Show More
The requested changes are too big and content was truncated. Show full diff
|
|
1 | NO CONTENT: new file 10644 |
| @@ -1,207 +1,208 | |||
|
|
1 | 1 | [Tester] |
|
|
2 | 2 | TesterType = "EHF1" |
|
|
3 | 3 | TesterName = "Elektrischer Hochfrequenzmessplatz 1" |
|
|
4 | 4 | |
|
|
5 | 5 | [cHardware] |
|
|
6 | 6 | POS_AxesNames.<size(s)> = "3" |
|
|
7 | 7 | POS_AxesNames 0 = "X" |
|
|
8 | 8 | POS_AxesNames 1 = "Y" |
|
|
9 | 9 | POS_AxesNames 2 = "Z" |
|
|
10 | 10 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" |
|
|
11 | 11 | POS_Limits_Axis1 = "<size(s)=2> 0 210" |
|
|
12 | 12 | POS_Limits_Axis2 = "<size(s)=2> 0 242" |
|
|
13 | 13 | POS_Limits_Axis3 = "<size(s)=2> 0 111" |
|
|
14 | 14 | POS_AxesFlipped.<size(s)> = "3" |
|
|
15 | 15 | POS_AxesFlipped 0 = "True" |
|
|
16 | 16 | POS_AxesFlipped 1 = "True" |
|
|
17 | 17 | POS_AxesFlipped 2 = "False" |
|
|
18 | 18 | Pos_MaxVelocity = "300" |
|
|
19 | 19 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
20 | 20 | Pos_MaxAcceleration = "15000" |
|
|
21 | 21 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
22 | 22 | Pos_MaxJerk = "140000" |
|
|
23 | 23 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
24 | 24 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000" |
|
|
25 | 25 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
26 | 26 | ForceLimit_Axis3_Text 0 = "" |
|
|
27 | 27 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
28 | 28 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
29 | 29 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
30 | 30 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
31 | 31 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
32 | 32 | AO_ForceLimit = "Dev0/Ao0" |
|
|
33 | 33 | DI_E-Stop = "Dev0/AuxPort/Di0" |
|
|
34 | 34 | DI_Door = "Dev0/AuxPort/Di1" |
|
|
35 | 35 | DC_Wait = "100" |
|
|
36 | DC_Device_1 = "USB-6509" | |
|
|
37 | DC_Device_2 = "USB-6525" | |
|
|
36 | 38 | |
|
|
37 | 39 | [cEHF1] |
|
|
38 | 40 | POSConfig.IP = "10.1.2.1" |
|
|
39 | 41 | POSConfig.Port = "502" |
|
|
40 | 42 | DMMConfig.ResourceName = "COM1" |
|
|
41 | 43 | DMMConfig.Baudrate = "9600" |
|
|
42 | 44 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
43 | 45 | ChargeMeterConfig.ResourceName = "COM10" |
|
|
44 | 46 | ChargeMeterConfig.Baudrate = "9600" |
|
|
45 | 47 | NetworkAnalyser.Names.<size(s)> = "2" |
|
|
46 | 48 | NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)" |
|
|
47 | 49 | NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)" |
|
|
48 | 50 | NetworkAnalyser.ResourceNames.<size(s)> = "2" |
|
|
49 | 51 | NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR" |
|
|
50 | 52 | NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR" |
|
|
51 | 53 | NetworkAnalyser.StateFilesFolder.<size(s)> = "2" |
|
|
52 | 54 | NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\" |
|
|
53 | 55 | NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\" |
|
|
54 | 56 | NetworkAnalyser.TestResultFolder.<size(s)> = "2" |
|
|
55 | 57 | NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\" |
|
|
56 | 58 | NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\" |
|
|
57 | 59 | NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S" |
|
|
58 | 60 | NetworkAnalyser.ResultFolder.<size(s)> = "2" |
|
|
59 | 61 | NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\" |
|
|
60 | 62 | NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\" |
|
|
61 | 63 | NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF" |
|
|
62 | 64 | NetworkAnalyser.CommonMemory.<size(s)> = "2" |
|
|
63 | 65 | NetworkAnalyser.CommonMemory 0 = "Z:\" |
|
|
64 | 66 | NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\" |
|
|
65 | DC_Device = "USB-6509" | |
|
|
66 | 67 | |
|
|
67 | 68 | [cPathes] |
|
|
68 | 69 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
69 | 70 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
70 | 71 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
71 | 72 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
