Show More
The requested changes are too big and content was truncated. Show full diff
| 1 | NO CONTENT: new file 10644 |
|
NO CONTENT: new file 10644 |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| @@ -1,329 +1,441 | |||||
| 1 | [Tester] |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP2" |
|
2 | TesterType = "HSMP2" | |
| 3 | TesterName = "Hochstrommessplatz 2" |
|
3 | TesterName = "Hochstrommessplatz 2" | |
| 4 | MaxCurrent = 2000 |
|
4 | MaxCurrent = 2000 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| 6 |
SensorsEnable.<size(s)> = "1 |
|
6 | SensorsEnable.<size(s)> = "15" | |
| 7 | SensorsEnable 0 = "True" |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" |
|
13 | SensorsEnable 6 = "True" | |
| 14 | SensorsEnable 7 = "False" |
|
14 | SensorsEnable 7 = "False" | |
| 15 | SensorsEnable 8 = "False" |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| 17 | SensorsDescription.<size(s)> = "10" |
|
17 | SensorsEnable 10 = "False" | |
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
22 | SensorsDescription.<size(s)> = "15" | |||
| 18 | SensorsDescription 0 = "NI-9212: Ch1" |
|
23 | SensorsDescription 0 = "NI-9212: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9212: Ch2" |
|
24 | SensorsDescription 1 = "NI-9212: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9212: Ch3" |
|
25 | SensorsDescription 2 = "NI-9212: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9212: Ch4" |
|
26 | SensorsDescription 3 = "NI-9212: Ch4" | |
| 22 | SensorsDescription 4 = "NI-9219: Ch1" |
|
27 | SensorsDescription 4 = "NI-9219_1: Ch1" | |
| 23 | SensorsDescription 5 = "NI-9219: Ch2" |
|
28 | SensorsDescription 5 = "NI-9219_1: Ch2" | |
| 24 | SensorsDescription 6 = "NI-9219: Ch3" |
|
29 | SensorsDescription 6 = "NI-9219_1: Ch3" | |
| 25 | SensorsDescription 7 = "" |
|
30 | SensorsDescription 7 = "NI-9219_2: Ch1" | |
| 26 | SensorsDescription 8 = "" |
|
31 | SensorsDescription 8 = "NI-9219_2: Ch2" | |
| 27 | SensorsDescription 9 = "" |
|
32 | SensorsDescription 9 = "NI-9219_2: Ch3" | |
|
|
33 | SensorsDescription 10 = "NI-9219_2: Ch4" | |||
|
|
34 | SensorsDescription 11 = "NI-9219_3: Ch1" | |||
|
|
35 | SensorsDescription 12 = "NI-9219_3: Ch2" | |||
|
|
36 | SensorsDescription 13 = "NI-9219_3: Ch3" | |||
|
|
37 | SensorsDescription 14 = "NI-9219_3: Ch4" | |||
| 28 | VoltageDescription.<size(s)> = "4 2" |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI-9215: Ch1" |
|
39 | VoltageDescription 0 = "NI-9215: Ch1" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI-9215: Ch2" |
|
41 | VoltageDescription 2 = "NI-9215: Ch2" | |
| 32 | VoltageDescription 3 = "Zero Flux- Spannung [V]" |
|
42 | VoltageDescription 3 = "Zero Flux- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 |
|
48 | |||
| 39 | [Hardware] |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "" |
|
51 | DI_E-Stop = "" | |
| 42 | DI_Setup = "" |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM4" |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "0" |
|
54 | PowerSupply_Address = "0" | |
| 45 | PowerSupply_Baudrate = "9600" |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "10,000000" |
|
56 | PowerSupply_OutputVoltage = "10,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,800000" |
|
57 | PowerSupply_OverVoltageProtection = "9,800000" | |
| 48 | PowerSupply_MinCurrent = "0" |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "18000,000000" |
|
60 | PowerSupply_WarningPower = "18000,000000" | |
| 51 | PowerSupply_AbortPower = "20000,000000" |
|
61 | PowerSupply_AbortPower = "20000,000000" | |
| 52 | PowerSupply_PID = "FALSE" |
|
62 | PowerSupply_PID = "FALSE" | |
| 53 | PowerSupply_PID_Time = "0,100000" |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0,000000" |
|
67 | AbortCurrentDifference = "0,000000" | |
| 58 |
Measurement_Channels.<size(s)> = "1 |
|
68 | Measurement_Channels.<size(s)> = "17" | |
| 59 | Measurement_Channels 0 = "NI9215/ai0" |
|
69 | Measurement_Channels 0 = "NI9215/ai0" | |
| 60 | Measurement_Channels 1 = "NI9215/ai1" |
|
70 | Measurement_Channels 1 = "NI9215/ai1" | |
| 61 | Measurement_Channels 2 = "NI9212/ai0" |
|
71 | Measurement_Channels 2 = "NI9212/ai0" | |
| 62 | Measurement_Channels 3 = "NI9212/ai1" |
|
72 | Measurement_Channels 3 = "NI9212/ai1" | |
| 63 | Measurement_Channels 4 = "NI9212/ai2" |
|
73 | Measurement_Channels 4 = "NI9212/ai2" | |
| 64 | Measurement_Channels 5 = "NI9212/ai3" |
|
74 | Measurement_Channels 5 = "NI9212/ai3" | |
| 65 | Measurement_Channels 6 = "NI9219/ai0" |
|
75 | Measurement_Channels 6 = "NI9219_1/ai0" | |
| 66 | Measurement_Channels 7 = "NI9219/ai1" |
|
76 | Measurement_Channels 7 = "NI9219_1/ai1" | |
| 67 | Measurement_Channels 8 = "NI9219/ai2" |
|
77 | Measurement_Channels 8 = "NI9219_1/ai2" | |
| 68 | Measurement_Channels 9 = "" |
|
78 | Measurement_Channels 9 = "NI9219_2/ai0" | |
| 69 | Measurement_Channels 10 = "" |
|
79 | Measurement_Channels 10 = "NI9219_2/ai1" | |
| 70 | Measurement_Channels 11 = "" |
|
80 | Measurement_Channels 11 = "NI9219_2/ai2" | |
| 71 | Measurement_Channels 12 = "" |
|
81 | Measurement_Channels 12 = "NI9219_2/ai3" | |
|
|
82 | Measurement_Channels 13 = "NI9219_3/ai0" | |||
|
|
83 | Measurement_Channels 14 = "NI9219_3/ai1" | |||
|
|
84 | Measurement_Channels 15 = "NI9219_3/ai2" | |||
|
|
85 | Measurement_Channels 16 = "NI9219_3/ai3" | |||
| 72 | ShuntResistance = "0,005" |
|
86 | ShuntResistance = "0,005" | |
| 73 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| 74 | DMM_VISAName = "NI9219/ai3" |
|
88 | DMM_VISAName = "NI9219_1/ai3" | |
| 75 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" | |
| 76 |
TemperatureGain = "<size(s)=1 |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 77 |
TemperatureOffset = "<size(s)=1 |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" | |
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" |
|
94 | AllowedContactFails = "2" | |
| 81 |
|
95 | |||
| 82 | [HSMP2] |
|
96 | [HSMP2] | |
| 83 | DMM_Configuration.Maximum = "10,000000" |
|
97 | DMM_Configuration.Maximum = "10,000000" | |
| 84 | DMM_Configuration.Minimum = "0,000000" |
|
98 | DMM_Configuration.Minimum = "0,000000" | |
| 85 | DMM_Configuration.Configuration = "2-Wire" |
|
99 | DMM_Configuration.Configuration = "2-Wire" | |
| 86 | DMM_Configuration.CurrentExcitationSource = "Internal" |
|
100 | DMM_Configuration.CurrentExcitationSource = "Internal" | |
| 87 | DMM_Configuration.CurrentExcitationValue = "0,000500" |
|
101 | DMM_Configuration.CurrentExcitationValue = "0,000500" | |
| 88 | Configuration_AI_Voltage.<size(s)> = "2" |
|
102 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 89 | Configuration_AI_Voltage 0.Maximum = "10,000000" |
|
103 | Configuration_AI_Voltage 0.Maximum = "10,000000" | |
| 90 | Configuration_AI_Voltage 0.Minimum = "-10,000000" |
|
104 | Configuration_AI_Voltage 0.Minimum = "-10,000000" | |
| 91 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" |
|
105 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 92 | Configuration_AI_Voltage 1.Maximum = "10,000000" |
|
106 | Configuration_AI_Voltage 1.Maximum = "10,000000" | |
| 93 | Configuration_AI_Voltage 1.Minimum = "0,000000" |
|
107 | Configuration_AI_Voltage 1.Minimum = "0,000000" | |
| 94 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
108 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| 95 |
Configuration_AI_Thermocouple.<size(s)> = "1 |
|
109 | Configuration_AI_Thermocouple.<size(s)> = "15" | |
| 96 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" |
|
110 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 97 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" |
|
111 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 98 | Configuration_AI_Thermocouple 0.Type = "K" |
|
112 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 99 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" |
|
113 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 100 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" |
|
114 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" |
|
115 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 102 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" |
|
116 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 103 | Configuration_AI_Thermocouple 1.Type = "K" |
|
117 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 104 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" |
|
118 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 105 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" |
|
119 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" |
|
120 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 107 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" |
|
121 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 108 | Configuration_AI_Thermocouple 2.Type = "K" |
|
122 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 109 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" |
|
123 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 110 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" |
|
124 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" |
|
125 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 112 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" |
|
126 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 113 | Configuration_AI_Thermocouple 3.Type = "K" |
|
127 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 114 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" |
|
128 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 115 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" |
|
129 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" |
|
130 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 117 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" |
|
131 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 118 | Configuration_AI_Thermocouple 4.Type = "K" |
|
132 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 119 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" |
|
133 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 120 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" |
|
134 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" |
|
135 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 122 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" |
|
136 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 123 | Configuration_AI_Thermocouple 5.Type = "K" |
|
137 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 124 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" |
|
138 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 125 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" |
|
139 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" |
|
140 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 127 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" |
|
141 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 128 | Configuration_AI_Thermocouple 6.Type = "K" |
|
142 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 129 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" |
|
143 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 130 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" |
|
144 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" |
|
145 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 132 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" |
|
146 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 133 | Configuration_AI_Thermocouple 7.Type = "K" |
|
147 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 134 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" |
|
148 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 135 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" |
|
149 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| 136 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" |
|
150 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" | |
| 137 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" |
|
151 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" | |
| 138 | Configuration_AI_Thermocouple 8.Type = "K" |
|
152 | Configuration_AI_Thermocouple 8.Type = "K" | |
| 139 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" |
|
153 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" | |
| 140 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" |
|
154 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" | |
| 141 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" |
|
155 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" | |
| 142 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" |
|
156 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" | |
| 143 | Configuration_AI_Thermocouple 9.Type = "K" |
|
157 | Configuration_AI_Thermocouple 9.Type = "K" | |
| 144 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" |
|
158 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" | |
| 145 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" |
|
159 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" | |
| 146 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" |
|
160 | Configuration_AI_Thermocouple 10.Maximum = "250,000000" | |
| 147 |
Configuration_AI_ |
|
161 | Configuration_AI_Thermocouple 10.Minimum = "-200,000000" | |
|
|
162 | Configuration_AI_Thermocouple 10.Type = "K" | |||
|
|
163 | Configuration_AI_Thermocouple 10.CJC_Source = "Built-In" | |||
|
|
164 | Configuration_AI_Thermocouple 10.CJC_Value = "25,000000" | |||
|
|
165 | Configuration_AI_Thermocouple 11.Maximum = "250,000000" | |||
|
|
166 | Configuration_AI_Thermocouple 11.Minimum = "-200,000000" | |||
|
|
167 | Configuration_AI_Thermocouple 11.Type = "K" | |||
|
|
168 | Configuration_AI_Thermocouple 11.CJC_Source = "Built-In" | |||
|
|
169 | Configuration_AI_Thermocouple 11.CJC_Value = "25,000000" | |||
|
|
170 | Configuration_AI_Thermocouple 12.Maximum = "250,000000" | |||
|
|
171 | Configuration_AI_Thermocouple 12.Minimum = "-200,000000" | |||
|
|
172 | Configuration_AI_Thermocouple 12.Type = "K" | |||
|
|
173 | Configuration_AI_Thermocouple 12.CJC_Source = "Built-In" | |||
|
|
174 | Configuration_AI_Thermocouple 12.CJC_Value = "25,000000" | |||
|
|
175 | Configuration_AI_Thermocouple 13.Maximum = "250,000000" | |||
|
|
176 | Configuration_AI_Thermocouple 13.Minimum = "-200,000000" | |||
|
|
177 | Configuration_AI_Thermocouple 13.Type = "K" | |||
|
|
178 | Configuration_AI_Thermocouple 13.CJC_Source = "Built-In" | |||
|
|
179 | Configuration_AI_Thermocouple 13.CJC_Value = "10,000000" | |||
|
|
180 | Configuration_AI_Thermocouple 14.Maximum = "250,000000" | |||
|
|
181 | Configuration_AI_Thermocouple 14.Minimum = "-200,000000" | |||
|
|
182 | Configuration_AI_Thermocouple 14.Type = "K" | |||
|
|
183 | Configuration_AI_Thermocouple 14.CJC_Source = "Built-In" | |||
|
|
184 | Configuration_AI_Thermocouple 14.CJC_Value = "25,000000" | |||
|
|
185 | Configuration_AI_NI9219_Resistance.<size(s)> = "11" | |||
|
|
186 | Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000" | |||
