Projects/CurrentTester Commit

0

CurrentTester [LabVIEW]/Initialization_Evaluation.ini created 10644 +109 0

			@@ -0,0 +1,109
		1	[Tester]
		2	TesterType = "Evaluation"
		3	TesterName = "Stromtester-Auswertung"
		4	SensorsEnable.<size(s)> = "15"
		5	SensorsEnable 0 = "True"
		6	SensorsEnable 1 = "True"
		7	SensorsEnable 2 = "True"
		8	SensorsEnable 3 = "True"
		9	SensorsEnable 4 = "True"
		10	SensorsEnable 5 = "True"
		11	SensorsEnable 6 = "True"
		12	SensorsEnable 7 = "True"
		13	SensorsEnable 8 = "True"
		14	SensorsEnable 9 = "True"
		15	SensorsEnable 10 = "True"
		16	SensorsEnable 11 = "True"
		17	SensorsEnable 12 = "True"
		18	SensorsEnable 13 = "True"
		19	SensorsEnable 14 = "True"
		20
		21	[Hardware]
		22	SimulateDevices = False
		23
		24	[DefaultValues]
		25	SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218"
		26
		27	[Pathes]
		28	User = "\\orion\labview\CurrentTester\support\User.txt"
		29	ReportsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
		30	ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
		31	CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
		32	Applicants = "\\orion\labview\CurrentTester\support\Applicants.txt"
		33
		34	[Report]
		35	FileNameFormat = "%s_TestResults.txt"
		36	ReportNameFormat = "%s_TestReport_%s.xlsx"
		37	ReportTemplate_German = "\\orion\labview\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
		38	ReportTemplate_English = "\\orion\labview\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
		39
		40	[Protocol]
		41	ProtocolNameFormat = "%s_A%d_Report_%s.docx"
		42	ProtocolTemplate_German = "\\orion\labview\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
		43	ProtocolTemplate_English = "\\orion\labview\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
		44	ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
		45	ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
		46	ProtocolDataFolderName = "Bilder\|Messungen"
		47	ProtocolFolderFormat = "%s_%s_Stromtest"
		48
		49	[StateMessages]
		50	Info.<size(s)> = "23"
		51	Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
		52	Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
		53	Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
		54	Info 3 = "Testdaten anlegen"
		55	Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
		56	Info 5 = "Test geladen"
		57	Info 6 = "Laufende Pr�fung..."
		58	Info 7 = "Pr�fung erfolgreich abgeschlossen"
		59	Info 8 = "Fehler aufgetreten!"
		60	Info 9 = "Test abgebrochen!"
		61	Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
		62	Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
		63	Info 12 = "Test abgebrochen! Messrate ist zu hoch"
		64	Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
		65	Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"
		66	Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"
		67	Info 16 = "Testprotokoll wird erstellt... Bitte warten"
		68	Info 17 = "Testprotokoll erstellt"
		69	Info 18 = "Der letzte Test ist geladen..."
		70	Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen"
		71	Info 20 = "Testbericht wird erstellt... Bitte warten"
		72	Info 21 = "Testbericht erstellt"
		73	Info 22 = "Test ist gespeichert"
		74	Result.<size(s)> = "23"
		75	Result 0 = "Not-Halt"
		76	Result 1 = ""
		77	Result 2 = "Bereit"
		78	Result 3 = "Bereit"
		79	Result 4 = "Einrichtbetrieb"
		80	Result 5 = "Bereit"
		81	Result 6 = "Pr�fung l�uft"
		82	Result 7 = "Pr�fung fertig"
		83	Result 8 = "Fehler"
		84	Result 9 = "Pr�fung Stop"
		85	Result 10 = "Pr�fung Stop"
		86	Result 11 = "Pr�fung Stop"
		87	Result 12 = "Pr�fung Stop"
		88	Result 13 = "Pr�fung Stop"
		89	Result 14 = "Pr�fung Stop"
		90	Result 15 = "Pr�fung Stop"
		91	Result 16 = "Bereit"
		92	Result 17 = "Bereit"
		93	Result 18 = "Bereit"
		94	Result 19 = "Bereit"
		95	Result 20 = "Bereit"
		96	Result 21 = "Bereit"
		97	Result 22 = "Bereit"
		98
		99	[DialogMessages]
		100	Messages.<size(s)> = "9"
		101	Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
		102	Messages 1 = "Bitte achten Sie darauf, dass alle Felder in der gew�hlten Sprache sind"
		103	Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass alle Felder in der gew�hlten Sprache sind"
		104	Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"
		105	Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
		106	Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
		107	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
		108	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
		109	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?" No newline at end of file

0

CurrentTester [LabVIEW]/class_Evaluation/class_Evaluation.lvclass created 10644 +26 0