72 | 73 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
73 | 74 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
74 | 75 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
75 | 76 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
76 | 77 | |
|
|
77 | 78 | [cDefaultValues] |
|
|
78 | 79 | MovingParameter.Velocity = "20,000000" |
|
|
79 | 80 | MovingParameter.Acceleration = "50,000000" |
|
|
80 | 81 | MovingParameter.Jerk = "140000,000000" |
|
|
81 | 82 | ForceLimit_Z = "0" |
|
|
82 | 83 | Learning_Steps.X = "1,000000" |
|
|
83 | 84 | Learning_Steps.Y = "1,000000" |
|
|
84 | 85 | Learning_Steps.Z = "1,000000" |
|
|
85 | 86 | Learning_ZStopOffset = "-2,000000" |
|
|
86 | 87 | Learning_Measurements = "3" |
|
|
87 | 88 | Learning_NetworkAnalyser = "0" |
|
|
88 | 89 | TestNumber = "1" |
|
|
89 | 90 | Comment = "" |
|
|
90 | 91 | Matrix_WorkingStroke = "4,000000" |
|
|
91 | 92 | Matrix_Z- = "1,000000" |
|
|
92 | 93 | Matrix_Contacts = "1" |
|
|
93 | 94 | Matrix_XDelta = "1,000000" |
|
|
94 | 95 | Matrix_XSize = "2" |
|
|
95 | 96 | Matrix_YDelta = "1,000000" |
|
|
96 | 97 | Matrix_YSize = "2" |
|
|
97 | 98 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
98 | 99 | TestRun_LoopsNumber = "2" |
|
|
99 | 100 | TestRun_Delay = "100" |
|
|
100 | 101 | TestRun_-Z = "1" |
|
|
101 | 102 | TestRun_Stroke = "4" |
|
|
102 | 103 | TestRun_Time = "0" |
|
|
103 | 104 | TestRun_StrokesNumber = "10" |
|
|
104 | 105 | |
|
|
105 | 106 | |
|
|
106 | 107 | [cReport] |
|
|
107 | 108 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
108 | 109 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
109 | 110 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
110 | 111 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
111 | 112 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
112 | 113 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
113 | 114 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
114 | 115 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
115 | 116 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
116 | 117 | StandardTemplate.<size(s)> = "4" |
|
|
117 | 118 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
118 | 119 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
119 | 120 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
120 | 121 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
121 | 122 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
122 | 123 | StandardTemplate_Scripts.<size(s)> = "6" |
|
|
123 | 124 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
124 | 125 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
125 | 126 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
126 | 127 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
127 | 128 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
128 | 129 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
129 | 130 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
130 | 131 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
131 | 132 | |
|
|
132 | 133 | [cStateMessages] |
|
|
133 | 134 | Info.<size(s)> = "28" |
|
|
134 | 135 | Info 0 = "Not-Halt aktiviert!" |
|
|
135 | 136 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
136 | 137 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
137 | 138 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
138 | 139 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
139 | 140 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
140 | 141 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
141 | 142 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
142 | 143 | Info 8 = "Testdaten anlegen" |
|
|
143 | 144 | Info 9 = "Lernfahrten" |
|
|
144 | 145 | Info 10 = "Achsen werden initialisiert..." |
|
|
145 | 146 | Info 11 = "Referenzfahrt l�uft..." |
|
|
146 | 147 | Info 12 = "X-Achse wird referenziert..." |
|
|
147 | 148 | Info 13 = "Y-Achse wird referenziert..." |
|
|
148 | 149 | Info 14 = "Z-Achse wird referenziert..." |
