Show More
The requested changes are too big and content was truncated. Show full diff
| @@ -1,242 +1,243 | |||
|
|
1 | 1 | [Tester] |
|
|
2 |
TesterType = " |
|
|
|
3 | TesterName = "SCP-Tester" | |
|
|
2 | TesterType = "EHF1" | |
|
|
3 | TesterName = "Elektrischer Hochfrequenzmessplatz 1" | |
|
|
4 | 4 | |
|
|
5 | 5 | [Dashboard] |
|
|
6 |
Name = " |
|
|
|
7 |
Path = "C:\Work\Labor-Dashboard\ |
|
|
|
6 | Name = "EHF1" | |
|
|
7 | Path = "C:\Work\Labor-Dashboard\EHF1.html" | |
|
|
8 | 8 | |
|
|
9 | 9 | [cHardware] |
|
|
10 | 10 | POSConfig.IP = "10.1.2.1" |
|
|
11 | 11 | POSConfig.Port = "502" |
|
|
12 | 12 | POS_AxesNames.<size(s)> = "3" |
|
|
13 | 13 | POS_AxesNames 0 = "X" |
|
|
14 | 14 | POS_AxesNames 1 = "Y" |
|
|
15 | 15 | POS_AxesNames 2 = "Z" |
|
|
16 |
POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 |
|
|
|
17 |
POS_Limits_Axis1 = "<size(s)=2> 0 |
|
|
|
18 |
POS_Limits_Axis2 = "<size(s)=2> 0 |
|
|
|
19 |
POS_Limits_Axis3 = "<size(s)=2> |
|
|
|
16 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" | |
|
|
17 | POS_Limits_Axis1 = "<size(s)=2> 0 210" | |
|
|
18 | POS_Limits_Axis2 = "<size(s)=2> 0 242" | |
|
|
19 | POS_Limits_Axis3 = "<size(s)=2> 0 111" | |
|
|
20 | 20 | POS_AxesFlipped.<size(s)> = "3" |
|
|
21 | 21 | POS_AxesFlipped 0 = "True" |
|
|
22 | 22 | POS_AxesFlipped 1 = "True" |
|
|
23 | 23 | POS_AxesFlipped 2 = "False" |
|
|
24 |
Pos_MaxVelocity = " |
|
|
|
24 | Pos_MaxVelocity = "300" | |
|
|
25 | 25 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
26 |
Pos_MaxAcceleration = " |
|
|
|
26 | Pos_MaxAcceleration = "15000" | |
|
|
27 | 27 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
28 | Pos_MaxJerk = "0" | |
|
|
28 | Pos_MaxJerk = "140000" | |
|
|
29 | 29 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
30 |
ForceLimit_Axis3 = "<size(s)=5> 10,000000 |
|
|
|
30 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000" | |
|
|
31 | 31 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
32 | 32 | ForceLimit_Axis3_Text 0 = "" |
|
|
33 | 33 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
34 | 34 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
35 | 35 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
36 | 36 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
37 | 37 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
38 | 38 | AO_ForceLimit = "Dev0/Ao0" |
|
|
39 |
DI_E-Stop = "Dev |
|
|
|
40 |
DI_Door = "Dev |
|
|
|
39 | DI_E-Stop = "Dev0/AuxPort/Di0" | |
|
|
40 | DI_Door = "Dev0/AuxPort/Di1" | |
|
|
41 | 41 | DC_Wait = "100" |
|
|
42 | 42 | DC_Device_1 = "USB-6509" |
|
|
43 | 43 | DC_Device_2 = "USB-6525" |
|
|
44 | 44 | CameraWindow.<size(s)> = "2" |
|
|
45 | CameraWindow 0 = "Baumer Camera Explorer (64 Bit) v2.8.15736 " | |
|
|
46 | CameraWindow 1 = "Kamera" | |
|
|
45 | CameraWindow 0 = "Kamera" | |
|
|
46 | CameraWindow 1 = "Baumer Camera Explorer (64 Bit) v2.8.15736 " | |
|
|
47 | 47 | DMMConfig.ResourceName = "COM1" |
|
|
48 | 48 | DMMConfig.Baudrate = "9600" |
|
|
49 | 49 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
50 |
ChargeMeterConfig.ResourceName = "COM |
|
|
|
50 | ChargeMeterConfig.ResourceName = "COM10" | |
|
|
51 | 51 | ChargeMeterConfig.Baudrate = "9600" |
|
|
52 | 52 | NetworkAnalyser.Names.<size(s)> = "3" |
|
|
53 | 53 | NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)" |
|
|
54 | 54 | NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)" |
|
|
55 | 55 | NetworkAnalyser.Names 2 = "Copper Mountain (Planar 804/1)" |
|
|
56 | 56 | NetworkAnalyser.ResourceNames.<size(s)> = "3" |
|
|
57 | 57 | NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR" |
|
|
58 | 58 | NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR" |
|
|
59 | 59 | NetworkAnalyser.ResourceNames 2 = "" |
|
|
60 | 60 | NetworkAnalyser.StateFilesFolder.<size(s)> = "3" |
|
|
61 | 61 | NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\" |
|
|
62 | 62 | NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\" |
|
|
63 | 63 | NetworkAnalyser.StateFilesFolder 2 = "C:\Work\PositioningSystem\support\Planar804\StateFiles" |
|
|
64 | 64 | NetworkAnalyser.TestResultFolder.<size(s)> = "3" |
|
|
65 | 65 | NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
66 | 66 | NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
67 | 67 | NetworkAnalyser.TestResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
68 | 68 | NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S" |
|
|
69 | 69 | NetworkAnalyser.ResultFolder.<size(s)> = "3" |
|
|
70 | 70 | NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
71 | 71 | NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
72 | 72 | NetworkAnalyser.ResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
73 | 73 | NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF" |
|
|
74 | 74 | NetworkAnalyser.CommonMemory.<size(s)> = "2" |
|
|
75 | 75 | NetworkAnalyser.CommonMemory 0 = "Z:\" |
|
|
76 | 76 | NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\" |
|
|
77 | DOs.<size(s)> = "2" | |
|
|
78 | DOs 0 = "Dev2/port4/line0" | |
|
|
79 | DOs 1 = "Dev2/port4/line1" | |
|
|
80 | 77 | |
|
|
81 | 78 | [cPathes] |
|
|
82 | 79 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