| 148 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" |
|
187 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| 149 |
Configuration_AI_NI9219_Resistance 0.Configuration = " |
|
188 | Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire" | |
| 150 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" |
|
189 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 151 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" |
|
190 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 152 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" |
|
191 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 153 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" |
|
192 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
193 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 155 |
Configuration_AI_NI9219_Resistance 1.Maximum = " |
|
194 | Configuration_AI_NI9219_Resistance 1.Maximum = "800,000000" | |
| 156 |
Configuration_AI_NI9219_Resistance 1.Minimum = " |
|
195 | Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000" | |
| 157 |
Configuration_AI_NI9219_Resistance 1.Configuration = " |
|
196 | Configuration_AI_NI9219_Resistance 1.Configuration = "4-Wire" | |
| 158 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" |
|
197 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 159 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" |
|
198 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 160 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" |
|
199 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 161 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" |
|
200 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
201 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 163 |
Configuration_AI_NI9219_Resistance 2.Maximum = " |
|
202 | Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000" | |
| 164 |
Configuration_AI_NI9219_Resistance 2.Minimum = " |
|
203 | Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000" | |
| 165 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" |
|
204 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 166 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" |
|
205 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 167 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" |
|
206 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 168 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" |
|
207 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 169 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" |
|
208 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" |
|
209 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" |
|
210 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| 172 |
Configuration_AI_NI9219_Resistance 3.Minimum = " |
|
211 | Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000" | |
| 173 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" |
|
212 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 174 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" |
|
213 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 175 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" |
|
214 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 176 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" |
|
215 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 177 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" |
|
216 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 178 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
217 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 179 |
Configuration_AI_NI9219_ |
|
218 | Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000" | |
| 180 | Configuration_AI_NI9219_Type 0 = "Thermocouple" |
|
219 | Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000" | |
| 181 |
Configuration_AI_NI9219_ |
|
220 | Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire" | |
| 182 | Configuration_AI_NI9219_Type 2 = "Resistance_Thermistor" |
|
221 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal" | |
| 183 | Configuration_AI_NI9219_Type 3 = "Thermocouple" |
|
222 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500" | |
|
|
223 | Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750" | |||
|
|
224 | Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000" | |||
|
|
225 | Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
226 | Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000" | |||
|
|
227 | Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000" | |||
|
|
228 | Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire" | |||
|
|
229 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal" | |||
|
|
230 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500" | |||
|
|
231 | Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750" | |||
|
|
232 | Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000" | |||
|
|
233 | Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
234 | Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000" | |||
|
|
235 | Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000" | |||
|
|
236 | Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire" | |||
|
|
237 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal" | |||
|
|
238 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500" | |||
|
|
239 | Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750" | |||
|
|
240 | Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000" | |||
|
|
241 | Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
242 | Configuration_AI_NI9219_Resistance 7.Maximum = "250,000000" | |||
|
|
243 | Configuration_AI_NI9219_Resistance 7.Minimum = "-200,000000" | |||
|
|
244 | Configuration_AI_NI9219_Resistance 7.Configuration = "4-Wire" | |||
|
|
245 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationSource = "Internal" | |||
|
|
246 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationValue = "0,000500" | |||
|
|
247 | Configuration_AI_NI9219_Resistance 7.RTD_Type = "Pt3750" | |||
|
|
248 | Configuration_AI_NI9219_Resistance 7.R0 = "1000,000000" | |||
|
|
249 | Configuration_AI_NI9219_Resistance 7.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
250 | Configuration_AI_NI9219_Resistance 8.Maximum = "200,000000" | |||
|
|
251 | Configuration_AI_NI9219_Resistance 8.Minimum = "-10,000000" | |||
|
|
252 | Configuration_AI_NI9219_Resistance 8.Configuration = "4-Wire" | |||
|
|
253 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationSource = "Internal" | |||
|
|
254 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationValue = "0,000500" | |||
|
|
255 | Configuration_AI_NI9219_Resistance 8.RTD_Type = "Pt3750" | |||
|
|
256 | Configuration_AI_NI9219_Resistance 8.R0 = "1000,000000" | |||
|
|
257 | Configuration_AI_NI9219_Resistance 8.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
258 | Configuration_AI_NI9219_Resistance 9.Maximum = "250,000000" | |||
|
|
259 | Configuration_AI_NI9219_Resistance 9.Minimum = "0,000000" | |||
|
|
260 | Configuration_AI_NI9219_Resistance 9.Configuration = "4-Wire" | |||
|
|
261 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationSource = "Internal" | |||
|
|
262 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationValue = "0,000500" | |||
|
|
263 | Configuration_AI_NI9219_Resistance 9.RTD_Type = "Pt3750" | |||
|
|
264 | Configuration_AI_NI9219_Resistance 9.R0 = "1000,000000" | |||
|
|
265 | Configuration_AI_NI9219_Resistance 9.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
266 | Configuration_AI_NI9219_Resistance 10.Maximum = "250,000000" | |||
|
|
267 | Configuration_AI_NI9219_Resistance 10.Minimum = "0,000000" | |||
|
|
268 | Configuration_AI_NI9219_Resistance 10.Configuration = "2-Wire" | |||
|
|
269 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationSource = "Internal" | |||
|
|
270 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationValue = "0,000500" | |||
|
|
271 | Configuration_AI_NI9219_Resistance 10.RTD_Type = "Pt3750" | |||
|
|
272 | Configuration_AI_NI9219_Resistance 10.R0 = "1000,000000" | |||
|
|
273 | Configuration_AI_NI9219_Resistance 10.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
274 | Configuration_AI_NI9219_Type.<size(s)> = "11" | |||
|
|
275 | Configuration_AI_NI9219_Type 0 = "RTD" | |||
|
|
276 | Configuration_AI_NI9219_Type 1 = "RTD" | |||
|
|
277 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" | |||
|
|
278 | Configuration_AI_NI9219_Type 3 = "Resistance_Thermistor" | |||
|
|
279 | Configuration_AI_NI9219_Type 4 = "Resistance_Thermistor" | |||
|
|
280 | Configuration_AI_NI9219_Type 5 = "Resistance_Thermistor" | |||
|
|
281 | Configuration_AI_NI9219_Type 6 = "Resistance_Thermistor" | |||
|
|
282 | Configuration_AI_NI9219_Type 7 = "RTD" | |||
|
|
283 | Configuration_AI_NI9219_Type 8 = "RTD" | |||
|
|
284 | Configuration_AI_NI9219_Type 9 = "RTD" | |||
|
|
285 | Configuration_AI_NI9219_Type 10 = "Resistance_RTD" | |||
| 184 | POS_Config.IP = "10.1.2.1" |
|
286 | POS_Config.IP = "10.1.2.1" | |
| 185 | POS_Config.Port = "502" |
|
287 | POS_Config.Port = "502" | |
| 186 | POS_AxesNames.<size(s)> = "3" |
|
288 | POS_AxesNames.<size(s)> = "3" | |
| 187 | POS_AxesNames 0 = "X" |
|
289 | POS_AxesNames 0 = "X" | |
| 188 | POS_AxesNames 1 = "Y" |
|
290 | POS_AxesNames 1 = "Y" | |
| 189 | POS_AxesNames 2 = "Z" |
|
291 | POS_AxesNames 2 = "Z" | |
| 190 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" |
|
292 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" | |
| 191 | POS_Limits_Axis1 = "<size(s)=2> 0 210" |
|
293 | POS_Limits_Axis1 = "<size(s)=2> 0 210" | |
| 192 | POS_Limits_Axis2 = "<size(s)=2> 0 242" |
|
294 | POS_Limits_Axis2 = "<size(s)=2> 0 242" | |
| 193 | POS_Limits_Axis3 = "<size(s)=2> 0 111" |
|
295 | POS_Limits_Axis3 = "<size(s)=2> 0 111" | |
| 194 | POS_AxesFlipped.<size(s)> = "3" |
|
296 | POS_AxesFlipped.<size(s)> = "3" | |
| 195 | POS_AxesFlipped 0 = "True" |
|
297 | POS_AxesFlipped 0 = "True" | |
| 196 | POS_AxesFlipped 1 = "True" |
|
298 | POS_AxesFlipped 1 = "True" | |
| 197 | POS_AxesFlipped 2 = "False" |
|
299 | POS_AxesFlipped 2 = "False" | |
| 198 | Pos_MaxVelocity = "300" |
|
300 | Pos_MaxVelocity = "300" | |
| 199 | Pos_MaxAcceleration = "15000" |
|
301 | Pos_MaxAcceleration = "15000" | |
| 200 | Pos_MaxJerk = "140000" |
|
302 | Pos_MaxJerk = "140000" | |
| 201 | Pos_DO_E-Stop_Index = "0" |
|
303 | Pos_DO_E-Stop_Index = "0" | |
| 202 | Pos_DO_Setup_Index = "1" |
|
304 | Pos_DO_Setup_Index = "1" | |
| 203 |
|
305 | |||
| 204 | [DefaultValues] |
|
306 | [DefaultValues] | |
| 205 | WorkingStroke = "0" |
|
307 | WorkingStroke = "0" | |
| 206 |
MaxTemperature = "<size(s)=1 |
|
308 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" | |
| 207 | MeasurementTime = "1" |
|
309 | MeasurementTime = "1" | |
| 208 | NominalCurrent = "0" |
|
310 | NominalCurrent = "0" | |
| 209 | TableControl = False |
|
311 | TableControl = False | |
| 210 |
SensorsColor = "<size(s)=1 |
|
312 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | |
| 211 |
Sensors+.<size(s)> = "1 |
|
313 | Sensors+.<size(s)> = "15" | |
| 212 | Sensors+ 0 = "True" |
|
314 | Sensors+ 0 = "True" | |
| 213 | Sensors+ 1 = "True" |
|
315 | Sensors+ 1 = "True" | |
| 214 | Sensors+ 2 = "True" |
|
316 | Sensors+ 2 = "True" | |
| 215 | Sensors+ 3 = "True" |
|
317 | Sensors+ 3 = "True" | |
| 216 | Sensors+ 4 = "False" |
|
318 | Sensors+ 4 = "False" | |
| 217 | Sensors+ 5 = "False" |
|
319 | Sensors+ 5 = "False" | |
| 218 | Sensors+ 6 = "False" |
|
320 | Sensors+ 6 = "False" | |
| 219 | Sensors+ 7 = "False" |
|
321 | Sensors+ 7 = "False" | |
| 220 | Sensors+ 8 = "False" |
|
322 | Sensors+ 8 = "False" | |
| 221 | Sensors+ 9 = "False" |
|
323 | Sensors+ 9 = "False" | |
| 222 | SensorsFunction.<size(s)> = "10" |
|
324 | Sensors+ 10 = "False" | |
|
|
325 | Sensors+ 11 = "False" | |||
|
|
326 | Sensors+ 12 = "False" | |||
|
|
327 | Sensors+ 13 = "False" | |||
|
|
328 | Sensors+ 14 = "False" | |||
|
|
329 | SensorsFunction.<size(s)> = "15" | |||
| 223 | SensorsFunction 0 = "Umgebungstemperatur" |
|
330 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 224 | SensorsFunction 1 = "Pr�flingstemperatur" |
|
331 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 225 | SensorsFunction 2 = "Temperatur 3" |
|
332 | SensorsFunction 2 = "Temperatur 3" | |
| 226 | SensorsFunction 3 = "Temperatur 4" |
|
333 | SensorsFunction 3 = "Temperatur 4" | |
| 227 | SensorsFunction 4 = "Temperatur 5" |
|
334 | SensorsFunction 4 = "Temperatur 5" | |
| 228 | SensorsFunction 5 = "Temperatur 6" |
|
335 | SensorsFunction 5 = "Temperatur 6" | |
| 229 | SensorsFunction 6 = "Temperatur 7" |
|
336 | SensorsFunction 6 = "Temperatur 7" | |
| 230 | SensorsFunction 7 = "Temperatur 8" |
|
337 | SensorsFunction 7 = "Temperatur 8" | |
| 231 | SensorsFunction 8 = "Temperatur 9" |
|
338 | SensorsFunction 8 = "Temperatur 9" | |
| 232 | SensorsFunction 9 = "Temperatur 10" |
|
339 | SensorsFunction 9 = "Temperatur 10" | |
|
|
340 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
341 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
342 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
343 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
344 | SensorsFunction 14 = "Temperatur 15" | |||
| 233 | MovingParameter.Velocity = "20,000000" |
|
345 | MovingParameter.Velocity = "20,000000" | |
| 234 | MovingParameter.Acceleration = "50,000000" |
|
346 | MovingParameter.Acceleration = "50,000000" | |
| 235 | MovingParameter.Jerk = "140000,000000" |
|
347 | MovingParameter.Jerk = "140000,000000" | |
| 236 | Learning_Steps.X = "1,000000" |
|
348 | Learning_Steps.X = "1,000000" | |
| 237 | Learning_Steps.Y = "1,000000" |
|
349 | Learning_Steps.Y = "1,000000" | |
| 238 | Learning_Steps.Z = "1,000000" |
|
350 | Learning_Steps.Z = "1,000000" | |
| 239 |
|
351 | |||
| 240 | [Pathes] |
|
352 | [Pathes] | |
| 241 | User = "C:\Work\CurrentTester\support\User.txt" |
|
353 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 242 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" |
|
354 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" | |
| 243 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" |
|
355 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" | |
| 244 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" |
|
356 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 245 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" |
|
357 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 246 |
|
358 | |||
| 247 | [Report] |
|
359 | [Report] | |
| 248 | FileNameFormat = "%s_TestResults.txt" |
|
360 | FileNameFormat = "%s_TestResults.txt" | |
| 249 | ReportNameFormat = "%s_TestReport_%s.xlsx" |
|
361 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 250 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" |
|
362 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 251 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" |
|
363 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 252 |
|
364 | |||