|
|
149 | 150 | Info 15 = "Position wird angefahren..." |
|
|
150 | 151 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
151 | 152 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
152 | 153 | Info 18 = "Testablauf" |
|
|
153 | 154 | Info 19 = "Test geladen" |
|
|
154 | 155 | Info 20 = "Laufender Test..." |
|
|
155 | 156 | Info 21 = "Verz�gerung l�uft..." |
|
|
156 | 157 | Info 22 = "Messung wird durchgef�hrt..." |
|
|
157 | 158 | Info 23 = "Lastwechsel wird ausgef�hrt..." |
|
|
158 | 159 | Info 24 = "Test erfolgreich abgeschlossen" |
|
|
159 | 160 | Info 25 = "Fehler aufgetreten!" |
|
|
160 | 161 | Info 26 = "Test abgebrochen!" |
|
|
161 | 162 | Info 27 = "Testprotokoll wird erstellt... Bitte warten" |
|
|
162 | 163 | Info 28 = "Testprotokoll erstellt" |
|
|
163 | 164 | Result.<size(s)> = "29" |
|
|
164 | 165 | Result 0 = "Not-Halt" |
|
|
165 | 166 | Result 1 = "" |
|
|
166 | 167 | Result 2 = "" |
|
|
167 | 168 | Result 3 = "" |
|
|
168 | 169 | Result 4 = "Einrichtbetrieb" |
|
|
169 | 170 | Result 5 = "Einrichtbetrieb" |
|
|
170 | 171 | Result 6 = "Einrichtbetrieb" |
|
|
171 | 172 | Result 7 = "" |
|
|
172 | 173 | Result 8 = "Bereit" |
|
|
173 | 174 | Result 9 = "Einrichtbetrieb" |
|
|
174 | 175 | Result 10 = "Einrichtbetrieb" |
|
|
175 | 176 | Result 11 = "Einrichtbetrieb" |
|
|
176 | 177 | Result 12 = "Einrichtbetrieb" |
|
|
177 | 178 | Result 13 = "Einrichtbetrieb" |
|
|
178 | 179 | Result 14 = "Einrichtbetrieb" |
|
|
179 | 180 | Result 15 = "Einrichtbetrieb" |
|
|
180 | 181 | Result 16 = "Einrichtbetrieb" |
|
|
181 | 182 | Result 17 = "Einrichtbetrieb" |
|
|
182 | 183 | Result 18 = "Bereit" |
|
|
183 | 184 | Result 19 = "Bereit" |
|
|
184 | 185 | Result 20 = "Test l�uft" |
|
|
185 | 186 | Result 21 = "Test l�uft" |
|
|
186 | 187 | Result 22 = "Einrichtbetrieb" |
|
|
187 | 188 | Result 23 = "Test l�uft" |
|
|
188 | 189 | Result 24 = "Test fertig" |
|
|
189 | 190 | Result 25 = "Fehler" |
|
|
190 | 191 | Result 26 = "Test Stop" |
|
|
191 | 192 | Result 27 = "" |
|
|
192 | 193 | Result 28 = "" |
|
|
193 | 194 | |
|
|
194 | 195 | [cDialogMessages] |
|
|
195 | 196 | Messages.<size(s)> = "12" |
|
|
196 | 197 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
197 | 198 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
198 | 199 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
199 | 200 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
200 | 201 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
201 | 202 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
202 | 203 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
203 | 204 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
204 | 205 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
205 | 206 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
206 | 207 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
207 | 208 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file |
| @@ -1,207 +1,208 | |||
|
|
1 | 1 | [Tester] |
|
|
2 | 2 | TesterType = "EHF1" |
|
|
3 | 3 | TesterName = "Elektrischer Hochfrequenzmessplatz 1" |
|
|
4 | 4 | |
|
|
5 | 5 | [cHardware] |
|
|
6 | 6 | POS_AxesNames.<size(s)> = "3" |
|
|
7 | 7 | POS_AxesNames 0 = "X" |
|
|
8 | 8 | POS_AxesNames 1 = "Y" |
|
|
9 | 9 | POS_AxesNames 2 = "Z" |
|
|
10 | 10 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" |
|
|
11 | 11 | POS_Limits_Axis1 = "<size(s)=2> 0 210" |
|
|
12 | 12 | POS_Limits_Axis2 = "<size(s)=2> 0 242" |
|
|
13 | 13 | POS_Limits_Axis3 = "<size(s)=2> 0 111" |
|
|
14 | 14 | POS_AxesFlipped.<size(s)> = "3" |
|
|
15 | 15 | POS_AxesFlipped 0 = "True" |
|
|
16 | 16 | POS_AxesFlipped 1 = "True" |
|
|
17 | 17 | POS_AxesFlipped 2 = "False" |
|
|
18 | 18 | Pos_MaxVelocity = "300" |
|
|
19 | 19 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
20 | 20 | Pos_MaxAcceleration = "15000" |
|
|
21 | 21 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
22 | 22 | Pos_MaxJerk = "140000" |
|
|
23 | 23 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