83 | 80 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
84 | 81 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
85 | 82 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
86 | 83 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
87 | 84 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
88 | 85 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
89 | 86 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
90 | 87 | pLimits = "C:\Work\PositioningSystem\support\Limits" |
|
|
91 | 88 | pNetwork = "C:\Work\PositioningSystem\support\CopyFolder" |
|
|
92 | 89 | |
|
|
93 | 90 | [cDefaultValues] |
|
|
94 | 91 | MovingParameter.Velocity = "20,000000" |
|
|
95 |
MovingParameter.Acceleration = " |
|
|
|
96 | MovingParameter.Jerk = "0,000000" | |
|
|
92 | MovingParameter.Acceleration = "50,000000" | |
|
|
93 | MovingParameter.Jerk = "140000,000000" | |
|
|
97 | 94 | ForceLimit_Z = "0" |
|
|
98 | 95 | Learning_Steps.Axis1 = "0,0500000" |
|
|
99 | 96 | Learning_Steps.Axis2 = "0,0500000" |
|
|
100 | 97 | Learning_Steps.Axis3 = "1,000000" |
|
|
101 | 98 | Learning_ZStopOffset = "-2,000000" |
|
|
102 | 99 | Learning_Measurements = "3" |
|
|
103 | 100 | Learning_NetworkAnalyser = "0" |
|
|
104 | 101 | Comment = "" |
|
|
105 | 102 | Matrix_WorkingStroke = "4,000000" |
|
|
106 | 103 | Matrix_Z- = "1,000000" |
|
|
107 | 104 | Matrix_Contacts = "1" |
|
|
108 | 105 | Matrix_XDelta = "1,000000" |
|
|
109 | 106 | Matrix_XSize = "2" |
|
|
110 | 107 | Matrix_YDelta = "1,000000" |
|
|
111 | 108 | Matrix_YSize = "2" |
|
|
112 | 109 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
113 | 110 | TestRun_LoopsNumber = "2" |
|
|
114 | 111 | TestRun_Delay = "100" |
|
|
115 | 112 | TestRun_-Z = "1" |
|
|
116 | 113 | TestRun_Stroke = "4" |
|
|
117 | 114 | TestRun_Time = "0" |
|
|
118 | 115 | TestRun_StrokesNumber = "10" |
|
|
119 | 116 | |
|
|
120 | 117 | |
|
|
121 | 118 | [cReport] |
|
|
122 | 119 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
123 | 120 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
124 | 121 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
125 | 122 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
126 | 123 | FileNameFormat_Camera = "%d.%m.%Y-%H%M%S.png" |
|
|
127 | 124 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
128 | 125 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
129 | 126 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
130 | 127 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
131 | 128 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
132 | 129 | StandardTemplate.<size(s)> = "4" |
|
|
133 | 130 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
134 | 131 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
135 | 132 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
136 | 133 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
137 | 134 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
138 | 135 | StandardTemplate_Scripts.<size(s)> = "7" |
|
|
139 | 136 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
140 | 137 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
141 | 138 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
142 | 139 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
143 | 140 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
144 | 141 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
145 | 142 | StandardTemplate_Scripts 6 = "AktualisiereXYDiagrammHF" |
|
|
146 | 143 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
147 | 144 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
148 | 145 | HFTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\HFTemplate.xlsx" |
|
|
149 | 146 | CameraSubset.Left = "274" |
|
|
150 | 147 | CameraSubset.Top = "40" |
|
|
151 | 148 | CameraSubset.Right = "1616" |
|
|
152 | 149 | CameraSubset.Bottom = "1048" |
|
|
153 | 150 | |
|
|
154 | 151 | [cStateMessages] |
|
|
155 |
Info.<size(s)> = "3 |
|
|
|
152 | Info.<size(s)> = "32" | |
|
|
156 | 153 | Info 0 = "Not-Halt aktiviert!" |
|
|
157 | 154 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
158 | 155 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
159 | 156 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
160 | 157 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
161 | 158 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
162 | 159 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
163 | 160 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
164 | 161 | Info 8 = "Testdaten anlegen" |
|
|
165 | 162 | Info 9 = "Lernfahrten" |
|
|
166 | 163 | Info 10 = "Achsen werden initialisiert..." |
|
|
167 | 164 | Info 11 = "Referenzfahrt l�uft..." |
|
|
168 | 165 | Info 12 = "X-Achse wird referenziert..." |
|
|
169 | 166 | Info 13 = "Y-Achse wird referenziert..." |
|
|
170 | 167 | Info 14 = "Z-Achse wird referenziert..." |
|
|
171 | 168 | Info 15 = "Position wird angefahren..." |
|
|
172 | 169 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
173 | 170 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
174 | 171 | Info 18 = "Kamerabild wird gespeichert..." |
|
|
175 | 172 | Info 19 = "Testablauf" |
|
|