			@@ -0,0 +1,26
		1	<?xml version='1.0' encoding='UTF-8'?>
		2	<LVClass LVVersion="21008000">
		3	<Property Name="NI.Lib.Icon" Type="Bin">)1#!!!!!!!)!"1!&!!!-!%!!!@````]!!!!"!!%!!!(]!!!Q(C=\>8"=>MQ%!8143;(8.6"2CVM#WJ",7Q,SN&(N<!NK!7VM#WI"<8A0$%94UZ2$P%E"Y.?G@I%A7=11U>M\7P%FXB^VL\`NHV=@X<^39O0^N(_<8NZOEH@@=^_CM?,3)VK63LD->8LS%=_]J'0@/1N<XH,7^\SFJ?]Z#5P?=F,HP+5JTTF+5`Z>MB$(P+1)YXRU2DU$(![)Q3YW.YBG>YBM@8'\B':\B'2Z>9HC':XC':XD=&M-T0--T0-.DK%USWS(H'2\$2`-U4`-U4`/9-JKH!>JE<?!W#%;UC_WE?:KH?:R']T20]T20]\A=T>-]T>-]T?/7<66[UTQ//9^BIHC+JXC+JXA-(=640-640-6DOCC?YCG)-G%:(#(+4;6$_6)]R?.8&%`R&%`R&)^,WR/K<75?GM=BZUG?Z%G?Z%E?1U4S%`S%`S'$;3XG3XG3RV320-G40!G3D6^J-(3D;F4#J,(T\:<=HN+P5FS/S,7ZIWV+7.NNFC<+.<GC0819TX-7!]JVO,(7N29CR6L%7,^=<(1M4#R*IFV][.DX(X?V&6>V&G>V&%>V&\N(L@_Z9\X_TVONVN=L^?Y8#ZR0J`D>$L&]8C-Q_%1_`U_>LP>WWPAG_0NB@$TP@4C`%`KH@[8`A@PRPA=PYZLD8Y!#/7SO!!!!!!</Property>
		4	<Property Name="NI.Lib.SourceVersion" Type="Int">553680896</Property>
		5	<Property Name="NI.Lib.Version" Type="Str">1.0.0.1</Property>
		6	<Property Name="NI.LVClass.ClassNameVisibleInProbe" Type="Bool">true</Property>
		7	<Property Name="NI.LVClass.DataValRefToSelfLimitedLibFlag" Type="Bool">true</Property>
		8	<Property Name="NI.LVClass.FlattenedPrivateDataCTL" Type="Bin">)1#!!!!!!!)!"1!&!!!-!%!!!@````]!!!!"!!%!!"(F5F.31QU+!!.-6E.$4%76Q!!$5A!!!3>!!!!)!!!$3A!!!!>!!!!!2BD<'&T=V^&>G&M>7&U;7^O,GRW9WRB=X-!!!!!!!#A)1#!!!!Q!!!I!!!!!!!!"!!$!$Q!P!!@1!!#!!!!!!%!!1!'`````Q!!!!!!!!!!!!!!!!_;TZB_!"^+H`^'418X@&M!!!!-!!!!%!!!!!&%3_;A?RU_3I`&8J)&I^=SV"W-W9]!MA4JA!G9\0B#@A!!!!!!!!!!H&$#XX)68UW"R;:/7]JOA%!!!$`````V"W-W9]!MA4JA!G9\0B#@A!!!"$H9QD1CX[J)6T7WCL2:&RJ!!!!"!!!!!!!!!!H!!&-6E.$!!!!!1!#6EF-1A!!!!"16%AQ!!!!"1!"!!%!!!!!!A!$!!!!!!)!!1!!!!!!)A!!!"RYH'.A9W"K9,D!!-3-1-T5Q01$S0Y!YD-!!'A"#$9!!!!!!%5!!!%9?RD9-!%`Y%!3$%S-$#>!.)M;/A'M;GM"F,C[\I/,-5$?S1E1:A7-?Y!-J!=KF[1@]"_1A&M7-Q'!(<V+"5!!!!!!!!-!!&73524!!!!!!!$!!!"1Q!!!JRYH(.A:'$).,9Q;Q$3T%#MS.$!ES@EML&!/1T1%!,%Q0&)!"KHB;;O/'"QWF!I-=PXQ,G>\OIM$48K0!QF@,^,V(B#(A"%GQ_QH'YWS0HO+-.7!F(&E-71]$`Q)TG)TRAX=D[@629$!]U6#ITF!I@<T2BB.A3#$7'Z@!/E-BB60O!?DA/0G4JH1A7[!32H3'-%M>>'(8%A/R?(M:!B$P1\!PL"LISCT%-N`.>NR"!]1_\C!#I4)A6!7%+A"2/U"%X'%1O@<VP6WA='&$#B-(+'Y!959%VG.A:!!ZHQE)1;<__@``PQV1B!EKJAA6!\&81NE;3(J/1M5=E/Q"[17:U!OE.;$MS6"W!^2>),'L1,I!SLY$D5]1_T&5(9D^#EA,1.E@A@1"+0M<F.U!D1VUWNH@R25Z4=$3'Q!#,WK2!!!!!"-!!!!?RD9'"A:'1!!A!!&!!$!!!!!!QB!)!!!!!%-D%O-!!!!!!-)1#!!!!!"$)R,D!!!!!!$#%!A!!!!!1S-3YQ!!!!!!QB!)!!!!!%-D%O-!!!!!!-)1#!!!!!"$)R,D!!!!!!&!%!!!$V6T7#?3;CD#ZT5EY'34G>!!!!$1!!!!!!!!!!!!!!!!!!!!!!!!#!`````Y!!!!'!!!!"A!!!!9!!!!'!!!!"A!!!!9!!!!'!!!!"A!!!!9!!!!'!!!!"A'!!!9'9!!''"A!"G!'!!;!!1!'Q!-!"L!.!!;-/Q!'A^5!"I#L!!;!V1!'A+M!"I$6!!;!KQ!'A.5!"G#O!!99W!!'"O!!"A'!!!@````]!!!1!````````````````````````````````````````````!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!``]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$``Q!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!0``!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!