24 | 24 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000" |
|
|
25 | 25 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
26 | 26 | ForceLimit_Axis3_Text 0 = "" |
|
|
27 | 27 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
28 | 28 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
29 | 29 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
30 | 30 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
31 | 31 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
32 | 32 | AO_ForceLimit = "Dev0/Ao0" |
|
|
33 | 33 | DI_E-Stop = "Dev0/AuxPort/Di0" |
|
|
34 | 34 | DI_Door = "Dev0/AuxPort/Di1" |
|
|
35 | 35 | DC_Wait = "100" |
|
|
36 | DC_Device_1 = "USB-6509" | |
|
|
37 | DC_Device_2 = "USB-6525" | |
|
|
36 | 38 | |
|
|
37 | 39 | [cEHF1] |
|
|
38 | 40 | POSConfig.IP = "10.1.2.1" |
|
|
39 | 41 | POSConfig.Port = "502" |
|
|
40 | 42 | DMMConfig.ResourceName = "COM1" |
|
|
41 | 43 | DMMConfig.Baudrate = "9600" |
|
|
42 | 44 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
43 | 45 | ChargeMeterConfig.ResourceName = "COM10" |
|
|
44 | 46 | ChargeMeterConfig.Baudrate = "9600" |
|
|
45 | 47 | NetworkAnalyser.Names.<size(s)> = "2" |
|
|
46 | 48 | NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)" |
|
|
47 | 49 | NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)" |
|
|
48 | 50 | NetworkAnalyser.ResourceNames.<size(s)> = "2" |
|
|
49 | 51 | NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR" |
|
|
50 | 52 | NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR" |
|
|
51 | 53 | NetworkAnalyser.StateFilesFolder.<size(s)> = "2" |
|
|
52 | 54 | NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\" |
|
|
53 | 55 | NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\" |
|
|
54 | 56 | NetworkAnalyser.TestResultFolder.<size(s)> = "2" |
|
|
55 | 57 | NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\" |
|
|
56 | 58 | NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\" |
|
|
57 | 59 | NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S" |
|
|
58 | 60 | NetworkAnalyser.ResultFolder.<size(s)> = "2" |
|
|
59 | 61 | NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\" |
|
|
60 | 62 | NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\" |
|
|
61 | 63 | NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF" |
|
|
62 | 64 | NetworkAnalyser.CommonMemory.<size(s)> = "2" |
|
|
63 | 65 | NetworkAnalyser.CommonMemory 0 = "Z:\" |
|
|
64 | 66 | NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\" |
|
|
65 | DC_Device = "USB-6509" | |
|
|
66 | 67 | |
|
|
67 | 68 | [cPathes] |
|
|
68 | 69 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
69 | 70 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
70 | 71 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
71 | 72 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
72 | 73 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
73 | 74 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
74 | 75 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
75 | 76 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
76 | 77 | |
|
|
77 | 78 | [cDefaultValues] |
|
|
78 | 79 | MovingParameter.Velocity = "20,000000" |
|
|
79 | 80 | MovingParameter.Acceleration = "50,000000" |
|
|
80 | 81 | MovingParameter.Jerk = "140000,000000" |
|
|
81 | 82 | ForceLimit_Z = "0" |
|
|
82 | 83 | Learning_Steps.X = "1,000000" |
|
|
83 | 84 | Learning_Steps.Y = "1,000000" |
|
|
84 | 85 | Learning_Steps.Z = "1,000000" |
|
|
85 | 86 | Learning_ZStopOffset = "-2,000000" |
|
|
86 | 87 | Learning_Measurements = "3" |
|
|
87 | 88 | Learning_NetworkAnalyser = "0" |
|
|
88 | 89 | TestNumber = "1" |
|
|
89 | 90 | Comment = "" |
|
|
90 | 91 | Matrix_WorkingStroke = "4,000000" |
|
|
91 | 92 | Matrix_Z- = "1,000000" |
|
|
92 | 93 | Matrix_Contacts = "1" |
|
|
93 | 94 | Matrix_XDelta = "1,000000" |
|
|
94 | 95 | Matrix_XSize = "2" |
|
|
95 | 96 | Matrix_YDelta = "1,000000" |
|
|
96 | 97 | Matrix_YSize = "2" |
|
|
97 | 98 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
