##// END OF EJS Templates
Projects » PositioningSystem
RSS
- SCP tested
LabVIEW -
r15:16
parent child Browse files
Show More

The requested changes are too big and content was truncated. Show full diff

Show file before | Show file after | Hide comments
@@ -1,216 +1,185
1 1 [Tester]
2 2 TesterType = "SCP"
3 3 TesterName = "SCP-Tester"
4 4
5 5 [cHardware]
6 6 POS_AxesNames.<size(s)> = "3"
7 7 POS_AxesNames 0 = "X"
8 8 POS_AxesNames 1 = "Y"
9 9 POS_AxesNames 2 = "Z"
10 10 POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000"
11 11 POS_Limits_Axis1 = "<size(s)=2> 0 325"
12 12 POS_Limits_Axis2 = "<size(s)=2> 0 350"
13 13 POS_Limits_Axis3 = "<size(s)=2> -44 0"
14 14 POS_AxesFlipped.<size(s)> = "3"
15 15 POS_AxesFlipped 0 = "True"
16 16 POS_AxesFlipped 1 = "True"
17 17 POS_AxesFlipped 2 = "False"
18 18 Pos_MaxVelocity = "600"
19 19 Pos_MaxVelocityUnblockedDoor = "20"
20 20 Pos_MaxAcceleration = "40000"
21 21 Pos_MaxAccelerationUnblockedDoor = "20"
22 22 Pos_MaxJerk = "0"
23 23 Pos_MaxJerkUnblockedDoor = "14000"
24 24 ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000"
25 25 ForceLimit_Axis3_Text.<size(s)> = "5"
26 26 ForceLimit_Axis3_Text 0 = ""
27 27 ForceLimit_Axis3_Text 1 = "�30 N"
28 28 ForceLimit_Axis3_Text 2 = "�40 N"
29 29 ForceLimit_Axis3_Text 3 = "�50 N"
30 30 ForceLimit_Axis3_Text 4 = "�60 N"
31 31 ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
32 32 AO_ForceLimit = "Dev0/Ao0"
33 33 DI_E-Stop = "Dev2/port0/line0"
34 34 DI_Door = "Dev2/port0/line1"
35 35 DC_Wait = "100"
36 36
37 [cEHF1]
38 POSConfig.IP = "10.1.2.1"
39 POSConfig.Port = "502"
40 DMMConfig.ResourceName = "COM1"
41 DMMConfig.Baudrate = "9600"
42 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
43 ChargeMeterConfig.ResourceName = "COM10"
44 ChargeMeterConfig.Baudrate = "9600"
45 NetworkAnalyser.Names.<size(s)> = "2"
46 NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
47 NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
48 NetworkAnalyser.ResourceNames.<size(s)> = "2"
49 NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
50 NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
51 NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
52 NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
53 NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
54 NetworkAnalyser.TestResultFolder.<size(s)> = "2"
55 NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
56 NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
57 NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
58 NetworkAnalyser.ResultFolder.<size(s)> = "2"
59 NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
60 NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
61 NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
62 NetworkAnalyser.CommonMemory.<size(s)> = "2"
63 NetworkAnalyser.CommonMemory 0 = "Z:\"
64 NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
65 DC_Device = "USB-6509"
66
67 37 [cSCP]
68 38 POSConfig.IP = "10.1.2.1"
69 39 POSConfig.Port = "502"
70 40 DMMConfig.ResourceName = "COM1"
71 41 DMMConfig.Baudrate = "9600"
72 42 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
73 43 ChargeMeterConfig.ResourceName = "COM2"
74 44 ChargeMeterConfig.Baudrate = "9600"
75 45 DC_Device = "USB-6509"
76 46 DOs.<size(s)> = "2"
77 47 DOs 0 = "Dev2/port4/line0"
78 DOs 1 = "Dev2/port4/line1
79 "
48 DOs 1 = "Dev2/port4/line1"
80 49
81 50 [cPathes]
82 51 pUser = "C:\Work\PositioningSystem\support\User.txt"
83 52 pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
84 53 pGraphs = "C:\Work\PositioningSystem\support\Temp"
85 54 pExcelReports = "C:\Work\PositioningSystem\support\Temp"
86 55 pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