``]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$``Q!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!0``!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!``]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$``Q!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!0``!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!``]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!$``Q!!!!!!!!!!?(A!!!!!!!!!!!!!!!!!!!!!!!!!!0``!!!!!!!!?+SKK[RY!!!!!!!!!!!!!!!!!!!!!!!!``]!!!!!?+SKI[/DI[OM?!!!!!!!!!!!!!!!!!!!!!$``Q!!?+SKI[/DI[/DI[/LL(A!!!!!!!!!!!!!!!!!!0``!+OKI[/DI[/DI[/DI[/DK[Q!!!!!!!!!!!!!!!!!``]!KKKDI[/DI[/DI[/DI[0_KQ!!!!!!!!!!!!!!!!$``Q#KK[OKI[/DI[/DI[0_`P[K!!!!!!!!!!!!!!!!!0``!+KLK[OLKK/DI[0_`P\_`KI!!!!!!!!!!!!!!!!!``]!KKOLK[OLK[KM`P\_`P\_KA!!!!!!!!!!!!!!!!$``Q#KK[OLK[OLK`\_`P\_`P[K!!!!!!!!!!!!!!!!!0``!+KLK[OLK[OL`P\_`P\_`KI!!!!!!!!!!!!!!!!!``]!KKOLK[OLK[P_`P\_`P\_KA!!!!!!!!!!!!!!!!$``Q#KK[OLK[OLK`\_`P\_`P[K!!!!!!!!!!!!!!!!!0``!+KLK[OLK[OL`P\_`P\_`KI!!!!!!!!!!!!!!!!!``]!K[OLK[OLK[P_`P\_`P[LKQ!!!!!!!!!!!!!!!!$``Q!!J+KLK[OLK`\_`P[LL+1!!!!!!!!!!!!!!!!!!0``!!!!!+3LK[OL`P[LK[1!!!!!!!!!!!!!!!!!!!!!``]!!!!!!!#EK[OLK[-!!!!!!!!!!!!!!!!!!!!!!!$``Q!!!!!!!!!!J+-!!!!!!!!!!!!!!!!!!!!!!!!!!0```````````````````````````````````````````Q!!!!)!!1!!!!!!$!!"2F")5!!!!!!!!Q!!!!1!!!!!!!!#;1!!"/YH+W5T7M4524&\QODP)17X[3J>K!BM<T')MH'TRK-FP:V53F&C95O#D9Y]1.;IUV38<7<1=CC5!BE)84BFM87<C8Y'97OHBQ;(Z#^Q5"4O>S;:G343>'-#DU>S@`@=O?=Q!.)0.O:LQL9B"XB:>'%A+I4A(K#1O=4?QNMG@Q"%F+)#4.UG2XYGG4=B#&6D^&LIA1`/^5E2>[T1SQ^SR2M&D$BH+J@E/^RA`%0Y\RUROEK1ZDNEK:PB5>_U6UNBY+A46GHH#".)/+C'E4^T-PMBKX@P5HK'+X^P!B$[]R9V,W"'F0^ENS2[IX3H7$,+;D6;BYEN['90=9U-C2OD\MXA!EC]ZI<=:MW!TKJ"Q>%7G7L>ENK"]>Y8K?'YC^=494>[2%RSRM5;DA2C?(?S:#3&OT&+&(KL@S@!$\3-1)06(LA`SEG7#82N%(S;4B+8RHD<BMK<\VJDE<,=):>M&S8(BNO8#L/W#8Z19?$;54\7B0B'?7S`G#^H.;/Z^0&[J_0PNR]PJ5J:+.KJJ$ZV[#5U7LVN.<9OVMD))%LW#N?^EZK&;LO!!]0@1/IC0==$H:@BL68<DK,>R3^4:X&T=H@D^];GVP-OFT)AN?7+^A7/61`U!^9<X_`].[1_DB\<[QQCJ_.Q9%\W9<]M++^1!<M$K!G5:GJTOM<26(:V"9<QG>^;<69PP37KF5?DD=?>.KU2)/[X;V^:R[\A`M_"@[JK=(HQOOP`4."=NKJR=Q/:2<-?%54%8`-)7M.M18;$T<"^>R<@2?<J0D_L@X0,[IHPF\SU\#^FW&;/!!!!!!!!"!!!!#!!!!!%!!!!!!!!!!Q!!5%3&!!!!!!!!-!!!!%!!!!!!!!!')!!!"S?RD9'$)%Z"A_M>1^Z?"3?!LE#(^FY&:U)`R.Q-$JZ`!93$.+#!&<^S]!OK!U7VD[CS]%!";JMD"S3()=&/=!S(#U;$0```_@Y?O1;8-52(TB4::9]BQ1!&'):!!!!!!!!"!!!!!=!!!"J!!!!!1!!!#&@<GF@4'&T>%NO<X>O4X>O;7ZH4&:$<'&T=U.M>8.U:8)!!!!])1#!!!!!!!%!#!!Q`````Q!"!!!!!!!A!!!!!1!91&!!!""D<'&T=V^&>G&M>7&U;7^O!!!"!!!!!!!!!!!!!!!!"!!#!!A!!!!%!!!!1!!!!#A!!!!#!!!%!!!!!!%!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Y1!!!7&YH)W105\$1"#&P`5#32R_1J+#"GG2++BIO)!F"(8%!9"6<%?26BD&;YO3+X"($A!XY-5IEC$HD3;?40TXOQ#%R\Z`PSYM%"S.A__LJ`O7B];(Z@6SX6I/WK[UZD(Q&5WA`0<U.3R7,GK>.W5?VUN7R],F`PIW2>)S=&]9649<=G.UE(7QZ:B14^\N^6$X""&64+3NN8Y!4X<Z#8JWMP'NVT<-R,[$,D]FX^#[.AU.KTL0?YFYDDE#/2;RT,\">GCVXGLX039@-1QUC+[#"^I<+5);?-&9=`X(![9Q!!!!!!!'5!!1!#!!-!"!!!!%A!$Q1!!!!!$Q$9!.5!!!"2!!]%!!!!!!]!W!