98 | 99 | TestRun_LoopsNumber = "2" |
|
|
99 | 100 | TestRun_Delay = "100" |
|
|
100 | 101 | TestRun_-Z = "1" |
|
|
101 | 102 | TestRun_Stroke = "4" |
|
|
102 | 103 | TestRun_Time = "0" |
|
|
103 | 104 | TestRun_StrokesNumber = "10" |
|
|
104 | 105 | |
|
|
105 | 106 | |
|
|
106 | 107 | [cReport] |
|
|
107 | 108 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
108 | 109 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
109 | 110 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
110 | 111 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
111 | 112 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
112 | 113 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
113 | 114 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
114 | 115 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
115 | 116 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
116 | 117 | StandardTemplate.<size(s)> = "4" |
|
|
117 | 118 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
118 | 119 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
119 | 120 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
120 | 121 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
121 | 122 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
122 | 123 | StandardTemplate_Scripts.<size(s)> = "6" |
|
|
123 | 124 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
124 | 125 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
125 | 126 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
126 | 127 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
127 | 128 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
128 | 129 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
129 | 130 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
130 | 131 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
131 | 132 | |
|
|
132 | 133 | [cStateMessages] |
|
|
133 | 134 | Info.<size(s)> = "28" |
|
|
134 | 135 | Info 0 = "Not-Halt aktiviert!" |
|
|
135 | 136 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
136 | 137 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
137 | 138 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
138 | 139 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
139 | 140 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
140 | 141 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
141 | 142 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
142 | 143 | Info 8 = "Testdaten anlegen" |
|
|
143 | 144 | Info 9 = "Lernfahrten" |
|
|
144 | 145 | Info 10 = "Achsen werden initialisiert..." |
|
|
145 | 146 | Info 11 = "Referenzfahrt l�uft..." |
|
|
146 | 147 | Info 12 = "X-Achse wird referenziert..." |
|
|
147 | 148 | Info 13 = "Y-Achse wird referenziert..." |
|
|
148 | 149 | Info 14 = "Z-Achse wird referenziert..." |
|
|
149 | 150 | Info 15 = "Position wird angefahren..." |
|
|
150 | 151 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
151 | 152 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
152 | 153 | Info 18 = "Testablauf" |
|
|
153 | 154 | Info 19 = "Test geladen" |
|
|
154 | 155 | Info 20 = "Laufender Test..." |
|
|
155 | 156 | Info 21 = "Verz�gerung l�uft..." |
|
|
156 | 157 | Info 22 = "Messung wird durchgef�hrt..." |
|
|
157 | 158 | Info 23 = "Lastwechsel wird ausgef�hrt..." |
|
|
158 | 159 | Info 24 = "Test erfolgreich abgeschlossen" |
|
|
159 | 160 | Info 25 = "Fehler aufgetreten!" |
|
|
160 | 161 | Info 26 = "Test abgebrochen!" |
|
|
161 | 162 | Info 27 = "Testprotokoll wird erstellt... Bitte warten" |
|
|
162 | 163 | Info 28 = "Testprotokoll erstellt" |
|
|
163 | 164 | Result.<size(s)> = "29" |
|
|
164 | 165 | Result 0 = "Not-Halt" |
|
|
165 | 166 | Result 1 = "" |
|
|
166 | 167 | Result 2 = "" |
|
|
167 | 168 | Result 3 = "" |
|
|
168 | 169 | Result 4 = "Einrichtbetrieb" |
|
|
169 | 170 | Result 5 = "Einrichtbetrieb" |
|
|
170 | 171 | Result 6 = "Einrichtbetrieb" |
|
|
171 | 172 | Result 7 = "" |
|
|
172 | 173 | Result 8 = "Bereit" |
|
|