| 253 | [Protocol] |
|
365 | [Protocol] | |
| 254 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" |
|
366 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 255 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" |
|
367 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 256 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" |
|
368 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 257 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" |
|
369 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 258 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" |
|
370 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 259 | ProtocolDataFolderName = "Bilder|Messungen" |
|
371 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 260 |
|
372 | |||
| 261 | [StateMessages] |
|
373 | [StateMessages] | |
| 262 | Info.<size(s)> = "28" |
|
374 | Info.<size(s)> = "28" | |
| 263 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" |
|
375 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 264 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
376 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 265 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" |
|
377 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 266 | Info 3 = "Testdaten anlegen" |
|
378 | Info 3 = "Testdaten anlegen" | |
| 267 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" |
|
379 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 268 | Info 5 = "Test geladen" |
|
380 | Info 5 = "Test geladen" | |
| 269 | Info 6 = "Laufende Pr�fung..." |
|
381 | Info 6 = "Laufende Pr�fung..." | |
| 270 | Info 7 = "Pr�fung erfolgreich abgeschlossen" |
|
382 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 271 | Info 8 = "Fehler aufgetreten!" |
|
383 | Info 8 = "Fehler aufgetreten!" | |
| 272 | Info 9 = "Test abgebrochen!" |
|
384 | Info 9 = "Test abgebrochen!" | |
| 273 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" |
|
385 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 274 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" |
|
386 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 275 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" |
|
387 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 276 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" |
|
388 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 277 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" |
|
389 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 278 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" |
|
390 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 279 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" |
|
391 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 280 | Info 17 = "Testprotokoll erstellt" |
|
392 | Info 17 = "Testprotokoll erstellt" | |
| 281 | Info 18 = "Der letzte Test ist geladen..." |
|
393 | Info 18 = "Der letzte Test ist geladen..." | |
| 282 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" |
|
394 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 283 | Info 20 = "Testbericht wird erstellt... Bitte warten" |
|
395 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 284 | Info 21 = "Testbericht erstellt" |
|
396 | Info 21 = "Testbericht erstellt" | |
| 285 | Info 22 = "Achsen werden initialisiert..." |
|
397 | Info 22 = "Achsen werden initialisiert..." | |
| 286 | Info 23 = "Referenzfahrt l�uft..." |
|
398 | Info 23 = "Referenzfahrt l�uft..." | |
| 287 | Info 24 = "X-Achse wird referenziert..." |
|
399 | Info 24 = "X-Achse wird referenziert..." | |
| 288 | Info 25 = "Y-Achse wird referenziert..." |
|
400 | Info 25 = "Y-Achse wird referenziert..." | |
| 289 | Info 26 = "Z-Achse wird referenziert..." |
|
401 | Info 26 = "Z-Achse wird referenziert..." | |
| 290 | Info 27 = "Position wird angefahren..." |
|
402 | Info 27 = "Position wird angefahren..." | |
| 291 | Result.<size(s)> = "28" |
|
403 | Result.<size(s)> = "28" | |
| 292 | Result 0 = "Not-Halt" |
|
404 | Result 0 = "Not-Halt" | |
| 293 | Result 1 = "" |
|
405 | Result 1 = "" | |
| 294 | Result 2 = "Bereit" |
|
406 | Result 2 = "Bereit" | |
| 295 | Result 3 = "Bereit" |
|
407 | Result 3 = "Bereit" | |
| 296 | Result 4 = "Einrichtbetrieb" |
|
408 | Result 4 = "Einrichtbetrieb" | |
| 297 | Result 5 = "Bereit" |
|
409 | Result 5 = "Bereit" | |
| 298 | Result 6 = "Pr�fung l�uft" |
|
410 | Result 6 = "Pr�fung l�uft" | |
| 299 | Result 7 = "Pr�fung fertig" |
|
411 | Result 7 = "Pr�fung fertig" | |
| 300 | Result 8 = "Fehler" |
|
412 | Result 8 = "Fehler" | |
| 301 | Result 9 = "Pr�fung Stop" |
|
413 | Result 9 = "Pr�fung Stop" | |
| 302 | Result 10 = "Pr�fung Stop" |
|
414 | Result 10 = "Pr�fung Stop" | |
| 303 | Result 11 = "Pr�fung Stop" |
|
415 | Result 11 = "Pr�fung Stop" | |
| 304 | Result 12 = "Pr�fung Stop" |
|
416 | Result 12 = "Pr�fung Stop" | |
| 305 | Result 13 = "Pr�fung Stop" |
|
417 | Result 13 = "Pr�fung Stop" | |
| 306 | Result 14 = "Pr�fung Stop" |
|
418 | Result 14 = "Pr�fung Stop" | |
| 307 | Result 15 = "Pr�fung Stop" |
|
419 | Result 15 = "Pr�fung Stop" | |
| 308 | Result 16 = "Bereit" |
|
420 | Result 16 = "Bereit" | |
| 309 | Result 17 = "Bereit" |
|
421 | Result 17 = "Bereit" | |
| 310 | Result 18 = "Bereit" |
|
422 | Result 18 = "Bereit" | |
| 311 | Result 19 = "Bereit" |
|
423 | Result 19 = "Bereit" | |
| 312 | Result 20 = "Bereit" |
|
424 | Result 20 = "Bereit" | |
| 313 | Result 21 = "Bereit" |
|
425 | Result 21 = "Bereit" | |
| 314 | Result 22 = "" |
|
426 | Result 22 = "" | |
| 315 | Result 23 = "Einrichtbetrieb" |
|
427 | Result 23 = "Einrichtbetrieb" | |
| 316 | Result 24 = "Einrichtbetrieb" |
|
428 | Result 24 = "Einrichtbetrieb" | |
| 317 | Result 25 = "Einrichtbetrieb" |
|
429 | Result 25 = "Einrichtbetrieb" | |
| 318 | Result 26 = "Einrichtbetrieb" |
|
430 | Result 26 = "Einrichtbetrieb" | |
| 319 | Result 27 = "Einrichtbetrieb" |
|
431 | Result 27 = "Einrichtbetrieb" | |
| 320 |
|
432 | |||
| 321 | [DialogMessages] |
|
433 | [DialogMessages] | |
| 322 | Messages.<size(s)> = "7" |
|
434 | Messages.<size(s)> = "7" | |
| 323 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" |
|
435 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 324 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
436 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 325 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
437 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 326 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" |
|
438 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 327 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
439 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 328 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
440 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 329 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
441 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,227 +1,257 | |||||
| 1 | [Tester] |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP1" |
|
2 | TesterType = "HSMP1" | |
| 3 | TesterName = "Hochstrommessplatz 1" |
|
3 | TesterName = "Hochstrommessplatz 1" | |
| 4 | MaxCurrent = 600 |
|
4 | MaxCurrent = 600 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| 6 |
SensorsEnable.<size(s)> = "1 |
|
6 | SensorsEnable.<size(s)> = "15" | |
| 7 | SensorsEnable 0 = "True" |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "False" |
|
12 | SensorsEnable 5 = "False" | |
| 13 | SensorsEnable 6 = "False" |
|
13 | SensorsEnable 6 = "False" | |
| 14 | SensorsEnable 7 = "False" |
|
14 | SensorsEnable 7 = "False" | |
| 15 | SensorsEnable 8 = "False" |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| 17 | SensorsDescription.<size(s)> = "10" |
|
17 | SensorsEnable 10 = "False" | |
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
22 | SensorsDescription.<size(s)> = "15" | |||
| 18 | SensorsDescription 0 = "Keithley: Ch6" |
|
23 | SensorsDescription 0 = "Keithley: Ch6" | |
| 19 | SensorsDescription 1 = "Keithley: Ch7" |
|
24 | SensorsDescription 1 = "Keithley: Ch7" | |
| 20 | SensorsDescription 2 = "Keithley: Ch8" |
|
25 | SensorsDescription 2 = "Keithley: Ch8" | |
| 21 | SensorsDescription 3 = "Keithley: Ch9" |
|
26 | SensorsDescription 3 = "Keithley: Ch9" | |
| 22 | SensorsDescription 4 = "Keithley: Ch10" |
|
27 | SensorsDescription 4 = "Keithley: Ch10" | |
| 23 | SensorsDescription 5 = "" |
|
28 | SensorsDescription 5 = "" | |
| 24 | SensorsDescription 6 = "" |
|
29 | SensorsDescription 6 = "" | |
| 25 | SensorsDescription 7 = "" |
|
30 | SensorsDescription 7 = "" | |
| 26 | SensorsDescription 8 = "" |
|
31 | SensorsDescription 8 = "" | |
| 27 | SensorsDescription 9 = "" |
|
32 | SensorsDescription 9 = "" | |
|
|
33 | SensorsDescription 10 = "" | |||
|
|
34 | SensorsDescription 11 = "" | |||
|
|
35 | SensorsDescription 12 = "" | |||
|
|
36 | SensorsDescription 13 = "" | |||
|
|
37 | SensorsDescription 14 = "" | |||
| 28 | VoltageDescription.<size(s)> = "4 2" |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "Keithley: Ch2" |
|
39 | VoltageDescription 0 = "Keithley: Ch2" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "Keithley: Ch4" |
|
41 | VoltageDescription 2 = "Keithley: Ch4" | |
| 32 | VoltageDescription 3 = "Shunt- Spannung [V]" |
|
42 | VoltageDescription 3 = "Shunt- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 |
|
48 | |||
| 39 | [Hardware] |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "Dev1/port1/line0" |
|
51 | DI_E-Stop = "Dev1/port1/line0" | |
| 42 | DI_Setup = "" |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM2" |
|
53 | PowerSupply_VISAName = "COM2" | |
| 44 | PowerSupply_Address = "6" |
|
54 | PowerSupply_Address = "6" | |
| 45 | PowerSupply_Baudrate = "9600" |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "8,000000" |
|
56 | PowerSupply_OutputVoltage = "8,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,000000" |
|
57 | PowerSupply_OverVoltageProtection = "9,000000" | |
| 48 | PowerSupply_MinCurrent = "1" |
|
58 | PowerSupply_MinCurrent = "1" | |
| 49 | PowerSupply_Check = False |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "4700,000000" |
|
60 | PowerSupply_WarningPower = "4700,000000" | |
| 51 | PowerSupply_AbortPower = "4750,000000" |
|
61 | PowerSupply_AbortPower = "4750,000000" | |
| 52 | PowerSupply_PID = "False" |
|
62 | PowerSupply_PID = "False" | |
| 53 | PowerSupply_PID_Time = "0,100000" |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0" |
|
67 | AbortCurrentDifference = "0" | |
| 58 |
Measurement_Channels.<size(s)> = "1 |
|
68 | Measurement_Channels.<size(s)> = "17" | |
| 59 | Measurement_Channels 0 = "112" |
|
69 | Measurement_Channels 0 = "112" | |
| 60 | Measurement_Channels 1 = "102" |
|
70 | Measurement_Channels 1 = "102" | |
| 61 | Measurement_Channels 2 = "104" |
|
71 | Measurement_Channels 2 = "104" | |
| 62 | Measurement_Channels 3 = "106" |
|
72 | Measurement_Channels 3 = "106" | |
| 63 | Measurement_Channels 4 = "107" |
|
73 | Measurement_Channels 4 = "107" | |
| 64 | Measurement_Channels 5 = "108" |
|
74 | Measurement_Channels 5 = "108" | |
| 65 | Measurement_Channels 6 = "109" |
|
75 | Measurement_Channels 6 = "109" | |
| 66 | Measurement_Channels 7 = "110" |
|
76 | Measurement_Channels 7 = "110" | |
| 67 | Measurement_Channels 8 = "" |
|
77 | Measurement_Channels 8 = "" | |
| 68 | Measurement_Channels 9 = "" |
|
78 | Measurement_Channels 9 = "" | |
| 69 | Measurement_Channels 10 = "" |
|
79 | Measurement_Channels 10 = "" | |
| 70 | Measurement_Channels 11 = "" |
|
80 | Measurement_Channels 11 = "" | |
| 71 | Measurement_Channels 12 = "" |
|
81 | Measurement_Channels 12 = "" | |
|
|
82 | Measurement_Channels 13 = "" | |||
|
|
83 | Measurement_Channels 14 = "" | |||
|
|
84 | Measurement_Channels 15 = "" | |||
|
|
85 | Measurement_Channels 16 = "" | |||
| 72 | ShuntResistance = 0,00006 |
|
86 | ShuntResistance = 0,00006 | |
| 73 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| 74 | DMM_VISAName = "COM1" |
|
88 | DMM_VISAName = "COM1" | |
| 75 | DMM_ContactLimits = "<size(s)=2> 0,0 10,0" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,0 10,0" | |
| 76 |
TemperatureGain = "<size(s)=1 |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 77 |
TemperatureOffset = "<size(s)=1 |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" | |
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" |
|
94 | AllowedContactFails = "2" | |
| 81 |
|
95 | |||
| 82 | [HSMP1] |
|
96 | [HSMP1] | |
| 83 | DMM_Baudrate = "9600" |
|
97 | DMM_Baudrate = "9600" | |
| 84 | Measurement_Channels_AutoRange.<size(s)> = "13" |
|
98 | Measurement_Channels_AutoRange.<size(s)> = "13" | |
| 85 | Measurement_Channels_AutoRange 0 = "FALSE" |
|
99 | Measurement_Channels_AutoRange 0 = "FALSE" | |
| 86 | Measurement_Channels_AutoRange 1 = "TRUE" |
|
100 | Measurement_Channels_AutoRange 1 = "TRUE" | |
| 87 | Measurement_Channels_AutoRange 2 = "TRUE" |
|
101 | Measurement_Channels_AutoRange 2 = "TRUE" | |
| 88 | Measurement_Channels_AutoRange 3 = "TRUE" |
|
102 | Measurement_Channels_AutoRange 3 = "TRUE" | |
| 89 | Measurement_Channels_AutoRange 4 = "TRUE" |
|
103 | Measurement_Channels_AutoRange 4 = "TRUE" | |
| 90 | Measurement_Channels_AutoRange 5 = "TRUE" |
|
104 | Measurement_Channels_AutoRange 5 = "TRUE" | |
| 91 | Measurement_Channels_AutoRange 6 = "TRUE" |
|
105 | Measurement_Channels_AutoRange 6 = "TRUE" | |
| 92 | Measurement_Channels_AutoRange 7 = "TRUE" |
|
106 | Measurement_Channels_AutoRange 7 = "TRUE" | |
| 93 | Measurement_Channels_AutoRange 8 = "TRUE" |
|
107 | Measurement_Channels_AutoRange 8 = "TRUE" | |
| 94 | Measurement_Channels_AutoRange 9 = "TRUE" |
|
108 | Measurement_Channels_AutoRange 9 = "TRUE" | |
| 95 | Measurement_Channels_AutoRange 10 = "TRUE" |
|
109 | Measurement_Channels_AutoRange 10 = "TRUE" | |
| 96 | Measurement_Channels_AutoRange 11 = "TRUE" |
|
110 | Measurement_Channels_AutoRange 11 = "TRUE" | |
| 97 | Measurement_Channels_AutoRange 12 = "TRUE" |
|
111 | Measurement_Channels_AutoRange 12 = "TRUE" | |
| 98 | Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" |
|
112 | Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 99 | Measurement_Channels_Resolution.<size(s)> = "13" |
|
113 | Measurement_Channels_Resolution.<size(s)> = "13" | |
| 100 | Measurement_Channels_Resolution 0 = "6.5" |
|
114 | Measurement_Channels_Resolution 0 = "6.5" | |
| 101 | Measurement_Channels_Resolution 1 = "6.5" |
|
115 | Measurement_Channels_Resolution 1 = "6.5" | |
| 102 | Measurement_Channels_Resolution 2 = "6.5" |
|
116 | Measurement_Channels_Resolution 2 = "6.5" | |
| 103 | Measurement_Channels_Resolution 3 = "6.5" |
|
117 | Measurement_Channels_Resolution 3 = "6.5" | |
| 104 | Measurement_Channels_Resolution 4 = "6.5" |
|
118 | Measurement_Channels_Resolution 4 = "6.5" | |
| 105 | Measurement_Channels_Resolution 5 = "6.5" |
|
119 | Measurement_Channels_Resolution 5 = "6.5" | |
| 106 | Measurement_Channels_Resolution 6 = "6.5" |
|
120 | Measurement_Channels_Resolution 6 = "6.5" | |