87 56 pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
88 57 pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
89 58
90 59 [cDefaultValues]
91 60 MovingParameter.Velocity = "20,000000"
92 61 MovingParameter.Acceleration = "20,000000"
93 62 MovingParameter.Jerk = "0,000000"
94 63 ForceLimit_Z = "1"
95 64 Learning_Steps.X = "1,000000"
96 65 Learning_Steps.Y = "1,000000"
97 66 Learning_Steps.Z = "1,000000"
98 67 Learning_ZStopOffset = "-2,000000"
99 68 Learning_Measurements = "3"
100 69 Learning_NetworkAnalyser = "0"
101 70 TestNumber = "1"
102 71 Comment = ""
103 72 Matrix_WorkingStroke = "4,000000"
104 73 Matrix_Z- = "1,000000"
105 74 Matrix_Contacts = "1"
106 75 Matrix_XDelta = "1,000000"
107 76 Matrix_XSize = "2"
108 77 Matrix_YDelta = "1,000000"
109 78 Matrix_YSize = "2"
110 79 Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
111 80 TestRun_LoopsNumber = "2"
112 81 TestRun_Delay = "100"
113 82 TestRun_-Z = "1"
114 83 TestRun_Stroke = "4"
115 84 TestRun_Time = "0"
116 85 TestRun_StrokesNumber = "10"
117 86
118 87
119 88 [cReport]
120 89 FileNameFormat = "%s_TestProtocol.txt"
121 90 FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
122 91 FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
123 92 ReportNameFormat = "%s_TestReport.xlsx"
124 93 ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
125 94 ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
126 95 ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
127 96 ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
128 97 StandardTemplate.<size(s)> = "4"
129 98 StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
130 99 StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
131 100 StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
132 101 StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
133 102 StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
134 103 StandardTemplate_Scripts.<size(s)> = "4"
135 104 StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
136 105 StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
137 106 StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
138 107 StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
139 108 DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
140 109
141 110 [cStateMessages]
142 111 Info.<size(s)> = "28"
143 112 Info 0 = "Not-Halt aktiviert!"
144 113 Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
145 114 Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
146 115 Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
147 116 Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
148 117 Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
149 118 Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
150 119 Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
151 120 Info 8 = "Testdaten anlegen"
152 121 Info 9 = "Lernfahrten"
153 122 Info 10 = "Achsen werden initialisiert..."
154 123 Info 11 = "Referenzfahrt l�uft..."
155 124 Info 12 = "X-Achse wird referenziert..."
156 125 Info 13 = "Y-Achse wird referenziert..."
157 126 Info 14 = "Z-Achse wird referenziert..."
158 127 Info 15 = "Position wird angefahren..."
159 128 Info 16 = "Kraftmessung wird durchgef�hrt..."
160 129 Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
161 130 Info 18 = "Testablauf"
162 131 Info 19 = "Test geladen"
163 132 Info 20 = "Laufender Test..."
164 133 Info 21 = "Verz�gerung l�uft..."
165 134 Info 22 = "Messung wird durchgef�hrt..."
166 135 Info 23 = "Lastwechsel wird ausgef�hrt..."
167 136 Info 24 = "Test erfolgreich abgeschlossen"
168 137 Info 25 = "Fehler aufgetreten!"
169 138 Info 26 = "Test abgebrochen!"