173 | 174 | Result 9 = "Einrichtbetrieb" |
|
|
174 | 175 | Result 10 = "Einrichtbetrieb" |
|
|
175 | 176 | Result 11 = "Einrichtbetrieb" |
|
|
176 | 177 | Result 12 = "Einrichtbetrieb" |
|
|
177 | 178 | Result 13 = "Einrichtbetrieb" |
|
|
178 | 179 | Result 14 = "Einrichtbetrieb" |
|
|
179 | 180 | Result 15 = "Einrichtbetrieb" |
|
|
180 | 181 | Result 16 = "Einrichtbetrieb" |
|
|
181 | 182 | Result 17 = "Einrichtbetrieb" |
|
|
182 | 183 | Result 18 = "Bereit" |
|
|
183 | 184 | Result 19 = "Bereit" |
|
|
184 | 185 | Result 20 = "Test l�uft" |
|
|
185 | 186 | Result 21 = "Test l�uft" |
|
|
186 | 187 | Result 22 = "Einrichtbetrieb" |
|
|
187 | 188 | Result 23 = "Test l�uft" |
|
|
188 | 189 | Result 24 = "Test fertig" |
|
|
189 | 190 | Result 25 = "Fehler" |
|
|
190 | 191 | Result 26 = "Test Stop" |
|
|
191 | 192 | Result 27 = "" |
|
|
192 | 193 | Result 28 = "" |
|
|
193 | 194 | |
|
|
194 | 195 | [cDialogMessages] |
|
|
195 | 196 | Messages.<size(s)> = "12" |
|
|
196 | 197 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
197 | 198 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
198 | 199 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
199 | 200 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
200 | 201 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
201 | 202 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
202 | 203 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
203 | 204 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
204 | 205 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
205 | 206 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
206 | 207 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
207 | 208 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file |
| @@ -1,190 +1,191 | |||
|
|
1 | 1 | [Tester] |
|
|
2 | 2 | TesterType = "SCP" |
|
|
3 | 3 | TesterName = "SCP-Tester" |
|
|
4 | 4 | |
|
|
5 | 5 | [cHardware] |
|
|
6 | 6 | POS_AxesNames.<size(s)> = "3" |
|
|
7 | 7 | POS_AxesNames 0 = "X" |
|
|
8 | 8 | POS_AxesNames 1 = "Y" |
|
|
9 | 9 | POS_AxesNames 2 = "Z" |
|
|
10 | 10 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000" |
|
|
11 | 11 | POS_Limits_Axis1 = "<size(s)=2> 0 325" |
|
|
12 | 12 | POS_Limits_Axis2 = "<size(s)=2> 0 350" |
|
|
13 | 13 | POS_Limits_Axis3 = "<size(s)=2> -44 0" |
|
|
14 | 14 | POS_AxesFlipped.<size(s)> = "3" |
|
|
15 | 15 | POS_AxesFlipped 0 = "True" |
|
|
16 | 16 | POS_AxesFlipped 1 = "True" |
|
|
17 | 17 | POS_AxesFlipped 2 = "False" |
|
|
18 | 18 | Pos_MaxVelocity = "600" |
|
|
19 | 19 | Pos_MaxVelocityUnblockedDoor = "20" |
|
|
20 | 20 | Pos_MaxAcceleration = "40000" |
|
|
21 | 21 | Pos_MaxAccelerationUnblockedDoor = "20" |
|
|
22 | 22 | Pos_MaxJerk = "0" |
|
|
23 | 23 | Pos_MaxJerkUnblockedDoor = "14000" |
|
|
24 | 24 | ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000" |
|
|
25 | 25 | ForceLimit_Axis3_Text.<size(s)> = "5" |
|
|
26 | 26 | ForceLimit_Axis3_Text 0 = "" |
|
|
27 | 27 | ForceLimit_Axis3_Text 1 = "�30 N" |
|
|
28 | 28 | ForceLimit_Axis3_Text 2 = "�40 N" |
|
|
29 | 29 | ForceLimit_Axis3_Text 3 = "�50 N" |
|
|
30 | 30 | ForceLimit_Axis3_Text 4 = "�60 N" |
|
|
31 | 31 | ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000" |
|
|
32 | 32 | AO_ForceLimit = "Dev0/Ao0" |
|
|
33 | 33 | DI_E-Stop = "Dev2/port0/line0" |
|
|
34 | 34 | DI_Door = "Dev2/port0/line1" |
|
|
35 | 35 | DC_Wait = "100" |
|
|
36 | DC_Device_1 = "USB-6509" | |
|
|
37 | DC_Device_2 = "USB-6525" | |
|
|
36 | 38 | |
|
|
37 | 39 | [cSCP] |
|
|
38 | 40 | POSConfig.IP = "10.1.2.1" |
|
|
39 | 41 | POSConfig.Port = "502" |
|
|
40 | 42 | DMMConfig.ResourceName = "COM1" |
|
|
41 | 43 | DMMConfig.Baudrate = "9600" |
|
|
42 | 44 | DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110" |
|
|
43 | 45 | ChargeMeterConfig.ResourceName = "COM2" |
|
|
44 | 46 | ChargeMeterConfig.Baudrate = "9600" |
|
|
45 | DC_Device = "USB-6509" | |
|
|
46 | 47 | DOs.<size(s)> = "2" |
|
|
47 | 48 | DOs 0 = "Dev2/port4/line0" |
|
|
48 | 49 | DOs 1 = "Dev2/port4/line1" |
