralTime = "0,180000"
70	PowerSupply_PID_DerivativeTime = "0,000000"	70	PowerSupply_PID_DerivativeTime = "0,000000"
71	AbortCurrentDifference = "0"	71	AbortCurrentDifference = "50"
72	Measurement_Channels.<size(s)> = "17"	72	Measurement_Channels.<size(s)> = "17"
73	Measurement_Channels 0 = "~~112~~"	73	Measurement_Channels 0 = "PXI1Slot5/ai4"
74	Measurement_Channels 1 = "~~102~~"	74	Measurement_Channels 1 = "PXI1Slot5/ai5"
75	Measurement_Channels 2 = "~~104~~"	75	Measurement_Channels 2 = "NI9210/ai0"
76	Measurement_Channels 3 = "~~106~~"	76	Measurement_Channels 3 = "NI9210/ai1"
77	Measurement_Channels 4 = "~~107~~"	77	Measurement_Channels 4 = "NI9210/ai2"
78	Measurement_Channels 5 = "~~108~~"	78	Measurement_Channels 5 = "NI9210/ai3"
79	Measurement_Channels 6 = "109"	79	Measurement_Channels 6 = "NI9219/ai0"
80	Measurement_Channels 7 = "110"	80	Measurement_Channels 7 = "NI9219/ai1"
81	Measurement_Channels 8 = ""	81	Measurement_Channels 8 = "NI9219/ai2"
82	Measurement_Channels 9 = ""	82	Measurement_Channels 9 = "NI9219/ai3"
83	Measurement_Channels 10 = ""	83	Measurement_Channels 10 = ""
84	Measurement_Channels 11 = ""	84	Measurement_Channels 11 = ""
85	Measurement_Channels 12 = ""	85	Measurement_Channels 12 = ""
@@ -87,55 +87,109
87	Measurement_Channels 14 = ""	87	Measurement_Channels 14 = ""
88	Measurement_Channels 15 = ""	88	Measurement_Channels 15 = ""
89	Measurement_Channels 16 = ""	89	Measurement_Channels 16 = ""
90	Measurement_Sample = "<size(s)=17> 1,000000 1,000000 ~~1,000000 1,000000 1,000000 1,000000 1,000000 1~~,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"	90	Measurement_Sample = "<size(s)=17> 1,000000 1,000000 2,000000 2,000000 2,000000 2,000000 40,000000 40,000000 40,000000 40,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
91	ShuntResistance = 0,00~~006~~	91	ShuntResistance = 0,001
92	Measurement_Check = False	92	Measurement_Check = False
93	Measurement_Delay = "1"	93	Measurement_Delay = "1"
94	DMM_VISAName = "~~COM1~~"	94	DMM_VISAName = "PXI1Slot3"
95	DMM_ContactLimits = "<size(s)=2> 0,0 10,0"	95	DMM_ContactLimits = "<size(s)=2> 0,0 1,0"
96	TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"	96	TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
97	TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"	97	TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
98	VoltageGain = "<size(s)=5> 1,000000 1,000000 1,000000 1,000000 1,000000"	98	VoltageGain = "<size(s)=5> 1,000000 1,000000 1,000000 1,000000 1,000000"
99	VoltageOffset = "<size(s)=5> 0,000000 0,000000 0,000000 0,000000 0,000000"	99	VoltageOffset = "<size(s)=5> 0,000000 0,000000 0,000000 0,000000 0,000000"
100	AllowedContactFails = "2"	100	AllowedContactFails = "2"
101		101
102	[~~HSMP1~~]	102	[SMP3]
103	DMM_Baudrate = "9600"	103	DMM_Function = "2-wire Resistance"
104	Measurement_Channels_AutoRange.<size(s)> = "13"	104	DMM_AutoRange = False
105	Measurement_Channels_AutoRange 0 = "FALSE"	105	DMM_Range = "0,020000"
106	Measurement_Channels_AutoRange 1 = "TRUE"	106	DMM_Resolution = "0,001000"
107	Measurement_Channels_AutoRange 2 = "TRUE"	107	Configuration_AI_Voltage.<size(s)> = "2"
108	Measurement_Channels_AutoRange 3 = "TRUE"	108	Configuration_AI_Voltage 0.Maximum = "5,000000"
109	Measurement_Channels_AutoRange 4 = "TRUE"	109	Configuration_AI_Voltage 0.Minimum = "-5,000000"
110	Measurement_Channels_AutoRange 5 = "TRUE"	110	Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
111	Measurement_Channels_AutoRange 6 = "TRUE"	111	Configuration_AI_Voltage 1.Maximum = "1,000000"
112	Measurement_Channels_AutoRange 7 = "TRUE"	112	Configuration_AI_Voltage 1.Minimum = "-1,000000"
113	Measurement_Channels_AutoRange 8 = "TRUE"	113	Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
114	Measurement_Channels_AutoRange 9 = "TRUE"	114	Configuration_AI_Thermocouple.<size(s)> = "8"
115	Measurement_Channels_AutoRange 10 = "TRUE"	115	Configuration_AI_Thermocouple 0.Maximum = "250,000000"
116	Measurement_Channels_AutoRange 11 = "TRUE"	116	Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
117	Measurement_Channels_AutoRange 12 = "TRUE"	117	Configuration_AI_Thermocouple 0.Type = "K"
118	Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"	118	Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
119	Measurement_Channels_Resolution.<size(s)> = "13"	119	Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
120	Measurement_Channels_Resolution 0 = "6.5"	120	Configuration_AI_Thermocouple 1.Maximum = "250,000000"
121	Measurement_Channels_Resolution 1 = "6.5"	121	Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
122	Measurement_Channels_Resolution 2 = "6.5"	122	Configuration_AI_Thermocouple 1.Type = "K"
123	Measurement_Channels_Resolution 3 = "6.5"	123	Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
124	Measurement_Channels_Resolution 4 = "6.5"	124	Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
125	Measurement_Channels_Resolution 5 = "6.5"	125	Configuration_AI_Thermocouple 2.Maximum = "250,000000"
126	Measurement_Channels_Resolution 6 = "6.5"	126	Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
127	Measurement_Channels_Resolution 7 = "6.5"	127	Configuration_AI_Thermocouple 2.Type = "K"
128	Measurement_Channels_Resolution 8 = "6.5"	128	Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
129	Measurement_Channels_Resolution 9 = "6.5"	129	Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
130	Measurement_Channels_Resolution 10 = "6.5"	130	Configuration_AI_Thermocouple 3.Maximum = "250,000000"