170 139 Info 27 = "Testprotokoll wird erstellt... Bitte warten"
171 140 Info 28 = "Testprotokoll erstellt"
172 141 Result.<size(s)> = "29"
173 142 Result 0 = "Not-Halt"
174 143 Result 1 = ""
175 144 Result 2 = ""
176 145 Result 3 = ""
177 146 Result 4 = "Einrichtbetrieb"
178 147 Result 5 = "Einrichtbetrieb"
179 148 Result 6 = "Einrichtbetrieb"
180 149 Result 7 = ""
181 150 Result 8 = "Bereit"
182 151 Result 9 = "Einrichtbetrieb"
183 152 Result 10 = "Einrichtbetrieb"
184 153 Result 11 = "Einrichtbetrieb"
185 154 Result 12 = "Einrichtbetrieb"
186 155 Result 13 = "Einrichtbetrieb"
187 156 Result 14 = "Einrichtbetrieb"
188 157 Result 15 = "Einrichtbetrieb"
189 158 Result 16 = "Einrichtbetrieb"
190 159 Result 17 = "Einrichtbetrieb"
191 160 Result 18 = "Bereit"
192 161 Result 19 = "Bereit"
193 162 Result 20 = "Test l�uft"
194 163 Result 21 = "Test l�uft"
195 164 Result 22 = "Einrichtbetrieb"
196 165 Result 23 = "Test l�uft"
197 166 Result 24 = "Test fertig"
198 167 Result 25 = "Fehler"
199 168 Result 26 = "Test Stop"
200 169 Result 27 = ""
201 170 Result 28 = ""
202 171
203 172 [cDialogMessages]
204 173 Messages.<size(s)> = "12"
205 174 Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
206 175 Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
207 176 Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
208 177 Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
209 178 Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
210 179 Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
211 180 Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
212 181 Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
213 182 Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
214 183 Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
215 184 Messages 10 = "W�hlen Sie eine Vorlage aus:"
216 185 Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file
Show file before | Show file after | Hide comments
@@ -1,210 +1,202
1 1 [Tester]
2 2 TesterType = "EHF1"
3 3 TesterName = "Elektrischer Hochfrequenzmessplatz 1"
4 4
5 5 [cHardware]
6 6 POS_AxesNames.<size(s)> = "3"
7 7 POS_AxesNames 0 = "X"
8 8 POS_AxesNames 1 = "Y"
9 9 POS_AxesNames 2 = "Z"
10 10 POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000"
11 11 POS_Limits_Axis1 = "<size(s)=2> 0 210"
12 12 POS_Limits_Axis2 = "<size(s)=2> 0 242"
13 13 POS_Limits_Axis3 = "<size(s)=2> 0 111"
14 14 POS_AxesFlipped.<size(s)> = "3"
15 15 POS_AxesFlipped 0 = "True"
16 16 POS_AxesFlipped 1 = "True"
17 17 POS_AxesFlipped 2 = "False"
18 18 Pos_MaxVelocity = "300"
19 19 Pos_MaxVelocityUnblockedDoor = "20"
20 20 Pos_MaxAcceleration = "15000"
21 21 Pos_MaxAccelerationUnblockedDoor = "20"
22 22 Pos_MaxJerk = "140000"
23 23 Pos_MaxJerkUnblockedDoor = "14000"
24 24 ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000"
25 25 ForceLimit_Axis3_Text.<size(s)> = "5"
26 26 ForceLimit_Axis3_Text 0 = ""
27 27 ForceLimit_Axis3_Text 1 = "�30 N"
28 28 ForceLimit_Axis3_Text 2 = "�40 N"
29 29 ForceLimit_Axis3_Text 3 = "�50 N"
30 30 ForceLimit_Axis3_Text 4 = "�60 N"
31 31 ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
32 32 AO_ForceLimit = "Dev0/Ao0"
33 33 DI_E-Stop = "Dev0/AuxPort/Di0"
34 34 DI_Door = "Dev0/AuxPort/Di1"
35 35 DC_Wait = "100"
36 36
37 37 [cEHF1]
38 38 POSConfig.IP = "10.1.2.1"
39 39 POSConfig.Port = "502"
40 40 DMMConfig.ResourceName = "COM1"
41 41 DMMConfig.Baudrate = "9600"
42 42 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
43 43 ChargeMeterConfig.ResourceName = "COM10"
44 44 ChargeMeterConfig.Baudrate = "9600"
45 45 NetworkAnalyser.Names.<size(s)> = "2"
46 46 NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
47 47 NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
48 48 NetworkAnalyser.ResourceNames.<size(s)> = "2"
49 49 NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
50 50 NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
51 51 NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
52 52 NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
53 53 NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
54 54 NetworkAnalyser.TestResultFolder.<size(s)> = "2"
55 55 NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
56 56 NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
57 57 NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
58 58 NetworkAnalyser.ResultFolder.<size(s)> = "2"
59 59 NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
60 60 NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