176 | 173 | Info 20 = "Test geladen" |
|
|
177 | 174 | Info 21 = "Laufender Test..." |
|
|
178 | 175 | Info 22 = "Verz�gerung l�uft..." |
|
|
179 | 176 | Info 23 = "Messung wird durchgef�hrt..." |
|
|
180 | 177 | Info 24 = "Lastwechsel wird ausgef�hrt..." |
|
|
181 | 178 | Info 25 = "Test erfolgreich abgeschlossen" |
|
|
182 | Info 26 = "Fehler aufgetreten!" | |
|
|
183 |
Info 27 = "Test |
|
|
|
184 | Info 28 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
185 | Info 29 = "Messergebnisse wurden exportiert" | |
|
|
186 | Result.<size(s)> = "30" | |
|
|
179 | Info 26 = "Test bestanden" | |
|
|
180 | Info 27 = "Test fehlgeschlagen" | |
|
|
181 | Info 28 = "Fehler aufgetreten!" | |
|
|
182 | Info 29 = "Test abgebrochen!" | |
|
|
183 | Info 30 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
184 | Info 31 = "Messergebnisse wurden exportiert" | |
|
|
185 | Result.<size(s)> = "32" | |
|
|
187 | 186 | Result 0 = "Not-Halt" |
|
|
188 | 187 | Result 1 = "" |
|
|
189 | 188 | Result 2 = "" |
|
|
190 | 189 | Result 3 = "" |
|
|
191 | 190 | Result 4 = "Einrichtbetrieb" |
|
|
192 | 191 | Result 5 = "Einrichtbetrieb" |
|
|
193 | 192 | Result 6 = "Einrichtbetrieb" |
|
|
194 | 193 | Result 7 = "" |
|
|
195 |
Result 8 = " |
|
|
|
194 | Result 8 = "" | |
|
|
196 | 195 | Result 9 = "Einrichtbetrieb" |
|
|
197 | 196 | Result 10 = "Einrichtbetrieb" |
|
|
198 | 197 | Result 11 = "Einrichtbetrieb" |
|
|
199 | 198 | Result 12 = "Einrichtbetrieb" |
|
|
200 | 199 | Result 13 = "Einrichtbetrieb" |
|
|
201 | 200 | Result 14 = "Einrichtbetrieb" |
|
|
202 | 201 | Result 15 = "Einrichtbetrieb" |
|
|
203 | 202 | Result 16 = "Einrichtbetrieb" |
|
|
204 | 203 | Result 17 = "Einrichtbetrieb" |
|
|
205 |
Result 18 = " |
|
|
|
206 |
Result 19 = " |
|
|
|
207 |
Result 20 = " |
|
|
|
204 | Result 18 = "" | |
|
|
205 | Result 19 = "" | |
|
|
206 | Result 20 = "" | |
|
|
208 | 207 | Result 21 = "Test l�uft" |
|
|
209 | 208 | Result 22 = "Test l�uft" |
|
|
210 | 209 | Result 23 = "Einrichtbetrieb" |
|
|
211 | 210 | Result 24 = "Test l�uft" |
|
|
212 |
Result 25 = " |
|
|
|
213 |
Result 26 = " |
|
|
|
214 |
Result 27 = " |
|
|
|
215 | Result 28 = "" | |
|
|
216 | Result 29 = "" | |
|
|
211 | Result 25 = "Fertig" | |
|
|
212 | Result 26 = "Bestanden" | |
|
|
213 | Result 27 = "Fehlgeschlagen" | |
|
|
214 | Result 28 = "Fehler" | |
|
|
215 | Result 29 = "Stop" | |
|
|
216 | Result 30 = "" | |
|
|
217 | Result 31 = "" | |
|
|
217 | 218 | |
|
|
218 | 219 | [cDialogMessages] |
|
|
219 | 220 | Messages.<size(s)> = "15" |
|
|
220 | 221 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
221 | 222 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
222 | 223 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
223 | 224 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
224 | 225 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
225 | 226 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
226 | 227 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
227 | 228 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
228 | 229 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
229 | 230 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
230 | 231 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
231 | 232 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." |
|
|
232 | 233 | Messages 12 = "Geben Sie einen Namen f�r die Limits ein" |
|
|
233 | 234 | Messages 13 = "W�hlen Sie die Parameter f�r die �berschreibung aller ausgew�hlten Positionen aus und geben Sie diese ein:" |
|
|
234 | 235 | Messages 14 = "Kein HF-Testschritt mit Radiusmessung und Testbestehenskriterien" |
|
|
235 | 236 | |
|
|
236 | 237 | [cCAQ] |
|
|
237 |
Login = "Teste |
|
|
|
238 |
Pw = "Tester |
|
|
|
239 | AuthIDFile = "\\orion\G K S - Test1\CAQ.txt" | |
|
|
240 | AuthID = "" | |
|
|
238 | Login = "EHF1-Tester" | |
|
|
239 | Pw = "EHF1-Tester" | |
|
|
240 | AuthIDFile = "" | |
|
|
241 | AuthID = "XB2F9FAFD5559F4FB5B92FE524B40D8A3C" | |
|
|
241 | 242 | MAPNumber = 130 |
|
|
242 | 243 | LocationName = "GKS Montage HF-Tester" No newline at end of file |
| @@ -1,239 +1,243 | |||
|
|
1 | 1 | [Tester] |
|
|
2 | 2 | TesterType = "EHF1" |
|
|
3 | 3 | TesterName = "Elektrischer Hochfrequenzmessplatz 1" |
|
|
4 | 4 | |
|
|
5 | 5 | [Dashboard] |
|
|
6 | 6 | Name = "EHF1" |
|
|
7 | 7 | Path = "C:\Work\Labor-Dashboard\EHF1.html" |
|
|
8 | 8 | |
|
|
9 | 9 | [cHardware] |
|
|
10 | 10 | POSConfig.IP = "10.1.2.1" |
|
|
11 | 11 | POSConfig.Port = "502" |
|
|
12 | 12 | POS_AxesNames.<size(s)> = "3" |
|
|
13 | 13 | POS_AxesNames 0 = "X" |
|
|
14 | 14 | POS_AxesNames 1 = "Y" |
|
|
15 | 15 | POS_AxesNames 2 = "Z" |
|
|
16 | 16 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" |
|
|
17 | 17 | POS_Limits_Axis1 = "<size(s)=2> 0 210" |
|
|
18 | 18 | POS_Limits_Axis2 = "<size(s)=2> 0 242" |
|
|
19 | 19 | POS_Limits_Axis3 = "<size(s)=2> 0 111" |
|
|
20 | 20 | POS_AxesFlipped.<size(s)> = "3" |
|
|
21 | 21 | POS_AxesFlipped 0 = "True" |
|
|
22 | 22 | POS_AxesFlipped 1 = "True" |
|
|
23 | 23 | POS_AxesFlipped 2 = "False" |
|
|
24 | 24 | Pos_MaxVelocity = "300" |
|
|
25 | 25 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