$6!!!!7A!0"!!!!!!0!.A!V1!!!'/!!)1!A!!!$Q$9!.5)5W6H<W5A65E)5W6H<W5A65E)5W6H<W5A65E"-!!!!&45E-.#A!$4&:$1UR#6F=!!!V)!!!%H1!!!#!!!!UI!!!!!!!!!!!!!!!A!!!!.!!!")A!!!!@4%F#4A!!!!!!!!'%4&:45A!!!!!!!!'95F242Q!!!!!!!!'M1U.46!!!!!!!!!(!4%FW;1!!!!!!!!(51U^/5!!!!!!!!!(I6%UY-!!!!!!!!!(]2%:%5Q!!!!!!!!)14%FE=Q!!!!!!!!)E6EF$2!!!!!!!!!)Y2U.%31!!!!!!!!->G6S=Q!!!!1!!!A5U.45A!!!!!!!!,%2U.15A!!!!!!!!,935.04A!!!!!!!!,M;7.M/!!!!!!!!!-!1V"$-A!!!!!!!!-54%FG=!!!!!!!!!-I2F"&?!!!!!!!!!-]2F")9A!!!!!!!!.12F"421!!!!!!!!.E6F"%5!!!!!!!!!.Y4%FC:!!!!!!!!!/-1E2&?!!!!!!!!!/A1E2)9A!!!!!!!!/U1E2421!!!!!!!!0)6EF55Q!!!!!!!!0=2&2)5!!!!!!!!!0Q466*2!!!!!!!!!1%3%F46!!!!!!!!!196E.55!!!!!!!!!1M2F2"1A!!!!!!!!2!!!!!!0````]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!E!!!!!!!!!!$`````!!!!!!!!!-A!!!!!!!!!!0````]!!!!!!!!!X!!!!!!!!!!!`````Q!!!!!!!!$E!!!!!!!!!!$`````!!!!!!!!!2!!!!!!!!!!!0````]!!!!!!!!"'!!!!!!!!!!!`````Q!!!!!!!!&!!!!!!!!!!!$`````!!!!!!!!!9Q!!!!!!!!!!0````]!!!!!!!!"H!!!!!!!!!!!`````Q!!!!!!!!,E!!!!!!!!!!4`````!!!!!!!!!PQ!!!!!!!!!"`````]!!!!!!!!$$!!!!!!!!!!)`````Q!!!!!!!!-=!!!!!!!!!!H`````!!!!!!!!!SQ!!!!!!!!!#P````]!!!!!!!!$0!!!!!!!!!!!`````Q!!!!!!!!.-!!!!!!!!!!$`````!!!!!!!!!W1!!!!!!!!!!0````]!!!!!!!!$?!!!!!!!!!!!`````Q!!!!!!!!0]!!!!!!!!!!$`````!!!!!!!!#!!!!!!!!!!!!0````]!!!!!!!!)#!!!!!!!!!!!`````Q!!!!!!!!A9!!!!!!!!!!$`````!!!!!!!!##!!!!!!!!!!!0````]!!!!!!!!+E!!!!!!!!!!!`````Q!!!!!!!!K9!!!!!!!!!!$`````!!!!!!!!#K!!!!!!!!!!!0````]!!!!!!!!+M!!!!!!!!!!!`````Q!!!!!!!!KY!!!!!!!!!!$`````!!!!!!!!#S!!!!!!!!!!!0````]!!!!!!!!,+!!!!!!!!!!!`````Q!!!!!!!!O9!!!!!!!!!!$`````!!!!!!!!#[!!!!!!!!!!!0````]!!!!!!!!,K!!!!!!!!!!!`````Q!!!!!!!!P5!!!!!!!!!)$`````!!!!!!!!$,Q!!!!!&'.M98.T8U6W97RV982J<WYO9X2M!!!!!!</Property>
		9	<Property Name="NI.LVClass.Geneology" Type="Xml"><String>
			No newline at end of file
		10	<Name></Name>
		11	<Val>!!!!!2BD<'&T=V^&>G&M>7&U;7^O,GRW9WRB=X-!5&2)-!!!!!!!!!!!!!!!!!!#!!%!!!!!!!!!!!!!!1!91&!!!""D<'&T=V^&>G&M>7&U;7^O!!!"!!!!!!!!!!!!!!!!!1Z-97*73568)%^C;G6D>!"16%AQ!!!!!!!!!!!!)1#!!!!!!!!!!!(``Q!!!!%!!!!!!!%!!!!!!1!91&!!!""D<'&T=V^&>G&M>7&U;7^O!!!"!!!!!!!"`````A!!!!!!!!%<9WRB=X.@1X6S=G6O>&2F=X2F=CZM>G.M98.T5&2)-!!!!!!!!!!!!#%!A!!!!!!!!!!!!!!!</Val>
			No newline at end of file
		12	</String>
		13	</Property>
			No newline at end of file
		14	<Property Name="NI.LVClass.IsTransferClass" Type="Bool">false</Property>
		15	<Property Name="NI.LVClass.LowestCompatibleVersion" Type="Str">1.0.0.1</Property>
			No newline at end of file
		16	<Item Name="Parent Libraries" Type="Parent Libraries">
		17	<Item Name="class_CurrentTester.lvclass" Type="Parent" URL="../../class_CurrentTester/class_CurrentTester.lvclass"/>
		18	</Item>
		19	<Item Name="class_Evaluation.ctl" Type="Class Private Data" URL="class_Evaluation.ctl">
		20	<Property Name="NI.LibItem.Scope" Type="Int">2</Property>
		21	</Item>
		22	</LVClass>
		23
		24	L24: rhodecode diff rendering error
		25	L25: rhodecode diff rendering error
		26	L26: rhodecode diff rendering error