|
|
49 | 50 | |
|
|
50 | 51 | [cPathes] |
|
|
51 | 52 | pUser = "C:\Work\PositioningSystem\support\User.txt" |
|
|
52 | 53 | pResultsFolder = "C:\Work\PositioningSystem\support\ResultData" |
|
|
53 | 54 | pGraphs = "C:\Work\PositioningSystem\support\Temp" |
|
|
54 | 55 | pExcelReports = "C:\Work\PositioningSystem\support\Temp" |
|
|
55 | 56 | pTestRun = "C:\Work\PositioningSystem\support\TestRuns" |
|
|
56 | 57 | pMatrix = "C:\Work\PositioningSystem\support\Matrixes" |
|
|
57 | 58 | pDC = "C:\Work\PositioningSystem\support\DC-Configurations" |
|
|
58 | 59 | pNote = "C:\Work\PositioningSystem\support\Note.txt" |
|
|
59 | 60 | |
|
|
60 | 61 | [cDefaultValues] |
|
|
61 | 62 | MovingParameter.Velocity = "20,000000" |
|
|
62 | 63 | MovingParameter.Acceleration = "20,000000" |
|
|
63 | 64 | MovingParameter.Jerk = "0,000000" |
|
|
64 | 65 | ForceLimit_Z = "1" |
|
|
65 | 66 | Learning_Steps.X = "1,000000" |
|
|
66 | 67 | Learning_Steps.Y = "1,000000" |
|
|
67 | 68 | Learning_Steps.Z = "1,000000" |
|
|
68 | 69 | Learning_ZStopOffset = "-2,000000" |
|
|
69 | 70 | Learning_Measurements = "3" |
|
|
70 | 71 | Learning_NetworkAnalyser = "0" |
|
|
71 | 72 | TestNumber = "1" |
|
|
72 | 73 | Comment = "" |
|
|
73 | 74 | Matrix_WorkingStroke = "4,000000" |
|
|
74 | 75 | Matrix_Z- = "1,000000" |
|
|
75 | 76 | Matrix_Contacts = "1" |
|
|
76 | 77 | Matrix_XDelta = "1,000000" |
|
|
77 | 78 | Matrix_XSize = "2" |
|
|
78 | 79 | Matrix_YDelta = "1,000000" |
|
|
79 | 80 | Matrix_YSize = "2" |
|
|
80 | 81 | Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230" |
|
|
81 | 82 | TestRun_LoopsNumber = "2" |
|
|
82 | 83 | TestRun_Delay = "100" |
|
|
83 | 84 | TestRun_-Z = "1" |
|
|
84 | 85 | TestRun_Stroke = "4" |
|
|
85 | 86 | TestRun_Time = "0" |
|
|
86 | 87 | TestRun_StrokesNumber = "10" |
|
|
87 | 88 | |
|
|
88 | 89 | |
|
|
89 | 90 | [cReport] |
|
|
90 | 91 | FileNameFormat = "%s_TestProtocol.txt" |
|
|
91 | 92 | FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv" |
|
|
92 | 93 | FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv" |
|
|
93 | 94 | FileNameFormat_Position = "%d.%m.%Y-%H%M%S_Position.csv" |
|
|
94 | 95 | ReportNameFormat = "%s_TestReport.xlsx" |
|
|
95 | 96 | ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx" |
|
|
96 | 97 | ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx" |
|
|
97 | 98 | ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx" |
|
|
98 | 99 | ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx" |
|
|
99 | 100 | StandardTemplate.<size(s)> = "4" |
|
|
100 | 101 | StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
101 | 102 | StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx" |
|
|
102 | 103 | StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx" |
|
|
103 | 104 | StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx" |
|
|
104 | 105 | StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas" |
|
|
105 | 106 | StandardTemplate_Scripts.<size(s)> = "6" |
|
|
106 | 107 | StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand" |
|
|
107 | 108 | StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft" |
|
|
108 | 109 | StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand" |
|
|
109 | 110 | StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft" |
|
|
110 | 111 | StandardTemplate_Scripts 4 = "AktualisiereXYDiagrammInkrementWiderstandPosition" |
|
|
111 | 112 | StandardTemplate_Scripts 5 = "AktualisiereXYDiagrammInkrementKraftPosition" |
|
|
112 | 113 | DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx" |
|
|
113 | 114 | PositionTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\PositionTemplate.xlsx" |
|
|
114 | 115 | |
|
|
115 | 116 | [cStateMessages] |
|
|
116 | 117 | Info.<size(s)> = "28" |
|
|
117 | 118 | Info 0 = "Not-Halt aktiviert!" |
|
|
118 | 119 | Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich" |
|
|
119 | 120 | Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich" |
|
|
120 | 121 | Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..." |