26 | 26 | Pos_MaxAcceleration = "15000" |
|
|
27 | 27 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
28 | 28 | Pos_MaxJerk = "140000" |
|
|
29 | 29 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
30 | 30 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000" |
|
|
31 | 31 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
32 | 32 | ForceLimit_Axis3_Text 0 = "" |
|
|
33 | 33 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
34 | 34 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
35 | 35 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
36 | 36 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
37 | 37 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
38 | 38 | AO_ForceLimit = "Dev0/Ao0" |
|
|
39 | 39 | DI_E-Stop = "Dev0/AuxPort/Di0" |
|
|
40 | 40 | DI_Door = "Dev0/AuxPort/Di1" |
|
|
41 | 41 | DC_Wait = "100" |
|
|
42 | 42 | DC_Device_1 = "USB-6509" |
|
|
43 | 43 | DC_Device_2 = "USB-6525" |
|
|
44 | 44 | CameraWindow.<size(s)> = "2" |
|
|
45 | 45 | CameraWindow 0 = "Kamera" |
|
|
46 | 46 | CameraWindow 1 = "Baumer Camera Explorer (64 Bit) v2.8.15736 " |
|
|
47 | 47 | DMMConfig.ResourceName = "COM1" |
|
|
48 | 48 | DMMConfig.Baudrate = "9600" |
|
|
49 | 49 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
50 | 50 | ChargeMeterConfig.ResourceName = "COM10" |
|
|
51 | 51 | ChargeMeterConfig.Baudrate = "9600" |
|
|
52 | 52 | NetworkAnalyser.Names.<size(s)> = "3" |
|
|
53 | 53 | NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)" |
|
|
54 | 54 | NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)" |
|
|
55 | 55 | NetworkAnalyser.Names 2 = "Copper Mountain (Planar 804/1)" |
|
|
56 | 56 | NetworkAnalyser.ResourceNames.<size(s)> = "3" |
|
|
57 | 57 | NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR" |
|
|
58 | 58 | NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR" |
|
|
59 | 59 | NetworkAnalyser.ResourceNames 2 = "" |
|
|
60 | 60 | NetworkAnalyser.StateFilesFolder.<size(s)> = "3" |
|
|
61 | 61 | NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\" |
|
|
62 | 62 | NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\" |
|
|
63 | 63 | NetworkAnalyser.StateFilesFolder 2 = "C:\Work\PositioningSystem\support\Planar804\StateFiles" |
|
|
64 | 64 | NetworkAnalyser.TestResultFolder.<size(s)> = "3" |
|
|
65 | 65 | NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
66 | 66 | NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
67 | 67 | NetworkAnalyser.TestResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
68 | 68 | NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S" |
|
|
69 | 69 | NetworkAnalyser.ResultFolder.<size(s)> = "3" |
|
|
70 | 70 | NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
71 | 71 | NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
72 | 72 | NetworkAnalyser.ResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
73 | 73 | NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF" |
|
|
74 | 74 | NetworkAnalyser.CommonMemory.<size(s)> = "2" |
|
|
75 | 75 | NetworkAnalyser.CommonMemory 0 = "Z:\" |
|
|
76 | 76 | NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\" |
|
|
77 | 77 | |
|
|
78 | 78 | [cPathes] |
|
|
79 | 79 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
80 | 80 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
81 | 81 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
82 | 82 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
83 | 83 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
84 | 84 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
85 | 85 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
86 | 86 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
87 | 87 | pLimits = "C:\Work\PositioningSystem\support\Limits" |
|
|
88 | 88 | pNetwork = "C:\Work\PositioningSystem\support\CopyFolder" |
|
|
89 | 89 | |
|
|
90 | 90 | [cDefaultValues] |
|
|
91 | 91 | MovingParameter.Velocity = "20,000000" |
|
|
92 | 92 | MovingParameter.Acceleration = "50,000000" |
|
|
93 | 93 | MovingParameter.Jerk = "140000,000000" |
|
|
94 | 94 | ForceLimit_Z = "0" |
|
|
95 | 95 | Learning_Steps.Axis1 = "0,0500000" |
|
|
96 | 96 | Learning_Steps.Axis2 = "0,0500000" |
|
|
97 | 97 | Learning_Steps.Axis3 = "1,000000" |
|
|
98 | 98 | Learning_ZStopOffset = "-2,000000" |
|
|
99 | 99 | Learning_Measurements = "3" |
|
|
100 | 100 | Learning_NetworkAnalyser = "0" |
|
|
101 | 101 | Comment = "" |
|
|
102 | 102 | Matrix_WorkingStroke = "4,000000" |
|
|
103 | 103 | Matrix_Z- = "1,000000" |
|
|
104 | 104 | Matrix_Contacts = "1" |
|
|
105 | 105 | Matrix_XDelta = "1,000000" |
|
|
106 | 106 | Matrix_XSize = "2" |
|
|
107 | 107 | Matrix_YDelta = "1,000000" |
|
|
108 | 108 | Matrix_YSize = "2" |
|
|
109 | 109 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
110 | 110 | TestRun_LoopsNumber = "2" |
|
|
111 | 111 | TestRun_Delay = "100" |
|
|
112 | 112 | TestRun_-Z = "1" |
|
|
113 | 113 | TestRun_Stroke = "4" |
|
|
114 | 114 | TestRun_Time = "0" |
|
|
115 | 115 | TestRun_StrokesNumber = "10" |
|
|
116 | 116 | |
|
|
117 | 117 | |
|
|
118 | 118 | [cReport] |
|
|
119 | 119 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
120 | 120 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