0

builds/data/Initialization_Evaluation.ini created 10644 +109 0

			@@ -0,0 +1,109
		1	[Tester]
		2	TesterType = "Evaluation"
		3	TesterName = "Stromtester-Auswertung"
		4	SensorsEnable.<size(s)> = "15"
		5	SensorsEnable 0 = "True"
		6	SensorsEnable 1 = "True"
		7	SensorsEnable 2 = "True"
		8	SensorsEnable 3 = "True"
		9	SensorsEnable 4 = "True"
		10	SensorsEnable 5 = "True"
		11	SensorsEnable 6 = "True"
		12	SensorsEnable 7 = "True"
		13	SensorsEnable 8 = "True"
		14	SensorsEnable 9 = "True"
		15	SensorsEnable 10 = "True"
		16	SensorsEnable 11 = "True"
		17	SensorsEnable 12 = "True"
		18	SensorsEnable 13 = "True"
		19	SensorsEnable 14 = "True"
		20
		21	[Hardware]
		22	SimulateDevices = False
		23
		24	[DefaultValues]
		25	SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218"
		26
		27	[Pathes]
		28	User = "\\orion\labview\CurrentTester\support\User.txt"
		29	ReportsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
		30	ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
		31	CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
		32	Applicants = "\\orion\labview\CurrentTester\support\Applicants.txt"
		33
		34	[Report]
		35	FileNameFormat = "%s_TestResults.txt"
		36	ReportNameFormat = "%s_TestReport_%s.xlsx"
		37	ReportTemplate_German = "\\orion\labview\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
		38	ReportTemplate_English = "\\orion\labview\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
		39
		40	[Protocol]
		41	ProtocolNameFormat = "%s_A%d_Report_%s.docx"
		42	ProtocolTemplate_German = "\\orion\labview\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
		43	ProtocolTemplate_English = "\\orion\labview\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
		44	ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
		45	ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
		46	ProtocolDataFolderName = "Bilder\|Messungen"
		47	ProtocolFolderFormat = "%s_%s_Stromtest"
		48
		49	[StateMessages]
		50	Info.<size(s)> = "23"
		51	Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
		52	Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
		53	Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
		54	Info 3 = "Testdaten anlegen"
		55	Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
		56	Info 5 = "Test geladen"
		57	Info 6 = "Laufende Pr�fung..."
		58	Info 7 = "Pr�fung erfolgreich abgeschlossen"
		59	Info 8 = "Fehler aufgetreten!"
		60	Info 9 = "Test abgebrochen!"
		61	Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
		62	Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
		63	Info 12 = "Test abgebrochen! Messrate ist zu hoch"
		64	Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
		65	Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"
		66	Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"
		67	Info 16 = "Testprotokoll wird erstellt... Bitte warten"
		68	Info 17 = "Testprotokoll erstellt"
		69	Info 18 = "Der letzte Test ist geladen..."
		70	Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen"
		71	Info 20 = "Testbericht wird erstellt... Bitte warten"
		72	Info 21 = "Testbericht erstellt"
		73	Info 22 = "Test ist gespeichert"
		74	Result.<size(s)> = "23"
		75	Result 0 = "Not-Halt"
		76	Result 1 = ""
		77	Result 2 = "Bereit"
		78	Result 3 = "Bereit"
		79	Result 4 = "Einrichtbetrieb"
		80	Result 5 = "Bereit"
		81	Result 6 = "Pr�fung l�uft"
		82	Result 7 = "Pr�fung fertig"
		83	Result 8 = "Fehler"
		84	Result 9 = "Pr�fung Stop"
		85	Result 10 = "Pr�fung Stop"
		86	Result 11 = "Pr�fung Stop"
		87	Result 12 = "Pr�fung Stop"
		88	Result 13 = "Pr�fung Stop"
		89	Result 14 = "Pr�fung Stop"
		90	Result 15 = "Pr�fung Stop"
		91	Result 16 = "Bereit"
		92	Result 17 = "Bereit"
		93	Result 18 = "Bereit"
		94	Result 19 = "Bereit"
		95	Result 20 = "Bereit"
		96	Result 21 = "Bereit"
		97	Result 22 = "Bereit"
		98
		99	[DialogMessages]
		100	Messages.<size(s)> = "9"
		101	Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
		102	Messages 1 = "Bitte achten Sie darauf, dass alle Felder in der gew�hlten Sprache sind"
		103	Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass alle Felder in der gew�hlten Sprache sind"
		104	Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"
		105	Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
		106	Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
		107	Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
		108	Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
		109	Messages 8 = "Sollen die Testmessdaten zur sp�teren Testberichtserstellung au�erhalb des Stromtesters in das unten stehende Verzeichnis im Netzwerk kopiert werden?" No newline at end of file