| 107 | Measurement_Channels_Resolution 7 = "6.5" |
|
121 | Measurement_Channels_Resolution 7 = "6.5" | |
| 108 | Measurement_Channels_Resolution 8 = "6.5" |
|
122 | Measurement_Channels_Resolution 8 = "6.5" | |
| 109 | Measurement_Channels_Resolution 9 = "6.5" |
|
123 | Measurement_Channels_Resolution 9 = "6.5" | |
| 110 | Measurement_Channels_Resolution 10 = "6.5" |
|
124 | Measurement_Channels_Resolution 10 = "6.5" | |
| 111 | Measurement_Channels_Resolution 11 = "6.5" |
|
125 | Measurement_Channels_Resolution 11 = "6.5" | |
| 112 | Measurement_Channels_Resolution 12 = "6.5" |
|
126 | Measurement_Channels_Resolution 12 = "6.5" | |
| 113 | Resistance_Function = "Resistance" |
|
127 | Resistance_Function = "Resistance" | |
| 114 | Resistance_OffsetCompensation = "FALSE" |
|
128 | Resistance_OffsetCompensation = "FALSE" | |
| 115 | TableControl_Out_LiftTable = "Dev1/port0/line5" |
|
129 | TableControl_Out_LiftTable = "Dev1/port0/line5" | |
| 116 | TableControl_Out_SettingMode.<size(s)> = "2" |
|
130 | TableControl_Out_SettingMode.<size(s)> = "2" | |
| 117 | TableControl_Out_SettingMode 0 = "Dev1/port0/line0" |
|
131 | TableControl_Out_SettingMode 0 = "Dev1/port0/line0" | |
| 118 | TableControl_Out_SettingMode 1 = "Dev1/port0/line1" |
|
132 | TableControl_Out_SettingMode 1 = "Dev1/port0/line1" | |
| 119 |
|
133 | |||
| 120 | [DefaultValues] |
|
134 | [DefaultValues] | |
| 121 | WorkingStroke = "0" |
|
135 | WorkingStroke = "0" | |
| 122 |
MaxTemperature = "<size(s)=1 |
|
136 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" | |
| 123 | MeasurementTime = "1" |
|
137 | MeasurementTime = "1" | |
| 124 | NominalCurrent = "0" |
|
138 | NominalCurrent = "0" | |
| 125 | TableControl = False |
|
139 | TableControl = False | |
| 126 |
SensorsColor = "<size(s)=1 |
|
140 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | |
| 127 |
Sensors+.<size(s)> = "1 |
|
141 | Sensors+.<size(s)> = "15" | |
| 128 | Sensors+ 0 = "True" |
|
142 | Sensors+ 0 = "True" | |
| 129 | Sensors+ 1 = "True" |
|
143 | Sensors+ 1 = "True" | |
| 130 | Sensors+ 2 = "True" |
|
144 | Sensors+ 2 = "True" | |
| 131 | Sensors+ 3 = "True" |
|
145 | Sensors+ 3 = "True" | |
| 132 |
Sensors+ 4 = " |
|
146 | Sensors+ 4 = "False" | |
| 133 | Sensors+ 5 = "False" |
|
147 | Sensors+ 5 = "False" | |
| 134 | Sensors+ 6 = "False" |
|
148 | Sensors+ 6 = "False" | |
| 135 | Sensors+ 7 = "False" |
|
149 | Sensors+ 7 = "False" | |
| 136 | Sensors+ 8 = "False" |
|
150 | Sensors+ 8 = "False" | |
| 137 | Sensors+ 9 = "False" |
|
151 | Sensors+ 9 = "False" | |
| 138 | SensorsFunction.<size(s)> = "10" |
|
152 | Sensors+ 10 = "False" | |
|
|
153 | Sensors+ 11 = "False" | |||
|
|
154 | Sensors+ 12 = "False" | |||
|
|
155 | Sensors+ 13 = "False" | |||
|
|
156 | Sensors+ 14 = "False" | |||
|
|
157 | SensorsFunction.<size(s)> = "15" | |||
| 139 | SensorsFunction 0 = "Umgebungstemperatur" |
|
158 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 140 | SensorsFunction 1 = "Pr�flingstemperatur" |
|
159 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 141 | SensorsFunction 2 = "Temperatur 3" |
|
160 | SensorsFunction 2 = "Temperatur 3" | |
| 142 | SensorsFunction 3 = "Temperatur 4" |
|
161 | SensorsFunction 3 = "Temperatur 4" | |
| 143 | SensorsFunction 4 = "Temperatur 5" |
|
162 | SensorsFunction 4 = "Temperatur 5" | |
| 144 | SensorsFunction 5 = "Temperatur 6" |
|
163 | SensorsFunction 5 = "Temperatur 6" | |
| 145 | SensorsFunction 6 = "Temperatur 7" |
|
164 | SensorsFunction 6 = "Temperatur 7" | |
| 146 | SensorsFunction 7 = "Temperatur 8" |
|
165 | SensorsFunction 7 = "Temperatur 8" | |
| 147 | SensorsFunction 8 = "Temperatur 9" |
|
166 | SensorsFunction 8 = "Temperatur 9" | |
| 148 | SensorsFunction 9 = "Temperatur 10" |
|
167 | SensorsFunction 9 = "Temperatur 10" | |
|
|
168 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
169 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
170 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
171 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
172 | SensorsFunction 14 = "Temperatur 15" | |||
|
|
173 | MovingParameter.Velocity = "20,000000" | |||
|
|
174 | MovingParameter.Acceleration = "50,000000" | |||
|
|
175 | MovingParameter.Jerk = "140000,000000" | |||
|
|
176 | Learning_Steps.X = "1,000000" | |||
|
|
177 | Learning_Steps.Y = "1,000000" | |||
|
|
178 | Learning_Steps.Z = "1,000000" | |||
| 149 |
|
179 | |||
| 150 | [Pathes] |
|
180 | [Pathes] | |
| 151 | User = "C:\Work\CurrentTester\support\User.txt" |
|
181 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 152 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1" |
|
182 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1" | |
| 153 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols" |
|
183 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols" | |
| 154 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" |
|
184 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 155 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" |
|
185 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 156 |
|
186 | |||
| 157 | [Report] |
|
187 | [Report] | |
| 158 | FileNameFormat = "%s_TestResults.txt" |
|
188 | FileNameFormat = "%s_TestResults.txt" | |
| 159 | ReportNameFormat = "%s_TestReport_%s.xlsx" |
|
189 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 160 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" |
|
190 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 161 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" |
|
191 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 162 |
|
192 | |||
| 163 | [Protocol] |
|
193 | [Protocol] | |
| 164 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" |
|
194 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 165 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" |
|
195 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 166 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" |
|
196 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 167 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" |
|
197 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 168 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" |
|
198 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 169 | ProtocolDataFolderName = "Bilder|Messungen" |
|
199 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 170 |
|
200 | |||
| 171 | [StateMessages] |
|
201 | [StateMessages] | |
| 172 | Info.<size(s)> = "22" |
|
202 | Info.<size(s)> = "22" | |
| 173 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" |
|
203 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 174 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
204 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 175 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" |
|
205 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 176 | Info 3 = "Testdaten anlegen" |
|
206 | Info 3 = "Testdaten anlegen" | |
| 177 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" |
|
207 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 178 | Info 5 = "Test geladen" |
|
208 | Info 5 = "Test geladen" | |
| 179 | Info 6 = "Laufende Pr�fung..." |
|
209 | Info 6 = "Laufende Pr�fung..." | |
| 180 | Info 7 = "Pr�fung erfolgreich abgeschlossen" |
|
210 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 181 | Info 8 = "Fehler aufgetreten!" |
|
211 | Info 8 = "Fehler aufgetreten!" | |
| 182 | Info 9 = "Test abgebrochen!" |
|
212 | Info 9 = "Test abgebrochen!" | |
| 183 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" |
|
213 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 184 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" |
|
214 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 185 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" |
|
215 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 186 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" |
|
216 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 187 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" |
|
217 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 188 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" |
|
218 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 189 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" |
|
219 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 190 | Info 17 = "Testprotokoll erstellt" |
|
220 | Info 17 = "Testprotokoll erstellt" | |
| 191 | Info 18 = "Der letzte Test ist geladen..." |
|
221 | Info 18 = "Der letzte Test ist geladen..." | |
| 192 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" |
|
222 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 193 | Info 20 = "Testbericht wird erstellt... Bitte warten" |
|
223 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 194 | Info 21 = "Testbericht erstellt" |
|
224 | Info 21 = "Testbericht erstellt" | |
| 195 | Result.<size(s)> = "22" |
|
225 | Result.<size(s)> = "22" | |
| 196 | Result 0 = "Not-Halt" |
|
226 | Result 0 = "Not-Halt" | |
| 197 | Result 1 = "" |
|
227 | Result 1 = "" | |
| 198 | Result 2 = "Bereit" |
|
228 | Result 2 = "Bereit" | |
| 199 | Result 3 = "Bereit" |
|
229 | Result 3 = "Bereit" | |
| 200 | Result 4 = "Einrichtbetrieb" |
|
230 | Result 4 = "Einrichtbetrieb" | |
| 201 | Result 5 = "Bereit" |
|
231 | Result 5 = "Bereit" | |
| 202 | Result 6 = "Pr�fung l�uft" |
|
232 | Result 6 = "Pr�fung l�uft" | |
| 203 | Result 7 = "Pr�fung fertig" |
|
233 | Result 7 = "Pr�fung fertig" | |
| 204 | Result 8 = "Fehler" |
|
234 | Result 8 = "Fehler" | |
| 205 | Result 9 = "Pr�fung Stop" |
|
235 | Result 9 = "Pr�fung Stop" | |
| 206 | Result 10 = "Pr�fung Stop" |
|
236 | Result 10 = "Pr�fung Stop" | |
| 207 | Result 11 = "Pr�fung Stop" |
|
237 | Result 11 = "Pr�fung Stop" | |
| 208 | Result 12 = "Pr�fung Stop" |
|
238 | Result 12 = "Pr�fung Stop" | |
| 209 | Result 13 = "Pr�fung Stop" |
|
239 | Result 13 = "Pr�fung Stop" | |
| 210 | Result 14 = "Pr�fung Stop" |
|
240 | Result 14 = "Pr�fung Stop" | |
| 211 | Result 15 = "Pr�fung Stop" |
|
241 | Result 15 = "Pr�fung Stop" | |
| 212 | Result 16 = "Bereit" |
|
242 | Result 16 = "Bereit" | |
| 213 | Result 17 = "Bereit" |
|
243 | Result 17 = "Bereit" | |
| 214 | Result 18 = "Bereit" |
|
244 | Result 18 = "Bereit" | |
| 215 | Result 19 = "Bereit" |
|
245 | Result 19 = "Bereit" | |
| 216 | Result 20 = "Bereit" |
|
246 | Result 20 = "Bereit" | |
| 217 | Result 21 = "Bereit" |
|
247 | Result 21 = "Bereit" | |
| 218 |
|
248 | |||
| 219 | [DialogMessages] |
|
249 | [DialogMessages] | |
| 220 | Messages.<size(s)> = "7" |
|
250 | Messages.<size(s)> = "7" | |
| 221 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" |
|
251 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 222 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
252 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 223 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
253 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 224 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" |
|
254 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 225 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
255 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 226 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
256 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 227 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
257 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,329 +1,441 | |||||
| 1 | [Tester] |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP2" |
|
2 | TesterType = "HSMP2" | |
| 3 | TesterName = "Hochstrommessplatz 2" |
|
3 | TesterName = "Hochstrommessplatz 2" | |
| 4 | MaxCurrent = 2000 |
|
4 | MaxCurrent = 2000 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| 6 |
SensorsEnable.<size(s)> = "1 |
|
6 | SensorsEnable.<size(s)> = "15" | |
| 7 | SensorsEnable 0 = "True" |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" |
|
13 | SensorsEnable 6 = "True" | |
| 14 |
SensorsEnable 7 = " |
|
14 | SensorsEnable 7 = "True" | |
| 15 |
SensorsEnable 8 = " |
|
15 | SensorsEnable 8 = "True" | |
| 16 |
SensorsEnable 9 = " |
|
16 | SensorsEnable 9 = "True" | |
| 17 | SensorsDescription.<size(s)> = "10" |
|
17 | SensorsEnable 10 = "True" | |
|
|
18 | SensorsEnable 11 = "True" | |||
|
|
19 | SensorsEnable 12 = "True" | |||
|
|
20 | SensorsEnable 13 = "True" | |||
|
|
21 | SensorsEnable 14 = "True" | |||
|
|
22 | SensorsDescription.<size(s)> = "15" | |||
| 18 | SensorsDescription 0 = "NI-9212: Ch1" |
|
23 | SensorsDescription 0 = "NI-9212: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9212: Ch2" |
|
24 | SensorsDescription 1 = "NI-9212: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9212: Ch3" |
|
25 | SensorsDescription 2 = "NI-9212: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9212: Ch4" |
|
26 | SensorsDescription 3 = "NI-9212: Ch4" | |
| 22 | SensorsDescription 4 = "NI-9219: Ch1" |
|
27 | SensorsDescription 4 = "NI-9219_1: Ch1" | |
| 23 | SensorsDescription 5 = "NI-9219: Ch2" |
|
28 | SensorsDescription 5 = "NI-9219_1: Ch2" | |
| 24 | SensorsDescription 6 = "NI-9219: Ch3" |
|
29 | SensorsDescription 6 = "NI-9219_1: Ch3" | |
| 25 | SensorsDescription 7 = "" |
|
30 | SensorsDescription 7 = "NI-9219_2: Ch1" | |
| 26 | SensorsDescription 8 = "" |
|
31 | SensorsDescription 8 = "NI-9219_2: Ch2" | |
| 27 | SensorsDescription 9 = "" |
|
32 | SensorsDescription 9 = "NI-9219_2: Ch3" | |
|
|
33 | SensorsDescription 10 = "NI-9219_2: Ch4" | |||
|
|
34 | SensorsDescription 11 = "NI-9219_3: Ch1" | |||
|
|
35 | SensorsDescription 12 = "NI-9219_3: Ch2" | |||
|
|
36 | SensorsDescription 13 = "NI-9219_3: Ch3" | |||
|
|
37 | SensorsDescription 14 = "NI-9219_3: Ch4" | |||
| 28 | VoltageDescription.<size(s)> = "4 2" |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI-9215: Ch1" |
|
39 | VoltageDescription 0 = "NI-9215: Ch1" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI-9215: Ch2" |
|
41 | VoltageDescription 2 = "NI-9215: Ch2" | |
| 32 | VoltageDescription 3 = "Zero Flux- Spannung [V]" |
|
42 | VoltageDescription 3 = "Zero Flux- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 |
|
48 | |||
| 39 | [Hardware] |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "" |
|
51 | DI_E-Stop = "" | |
| 42 | DI_Setup = "" |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM4" |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "0" |
|
54 | PowerSupply_Address = "0" | |
| 45 | PowerSupply_Baudrate = "9600" |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "10,000000" |
|
56 | PowerSupply_OutputVoltage = "10,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,800000" |
|
57 | PowerSupply_OverVoltageProtection = "9,800000" | |
| 48 | PowerSupply_MinCurrent = "0" |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "18000,000000" |
|
60 | PowerSupply_WarningPower = "18000,000000" | |
| 51 | PowerSupply_AbortPower = "20000,000000" |
|
61 | PowerSupply_AbortPower = "20000,000000" | |
| 52 | PowerSupply_PID = "FALSE" |
|
62 | PowerSupply_PID = "FALSE" | |