121 | 121 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
122 | 122 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
123 | 123 | FileNameFormat_Camera = "%d.%m.%Y-%H%M%S.png" |
|
|
124 | 124 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
125 | 125 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
126 | 126 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
127 | 127 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
128 | 128 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
129 | 129 | StandardTemplate.<size(s)> = "4" |
|
|
130 | 130 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
131 | 131 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
132 | 132 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
133 | 133 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
134 | 134 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
135 | 135 | StandardTemplate_Scripts.<size(s)> = "7" |
|
|
136 | 136 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
137 | 137 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
138 | 138 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
139 | 139 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
140 | 140 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
141 | 141 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
142 | 142 | StandardTemplate_Scripts 6 = "AktualisiereXYDiagrammHF" |
|
|
143 | 143 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
144 | 144 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
145 | 145 | HFTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\HFTemplate.xlsx" |
|
|
146 | 146 | CameraSubset.Left = "274" |
|
|
147 | 147 | CameraSubset.Top = "40" |
|
|
148 | 148 | CameraSubset.Right = "1616" |
|
|
149 | 149 | CameraSubset.Bottom = "1048" |
|
|
150 | 150 | |
|
|
151 | 151 | [cStateMessages] |
|
|
152 |
Info.<size(s)> = "3 |
|
|
|
152 | Info.<size(s)> = "32" | |
|
|
153 | 153 | Info 0 = "Not-Halt aktiviert!" |
|
|
154 | 154 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
155 | 155 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
156 | 156 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
157 | 157 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
158 | 158 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
159 | 159 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
160 | 160 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
161 | 161 | Info 8 = "Testdaten anlegen" |
|
|
162 | 162 | Info 9 = "Lernfahrten" |
|
|
163 | 163 | Info 10 = "Achsen werden initialisiert..." |
|
|
164 | 164 | Info 11 = "Referenzfahrt l�uft..." |
|
|
165 | 165 | Info 12 = "X-Achse wird referenziert..." |
|
|
166 | 166 | Info 13 = "Y-Achse wird referenziert..." |
|
|
167 | 167 | Info 14 = "Z-Achse wird referenziert..." |
|
|
168 | 168 | Info 15 = "Position wird angefahren..." |
|
|
169 | 169 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
170 | 170 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
171 | 171 | Info 18 = "Kamerabild wird gespeichert..." |
|
|
172 | 172 | Info 19 = "Testablauf" |
|
|
173 | 173 | Info 20 = "Test geladen" |
|
|
174 | 174 | Info 21 = "Laufender Test..." |
|
|
175 | 175 | Info 22 = "Verz�gerung l�uft..." |
|
|
176 | 176 | Info 23 = "Messung wird durchgef�hrt..." |
|
|
177 | 177 | Info 24 = "Lastwechsel wird ausgef�hrt..." |
|
|
178 | 178 | Info 25 = "Test erfolgreich abgeschlossen" |
|
|
179 | Info 26 = "Fehler aufgetreten!" | |
|
|
180 |
Info 27 = "Test |
|
|
|
181 | Info 28 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
182 | Info 29 = "Messergebnisse wurden exportiert" | |
|
|
183 | Result.<size(s)> = "30" | |
|
|
179 | Info 26 = "Test bestanden" | |
|
|
180 | Info 27 = "Test fehlgeschlagen" | |
|
|
181 | Info 28 = "Fehler aufgetreten!" | |
|
|
182 | Info 29 = "Test abgebrochen!" | |
|
|
183 | Info 30 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
184 | Info 31 = "Messergebnisse wurden exportiert" | |
|
|
185 | Result.<size(s)> = "32" | |
|
|
184 | 186 | Result 0 = "Not-Halt" |
|
|
185 | 187 | Result 1 = "" |
|
|
186 | 188 | Result 2 = "" |
|
|
187 | 189 | Result 3 = "" |
|
|
188 | 190 | Result 4 = "Einrichtbetrieb" |
|
|
189 | 191 | Result 5 = "Einrichtbetrieb" |
|
|
190 | 192 | Result 6 = "Einrichtbetrieb" |
|
|
191 | 193 | Result 7 = "" |
|
|
192 |
Result 8 = " |
|
|
|
194 | Result 8 = "" | |
|
|
193 | 195 | Result 9 = "Einrichtbetrieb" |
|
|
194 | 196 | Result 10 = "Einrichtbetrieb" |
|
|
195 | 197 | Result 11 = "Einrichtbetrieb" |
|
|
196 | 198 | Result 12 = "Einrichtbetrieb" |
|
|
197 | 199 | Result 13 = "Einrichtbetrieb" |
|
|
198 | 200 | Result 14 = "Einrichtbetrieb" |
|
|
199 | 201 | Result 15 = "Einrichtbetrieb" |
|
|
200 | 202 | Result 16 = "Einrichtbetrieb" |
|
|
201 | 203 | Result 17 = "Einrichtbetrieb" |
|
|
202 |
Result 18 = " |
|
|
|
203 |
Result 19 = " |
|
|
|
204 |
Result 20 = " |
|
|
|
204 | Result 18 = "" | |
|
|
205 | Result 19 = "" | |
|
|
206 | Result 20 = "" | |
|
|
205 | 207 | Result 21 = "Test l�uft" |
|
|
206 | 208 | Result 22 = "Test l�uft" |
|
|
207 | 209 | Result 23 = "Einrichtbetrieb" |
|
|
208 | 210 | Result 24 = "Test l�uft" |