0

CurrentTester [LabVIEW]/CurrentTester.lvproj +2 0

              		<Item Name="class_SMP3.lvclass" Type="LVClass" URL="../class_SMP3/class_SMP3.lvclass"/>
              		<Item Name="class_HSMP1.lvclass" Type="LVClass" URL="../class_HSMP1/class_HSMP1.lvclass"/>
              		<Item Name="class_HSMP2.lvclass" Type="LVClass" URL="../class_HSMP2/class_HSMP2.lvclass"/>
+             		<Item Name="class_Evaluation.lvclass" Type="LVClass" URL="../class_Evaluation/class_Evaluation.lvclass"/>
              		<Item Name="CurrentTester.vi" Type="VI" URL="../CurrentTester.vi"/>
              		<Item Name="Initialization.ini" Type="Document" URL="../Initialization.ini"/>
              		<Item Name="Initialization_HSMP1.ini" Type="Document" URL="../Initialization_HSMP1.ini"/>
              		<Item Name="Initialization_SMP3.ini" Type="Document" URL="../Initialization_SMP3.ini"/>
              		<Item Name="Initialization_HSMP2.ini" Type="Document" URL="../Initialization_HSMP2.ini"/>
+             		<Item Name="Initialization_Evaluation.ini" Type="Document" URL="../Initialization_Evaluation.ini"/>
              		<Item Name="Dependencies" Type="Dependencies">
              			<Item Name="vi.lib" Type="Folder">
              				<Item Name="BuildHelpPath.vi" Type="VI" URL="/&lt;vilib&gt;/Utility/error.llb/BuildHelpPath.vi"/>

0

CurrentTester [LabVIEW]/CurrentTester.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/Initialization.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

CurrentTester [LabVIEW]/Initialization_HSMP1.ini +2 -2

              [Pathes]
              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1"
-             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

CurrentTester [LabVIEW]/Initialization_HSMP2.ini +2 -2

              [Pathes]
              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2"
-             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

CurrentTester [LabVIEW]/Initialization_SMP3.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cCurrentTestConfig.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cCurrentTestData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cDefaultValues.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cEventMessage.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cHardware.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cMovingParameter.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cNotepadEntry.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cNotifiers.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cPathes.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cPosition.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolConfiguration.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolResults.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolTestsData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRefs_Axes.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRefs_Notepad.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cReportConfiguration.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cRunStatesMain.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cScale.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cSystem.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTestBasicData(TestType).ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTestBasicData.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTester.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTesterType.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eButtonsState.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eCurveSelection.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eDurationConversionFunction.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eLearningButtonsOption.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eOperationCurrent.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eOperationSystem.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eState.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eStopOperation.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eSubpanel.ctl 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Error.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Measure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read DVR_Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read ErrorMessage.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read Semaphore.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TemperatureSensors.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TestResultsTimestamps.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read TesterType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read cCurrentTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read cTestBasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read evHmiData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read pConfiguration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Read pTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Error.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Measure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write DVR_Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write ErrorMessage.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write Semaphore.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TemperatureSensors.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TestResultsTimestamps.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write TesterType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write cCurrentTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write cTestBasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write evHmiData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write pConfiguration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/DataMemberAccess/Write pTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ControlLearningButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_GetResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/DMM_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Delete_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Init_AxesControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PerformMeasurements_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_DisableAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_GetPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PositioningUnit_Move.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_GetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_GetPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_Reset.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/PowerSupply_SetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ReadE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/ReinitPositioningUnit_HSMP2.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Activate.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Stop_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/TableControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/UpdateAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/UpdateForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/WriteForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/WritePressure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/AddNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/AddValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/BuildName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CalcIntervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CalcResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ChangeGraphResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckAbsolutePosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckPIDTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTemperatureLimits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfigChanged.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckVoltageLimits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ClearNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CloseEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ConvertDuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CreateICTNotifiers.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Delay.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Delay_GetPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DeleteEntryNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DeleteICTNotifiers.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DetectError.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogCopy.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogCurrentChart.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogError.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogPwInput.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ExecuteDialogCurrentChart.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ExtendTestResult.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/FillStandardValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetAssemblies.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetAutomaticReportData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetCableSize.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetChildClass.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetCurrentProfileGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetMethodReference.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetReportName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetStartPath.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTemperatureSensorsEnable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTemperatureSensorsType.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTestIDs.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/HashtagTxtToArray.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Finish.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Start.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraphCurves.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/InitGraphCurves_Protocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadChildClass.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadStandardValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadVIInSubPanel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/MultiplySelectedValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PID.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PerformMeasurements.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CreateProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Delete.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetDestinationFolder.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetMeasurementsPathes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetProtocolName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetReports.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_InitCommonGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests_Statistic_Limits.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Move.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_Selection.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_GetIntervalIndexes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_TableCustomFormatting.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_WriteResults_TableData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ReadFiles.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ReadTestResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Read_AIs_.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RegEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RemoveValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/RoundToNextPoint1.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SaveTestConfig.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SelectEntryNotepad.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SelectIntervalsCurrentProfileTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SetEvent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Setup_GetCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Simulation.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/StopSubPanelVI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/StripName.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateCurrentProfileTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateCurrentProfileTableIntervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraph.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraphCurves.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateGraph_DataIndex.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/UpdateTestDataTable.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/VisualisePosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_CurrentProfile.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals_HideCurrentValuesCalculationRows.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel_Intervals_Rename_Delete.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedAutomaticReport.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedComment.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedMaxTemp.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCurrent.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvInfo.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvMoveStop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvMoving.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvPower.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvStop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvStopSubPanel.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvSystem.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/DisplayResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Config.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass 0 0