| 53 | PowerSupply_PID_Time = "0,100000" |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0,000000" |
|
67 | AbortCurrentDifference = "0,000000" | |
| 58 |
Measurement_Channels.<size(s)> = "1 |
|
68 | Measurement_Channels.<size(s)> = "17" | |
| 59 | Measurement_Channels 0 = "NI9215/ai0" |
|
69 | Measurement_Channels 0 = "NI9215/ai0" | |
| 60 | Measurement_Channels 1 = "NI9215/ai1" |
|
70 | Measurement_Channels 1 = "NI9215/ai1" | |
| 61 | Measurement_Channels 2 = "NI9212/ai0" |
|
71 | Measurement_Channels 2 = "NI9212/ai0" | |
| 62 | Measurement_Channels 3 = "NI9212/ai1" |
|
72 | Measurement_Channels 3 = "NI9212/ai1" | |
| 63 | Measurement_Channels 4 = "NI9212/ai2" |
|
73 | Measurement_Channels 4 = "NI9212/ai2" | |
| 64 | Measurement_Channels 5 = "NI9212/ai3" |
|
74 | Measurement_Channels 5 = "NI9212/ai3" | |
| 65 | Measurement_Channels 6 = "NI9219/ai0" |
|
75 | Measurement_Channels 6 = "NI9219_1/ai0" | |
| 66 | Measurement_Channels 7 = "NI9219/ai1" |
|
76 | Measurement_Channels 7 = "NI9219_1/ai1" | |
| 67 | Measurement_Channels 8 = "NI9219/ai2" |
|
77 | Measurement_Channels 8 = "NI9219_1/ai2" | |
| 68 | Measurement_Channels 9 = "" |
|
78 | Measurement_Channels 9 = "NI9219_2/ai0" | |
| 69 | Measurement_Channels 10 = "" |
|
79 | Measurement_Channels 10 = "NI9219_2/ai1" | |
| 70 | Measurement_Channels 11 = "" |
|
80 | Measurement_Channels 11 = "NI9219_2/ai2" | |
| 71 | Measurement_Channels 12 = "" |
|
81 | Measurement_Channels 12 = "NI9219_2/ai3" | |
|
|
82 | Measurement_Channels 13 = "NI9219_3/ai0" | |||
|
|
83 | Measurement_Channels 14 = "NI9219_3/ai1" | |||
|
|
84 | Measurement_Channels 15 = "NI9219_3/ai2" | |||
|
|
85 | Measurement_Channels 16 = "NI9219_3/ai3" | |||
| 72 | ShuntResistance = "0,005" |
|
86 | ShuntResistance = "0,005" | |
| 73 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| 74 | DMM_VISAName = "NI9219/ai3" |
|
88 | DMM_VISAName = "NI9219_1/ai3" | |
| 75 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" | |
| 76 |
TemperatureGain = "<size(s)=1 |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 77 |
TemperatureOffset = "<size(s)=1 |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" | |
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" |
|
94 | AllowedContactFails = "2" | |
| 81 |
|
95 | |||
| 82 | [HSMP2] |
|
96 | [HSMP2] | |
| 83 | DMM_Configuration.Maximum = "10,000000" |
|
97 | DMM_Configuration.Maximum = "10,000000" | |
| 84 |
DMM_Configuration.Minimum = " |
|
98 | DMM_Configuration.Minimum = "0,000000" | |
| 85 | DMM_Configuration.Configuration = "2-Wire" |
|
99 | DMM_Configuration.Configuration = "2-Wire" | |
| 86 | DMM_Configuration.CurrentExcitationSource = "Internal" |
|
100 | DMM_Configuration.CurrentExcitationSource = "Internal" | |
| 87 |
DMM_Configuration.CurrentExcitationValue = "0,000 |
|
101 | DMM_Configuration.CurrentExcitationValue = "0,000500" | |
| 88 | Configuration_AI_Voltage.<size(s)> = "2" |
|
102 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 89 | Configuration_AI_Voltage 0.Maximum = "10,000000" |
|
103 | Configuration_AI_Voltage 0.Maximum = "10,000000" | |
| 90 | Configuration_AI_Voltage 0.Minimum = "-10,000000" |
|
104 | Configuration_AI_Voltage 0.Minimum = "-10,000000" | |
| 91 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" |
|
105 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 92 | Configuration_AI_Voltage 1.Maximum = "10,000000" |
|
106 | Configuration_AI_Voltage 1.Maximum = "10,000000" | |
| 93 | Configuration_AI_Voltage 1.Minimum = "0,000000" |
|
107 | Configuration_AI_Voltage 1.Minimum = "0,000000" | |
| 94 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
108 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| 95 |
Configuration_AI_Thermocouple.<size(s)> = "1 |
|
109 | Configuration_AI_Thermocouple.<size(s)> = "15" | |
| 96 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" |
|
110 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 97 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" |
|
111 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 98 | Configuration_AI_Thermocouple 0.Type = "K" |
|
112 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 99 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" |
|
113 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 100 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" |
|
114 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" |
|
115 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 102 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" |
|
116 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 103 | Configuration_AI_Thermocouple 1.Type = "K" |
|
117 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 104 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" |
|
118 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 105 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" |
|
119 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" |
|
120 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 107 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" |
|
121 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 108 | Configuration_AI_Thermocouple 2.Type = "K" |
|
122 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 109 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" |
|
123 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 110 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" |
|
124 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" |
|
125 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 112 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" |
|
126 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 113 | Configuration_AI_Thermocouple 3.Type = "K" |
|
127 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 114 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" |
|
128 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 115 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" |
|
129 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" |
|
130 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 117 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" |
|
131 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 118 | Configuration_AI_Thermocouple 4.Type = "K" |
|
132 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 119 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" |
|
133 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 120 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" |
|
134 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" |
|
135 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 122 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" |
|
136 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 123 | Configuration_AI_Thermocouple 5.Type = "K" |
|
137 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 124 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" |
|
138 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 125 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" |
|
139 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" |
|
140 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 127 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" |
|
141 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 128 | Configuration_AI_Thermocouple 6.Type = "K" |
|
142 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 129 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" |
|
143 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 130 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" |
|
144 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" |
|
145 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 132 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" |
|
146 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 133 | Configuration_AI_Thermocouple 7.Type = "K" |
|
147 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 134 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" |
|
148 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 135 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" |
|
149 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| 136 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" |
|
150 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" | |
| 137 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" |
|
151 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" | |
| 138 | Configuration_AI_Thermocouple 8.Type = "K" |
|
152 | Configuration_AI_Thermocouple 8.Type = "K" | |
| 139 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" |
|
153 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" | |
| 140 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" |
|
154 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" | |
| 141 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" |
|
155 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" | |
| 142 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" |
|
156 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" | |
| 143 | Configuration_AI_Thermocouple 9.Type = "K" |
|
157 | Configuration_AI_Thermocouple 9.Type = "K" | |
| 144 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" |
|
158 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" | |
| 145 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" |
|
159 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" | |
| 146 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" |
|
160 | Configuration_AI_Thermocouple 10.Maximum = "250,000000" | |
| 147 |
Configuration_AI_ |
|
161 | Configuration_AI_Thermocouple 10.Minimum = "-200,000000" | |
|
|
162 | Configuration_AI_Thermocouple 10.Type = "K" | |||
|
|
163 | Configuration_AI_Thermocouple 10.CJC_Source = "Built-In" | |||
|
|
164 | Configuration_AI_Thermocouple 10.CJC_Value = "25,000000" | |||
|
|
165 | Configuration_AI_Thermocouple 11.Maximum = "250,000000" | |||
|
|
166 | Configuration_AI_Thermocouple 11.Minimum = "-200,000000" | |||
|
|
167 | Configuration_AI_Thermocouple 11.Type = "K" | |||
|
|
168 | Configuration_AI_Thermocouple 11.CJC_Source = "Built-In" | |||
|
|
169 | Configuration_AI_Thermocouple 11.CJC_Value = "25,000000" | |||
|
|
170 | Configuration_AI_Thermocouple 12.Maximum = "250,000000" | |||
|
|
171 | Configuration_AI_Thermocouple 12.Minimum = "-200,000000" | |||
|
|
172 | Configuration_AI_Thermocouple 12.Type = "K" | |||
|
|
173 | Configuration_AI_Thermocouple 12.CJC_Source = "Built-In" | |||
|
|
174 | Configuration_AI_Thermocouple 12.CJC_Value = "25,000000" | |||
|
|
175 | Configuration_AI_Thermocouple 13.Maximum = "250,000000" | |||
|
|
176 | Configuration_AI_Thermocouple 13.Minimum = "-200,000000" | |||
|
|
177 | Configuration_AI_Thermocouple 13.Type = "K" | |||
|
|
178 | Configuration_AI_Thermocouple 13.CJC_Source = "Built-In" | |||
|
|
179 | Configuration_AI_Thermocouple 13.CJC_Value = "10,000000" | |||
|
|
180 | Configuration_AI_Thermocouple 14.Maximum = "250,000000" | |||
|
|
181 | Configuration_AI_Thermocouple 14.Minimum = "-200,000000" | |||
|
|
182 | Configuration_AI_Thermocouple 14.Type = "K" | |||
|
|
183 | Configuration_AI_Thermocouple 14.CJC_Source = "Built-In" | |||
|
|
184 | Configuration_AI_Thermocouple 14.CJC_Value = "25,000000" | |||
|
|
185 | Configuration_AI_NI9219_Resistance.<size(s)> = "11" | |||
|
|
186 | Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000" | |||
| 148 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" |
|
187 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| 149 |
Configuration_AI_NI9219_Resistance 0.Configuration = " |
|
188 | Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire" | |
| 150 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" |
|
189 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 151 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" |
|
190 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 152 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" |
|
191 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 153 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" |
|
192 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
193 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 155 |
Configuration_AI_NI9219_Resistance 1.Maximum = " |
|
194 | Configuration_AI_NI9219_Resistance 1.Maximum = "800,000000" | |
| 156 |
Configuration_AI_NI9219_Resistance 1.Minimum = " |
|
195 | Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000" | |
| 157 |
Configuration_AI_NI9219_Resistance 1.Configuration = " |
|
196 | Configuration_AI_NI9219_Resistance 1.Configuration = "4-Wire" | |
| 158 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" |
|
197 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 159 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" |
|
198 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 160 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" |
|
199 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 161 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" |
|
200 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
201 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 163 |
Configuration_AI_NI9219_Resistance 2.Maximum = " |
|
202 | Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000" | |
| 164 |
Configuration_AI_NI9219_Resistance 2.Minimum = " |
|
203 | Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000" | |
| 165 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" |
|
204 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 166 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" |
|
205 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 167 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" |
|
206 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 168 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" |
|
207 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 169 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" |
|
208 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" |
|
209 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" |
|
210 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| 172 |
Configuration_AI_NI9219_Resistance 3.Minimum = " |
|
211 | Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000" | |
| 173 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" |
|
212 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 174 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" |
|
213 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 175 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" |
|
214 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 176 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" |
|
215 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 177 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" |
|
216 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 178 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
217 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 179 |
Configuration_AI_NI9219_ |
|
218 | Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000" | |