|
|
209 |
Result 25 = " |
|
|
|
210 |
Result 26 = " |
|
|
|
211 |
Result 27 = " |
|
|
|
212 | Result 28 = "" | |
|
|
213 | Result 29 = "" | |
|
|
211 | Result 25 = "Fertig" | |
|
|
212 | Result 26 = "Bestanden" | |
|
|
213 | Result 27 = "Fehlgeschlagen" | |
|
|
214 | Result 28 = "Fehler" | |
|
|
215 | Result 29 = "Stop" | |
|
|
216 | Result 30 = "" | |
|
|
217 | Result 31 = "" | |
|
|
214 | 218 | |
|
|
215 | 219 | [cDialogMessages] |
|
|
216 | 220 | Messages.<size(s)> = "15" |
|
|
217 | 221 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
218 | 222 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
219 | 223 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
220 | 224 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
221 | 225 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
222 | 226 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
223 | 227 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
224 | 228 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
225 | 229 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
226 | 230 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
227 | 231 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
228 | 232 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." |
|
|
229 | 233 | Messages 12 = "Geben Sie einen Namen f�r die Limits ein" |
|
|
230 | 234 | Messages 13 = "W�hlen Sie die Parameter f�r die �berschreibung aller ausgew�hlten Positionen aus und geben Sie diese ein:" |
|
|
231 | 235 | Messages 14 = "Kein HF-Testschritt mit Radiusmessung und Testbestehenskriterien" |
|
|
232 | 236 | |
|
|
233 | 237 | [cCAQ] |
|
|
234 | 238 | Login = "EHF1-Tester" |
|
|
235 | 239 | Pw = "EHF1-Tester" |
|
|
236 | 240 | AuthIDFile = "" |
|
|
237 | 241 | AuthID = "XB2F9FAFD5559F4FB5B92FE524B40D8A3C" |
|
|
238 | 242 | MAPNumber = 130 |
|
|
239 | 243 | LocationName = "GKS Montage HF-Tester" No newline at end of file |
| @@ -1,242 +1,246 | |||
|
|
1 | 1 | [Tester] |
|
|
2 | 2 | TesterType = "SCP" |
|
|
3 | 3 | TesterName = "SCP-Tester" |
|
|
4 | 4 | |
|
|
5 | 5 | [Dashboard] |
|
|
6 | 6 | Name = "SCP" |
|
|
7 | 7 | Path = "C:\Work\Labor-Dashboard\SCP.html" |
|
|
8 | 8 | |
|
|
9 | 9 | [cHardware] |
|
|
10 | 10 | POSConfig.IP = "10.1.2.1" |
|
|
11 | 11 | POSConfig.Port = "502" |
|
|
12 | 12 | POS_AxesNames.<size(s)> = "3" |
|
|
13 | 13 | POS_AxesNames 0 = "X" |
|
|
14 | 14 | POS_AxesNames 1 = "Y" |
|
|
15 | 15 | POS_AxesNames 2 = "Z" |
|
|
16 | 16 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000" |
|
|
17 | 17 | POS_Limits_Axis1 = "<size(s)=2> 0 325" |
|
|
18 | 18 | POS_Limits_Axis2 = "<size(s)=2> 0 350" |
|
|
19 | 19 | POS_Limits_Axis3 = "<size(s)=2> -44 0" |
|
|
20 | 20 | POS_AxesFlipped.<size(s)> = "3" |
|
|
21 | 21 | POS_AxesFlipped 0 = "True" |
|
|
22 | 22 | POS_AxesFlipped 1 = "True" |
|
|
23 | 23 | POS_AxesFlipped 2 = "False" |
|
|
24 | 24 | Pos_MaxVelocity = "600" |
|
|
25 | 25 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
26 | 26 | Pos_MaxAcceleration = "40000" |
|
|
27 | 27 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
28 | 28 | Pos_MaxJerk = "0" |
|
|
29 | 29 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
30 | 30 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000" |
|
|
31 | 31 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
32 | 32 | ForceLimit_Axis3_Text 0 = "" |
|
|
33 | 33 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
34 | 34 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
35 | 35 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
36 | 36 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
37 | 37 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
38 | 38 | AO_ForceLimit = "Dev0/Ao0" |
|
|
39 | 39 | DI_E-Stop = "Dev2/port0/line0" |
|
|
40 | 40 | DI_Door = "Dev2/port0/line1" |
|
|
41 | 41 | DC_Wait = "100" |
|
|
42 | 42 | DC_Device_1 = "USB-6509" |
|
|
43 | 43 | DC_Device_2 = "USB-6525" |
|
|
44 | 44 | CameraWindow.<size(s)> = "2" |
|
|
45 | 45 | CameraWindow 0 = "Baumer Camera Explorer (64 Bit) v2.8.15736 " |
|
|
46 | 46 | CameraWindow 1 = "Kamera" |
|
|
47 | 47 | DMMConfig.ResourceName = "COM1" |
|
|
48 | 48 | DMMConfig.Baudrate = "9600" |
|
|
49 | 49 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
50 | 50 | ChargeMeterConfig.ResourceName = "COM2" |
|
|
51 | 51 | ChargeMeterConfig.Baudrate = "9600" |
|
|
52 | 52 | NetworkAnalyser.Names.<size(s)> = "3" |
|
|
53 | 53 | NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)" |
|
|
54 | 54 | NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)" |
|
|
55 | 55 | NetworkAnalyser.Names 2 = "Copper Mountain (Planar 804/1)" |
|
|
56 | 56 | NetworkAnalyser.ResourceNames.<size(s)> = "3" |
|
|
57 | 57 | NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR" |
|
|
58 | 58 | NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR" |
|
|
59 | 59 | NetworkAnalyser.ResourceNames 2 = "" |
|
|
60 | 60 | NetworkAnalyser.StateFilesFolder.<size(s)> = "3" |
|
|
61 | 61 | NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\" |
|
|
62 | 62 | NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\" |
|
|
63 | 63 | NetworkAnalyser.StateFilesFolder 2 = "C:\Work\PositioningSystem\support\Planar804\StateFiles" |