61 61 NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
62 62 NetworkAnalyser.CommonMemory.<size(s)> = "2"
63 63 NetworkAnalyser.CommonMemory 0 = "Z:\"
64 64 NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
65 DC_Device = "USB-6509"
66
67 [cSCP]
68 DMMConfig.ResourceName = "COM1"
69 DMMConfig.Baudrate = "9600"
70 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
71 ChargeMeterConfig.ResourceName = "COM2"
72 ChargeMeterConfig.Baudrate = "9600"
73 65 DC_Device = "USB-6509"
74 66
75 67 [cPathes]
76 68 pUser = "C:\Work\PositioningSystem\support\User.txt"
77 69 pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
78 70 pGraphs = "C:\Work\PositioningSystem\support\Temp"
79 71 pExcelReports = "C:\Work\PositioningSystem\support\Temp"
80 72 pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
81 73 pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
82 74 pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
83 75
84 76 [cDefaultValues]
85 77 MovingParameter.Velocity = "20,000000"
86 78 MovingParameter.Acceleration = "50,000000"
87 79 MovingParameter.Jerk = "140000,000000"
88 80 ForceLimit_Z = "0"
89 81 Learning_Steps.X = "1,000000"
90 82 Learning_Steps.Y = "1,000000"
91 83 Learning_Steps.Z = "1,000000"
92 84 Learning_ZStopOffset = "-2,000000"
93 85 Learning_Measurements = "3"
94 86 Learning_NetworkAnalyser = "0"
95 87 TestNumber = "1"
96 88 Comment = ""
97 89 Matrix_WorkingStroke = "4,000000"
98 90 Matrix_Z- = "1,000000"
99 91 Matrix_Contacts = "1"
100 92 Matrix_XDelta = "1,000000"
101 93 Matrix_XSize = "2"
102 94 Matrix_YDelta = "1,000000"
103 95 Matrix_YSize = "2"
104 96 Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
105 97 TestRun_LoopsNumber = "2"
106 98 TestRun_Delay = "100"
107 99 TestRun_-Z = "1"
108 100 TestRun_Stroke = "4"
109 101 TestRun_Time = "0"
110 102 TestRun_StrokesNumber = "10"
111 103
112 104
113 105 [cReport]
114 106 FileNameFormat = "%s_TestProtocol.txt"
115 107 FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
116 108 FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
117 109 ReportNameFormat = "%s_TestReport.xlsx"
118 110 ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
119 111 ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
120 112 ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
121 113 ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
122 114 StandardTemplate.<size(s)> = "4"
123 115 StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
124 116 StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
125 117 StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
126 118 StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
127 119 StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
128 120 StandardTemplate_Scripts.<size(s)> = "4"
129 121 StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
130 122 StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
131 123 StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
132 124 StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
133 125 DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
134 126
135 127 [cStateMessages]
136 128 Info.<size(s)> = "28"
137 129 Info 0 = "Not-Halt aktiviert!"
138 130 Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
139 131 Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
140 132 Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
141 133 Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
142 134 Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
143 135 Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
144 136 Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
145 137 Info 8 = "Testdaten anlegen"
146 138 Info 9 = "Lernfahrten"
147 139 Info 10 = "Achsen werden initialisiert..."
148 140 Info 11 = "Referenzfahrt l�uft..."
149 141 Info 12 = "X-Achse wird referenziert..."
150 142 Info 13 = "Y-Achse wird referenziert..."
151 143 Info 14 = "Z-Achse wird referenziert..."
152 144 Info 15 = "Position wird angefahren..."
153 145 Info 16 = "Kraftmessung wird durchgef�hrt..."
154 146 Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
155 147 Info 18 = "Testablauf"
156 148 Info 19 = "Test geladen"
157 149 Info 20 = "Laufender Test..."
158 150 Info 21 = "Verz�gerung l�uft..."
159 151 Info 22 = "Messung wird durchgef�hrt..."
160 152 Info 23 = "Lastwechsel wird ausgef�hrt..."
161 153 Info 24 = "Test erfolgreich abgeschlossen"
162 154 Info 25 = "Fehler aufgetreten!"
163 155 Info 26 = "Test abgebrochen!"