| 180 | Configuration_AI_NI9219_Type 0 = "Thermocouple" |
|
219 | Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000" | |
| 181 |
Configuration_AI_NI9219_ |
|
220 | Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire" | |
|
|
221 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal" | |||
|
|
222 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500" | |||
|
|
223 | Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750" | |||
|
|
224 | Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000" | |||
|
|
225 | Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
226 | Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000" | |||
|
|
227 | Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000" | |||
|
|
228 | Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire" | |||
|
|
229 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal" | |||
|
|
230 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500" | |||
|
|
231 | Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750" | |||
|
|
232 | Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000" | |||
|
|
233 | Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
234 | Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000" | |||
|
|
235 | Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000" | |||
|
|
236 | Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire" | |||
|
|
237 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal" | |||
|
|
238 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500" | |||
|
|
239 | Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750" | |||
|
|
240 | Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000" | |||
|
|
241 | Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
242 | Configuration_AI_NI9219_Resistance 7.Maximum = "250,000000" | |||
|
|
243 | Configuration_AI_NI9219_Resistance 7.Minimum = "-200,000000" | |||
|
|
244 | Configuration_AI_NI9219_Resistance 7.Configuration = "4-Wire" | |||
|
|
245 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationSource = "Internal" | |||
|
|
246 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationValue = "0,000500" | |||
|
|
247 | Configuration_AI_NI9219_Resistance 7.RTD_Type = "Pt3750" | |||
|
|
248 | Configuration_AI_NI9219_Resistance 7.R0 = "1000,000000" | |||
|
|
249 | Configuration_AI_NI9219_Resistance 7.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
250 | Configuration_AI_NI9219_Resistance 8.Maximum = "200,000000" | |||
|
|
251 | Configuration_AI_NI9219_Resistance 8.Minimum = "-10,000000" | |||
|
|
252 | Configuration_AI_NI9219_Resistance 8.Configuration = "4-Wire" | |||
|
|
253 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationSource = "Internal" | |||
|
|
254 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationValue = "0,000500" | |||
|
|
255 | Configuration_AI_NI9219_Resistance 8.RTD_Type = "Pt3750" | |||
|
|
256 | Configuration_AI_NI9219_Resistance 8.R0 = "1000,000000" | |||
|
|
257 | Configuration_AI_NI9219_Resistance 8.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
258 | Configuration_AI_NI9219_Resistance 9.Maximum = "250,000000" | |||
|
|
259 | Configuration_AI_NI9219_Resistance 9.Minimum = "0,000000" | |||
|
|
260 | Configuration_AI_NI9219_Resistance 9.Configuration = "4-Wire" | |||
|
|
261 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationSource = "Internal" | |||
|
|
262 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationValue = "0,000500" | |||
|
|
263 | Configuration_AI_NI9219_Resistance 9.RTD_Type = "Pt3750" | |||
|
|
264 | Configuration_AI_NI9219_Resistance 9.R0 = "1000,000000" | |||
|
|
265 | Configuration_AI_NI9219_Resistance 9.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
266 | Configuration_AI_NI9219_Resistance 10.Maximum = "250,000000" | |||
|
|
267 | Configuration_AI_NI9219_Resistance 10.Minimum = "0,000000" | |||
|
|
268 | Configuration_AI_NI9219_Resistance 10.Configuration = "2-Wire" | |||
|
|
269 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationSource = "Internal" | |||
|
|
270 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationValue = "0,000500" | |||
|
|
271 | Configuration_AI_NI9219_Resistance 10.RTD_Type = "Pt3750" | |||
|
|
272 | Configuration_AI_NI9219_Resistance 10.R0 = "1000,000000" | |||
|
|
273 | Configuration_AI_NI9219_Resistance 10.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
274 | Configuration_AI_NI9219_Type.<size(s)> = "11" | |||
|
|
275 | Configuration_AI_NI9219_Type 0 = "RTD" | |||
|
|
276 | Configuration_AI_NI9219_Type 1 = "RTD" | |||
| 182 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" |
|
277 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" | |
| 183 |
Configuration_AI_NI9219_Type 3 = " |
|
278 | Configuration_AI_NI9219_Type 3 = "Resistance_Thermistor" | |
|
|
279 | Configuration_AI_NI9219_Type 4 = "Resistance_Thermistor" | |||
|
|
280 | Configuration_AI_NI9219_Type 5 = "Resistance_Thermistor" | |||
|
|
281 | Configuration_AI_NI9219_Type 6 = "Resistance_Thermistor" | |||
|
|
282 | Configuration_AI_NI9219_Type 7 = "RTD" | |||
|
|
283 | Configuration_AI_NI9219_Type 8 = "RTD" | |||
|
|
284 | Configuration_AI_NI9219_Type 9 = "RTD" | |||
|
|
285 | Configuration_AI_NI9219_Type 10 = "Resistance_RTD" | |||
| 184 | POS_Config.IP = "10.1.2.1" |
|
286 | POS_Config.IP = "10.1.2.1" | |
| 185 | POS_Config.Port = "502" |
|
287 | POS_Config.Port = "502" | |
| 186 | POS_AxesNames.<size(s)> = "3" |
|
288 | POS_AxesNames.<size(s)> = "3" | |
| 187 | POS_AxesNames 0 = "X" |
|
289 | POS_AxesNames 0 = "X" | |
| 188 | POS_AxesNames 1 = "Y" |
|
290 | POS_AxesNames 1 = "Y" | |
| 189 | POS_AxesNames 2 = "Z" |
|
291 | POS_AxesNames 2 = "Z" | |
| 190 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" |
|
292 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" | |
| 191 | POS_Limits_Axis1 = "<size(s)=2> 0 210" |
|
293 | POS_Limits_Axis1 = "<size(s)=2> 0 210" | |
| 192 | POS_Limits_Axis2 = "<size(s)=2> 0 242" |
|
294 | POS_Limits_Axis2 = "<size(s)=2> 0 242" | |
| 193 | POS_Limits_Axis3 = "<size(s)=2> 0 111" |
|
295 | POS_Limits_Axis3 = "<size(s)=2> 0 111" | |
| 194 | POS_AxesFlipped.<size(s)> = "3" |
|
296 | POS_AxesFlipped.<size(s)> = "3" | |
| 195 | POS_AxesFlipped 0 = "True" |
|
297 | POS_AxesFlipped 0 = "True" | |
| 196 | POS_AxesFlipped 1 = "True" |
|
298 | POS_AxesFlipped 1 = "True" | |
| 197 | POS_AxesFlipped 2 = "False" |
|
299 | POS_AxesFlipped 2 = "False" | |
| 198 | Pos_MaxVelocity = "300" |
|
300 | Pos_MaxVelocity = "300" | |
| 199 | Pos_MaxAcceleration = "15000" |
|
301 | Pos_MaxAcceleration = "15000" | |
| 200 | Pos_MaxJerk = "140000" |
|
302 | Pos_MaxJerk = "140000" | |
| 201 | Pos_DO_E-Stop_Index = "0" |
|
303 | Pos_DO_E-Stop_Index = "0" | |
| 202 | Pos_DO_Setup_Index = "1" |
|
304 | Pos_DO_Setup_Index = "1" | |
| 203 |
|
305 | |||
| 204 | [DefaultValues] |
|
306 | [DefaultValues] | |
| 205 | WorkingStroke = "0" |
|
307 | WorkingStroke = "0" | |
| 206 |
MaxTemperature = "<size(s)=1 |
|
308 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" | |
| 207 | MeasurementTime = "1" |
|
309 | MeasurementTime = "1" | |
| 208 | NominalCurrent = "0" |
|
310 | NominalCurrent = "0" | |
| 209 | TableControl = False |
|
311 | TableControl = False | |
| 210 |
SensorsColor = "<size(s)=1 |
|
312 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | |
| 211 |
Sensors+.<size(s)> = "1 |
|
313 | Sensors+.<size(s)> = "15" | |
| 212 | Sensors+ 0 = "True" |
|
314 | Sensors+ 0 = "True" | |
| 213 | Sensors+ 1 = "True" |
|
315 | Sensors+ 1 = "True" | |
| 214 | Sensors+ 2 = "True" |
|
316 | Sensors+ 2 = "True" | |
| 215 | Sensors+ 3 = "True" |
|
317 | Sensors+ 3 = "True" | |
| 216 | Sensors+ 4 = "False" |
|
318 | Sensors+ 4 = "False" | |
| 217 | Sensors+ 5 = "False" |
|
319 | Sensors+ 5 = "False" | |
| 218 | Sensors+ 6 = "False" |
|
320 | Sensors+ 6 = "False" | |
| 219 | Sensors+ 7 = "False" |
|
321 | Sensors+ 7 = "False" | |
| 220 | Sensors+ 8 = "False" |
|
322 | Sensors+ 8 = "False" | |
| 221 | Sensors+ 9 = "False" |
|
323 | Sensors+ 9 = "False" | |
| 222 | SensorsFunction.<size(s)> = "10" |
|
324 | Sensors+ 10 = "False" | |
|
|
325 | Sensors+ 11 = "False" | |||
|
|
326 | Sensors+ 12 = "False" | |||
|
|
327 | Sensors+ 13 = "False" | |||
|
|
328 | Sensors+ 14 = "False" | |||
|
|
329 | SensorsFunction.<size(s)> = "15" | |||
| 223 | SensorsFunction 0 = "Umgebungstemperatur" |
|
330 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 224 | SensorsFunction 1 = "Pr�flingstemperatur" |
|
331 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 225 | SensorsFunction 2 = "Temperatur 3" |
|
332 | SensorsFunction 2 = "Temperatur 3" | |
| 226 | SensorsFunction 3 = "Temperatur 4" |
|
333 | SensorsFunction 3 = "Temperatur 4" | |
| 227 | SensorsFunction 4 = "Temperatur 5" |
|
334 | SensorsFunction 4 = "Temperatur 5" | |
| 228 | SensorsFunction 5 = "Temperatur 6" |
|
335 | SensorsFunction 5 = "Temperatur 6" | |
| 229 | SensorsFunction 6 = "Temperatur 7" |
|
336 | SensorsFunction 6 = "Temperatur 7" | |
| 230 | SensorsFunction 7 = "Temperatur 8" |
|
337 | SensorsFunction 7 = "Temperatur 8" | |
| 231 | SensorsFunction 8 = "Temperatur 9" |
|
338 | SensorsFunction 8 = "Temperatur 9" | |
| 232 | SensorsFunction 9 = "Temperatur 10" |
|
339 | SensorsFunction 9 = "Temperatur 10" | |
|
|
340 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
341 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
342 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
343 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
344 | SensorsFunction 14 = "Temperatur 15" | |||
| 233 | MovingParameter.Velocity = "20,000000" |
|
345 | MovingParameter.Velocity = "20,000000" | |
| 234 | MovingParameter.Acceleration = "50,000000" |
|
346 | MovingParameter.Acceleration = "50,000000" | |
| 235 | MovingParameter.Jerk = "140000,000000" |
|
347 | MovingParameter.Jerk = "140000,000000" | |
| 236 | Learning_Steps.X = "1,000000" |
|
348 | Learning_Steps.X = "1,000000" | |
| 237 | Learning_Steps.Y = "1,000000" |
|
349 | Learning_Steps.Y = "1,000000" | |
| 238 | Learning_Steps.Z = "1,000000" |
|
350 | Learning_Steps.Z = "1,000000" | |
| 239 |
|
351 | |||
| 240 | [Pathes] |
|
352 | [Pathes] | |
| 241 | User = "C:\Work\CurrentTester\support\User.txt" |
|
353 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 242 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" |
|
354 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" | |
| 243 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" |
|
355 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" | |
| 244 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" |
|
356 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 245 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" |
|
357 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 246 |
|
358 | |||
| 247 | [Report] |
|
359 | [Report] | |
| 248 | FileNameFormat = "%s_TestResults.txt" |
|
360 | FileNameFormat = "%s_TestResults.txt" | |
| 249 | ReportNameFormat = "%s_TestReport_%s.xlsx" |
|
361 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 250 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" |
|
362 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 251 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" |
|
363 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 252 |
|
364 | |||
| 253 | [Protocol] |
|
365 | [Protocol] | |
| 254 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" |
|
366 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 255 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" |
|
367 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 256 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" |
|
368 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 257 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" |
|
369 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 258 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" |
|
370 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 259 | ProtocolDataFolderName = "Bilder|Messungen" |
|
371 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 260 |
|
372 | |||
| 261 | [StateMessages] |
|
373 | [StateMessages] | |
| 262 | Info.<size(s)> = "28" |
|
374 | Info.<size(s)> = "28" | |
| 263 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" |
|
375 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 264 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
376 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 265 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" |
|
377 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 266 | Info 3 = "Testdaten anlegen" |
|
378 | Info 3 = "Testdaten anlegen" | |
| 267 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" |
|
379 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 268 | Info 5 = "Test geladen" |
|
380 | Info 5 = "Test geladen" | |
| 269 | Info 6 = "Laufende Pr�fung..." |
|
381 | Info 6 = "Laufende Pr�fung..." | |
| 270 | Info 7 = "Pr�fung erfolgreich abgeschlossen" |
|
382 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 271 | Info 8 = "Fehler aufgetreten!" |
|
383 | Info 8 = "Fehler aufgetreten!" | |
| 272 | Info 9 = "Test abgebrochen!" |
|
384 | Info 9 = "Test abgebrochen!" | |
| 273 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" |
|
385 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 274 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" |
|
386 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 275 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" |
|
387 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 276 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" |
|
388 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 277 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" |
|
389 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 278 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" |
|
390 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 279 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" |
|
391 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 280 | Info 17 = "Testprotokoll erstellt" |
|
392 | Info 17 = "Testprotokoll erstellt" | |
| 281 | Info 18 = "Der letzte Test ist geladen..." |
|
393 | Info 18 = "Der letzte Test ist geladen..." | |
| 282 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" |
|
394 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 283 | Info 20 = "Testbericht wird erstellt... Bitte warten" |
|
395 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 284 | Info 21 = "Testbericht erstellt" |
|
396 | Info 21 = "Testbericht erstellt" | |
| 285 | Info 22 = "Achsen werden initialisiert..." |
|
397 | Info 22 = "Achsen werden initialisiert..." | |
| 286 | Info 23 = "Referenzfahrt l�uft..." |
|
398 | Info 23 = "Referenzfahrt l�uft..." | |
| 287 | Info 24 = "X-Achse wird referenziert..." |
|
399 | Info 24 = "X-Achse wird referenziert..." | |
| 288 | Info 25 = "Y-Achse wird referenziert..." |
|
400 | Info 25 = "Y-Achse wird referenziert..." | |