|
|
64 | 64 | NetworkAnalyser.TestResultFolder.<size(s)> = "3" |
|
|
65 | 65 | NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
66 | 66 | NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
67 | 67 | NetworkAnalyser.TestResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
68 | 68 | NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S" |
|
|
69 | 69 | NetworkAnalyser.ResultFolder.<size(s)> = "3" |
|
|
70 | 70 | NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ZVA67\" |
|
|
71 | 71 | NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ZNL20\" |
|
|
72 | 72 | NetworkAnalyser.ResultFolder 2 = "C:\Work\PositioningSystem\support\Planar804\" |
|
|
73 | 73 | NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF" |
|
|
74 | 74 | NetworkAnalyser.CommonMemory.<size(s)> = "2" |
|
|
75 | 75 | NetworkAnalyser.CommonMemory 0 = "Z:\" |
|
|
76 | 76 | NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\" |
|
|
77 | 77 | DOs.<size(s)> = "2" |
|
|
78 | 78 | DOs 0 = "Dev2/port4/line0" |
|
|
79 | 79 | DOs 1 = "Dev2/port4/line1" |
|
|
80 | 80 | |
|
|
81 | 81 | [cPathes] |
|
|
82 | 82 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
83 | 83 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
84 | 84 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
85 | 85 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
86 | 86 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
87 | 87 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
88 | 88 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
89 | 89 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
90 | 90 | pLimits = "C:\Work\PositioningSystem\support\Limits" |
|
|
91 | 91 | pNetwork = "C:\Work\PositioningSystem\support\CopyFolder" |
|
|
92 | 92 | |
|
|
93 | 93 | [cDefaultValues] |
|
|
94 | 94 | MovingParameter.Velocity = "20,000000" |
|
|
95 | 95 | MovingParameter.Acceleration = "20,000000" |
|
|
96 | 96 | MovingParameter.Jerk = "0,000000" |
|
|
97 | 97 | ForceLimit_Z = "0" |
|
|
98 | 98 | Learning_Steps.Axis1 = "0,0500000" |
|
|
99 | 99 | Learning_Steps.Axis2 = "0,0500000" |
|
|
100 | 100 | Learning_Steps.Axis3 = "1,000000" |
|
|
101 | 101 | Learning_ZStopOffset = "-2,000000" |
|
|
102 | 102 | Learning_Measurements = "3" |
|
|
103 | 103 | Learning_NetworkAnalyser = "0" |
|
|
104 | 104 | Comment = "" |
|
|
105 | 105 | Matrix_WorkingStroke = "4,000000" |
|
|
106 | 106 | Matrix_Z- = "1,000000" |
|
|
107 | 107 | Matrix_Contacts = "1" |
|
|
108 | 108 | Matrix_XDelta = "1,000000" |
|
|
109 | 109 | Matrix_XSize = "2" |
|
|
110 | 110 | Matrix_YDelta = "1,000000" |
|
|
111 | 111 | Matrix_YSize = "2" |
|
|
112 | 112 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
113 | 113 | TestRun_LoopsNumber = "2" |
|
|
114 | 114 | TestRun_Delay = "100" |
|
|
115 | 115 | TestRun_-Z = "1" |
|
|
116 | 116 | TestRun_Stroke = "4" |
|
|
117 | 117 | TestRun_Time = "0" |
|
|
118 | 118 | TestRun_StrokesNumber = "10" |
|
|
119 | 119 | |
|
|
120 | 120 | |
|
|
121 | 121 | [cReport] |
|
|
122 | 122 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
123 | 123 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
124 | 124 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
125 | 125 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
126 | 126 | FileNameFormat_Camera = "%d.%m.%Y-%H%M%S.png" |
|
|
127 | 127 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
128 | 128 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
129 | 129 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
130 | 130 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
131 | 131 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
132 | 132 | StandardTemplate.<size(s)> = "4" |
|
|
133 | 133 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
134 | 134 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
135 | 135 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
136 | 136 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
137 | 137 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
138 | 138 | StandardTemplate_Scripts.<size(s)> = "7" |
|
|
139 | 139 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
140 | 140 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
141 | 141 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
142 | 142 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
143 | 143 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
144 | 144 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
145 | 145 | StandardTemplate_Scripts 6 = "AktualisiereXYDiagrammHF" |
|
|
146 | 146 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
147 | 147 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
148 | 148 | HFTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\HFTemplate.xlsx" |
|
|
149 | 149 | CameraSubset.Left = "274" |
|
|
150 | 150 | CameraSubset.Top = "40" |
|
|
151 | 151 | CameraSubset.Right = "1616" |
|
|
152 | 152 | CameraSubset.Bottom = "1048" |
|
|
153 | 153 | |
|
|
154 | 154 | [cStateMessages] |
|
|
155 |
Info.<size(s)> = "3 |
|
|
|
155 | Info.<size(s)> = "32" | |
|
|
156 | 156 | Info 0 = "Not-Halt aktiviert!" |
|
|
157 | 157 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