131	Measurement_Channels_Resolution 11 = "6.5"	131	Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
132	Measurement_Channels_Resolution 12 = "6.5"	132	Configuration_AI_Thermocouple 3.Type = "K"
133	Resistance_Function = "Resistance"	133	Configuration_AI_Thermocouple 3.CJC_Source = "Built-In"
134	Resistance_OffsetCompensation = "FALSE"	134	Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
135	TableControl_Out_LiftTable = "Dev1/port0/line5"	135	Configuration_AI_Thermocouple 4.Maximum = "250,000000"
136	TableControl_Out_SettingMode.<size(s)> = "2"	136	Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
137	TableControl_Out_SettingMode 0 = "Dev1/port0/line0"	137	Configuration_AI_Thermocouple 4.Type = "K"
138	TableControl_Out_SettingMode 1 = "Dev1/port0/line1"	138	Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
		139	Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
		140	Configuration_AI_Thermocouple 5.Maximum = "250,000000"
		141	Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
		142	Configuration_AI_Thermocouple 5.Type = "K"
		143	Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
		144	Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
		145	Configuration_AI_Thermocouple 6.Maximum = "250,000000"
		146	Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
		147	Configuration_AI_Thermocouple 6.Type = "K"
		148	Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
		149	Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
		150	Configuration_AI_Thermocouple 7.Maximum = "250,000000"
		151	Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
		152	Configuration_AI_Thermocouple 7.Type = "K"
		153	Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
		154	Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
		155	Configuration_AI_NI9219_Resistance.<size(s)> = "4"
		156	Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
		157	Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
		158	Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
		159	Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
		160	Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
		161	Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750"
		162	Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"
		163	Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
		164	Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000"
		165	Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000"
		166	Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
		167	Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
		168	Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
		169	Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750"
		170	Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000"
		171	Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
		172	Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000"
		173	Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000"
		174	Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
		175	Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
		176	Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
		177	Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"
		178	Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"
		179	Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
		180	Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000"
		181	Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000"
		182	Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
		183	Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
		184	Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
		185	Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750"
		186	Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"
		187	Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
		188	Configuration_AI_NI9219_Type.<size(s)> = "4"
		189	Configuration_AI_NI9219_Type 0 = "Thermocouple"
		190	Configuration_AI_NI9219_Type 1 = "Thermocouple"
		191	Configuration_AI_NI9219_Type 2 = "Thermocouple"
		192	Configuration_AI_NI9219_Type 3 = "Thermocouple"
139		193
140	[DefaultValues]	194	[DefaultValues]
141	WorkingStroke = "0"	195	WorkingStroke = "0"
@@ -186,7 +240,7
186		240
187	[Pathes]	241	[Pathes]
188	User = "C:\Work\CurrentTester\support\User.txt"	242	User = "C:\Work\CurrentTester\support\User.txt"
189	ReportsFolder = "C:\Work\CurrentTester\support\ResultData_~~HSMP1~~"	243	ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
190	ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"	244	ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
191	CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"	245	CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
192	Applicants = "C:\Work\CurrentTester\support\Applicants.txt"	246	Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
@@ -269,4 +323,9
269	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	323	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
270	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	324	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
271	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	325	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
272	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	326	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		327
		328	[Tips]
		329	Text.<size(s)> = "2"
		330	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		331	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