| 289 | Info 26 = "Z-Achse wird referenziert..." |
|
401 | Info 26 = "Z-Achse wird referenziert..." | |
| 290 | Info 27 = "Position wird angefahren..." |
|
402 | Info 27 = "Position wird angefahren..." | |
| 291 | Result.<size(s)> = "28" |
|
403 | Result.<size(s)> = "28" | |
| 292 | Result 0 = "Not-Halt" |
|
404 | Result 0 = "Not-Halt" | |
| 293 | Result 1 = "" |
|
405 | Result 1 = "" | |
| 294 | Result 2 = "Bereit" |
|
406 | Result 2 = "Bereit" | |
| 295 | Result 3 = "Bereit" |
|
407 | Result 3 = "Bereit" | |
| 296 | Result 4 = "Einrichtbetrieb" |
|
408 | Result 4 = "Einrichtbetrieb" | |
| 297 | Result 5 = "Bereit" |
|
409 | Result 5 = "Bereit" | |
| 298 | Result 6 = "Pr�fung l�uft" |
|
410 | Result 6 = "Pr�fung l�uft" | |
| 299 | Result 7 = "Pr�fung fertig" |
|
411 | Result 7 = "Pr�fung fertig" | |
| 300 | Result 8 = "Fehler" |
|
412 | Result 8 = "Fehler" | |
| 301 | Result 9 = "Pr�fung Stop" |
|
413 | Result 9 = "Pr�fung Stop" | |
| 302 | Result 10 = "Pr�fung Stop" |
|
414 | Result 10 = "Pr�fung Stop" | |
| 303 | Result 11 = "Pr�fung Stop" |
|
415 | Result 11 = "Pr�fung Stop" | |
| 304 | Result 12 = "Pr�fung Stop" |
|
416 | Result 12 = "Pr�fung Stop" | |
| 305 | Result 13 = "Pr�fung Stop" |
|
417 | Result 13 = "Pr�fung Stop" | |
| 306 | Result 14 = "Pr�fung Stop" |
|
418 | Result 14 = "Pr�fung Stop" | |
| 307 | Result 15 = "Pr�fung Stop" |
|
419 | Result 15 = "Pr�fung Stop" | |
| 308 | Result 16 = "Bereit" |
|
420 | Result 16 = "Bereit" | |
| 309 | Result 17 = "Bereit" |
|
421 | Result 17 = "Bereit" | |
| 310 | Result 18 = "Bereit" |
|
422 | Result 18 = "Bereit" | |
| 311 | Result 19 = "Bereit" |
|
423 | Result 19 = "Bereit" | |
| 312 | Result 20 = "Bereit" |
|
424 | Result 20 = "Bereit" | |
| 313 | Result 21 = "Bereit" |
|
425 | Result 21 = "Bereit" | |
| 314 | Result 22 = "" |
|
426 | Result 22 = "" | |
| 315 | Result 23 = "Einrichtbetrieb" |
|
427 | Result 23 = "Einrichtbetrieb" | |
| 316 | Result 24 = "Einrichtbetrieb" |
|
428 | Result 24 = "Einrichtbetrieb" | |
| 317 | Result 25 = "Einrichtbetrieb" |
|
429 | Result 25 = "Einrichtbetrieb" | |
| 318 | Result 26 = "Einrichtbetrieb" |
|
430 | Result 26 = "Einrichtbetrieb" | |
| 319 | Result 27 = "Einrichtbetrieb" |
|
431 | Result 27 = "Einrichtbetrieb" | |
| 320 |
|
432 | |||
| 321 | [DialogMessages] |
|
433 | [DialogMessages] | |
| 322 | Messages.<size(s)> = "7" |
|
434 | Messages.<size(s)> = "7" | |
| 323 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" |
|
435 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 324 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
436 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 325 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
437 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 326 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" |
|
438 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 327 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
439 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 328 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
440 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 329 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
441 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,290 +1,311 | |||||
| 1 | [Tester] |
|
1 | [Tester] | |
| 2 | TesterType = "SMP3" |
|
2 | TesterType = "SMP3" | |
| 3 | TesterName = "Strommessplatz 3" |
|
3 | TesterName = "Strommessplatz 3" | |
| 4 | MaxCurrent = 130 |
|
4 | MaxCurrent = 130 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| 6 |
SensorsEnable.<size(s)> = "1 |
|
6 | SensorsEnable.<size(s)> = "15" | |
| 7 | SensorsEnable 0 = "True" |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" |
|
13 | SensorsEnable 6 = "True" | |
| 14 | SensorsEnable 7 = "True" |
|
14 | SensorsEnable 7 = "True" | |
| 15 | SensorsEnable 8 = "False" |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| 17 | SensorsDescription.<size(s)> = "10" |
|
17 | SensorsEnable 10 = "False" | |
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
22 | SensorsDescription.<size(s)> = "15" | |||
| 18 | SensorsDescription 0 = "NI-9210: Ch1" |
|
23 | SensorsDescription 0 = "NI-9210: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9210: Ch2" |
|
24 | SensorsDescription 1 = "NI-9210: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9210: Ch3" |
|
25 | SensorsDescription 2 = "NI-9210: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9210: Ch4" |
|
26 | SensorsDescription 3 = "NI-9210: Ch4" | |
| 22 | SensorsDescription 4 = "NI-9219: Ch1" |
|
27 | SensorsDescription 4 = "NI-9219: Ch1" | |
| 23 | SensorsDescription 5 = "NI-9219: Ch2" |
|
28 | SensorsDescription 5 = "NI-9219: Ch2" | |
| 24 | SensorsDescription 6 = "NI-9219: Ch3" |
|
29 | SensorsDescription 6 = "NI-9219: Ch3" | |
| 25 | SensorsDescription 7 = "NI-9219: Ch4" |
|
30 | SensorsDescription 7 = "NI-9219: Ch4" | |
| 26 | SensorsDescription 8 = "" |
|
31 | SensorsDescription 8 = "" | |
| 27 | SensorsDescription 9 = "" |
|
32 | SensorsDescription 9 = "" | |
|
|
33 | SensorsDescription 10 = "" | |||
|
|
34 | SensorsDescription 11 = "" | |||
|
|
35 | SensorsDescription 12 = "" | |||
|
|
36 | SensorsDescription 13 = "" | |||
|
|
37 | SensorsDescription 14 = "" | |||
| 28 | VoltageDescription.<size(s)> = "4 2" |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI PXI-6281: Ch4" |
|
39 | VoltageDescription 0 = "NI PXI-6281: Ch4" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI PXI-6281: Ch5" |
|
41 | VoltageDescription 2 = "NI PXI-6281: Ch5" | |
| 32 | VoltageDescription 3 = "Shunt- Spannung [V]" |
|
42 | VoltageDescription 3 = "Shunt- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 |
|
48 | |||
| 39 | [Hardware] |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "PXI1Slot5/port0/line5" |
|
51 | DI_E-Stop = "PXI1Slot5/port0/line5" | |
| 42 | DI_Setup = "PXI1Slot5/port0/line4" |
|
52 | DI_Setup = "PXI1Slot5/port0/line4" | |
| 43 | PowerSupply_VISAName = "COM4" |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "1" |
|
54 | PowerSupply_Address = "1" | |
| 45 | PowerSupply_Baudrate = "9600" |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "5,500000" |
|
56 | PowerSupply_OutputVoltage = "5,500000" | |
| 47 | PowerSupply_OverVoltageProtection = "6,000000" |
|
57 | PowerSupply_OverVoltageProtection = "6,000000" | |
| 48 | PowerSupply_MinCurrent = "0" |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "780,000000" |
|
60 | PowerSupply_WarningPower = "780,000000" | |
| 51 | PowerSupply_AbortPower = "790,000000" |
|
61 | PowerSupply_AbortPower = "790,000000" | |
| 52 | PowerSupply_PID = "False" |
|
62 | PowerSupply_PID = "False" | |
| 53 | PowerSupply_PID_Time = "0,100000" |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "50" |
|
67 | AbortCurrentDifference = "50" | |
| 58 |
Measurement_Channels.<size(s)> = "1 |
|
68 | Measurement_Channels.<size(s)> = "17" | |
| 59 | Measurement_Channels 0 = "PXI1Slot5/ai4" |
|
69 | Measurement_Channels 0 = "PXI1Slot5/ai4" | |
| 60 | Measurement_Channels 1 = "PXI1Slot5/ai5" |
|
70 | Measurement_Channels 1 = "PXI1Slot5/ai5" | |
| 61 | Measurement_Channels 2 = "NI9210/ai0" |
|
71 | Measurement_Channels 2 = "NI9210/ai0" | |
| 62 | Measurement_Channels 3 = "NI9210/ai1" |
|
72 | Measurement_Channels 3 = "NI9210/ai1" | |
| 63 | Measurement_Channels 4 = "NI9210/ai2" |
|
73 | Measurement_Channels 4 = "NI9210/ai2" | |
| 64 | Measurement_Channels 5 = "NI9210/ai3" |
|
74 | Measurement_Channels 5 = "NI9210/ai3" | |
| 65 | Measurement_Channels 6 = "NI9219/ai0" |
|
75 | Measurement_Channels 6 = "NI9219/ai0" | |
| 66 | Measurement_Channels 7 = "NI9219/ai1" |
|
76 | Measurement_Channels 7 = "NI9219/ai1" | |
| 67 | Measurement_Channels 8 = "NI9219/ai2" |
|
77 | Measurement_Channels 8 = "NI9219/ai2" | |
| 68 | Measurement_Channels 9 = "NI9219/ai3" |
|
78 | Measurement_Channels 9 = "NI9219/ai3" | |
| 69 | Measurement_Channels 10 = "" |
|
79 | Measurement_Channels 10 = "" | |
| 70 | Measurement_Channels 11 = "" |
|
80 | Measurement_Channels 11 = "" | |
|
|
81 | Measurement_Channels 12 = "" | |||
|
|
82 | Measurement_Channels 13 = "" | |||
|
|
83 | Measurement_Channels 14 = "" | |||
|
|
84 | Measurement_Channels 15 = "" | |||
|
|
85 | Measurement_Channels 16 = "" | |||
| 71 | ShuntResistance = 0,001 |
|
86 | ShuntResistance = 0,001 | |
| 72 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| 73 | DMM_VISAName = "PXI1Slot3" |
|
88 | DMM_VISAName = "PXI1Slot3" | |
| 74 | DMM_ContactLimits = "<size(s)=2> 0,0 1,0" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,0 1,0" | |
| 75 |
TemperatureGain = "<size(s)=1 |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 76 |
TemperatureOffset = "<size(s)=1 |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" | |
| 77 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 78 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 79 | AllowedContactFails = "2" |
|
94 | AllowedContactFails = "2" | |
| 80 |
|
95 | |||
| 81 | [SMP3] |
|
96 | [SMP3] | |
| 82 | DMM_Function = "2-wire Resistance" |
|
97 | DMM_Function = "2-wire Resistance" | |
| 83 | DMM_AutoRange = False |
|
98 | DMM_AutoRange = False | |
| 84 | DMM_Range = "0,020000" |
|
99 | DMM_Range = "0,020000" | |
| 85 | DMM_Resolution = "0,001000" |
|
100 | DMM_Resolution = "0,001000" | |
| 86 | Configuration_AI_Voltage.<size(s)> = "2" |
|
101 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 87 | Configuration_AI_Voltage 0.Maximum = "5,000000" |
|
102 | Configuration_AI_Voltage 0.Maximum = "5,000000" | |
| 88 | Configuration_AI_Voltage 0.Minimum = "-5,000000" |
|
103 | Configuration_AI_Voltage 0.Minimum = "-5,000000" | |
| 89 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" |
|
104 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 90 | Configuration_AI_Voltage 1.Maximum = "1,000000" |
|
105 | Configuration_AI_Voltage 1.Maximum = "1,000000" | |
| 91 | Configuration_AI_Voltage 1.Minimum = "-1,000000" |
|
106 | Configuration_AI_Voltage 1.Minimum = "-1,000000" | |
| 92 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
107 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| 93 |
Configuration_AI_Thermocouple.<size(s)> = " |
|
108 | Configuration_AI_Thermocouple.<size(s)> = "8" | |
| 94 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" |
|
109 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 95 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" |
|
110 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 96 | Configuration_AI_Thermocouple 0.Type = "K" |
|
111 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 97 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" |
|
112 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 98 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" |
|
113 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 99 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" |
|
114 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 100 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" |
|
115 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Type = "K" |
|
116 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 102 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" |
|
117 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 103 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" |
|
118 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 104 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" |
|
119 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 105 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" |
|
120 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Type = "K" |
|
121 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 107 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" |
|
122 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 108 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" |
|
123 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 109 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" |
|
124 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 110 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" |
|
125 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Type = "K" |
|
126 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 112 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" |
|
127 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 113 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" |
|
128 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 114 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" |
|
129 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 115 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" |
|
130 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Type = "K" |
|
131 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 117 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" |
|
132 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 118 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" |
|
133 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 119 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" |
|
134 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 120 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" |
|
135 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Type = "K" |
|
136 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 122 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" |
|
137 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 123 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" |
|
138 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 124 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" |
|
139 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 125 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" |
|
140 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Type = "K" |
|
141 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 127 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" |
|
142 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 128 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" |
|
143 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 129 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" |
|
144 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 130 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" |
|
145 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Type = "K" |
|
146 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 132 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" |
|
147 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 133 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" |
|
148 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| 134 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" |
|
|||
| 135 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" |
|
|||
| 136 | Configuration_AI_Thermocouple 8.Type = "K" |
|
|||
| 137 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" |
|
|||
| 138 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" |
|
|||