	1		NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP1/class_HSMP1.lvclass +1 -1

              		</Item>
              		<Item Name="Test" Type="Folder">
              			<Item Name="Test_LoadOldINI.vi" Type="VI" URL="../OverrideVIs/Test_LoadOldINI.vi">
-             				<Property Name="NI.ClassItem.ConnectorPane" Type="Bin">)1#!!!!!!!)!"1!&amp;!!!-!%!!!@````]!!!!"!!%!!!0_!!!!)A!-1#%'=X2B&gt;(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&amp;!!!Q!!!!%!!AFF=H*P=C"P&gt;81!%U!+!!V8&lt;X*L;7ZH5X2S&lt;WNF!!V!#A!(4H6N:8*J9Q!=1%!!!@````]!"1Z.98B5:7VQ:8*B&gt;(6S:1!!&amp;5!+!!^.:7&amp;T&gt;8*F&lt;76O&gt;&amp;2J&lt;75!&amp;5!+!!Z/&lt;WVJ&lt;G&amp;M1X6S=G6O&gt;!!!(%"!!!(`````!!5/2(6S982J&lt;WZ797RV:8-!!"J!1!!"`````Q!&amp;$5.V=H*F&lt;H2797RV:8-!%E!B$&amp;2B9GRF1W^O&gt;(*P&lt;!!!&amp;U!'!""";8*$&lt;W^M;7ZH4X"U;7^O!!!=1%!!!@````]!"1Z1=G6T=X6S:6:B&lt;(6F=Q!!;Q$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T&amp;G.$&gt;8*S:7ZU6'6T&gt;%.P&lt;G:J:SZD&gt;'Q!-%"1!!E!"!!'!!=!#!!*!!I!#Q!-!!U39U.V=H*F&lt;H25:8.U1W^O:GFH!!":!0%!!!!!!!!!!BND&lt;'&amp;T=V^$&gt;8*S:7ZU6'6T&gt;'6S,GRW9WRB=X-09V2F=X2F=F2Z='5O9X2M!#6!&amp;Q!$"&amp;..5$-&amp;3&amp;..5$%&amp;3&amp;..5$)!!!:5:8.U:8)!!""!-0````]'6'6T&gt;%F%!!!31$$`````#6.V9G:P&lt;'2F=A!/1$$`````"&amp;6T:8)!!!Z!-0````]%4G&amp;N:1!!%%!Q`````Q&gt;$&lt;WVN:7ZU!"2!-0````]+1W^N&lt;76O&gt;&amp;^&amp;4A!!%%!Q`````Q:4&gt;(*J&lt;G=!!#"!1!!"`````Q!7%F2F&lt;8"F=G&amp;U&gt;8*F5W6O=W^S=Q!!)E"!!!(`````!"966'6N='6S982V=G64:7ZT&lt;X*T8U6/!!R!)1:3:8"P=H1!!!Z!)1F3:8"P=H2@25Y!=1$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T('.5:8.U1G&amp;T;7.%982B+&amp;2F=X25?8"F+3ZD&gt;'Q!-%"1!!M!$Q!1!"%!%A!4!"1!&amp;1!8!"A!'1!;$G.5:8.U1G&amp;T;7.%982B!!!%!!!!$5!"!!&gt;7:8*T;7^O!#B!=!!?!!!6%W.M98.T8UB446!R,GRW9WRB=X-!#5.M98.T)%^V&gt;!!I1(!!(A!!&amp;2.D&lt;'&amp;T=V^)5UV1-3ZM&gt;G.M98.T!!B$&lt;'&amp;T=S"*&lt;A!!)%"1!!-!!!!"!!)4:8*S&lt;X)A;7YA+'ZP)'6S=G^S+1"5!0!!$!!$!!Y!'Q!=!"U!(A!=!"]!)!!=!"Q!(!-!!(A!!!U)!!!*!!!!#1!!!!!!!!!*!!!!D1=!!!!!!!#1!!!!#A!!!!!!!!!!!!!!!!!!!!!"!#%!!!!!</Property>
+             				<Property Name="NI.ClassItem.ConnectorPane" Type="Bin">)1#!!!!!!!)!"1!&amp;!!!-!%!!!@````]!!!!"!!%!!!1)!!!!)A!-1#%'=X2B&gt;(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&amp;!!!Q!!!!%!!AFF=H*P=C"P&gt;81!%U!+!!V8&lt;X*L;7ZH5X2S&lt;WNF!!V!#A!(4H6N:8*J9Q!=1%!!!@````]!"1Z.98B5:7VQ:8*B&gt;(6S:1!!&amp;5!+!!^.:7&amp;T&gt;8*F&lt;76O&gt;&amp;2J&lt;75!&amp;5!+!!Z/&lt;WVJ&lt;G&amp;M1X6S=G6O&gt;!!!(%"!!!(`````!!5/2(6S982J&lt;WZ797RV:8-!!"J!1!!"`````Q!&amp;$5.V=H*F&lt;H2797RV:8-!%E!B$&amp;2B9GRF1W^O&gt;(*P&lt;!!!&amp;U!'!""";8*$&lt;W^M;7ZH4X"U;7^O!!!=1%!!!@````]!"1Z1=G6T=X6S:6:B&lt;(6F=Q!!;Q$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T&amp;G.$&gt;8*S:7ZU6'6T&gt;%.P&lt;G:J:SZD&gt;'Q!-%"1!!E!"!!'!!=!#!!*!!I!#Q!-!!U39U.V=H*F&lt;H25:8.U1W^O:GFH!!"D!0%!!!!!!!!!!BND&lt;'&amp;T=V^$&gt;8*S:7ZU6'6T&gt;'6S,GRW9WRB=X-09V2F=X2F=F2Z='5O9X2M!#^!&amp;Q!%"&amp;..5$-&amp;3&amp;..5$%&amp;3&amp;..5$)+28:B&lt;(6B&gt;'FP&lt;A!'6'6T&gt;'6S!!!11$$`````"F2F=X2*2!!!%E!Q`````QF4&gt;7*G&lt;WRE:8)!$E!Q`````Q26=W6S!!!/1$$`````"%ZB&lt;75!!""!-0````](1W^N&lt;76O&gt;!!51$$`````#E.P&lt;7VF&lt;H2@25Y!!""!-0````]'5X2S;7ZH!!!A1%!!!@````]!&amp;B*5:7VQ:8*B&gt;(6S:6.F&lt;H.P=H-!!#*!1!!"`````Q!7&amp;62F&lt;8"F=G&amp;U&gt;8*F5W6O=W^S=V^&amp;4A!-1#%'5G6Q&lt;X*U!!!/1#%*5G6Q&lt;X*U8U6/!(%!]1!!!!!!!!!#'W.M98.T8U.V=H*F&lt;H25:8.U:8)O&lt;(:D&lt;'&amp;T=RRD6'6T&gt;%*B=WFD2'&amp;U93B5:8.U6(FQ:3EO9X2M!$"!5!!,!!]!%!!2!")!%Q!5!"5!&amp;Q!9!"E!'AZD6'6T&gt;%*B=WFD2'&amp;U91!!"!!!!!V!!1!(6G6S=WFP&lt;A!I1(!!(A!!&amp;2.D&lt;'&amp;T=V^)5UV1-3ZM&gt;G.M98.T!!F$&lt;'&amp;T=S"0&gt;81!+%"Q!"Y!!"549WRB=X.@3&amp;..5$%O&lt;(:D&lt;'&amp;T=Q!)1WRB=X-A37Y!!#"!5!!$!!!!!1!#%W6S=G^S)'FO)#BO&lt;S"F=H*P=CE!6!$Q!!Q!!Q!/!"M!(!!&gt;!"Y!(!!@!#!!(!!=!"Q$!!"Y!!!.#!!!#1!!!!E!!!!!!!!!#1!!!)U(!!!!!!!!E!!!!!I!!!!!!!!!!!!!!!!!!!!!!1!B!!!!!!</Property>
              				<Property Name="NI.ClassItem.ExecutionSystem" Type="Int">-1</Property>
              				<Property Name="NI.ClassItem.Flags" Type="Int">0</Property>
              				<Property Name="NI.ClassItem.IsStaticMethod" Type="Bool">false</Property>