CurrentTester [LabVIEW]/Initialization_Evaluation.ini +6 -1

@@ -109,4 +109,9
109	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	109	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
110	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	110	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
111	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	111	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
112	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	112	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		113
		114	[Tips]
		115	Text.<size(s)> = "2"
		116	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		117	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

CurrentTester [LabVIEW]/Initialization_HSMP1.ini +6 -1

@@ -269,4 +269,9
269	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	269	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
270	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	270	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
271	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	271	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
272	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	272	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		273
		274	[Tips]
		275	Text.<size(s)> = "2"
		276	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		277	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

CurrentTester [LabVIEW]/Initialization_HSMP2.ini +6 -1

@@ -425,4 +425,9
425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		429
		430	[Tips]
		431	Text.<size(s)> = "2"
		432	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		433	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

CurrentTester [LabVIEW]/Initialization_SMP3.ini +6 -1

@@ -323,4 +323,9
323	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	323	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
324	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	324	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
325	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	325	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
326	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	326	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		327
		328	[Tips]
		329	Text.<size(s)> = "2"
		330	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		331	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cChangeTestData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cChangeTestDataReload.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cCurrentTestConfig.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cCurrentTestData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cDefaultValues.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cEventMessage.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cHardware.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cMovingParameter.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cNotepadEntry.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cNotifiers.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cPathes.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cPosition.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolConfiguration.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolResults.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolTestsData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRefs_Axes.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRefs_Notepad.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cReportConfiguration.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRunStatesMain.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cScale.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cSystem.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTestBasicData(TestType).ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTestBasicData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTester.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTesterType.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eButtonsState.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eCurveSelection.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eDurationConversionFunction.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eLearningButtonsOption.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eOperationCurrent.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eOperationSystem.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eState.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eStopOperation.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eSubpanel.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Error.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Measure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read ErrorMessage.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read Semaphore.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TemperatureSensors.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TestResultsTimestamps.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TesterType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read cCurrentTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read cTestBasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read evHmiData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read pConfiguration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read pTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Error.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Measure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write ErrorMessage.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write Semaphore.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TemperatureSensors.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TestResultsTimestamps.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TesterType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write cCurrentTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write cTestBasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write evHmiData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write pConfiguration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write pTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ControlLearningButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_GetResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Delete_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Init_AxesControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_DisableAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_GetPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Move.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_GetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_GetPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Reset.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_SetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ReadE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ReinitPositioningUnit_HSMP2.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Activate.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Stop_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/TableControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/UpdateAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/UpdateForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/WriteForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/WritePressure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/AddNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/AddValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/BuildName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CalcIntervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CalcResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ChangeGraphResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ChangeTestData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckAbsolutePosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckLongestPath.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckNetworkExist.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckPIDTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckProtocolsExist.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTemperatureLimits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfigChanged.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckVoltageLimits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ClearNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ClearResultFolder.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CloseEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ConvertDuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CreateICTNotifiers.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Delay.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Delay_GetPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DeleteEntryNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DeleteICTNotifiers.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DetectError.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogChange.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogCopy.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogCurrentChart.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogError.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogPwInput.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ExecuteDialogCurrentChart.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ExtendTestResult.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/FillStandardValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetAssemblies.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetAutomaticReportData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetCableSize.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetChildClass.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetCurrentProfileGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetMethodReference.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetReportName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetStartPath.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTemperatureSensorsEnable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTemperatureSensorsType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTestIDs.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/HashtagTxtToArray.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Finish.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Start.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraphCurves.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraphCurves_Protocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadChildClass.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadStandardValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadVIInSubPanel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/MultiplySelectedValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PID.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PerformMeasurements.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PrepareNetworkFolder.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PresaveSensorsNames.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CreateProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Delete.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetDestinationFolder.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetMeasurementsPathes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetProtocolName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetReports.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_InitCommonGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests_Statistic_Limits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Move.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Selection.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_GetIntervalIndexes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_TableCustomFormatting.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_TableData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ReadFiles.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ReadTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Read_AIs_.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RegEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RemoveValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RoundToNextPoint1.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SaveTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SelectEntryNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SelectIntervalsCurrentProfileTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SetEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Setup_GetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Simulation.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/StopSubPanelVI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/StripName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SynchronizeReport.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SynchronizeTestData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateCurrentProfileTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateCurrentProfileTableIntervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraphCurves.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraph_DataIndex.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateTestDataTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/VisualisePosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_CurrentProfile.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals_HideCurrentValuesCalculationRows.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals_Rename_Delete.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedAutomaticReport.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedComment.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedMaxTemp.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvInfo.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvMoveStop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvMoving.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvStop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvStopSubPanel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvSystem.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/DisplayResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Config.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ControlLearningButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/DMM_GetResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Init_AxesControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_DisableAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_GetPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ReadE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WriteForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WritePressure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/VisualiseInsetData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/WriteAO.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