|
|
121 | 122 | Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..." |
|
|
122 | 123 | Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..." |
|
|
123 | 124 | Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..." |
|
|
124 | 125 | Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" |
|
|
125 | 126 | Info 8 = "Testdaten anlegen" |
|
|
126 | 127 | Info 9 = "Lernfahrten" |
|
|
127 | 128 | Info 10 = "Achsen werden initialisiert..." |
|
|
128 | 129 | Info 11 = "Referenzfahrt l�uft..." |
|
|
129 | 130 | Info 12 = "X-Achse wird referenziert..." |
|
|
130 | 131 | Info 13 = "Y-Achse wird referenziert..." |
|
|
131 | 132 | Info 14 = "Z-Achse wird referenziert..." |
|
|
132 | 133 | Info 15 = "Position wird angefahren..." |
|
|
133 | 134 | Info 16 = "Kraftmessung wird durchgef�hrt..." |
|
|
134 | 135 | Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..." |
|
|
135 | 136 | Info 18 = "Testablauf" |
|
|
136 | 137 | Info 19 = "Test geladen" |
|
|
137 | 138 | Info 20 = "Laufender Test..." |
|
|
138 | 139 | Info 21 = "Verz�gerung l�uft..." |
|
|
139 | 140 | Info 22 = "Messung wird durchgef�hrt..." |
|
|
140 | 141 | Info 23 = "Lastwechsel wird ausgef�hrt..." |
|
|
141 | 142 | Info 24 = "Test erfolgreich abgeschlossen" |
|
|
142 | 143 | Info 25 = "Fehler aufgetreten!" |
|
|
143 | 144 | Info 26 = "Test abgebrochen!" |
|
|
144 | 145 | Info 27 = "Testprotokoll wird erstellt... Bitte warten" |
|
|
145 | 146 | Info 28 = "Testprotokoll erstellt" |
|
|
146 | 147 | Result.<size(s)> = "29" |
|
|
147 | 148 | Result 0 = "Not-Halt" |
|
|
148 | 149 | Result 1 = "" |
|
|
149 | 150 | Result 2 = "" |
|
|
150 | 151 | Result 3 = "" |
|
|
151 | 152 | Result 4 = "Einrichtbetrieb" |
|
|
152 | 153 | Result 5 = "Einrichtbetrieb" |
|
|
153 | 154 | Result 6 = "Einrichtbetrieb" |
|
|
154 | 155 | Result 7 = "" |
|
|
155 | 156 | Result 8 = "Bereit" |
|
|
156 | 157 | Result 9 = "Einrichtbetrieb" |
|
|
157 | 158 | Result 10 = "Einrichtbetrieb" |
|
|
158 | 159 | Result 11 = "Einrichtbetrieb" |
|
|
159 | 160 | Result 12 = "Einrichtbetrieb" |
|
|
160 | 161 | Result 13 = "Einrichtbetrieb" |
|
|
161 | 162 | Result 14 = "Einrichtbetrieb" |
|
|
162 | 163 | Result 15 = "Einrichtbetrieb" |
|
|
163 | 164 | Result 16 = "Einrichtbetrieb" |
|
|
164 | 165 | Result 17 = "Einrichtbetrieb" |
|
|
165 | 166 | Result 18 = "Bereit" |
|
|
166 | 167 | Result 19 = "Bereit" |
|
|
167 | 168 | Result 20 = "Test l�uft" |
|
|
168 | 169 | Result 21 = "Test l�uft" |
|
|
169 | 170 | Result 22 = "Einrichtbetrieb" |
|
|
170 | 171 | Result 23 = "Test l�uft" |
|
|
171 | 172 | Result 24 = "Test fertig" |
|
|
172 | 173 | Result 25 = "Fehler" |
|
|
173 | 174 | Result 26 = "Test Stop" |
|
|
174 | 175 | Result 27 = "" |
|
|
175 | 176 | Result 28 = "" |
|
|
176 | 177 | |
|
|
177 | 178 | [cDialogMessages] |
|
|
178 | 179 | Messages.<size(s)> = "12" |
|
|
179 | 180 | Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" |
|
|
180 | 181 | Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" |
|
|
181 | 182 | Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
182 | 183 | Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus" |
|
|
183 | 184 | Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein" |
|
|
184 | 185 | Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..." |
|
|
185 | 186 | Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus" |
|
|
186 | 187 | Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein" |
|
|
187 | 188 | Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus" |
|
|
188 | 189 | Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein" |
|
|
189 | 190 | Messages 10 = "W�hlen Sie eine Vorlage aus:" |
|
|
190 | 191 | Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file |
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
|
|
1 | NO CONTENT: modified file | |
| The requested commit or file is too big and content was truncated. Show full diff | |||
General Comments 0
You need to be logged in to leave comments.
Login now