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ControlLearningButtons.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/DMM_GetResistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Init_AxesControl.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_Close.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_DisableAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_GetPosition.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_Init.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ReadE-Stop.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateAxes.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WriteForceLimit.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WritePressure.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/VisualiseInsetData.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/WriteAO.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Create_DVR.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/GetMeasurementTime.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Measurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Resistance.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Temperatures.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Voltages.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldINI.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldResults.vi 0 0

1

NO CONTENT: modified file

0

CurrentTester [LabVIEW]/class_SMP3/class_SMP3.lvclass +1 -1

              		</Item>
              		<Item Name="Test" Type="Folder">
              			<Item Name="Test_LoadOldINI.vi" Type="VI" URL="../OverrideVIs/Test_LoadOldINI.vi">
-             				<Property Name="NI.ClassItem.ConnectorPane" Type="Bin">)1#!!!!!!!)!"1!&amp;!!!-!%!!!@````]!!!!"!!%!!!0_!!!!)A!-1#%'=X2B&gt;(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&amp;!!!Q!!!!%!!AFF=H*P=C"P&gt;81!%U!+!!V8&lt;X*L;7ZH5X2S&lt;WNF!!V!#A!(4H6N:8*J9Q!=1%!!!@````]!"1Z.98B5:7VQ:8*B&gt;(6S:1!!&amp;5!+!!^.:7&amp;T&gt;8*F&lt;76O&gt;&amp;2J&lt;75!&amp;5!+!!Z/&lt;WVJ&lt;G&amp;M1X6S=G6O&gt;!!!(%"!!!(`````!!5/2(6S982J&lt;WZ797RV:8-!!"J!1!!"`````Q!&amp;$5.V=H*F&lt;H2797RV:8-!%E!B$&amp;2B9GRF1W^O&gt;(*P&lt;!!!&amp;U!'!""";8*$&lt;W^M;7ZH4X"U;7^O!!!=1%!!!@````]!"1Z1=G6T=X6S:6:B&lt;(6F=Q!!;Q$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T&amp;G.$&gt;8*S:7ZU6'6T&gt;%.P&lt;G:J:SZD&gt;'Q!-%"1!!E!"!!'!!=!#!!*!!I!#Q!-!!U39U.V=H*F&lt;H25:8.U1W^O:GFH!!":!0%!!!!!!!!!!BND&lt;'&amp;T=V^$&gt;8*S:7ZU6'6T&gt;'6S,GRW9WRB=X-09V2F=X2F=F2Z='5O9X2M!#6!&amp;Q!$"&amp;..5$-&amp;3&amp;..5$%&amp;3&amp;..5$)!!!:5:8.U:8)!!""!-0````]'6'6T&gt;%F%!!!31$$`````#6.V9G:P&lt;'2F=A!/1$$`````"&amp;6T:8)!!!Z!-0````]%4G&amp;N:1!!%%!Q`````Q&gt;$&lt;WVN:7ZU!"2!-0````]+1W^N&lt;76O&gt;&amp;^&amp;4A!!%%!Q`````Q:4&gt;(*J&lt;G=!!#"!1!!"`````Q!7%F2F&lt;8"F=G&amp;U&gt;8*F5W6O=W^S=Q!!)E"!!!(`````!"966'6N='6S982V=G64:7ZT&lt;X*T8U6/!!R!)1:3:8"P=H1!!!Z!)1F3:8"P=H2@25Y!=1$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T('.5:8.U1G&amp;T;7.%982B+&amp;2F=X25?8"F+3ZD&gt;'Q!-%"1!!M!$Q!1!"%!%A!4!"1!&amp;1!8!"A!'1!;$G.5:8.U1G&amp;T;7.%982B!!!%!!!!$5!"!!&gt;7:8*T;7^O!#B!=!!?!!!5%G.M98.T8V..5$-O&lt;(:D&lt;'&amp;T=Q!!#5.M98.T)%^V&gt;!!I1(!!(A!!&amp;"*D&lt;'&amp;T=V^446!T,GRW9WRB=X-!!!B$&lt;'&amp;T=S"*&lt;A!!)%"1!!-!!!!"!!)4:8*S&lt;X)A;7YA+'ZP)'6S=G^S+1"5!0!!$!!$!!Y!'Q!=!"U!(A!=!"]!)!!=!"Q!(!-!!(A!!!U)!!!*!!!!#1!!!!!!!!!*!!!!D1=!!!!!!!#1!!!!#A!!!!!!!!!!!!!!!!!!!!!"!#%!!!!!</Property>
+             				<Property Name="NI.ClassItem.ConnectorPane" Type="Bin">)1#!!!!!!!)!"1!&amp;!!!-!%!!!@````]!!!!"!!%!!!1)!!!!)A!-1#%'=X2B&gt;(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&amp;!!!Q!!!!%!!AFF=H*P=C"P&gt;81!%U!+!!V8&lt;X*L;7ZH5X2S&lt;WNF!!V!#A!(4H6N:8*J9Q!=1%!!!@````]!"1Z.98B5:7VQ:8*B&gt;(6S:1!!&amp;5!+!!^.:7&amp;T&gt;8*F&lt;76O&gt;&amp;2J&lt;75!&amp;5!+!!Z/&lt;WVJ&lt;G&amp;M1X6S=G6O&gt;!!!(%"!!!(`````!!5/2(6S982J&lt;WZ797RV:8-!!"J!1!!"`````Q!&amp;$5.V=H*F&lt;H2797RV:8-!%E!B$&amp;2B9GRF1W^O&gt;(*P&lt;!!!&amp;U!'!""";8*$&lt;W^M;7ZH4X"U;7^O!!!=1%!!!@````]!"1Z1=G6T=X6S:6:B&lt;(6F=Q!!;Q$R!!!!!!!!!!)&lt;9WRB=X.@1X6S=G6O&gt;&amp;2F=X2F=CZM&gt;G.M98.T&amp;G.$&gt;8*S:7ZU6'6T&gt;%.P&lt;G:J:SZD&gt;'Q!-%"1!!E!"!!'!!=!#!!*!!I!#Q!-!!U39U.V=H*F&lt;H25:8.U1W^O:GFH!!"D!0%!!!!!!!!!!BND&lt;'&amp;T=V^$&gt;8*S:7ZU6'6T&gt;'6S,GRW9WRB=X-09V2F=X2F=F2Z='5O9X2M!#^!&amp;Q!%"&amp;..5$-&amp;3&amp;..5$%&amp;3&amp;..5$)+28:B&lt;(6B&gt;'FP&lt;A!'6'6T&gt;'6S!!!11$$`````"F2F=X2*2!!!%E!Q`````QF4&gt;7*G&lt;WRE:8)!$E!Q`````Q26=W6S!!!/1$$`````"%ZB&lt;75!!""!-0````](1W^N&lt;76O&gt;!!51$$`````#E.P&lt;7VF&lt;H2@25Y!!""!-0````]'5X2S;7ZH!!!A1%!!!@````]!&amp;B*5:7VQ:8*B&gt;(6S:6.F&lt;H.P=H-!!#*!1!!"`````Q!7&amp;62F&lt;8"F=G&amp;U&gt;8*F5W6O=W^S=V^&amp;4A!-1#%'5G6Q&lt;X*U!!!/1#%*5G6Q&lt;X*U8U6/!(%!]1!!!!!!!!!#'W.M98.T8U.V=H*F&lt;H25:8.U:8)O&lt;(:D&lt;'&amp;T=RRD6'6T&gt;%*B=WFD2'&amp;U93B5:8.U6(FQ:3EO9X2M!$"!5!!,!!]!%!!2!")!%Q!5!"5!&amp;Q!9!"E!'AZD6'6T&gt;%*B=WFD2'&amp;U91!!"!!!!!V!!1!(6G6S=WFP&lt;A!I1(!!(A!!&amp;"*D&lt;'&amp;T=V^446!T,GRW9WRB=X-!!!F$&lt;'&amp;T=S"0&gt;81!+%"Q!"Y!!"139WRB=X.@5UV1-SZM&gt;G.M98.T!!!)1WRB=X-A37Y!!#"!5!!$!!!!!1!#%W6S=G^S)'FO)#BO&lt;S"F=H*P=CE!6!$Q!!Q!!Q!/!"M!(!!&gt;!"Y!(!!@!#!!(!!=!"Q$!!"Y!!!.#!!!#1!!!!E!!!!!!!!!#1!!!)U(!!!!!!!!E!!!!!I!!!!!!!!!!!!!!!!!!!!!!1!B!!!!!!</Property>
              				<Property Name="NI.ClassItem.ExecutionSystem" Type="Int">-1</Property>
              				<Property Name="NI.ClassItem.Flags" Type="Int">0</Property>
              				<Property Name="NI.ClassItem.IsStaticMethod" Type="Bool">false</Property>

0

builds/CurrentTester.exe 0 0

1

NO CONTENT: modified file

0

builds/data/Initialization.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

builds/data/Initialization_HSMP1.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\ResultData"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

builds/data/Initialization_HSMP2.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

0

builds/data/Initialization_SMP3.ini +1 -1

              User = "C:\Work\CurrentTester\support\User.txt"
              ReportsFolder = "C:\Work\CurrentTester\support\ResultData"
              ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
-             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
+             CurrentProfilesFolder = "\\orion\labview\CurrentTester\support\CurrentProfiles"
              Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
              [Report]

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

The requested changes are too big and content was truncated. Show full diff