158 | 158 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
159 | 159 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
160 | 160 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
161 | 161 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
162 | 162 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
163 | 163 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
164 | 164 | Info 8 = "Testdaten anlegen" |
|
|
165 | 165 | Info 9 = "Lernfahrten" |
|
|
166 | 166 | Info 10 = "Achsen werden initialisiert..." |
|
|
167 | 167 | Info 11 = "Referenzfahrt l�uft..." |
|
|
168 | 168 | Info 12 = "X-Achse wird referenziert..." |
|
|
169 | 169 | Info 13 = "Y-Achse wird referenziert..." |
|
|
170 | 170 | Info 14 = "Z-Achse wird referenziert..." |
|
|
171 | 171 | Info 15 = "Position wird angefahren..." |
|
|
172 | 172 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
173 | 173 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
174 | 174 | Info 18 = "Kamerabild wird gespeichert..." |
|
|
175 | 175 | Info 19 = "Testablauf" |
|
|
176 | 176 | Info 20 = "Test geladen" |
|
|
177 | 177 | Info 21 = "Laufender Test..." |
|
|
178 | 178 | Info 22 = "Verz�gerung l�uft..." |
|
|
179 | 179 | Info 23 = "Messung wird durchgef�hrt..." |
|
|
180 | 180 | Info 24 = "Lastwechsel wird ausgef�hrt..." |
|
|
181 | 181 | Info 25 = "Test erfolgreich abgeschlossen" |
|
|
182 | Info 26 = "Fehler aufgetreten!" | |
|
|
183 |
Info 27 = "Test |
|
|
|
184 | Info 28 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
185 | Info 29 = "Messergebnisse wurden exportiert" | |
|
|
186 | Result.<size(s)> = "30" | |
|
|
182 | Info 26 = "Test bestanden" | |
|
|
183 | Info 27 = "Test fehlgeschlagen" | |
|
|
184 | Info 28 = "Fehler aufgetreten!" | |
|
|
185 | Info 29 = "Test abgebrochen!" | |
|
|
186 | Info 30 = "Messergebnisse werden exportiert... Bitte warten" | |
|
|
187 | Info 31 = "Messergebnisse wurden exportiert" | |
|
|
188 | Result.<size(s)> = "32" | |
|
|
187 | 189 | Result 0 = "Not-Halt" |
|
|
188 | 190 | Result 1 = "" |
|
|
189 | 191 | Result 2 = "" |
|
|
190 | 192 | Result 3 = "" |
|
|
191 | 193 | Result 4 = "Einrichtbetrieb" |
|
|
192 | 194 | Result 5 = "Einrichtbetrieb" |
|
|
193 | 195 | Result 6 = "Einrichtbetrieb" |
|
|
194 | 196 | Result 7 = "" |
|
|
195 |
Result 8 = " |
|
|
|
197 | Result 8 = "" | |
|
|
196 | 198 | Result 9 = "Einrichtbetrieb" |
|
|
197 | 199 | Result 10 = "Einrichtbetrieb" |
|
|
198 | 200 | Result 11 = "Einrichtbetrieb" |
|
|
199 | 201 | Result 12 = "Einrichtbetrieb" |
|
|
200 | 202 | Result 13 = "Einrichtbetrieb" |
|
|
201 | 203 | Result 14 = "Einrichtbetrieb" |
|
|
202 | 204 | Result 15 = "Einrichtbetrieb" |
|
|
203 | 205 | Result 16 = "Einrichtbetrieb" |
|
|
204 | 206 | Result 17 = "Einrichtbetrieb" |
|
|
205 |
Result 18 = " |
|
|
|
206 |
Result 19 = " |
|
|
|
207 |
Result 20 = " |
|
|
|
207 | Result 18 = "" | |
|
|
208 | Result 19 = "" | |
|
|
209 | Result 20 = "" | |
|
|
208 | 210 | Result 21 = "Test l�uft" |
|
|
209 | 211 | Result 22 = "Test l�uft" |
|
|
210 | 212 | Result 23 = "Einrichtbetrieb" |
|
|
211 | 213 | Result 24 = "Test l�uft" |
|
|
212 |
Result 25 = " |
|
|
|
213 |
Result 26 = " |
|
|
|
214 |
Result 27 = " |
|
|
|
215 | Result 28 = "" | |
|
|
216 | Result 29 = "" | |
|
|
214 | Result 25 = "Fertig" | |
|
|
215 | Result 26 = "Bestanden" | |
|
|
216 | Result 27 = "Fehlgeschlagen" | |
|
|
217 | Result 28 = "Fehler" | |
|
|
218 | Result 29 = "Stop" | |
|
|
219 | Result 30 = "" | |
|
|
220 | Result 31 = "" | |
|
|
217 | 221 | |
|
|
218 | 222 | [cDialogMessages] |
|
|
219 | 223 | Messages.<size(s)> = "15" |
|
|
220 | 224 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
221 | 225 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
222 | 226 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
223 | 227 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
224 | 228 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
225 | 229 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
226 | 230 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
227 | 231 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
228 | 232 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
229 | 233 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
230 | 234 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
231 | 235 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." |
|
|
232 | 236 | Messages 12 = "Geben Sie einen Namen f�r die Limits ein" |
|
|
233 | 237 | Messages 13 = "W�hlen Sie die Parameter f�r die �berschreibung aller ausgew�hlten Positionen aus und geben Sie diese ein:" |
|
|
234 | 238 | Messages 14 = "Kein HF-Testschritt mit Radiusmessung und Testbestehenskriterien" |
|
|
235 | 239 | |
|
|
236 | 240 | [cCAQ] |
|
|
237 | 241 | Login = "Tester-Labor" |
|
|
238 | 242 | Pw = "Tester1" |
|
|
239 | 243 | AuthIDFile = "\\orion\G K S - Test1\CAQ.txt" |
|
|
240 | 244 | AuthID = "" |
|
|
241 | 245 | MAPNumber = 130 |
|
|
242 | 246 | LocationName = "GKS Montage HF-Tester" No newline at end of file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
General Comments 0
You need to be logged in to leave comments.
Login now