| 139 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" |
|
|||
| 140 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" |
|
|||
| 141 | Configuration_AI_Thermocouple 9.Type = "K" |
|
|||
| 142 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" |
|
|||
| 143 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" |
|
|||
| 144 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" |
|
149 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" | |
| 145 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" |
|
150 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" | |
| 146 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" |
|
151 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| 147 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" |
|
152 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" | |
| 148 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" |
|
153 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 149 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" |
|
154 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 150 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" |
|
155 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 151 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" |
|
156 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 152 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
157 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 153 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" |
|
158 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" |
|
159 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" | |
| 155 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" |
|
160 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" | |
| 156 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" |
|
161 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 157 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" |
|
162 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 158 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" |
|
163 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 159 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" |
|
164 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 160 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
165 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 161 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" |
|
166 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" |
|
167 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" | |
| 163 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" |
|
168 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 164 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" |
|
169 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 165 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" |
|
170 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 166 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" |
|
171 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 167 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" |
|
172 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 168 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
173 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 169 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" |
|
174 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" |
|
175 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" |
|
176 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 172 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" |
|
177 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 173 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" |
|
178 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 174 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" |
|
179 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 175 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" |
|
180 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 176 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
181 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 177 | Configuration_AI_NI9219_Type.<size(s)> = "4" |
|
182 | Configuration_AI_NI9219_Type.<size(s)> = "4" | |
| 178 | Configuration_AI_NI9219_Type 0 = "Thermocouple" |
|
183 | Configuration_AI_NI9219_Type 0 = "Thermocouple" | |
| 179 | Configuration_AI_NI9219_Type 1 = "Thermocouple" |
|
184 | Configuration_AI_NI9219_Type 1 = "Thermocouple" | |
| 180 | Configuration_AI_NI9219_Type 2 = "Thermocouple" |
|
185 | Configuration_AI_NI9219_Type 2 = "Thermocouple" | |
| 181 | Configuration_AI_NI9219_Type 3 = "Thermocouple" |
|
186 | Configuration_AI_NI9219_Type 3 = "Thermocouple" | |
| 182 |
|
187 | |||
| 183 | [DefaultValues] |
|
188 | [DefaultValues] | |
| 184 | WorkingStroke = "0" |
|
189 | WorkingStroke = "0" | |
| 185 |
MaxTemperature = "<size(s)=1 |
|
190 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" | |
| 186 | MeasurementTime = "1" |
|
191 | MeasurementTime = "1" | |
| 187 | NominalCurrent = "0" |
|
192 | NominalCurrent = "0" | |
| 188 | TableControl = False |
|
193 | TableControl = False | |
| 189 |
SensorsColor = "<size(s)=1 |
|
194 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | |
| 190 |
Sensors+.<size(s)> = "1 |
|
195 | Sensors+.<size(s)> = "15" | |
| 191 | Sensors+ 0 = "True" |
|
196 | Sensors+ 0 = "True" | |
| 192 | Sensors+ 1 = "True" |
|
197 | Sensors+ 1 = "True" | |
| 193 | Sensors+ 2 = "True" |
|
198 | Sensors+ 2 = "True" | |
| 194 | Sensors+ 3 = "True" |
|
199 | Sensors+ 3 = "True" | |
| 195 | Sensors+ 4 = "False" |
|
200 | Sensors+ 4 = "False" | |
| 196 | Sensors+ 5 = "False" |
|
201 | Sensors+ 5 = "False" | |
| 197 | Sensors+ 6 = "False" |
|
202 | Sensors+ 6 = "False" | |
| 198 | Sensors+ 7 = "False" |
|
203 | Sensors+ 7 = "False" | |
| 199 | Sensors+ 8 = "False" |
|
204 | Sensors+ 8 = "False" | |
| 200 | Sensors+ 9 = "False" |
|
205 | Sensors+ 9 = "False" | |
| 201 | SensorsFunction.<size(s)> = "10" |
|
206 | Sensors+ 10 = "False" | |
|
|
207 | Sensors+ 11 = "False" | |||
|
|
208 | Sensors+ 12 = "False" | |||
|
|
209 | Sensors+ 13 = "False" | |||
|
|
210 | Sensors+ 14 = "False" | |||
|
|
211 | SensorsFunction.<size(s)> = "15" | |||
| 202 | SensorsFunction 0 = "Umgebungstemperatur" |
|
212 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 203 | SensorsFunction 1 = "Pr�flingstemperatur" |
|
213 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 204 | SensorsFunction 2 = "Temperatur 3" |
|
214 | SensorsFunction 2 = "Temperatur 3" | |
| 205 | SensorsFunction 3 = "Temperatur 4" |
|
215 | SensorsFunction 3 = "Temperatur 4" | |
| 206 | SensorsFunction 4 = "Temperatur 5" |
|
216 | SensorsFunction 4 = "Temperatur 5" | |
| 207 | SensorsFunction 5 = "Temperatur 6" |
|
217 | SensorsFunction 5 = "Temperatur 6" | |
| 208 | SensorsFunction 6 = "Temperatur 7" |
|
218 | SensorsFunction 6 = "Temperatur 7" | |
| 209 | SensorsFunction 7 = "Temperatur 8" |
|
219 | SensorsFunction 7 = "Temperatur 8" | |
| 210 | SensorsFunction 8 = "Temperatur 9" |
|
220 | SensorsFunction 8 = "Temperatur 9" | |
| 211 | SensorsFunction 9 = "Temperatur 10" |
|
221 | SensorsFunction 9 = "Temperatur 10" | |
|
|
222 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
223 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
224 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
225 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
226 | SensorsFunction 14 = "Temperatur 15" | |||
|
|
227 | MovingParameter.Velocity = "20,000000" | |||
|
|
228 | MovingParameter.Acceleration = "50,000000" | |||
|
|
229 | MovingParameter.Jerk = "140000,000000" | |||
|
|
230 | Learning_Steps.X = "1,000000" | |||
|
|
231 | Learning_Steps.Y = "1,000000" | |||
|
|
232 | Learning_Steps.Z = "1,000000" | |||
| 212 |
|
233 | |||
| 213 | [Pathes] |
|
234 | [Pathes] | |
| 214 | User = "C:\Work\CurrentTester\support\User.txt" |
|
235 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 215 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3" |
|
236 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3" | |
| 216 | ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen" |
|
237 | ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen" | |
| 217 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" |
|
238 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 218 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" |
|
239 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 219 |
|
240 | |||
| 220 | [Report] |
|
241 | [Report] | |
| 221 | FileNameFormat = "%s_TestResults.txt" |
|
242 | FileNameFormat = "%s_TestResults.txt" | |
| 222 | ReportNameFormat = "%s_TestReport_%s.xlsx" |
|
243 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 223 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" |
|
244 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 224 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" |
|
245 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 225 |
|
246 | |||
| 226 | [Protocol] |
|
247 | [Protocol] | |
| 227 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" |
|
248 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 228 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" |
|
249 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 229 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" |
|
250 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 230 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" |
|
251 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 231 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" |
|
252 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 232 | ProtocolDataFolderName = "Bilder|Messungen" |
|
253 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 233 |
|
254 | |||
| 234 | [StateMessages] |
|
255 | [StateMessages] | |
| 235 | Info.<size(s)> = "22" |
|
256 | Info.<size(s)> = "22" | |
| 236 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" |
|
257 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 237 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
258 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 238 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" |
|
259 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 239 | Info 3 = "Testdaten anlegen" |
|
260 | Info 3 = "Testdaten anlegen" | |
| 240 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" |
|
261 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 241 | Info 5 = "Test geladen" |
|
262 | Info 5 = "Test geladen" | |
| 242 | Info 6 = "Laufende Pr�fung..." |
|
263 | Info 6 = "Laufende Pr�fung..." | |
| 243 | Info 7 = "Pr�fung erfolgreich abgeschlossen" |
|
264 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 244 | Info 8 = "Fehler aufgetreten!" |
|
265 | Info 8 = "Fehler aufgetreten!" | |
| 245 | Info 9 = "Test abgebrochen!" |
|
266 | Info 9 = "Test abgebrochen!" | |
| 246 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" |
|
267 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 247 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" |
|
268 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 248 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" |
|
269 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 249 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" |
|
270 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 250 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" |
|
271 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 251 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" |
|
272 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 252 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" |
|
273 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 253 | Info 17 = "Testprotokoll erstellt" |
|
274 | Info 17 = "Testprotokoll erstellt" | |
| 254 | Info 18 = "Der letzte Test ist geladen..." |
|
275 | Info 18 = "Der letzte Test ist geladen..." | |
| 255 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" |
|
276 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 256 | Info 20 = "Testbericht wird erstellt... Bitte warten" |
|
277 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 257 | Info 21 = "Testbericht erstellt" |
|
278 | Info 21 = "Testbericht erstellt" | |
| 258 | Result.<size(s)> = "22" |
|
279 | Result.<size(s)> = "22" | |
| 259 | Result 0 = "Not-Halt" |
|
280 | Result 0 = "Not-Halt" | |
| 260 | Result 1 = "" |
|
281 | Result 1 = "" | |
| 261 | Result 2 = "Bereit" |
|
282 | Result 2 = "Bereit" | |
| 262 | Result 3 = "Bereit" |
|
283 | Result 3 = "Bereit" | |
| 263 | Result 4 = "Einrichtbetrieb" |
|
284 | Result 4 = "Einrichtbetrieb" | |
| 264 | Result 5 = "Bereit" |
|
285 | Result 5 = "Bereit" | |
| 265 | Result 6 = "Pr�fung l�uft" |
|
286 | Result 6 = "Pr�fung l�uft" | |
| 266 | Result 7 = "Pr�fung fertig" |
|
287 | Result 7 = "Pr�fung fertig" | |
| 267 | Result 8 = "Fehler" |
|
288 | Result 8 = "Fehler" | |
| 268 | Result 9 = "Pr�fung Stop" |
|
289 | Result 9 = "Pr�fung Stop" | |
| 269 | Result 10 = "Pr�fung Stop" |
|
290 | Result 10 = "Pr�fung Stop" | |
| 270 | Result 11 = "Pr�fung Stop" |
|
291 | Result 11 = "Pr�fung Stop" | |
| 271 | Result 12 = "Pr�fung Stop" |
|
292 | Result 12 = "Pr�fung Stop" | |
| 272 | Result 13 = "Pr�fung Stop" |
|
293 | Result 13 = "Pr�fung Stop" | |
| 273 | Result 14 = "Pr�fung Stop" |
|
294 | Result 14 = "Pr�fung Stop" | |
| 274 | Result 15 = "Pr�fung Stop" |
|
295 | Result 15 = "Pr�fung Stop" | |
| 275 | Result 16 = "Bereit" |
|
296 | Result 16 = "Bereit" | |
| 276 | Result 17 = "Bereit" |
|
297 | Result 17 = "Bereit" | |
| 277 | Result 18 = "Bereit" |
|
298 | Result 18 = "Bereit" | |
| 278 | Result 19 = "Bereit" |
|
299 | Result 19 = "Bereit" | |
| 279 | Result 20 = "Bereit" |
|
300 | Result 20 = "Bereit" | |
| 280 | Result 21 = "Bereit" |
|
301 | Result 21 = "Bereit" | |
| 281 |
|
302 | |||
| 282 | [DialogMessages] |
|
303 | [DialogMessages] | |
| 283 | Messages.<size(s)> = "7" |
|
304 | Messages.<size(s)> = "7" | |
| 284 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" |
|
305 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 285 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
306 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 286 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" |
|
307 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 287 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" |
|
308 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 288 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
309 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 289 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
310 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 290 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
311 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: file was removed |
|
NO CONTENT: file was removed |
| 1 | NO CONTENT: file was removed |
|
NO CONTENT: file was removed |
General Comments 0
You need to be logged in to leave comments.
Login now