builds/CurrentTester.exe 0 0

1

NO CONTENT: modified file

0

builds/data/Initialization.ini +6 -1

@@ -425,4 +425,9
425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		429
		430	[Tips]
		431	Text.<size(s)> = "2"
		432	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		433	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

builds/data/Initialization_Evaluation.ini +6 -1

@@ -109,4 +109,9
109	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	109	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
110	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	110	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
111	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	111	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
112	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	112	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		113
		114	[Tips]
		115	Text.<size(s)> = "2"
		116	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		117	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

builds/data/Initialization_HSMP1.ini +6 -1

@@ -269,4 +269,9
269	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	269	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
270	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	270	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
271	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	271	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
272	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	272	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		273
		274	[Tips]
		275	Text.<size(s)> = "2"
		276	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		277	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

builds/data/Initialization_HSMP2.ini +6 -1

@@ -425,4 +425,9
425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"	425	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."	426	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"	427	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?" No newline at end of file	428	Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
		429
		430	[Tips]
		431	Text.<size(s)> = "2"
		432	Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
		433	Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>\|." No newline at end of file

0

builds/data/Initialization_SMP3.ini +13 -8

             PowerSupply_OverVoltageProtection = "6,000000"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
-            PowerSupply_WarningPower = "200,000000"
+            PowerSupply_WarningPower = "500,000000"
-            PowerSupply_AbortPower = "250,000000"
+            PowerSupply_AbortPower = "715,000000"
             PowerSupply_PID = "FALSE"
             PowerSupply_PID_Time = "0,200000"
             PowerSupply_PID_ProportionalGain = "0,050000"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
-            Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 0.Maximum = "200,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3851"
-            Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"
+            Configuration_AI_NI9219_Resistance 0.R0 = "100,000000"
             Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 3,9083E-3 -5,775E-7 -4,183E-12"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"
-            Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 8,462101662E-4 2,586776507E-4 1,707800227E-7"
+            Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 9,998900971E-4 2,31754054E-4 2,905451861E-7"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3851"
             Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"
-            Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 3,9083E-3 -5,775E-7 -4,183E-12"
+            Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 8,462101662E-4 2,586776507E-4 1,707800227E-7"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Resistance_Thermistor"
-            Configuration_AI_NI9219_Type 3 = "Resistance_RTD"
+            Configuration_AI_NI9219_Type 3 = "Resistance_Thermistor"
             [DefaultValues]
             WorkingStroke = "0"
             Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
             Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?"
-            Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
  No newline at end of file
+            Messages 9 = "Sollen die Testdaten ge�ndert, bestehende Verzeichnisse umbenannt und vorhandene Excel- Testprotokolle �berschrieben werden?"
+            [Tips]
+            Text.<size(s)> = "2"
+            Text 0 = "Der resultierende vollst�ndige Windows-Dateipfad f�r die eingegebene Test ID, den Unterordner und die Pr�flingsbezeichnung ist zu lang!"
+            Text 1 = "Der eingegebene Sensorname soll einmalig und nicht leer sein, maximal 31 Zeichen aufweisen und keines der folgenden Zeichen enthalten: \/:*?"<>|."
  No newline at end of file

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

The requested changes are too big and content was truncated. Show full diff