164 156 Info 27 = "Testprotokoll wird erstellt... Bitte warten"
165 157 Info 28 = "Testprotokoll erstellt"
166 158 Result.<size(s)> = "29"
167 159 Result 0 = "Not-Halt"
168 160 Result 1 = ""
169 161 Result 2 = ""
170 162 Result 3 = ""
171 163 Result 4 = "Einrichtbetrieb"
172 164 Result 5 = "Einrichtbetrieb"
173 165 Result 6 = "Einrichtbetrieb"
174 166 Result 7 = ""
175 167 Result 8 = "Bereit"
176 168 Result 9 = "Einrichtbetrieb"
177 169 Result 10 = "Einrichtbetrieb"
178 170 Result 11 = "Einrichtbetrieb"
179 171 Result 12 = "Einrichtbetrieb"
180 172 Result 13 = "Einrichtbetrieb"
181 173 Result 14 = "Einrichtbetrieb"
182 174 Result 15 = "Einrichtbetrieb"
183 175 Result 16 = "Einrichtbetrieb"
184 176 Result 17 = "Einrichtbetrieb"
185 177 Result 18 = "Bereit"
186 178 Result 19 = "Bereit"
187 179 Result 20 = "Test l�uft"
188 180 Result 21 = "Test l�uft"
189 181 Result 22 = "Einrichtbetrieb"
190 182 Result 23 = "Test l�uft"
191 183 Result 24 = "Test fertig"
192 184 Result 25 = "Fehler"
193 185 Result 26 = "Test Stop"
194 186 Result 27 = ""
195 187 Result 28 = ""
196 188
197 189 [cDialogMessages]
198 190 Messages.<size(s)> = "12"
199 191 Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
200 192 Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
201 193 Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
202 194 Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
203 195 Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
204 196 Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
205 197 Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
206 198 Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
207 199 Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
208 200 Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
209 201 Messages 10 = "W�hlen Sie eine Vorlage aus:"
210 202 Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file
Show file before | Show file after | Hide comments
@@ -1,216 +1,185
1 1 [Tester]
2 2 TesterType = "SCP"
3 3 TesterName = "SCP-Tester"
4 4
5 5 [cHardware]
6 6 POS_AxesNames.<size(s)> = "3"
7 7 POS_AxesNames 0 = "X"
8 8 POS_AxesNames 1 = "Y"
9 9 POS_AxesNames 2 = "Z"
10 10 POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000"
11 11 POS_Limits_Axis1 = "<size(s)=2> 0 325"
12 12 POS_Limits_Axis2 = "<size(s)=2> 0 350"
13 13 POS_Limits_Axis3 = "<size(s)=2> -44 0"
14 14 POS_AxesFlipped.<size(s)> = "3"
15 15 POS_AxesFlipped 0 = "True"
16 16 POS_AxesFlipped 1 = "True"
17 17 POS_AxesFlipped 2 = "False"
18 18 Pos_MaxVelocity = "600"
19 19 Pos_MaxVelocityUnblockedDoor = "20"
20 20 Pos_MaxAcceleration = "40000"
21 21 Pos_MaxAccelerationUnblockedDoor = "20"
22 22 Pos_MaxJerk = "0"
23 23 Pos_MaxJerkUnblockedDoor = "14000"
24 24 ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000"
25 25 ForceLimit_Axis3_Text.<size(s)> = "5"
26 26 ForceLimit_Axis3_Text 0 = ""
27 27 ForceLimit_Axis3_Text 1 = "�30 N"
28 28 ForceLimit_Axis3_Text 2 = "�40 N"
29 29 ForceLimit_Axis3_Text 3 = "�50 N"
30 30 ForceLimit_Axis3_Text 4 = "�60 N"
31 31 ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
32 32 AO_ForceLimit = "Dev0/Ao0"
33 33 DI_E-Stop = "Dev2/port0/line0"
34 34 DI_Door = "Dev2/port0/line1"
35 35 DC_Wait = "100"
36 36
37 [cEHF1]
38 POSConfig.IP = "10.1.2.1"
39 POSConfig.Port = "502"
40 DMMConfig.ResourceName = "COM1"
41 DMMConfig.Baudrate = "9600"
42 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
43 ChargeMeterConfig.ResourceName = "COM10"
44 ChargeMeterConfig.Baudrate = "9600"
45 NetworkAnalyser.Names.<size(s)> = "2"
46 NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
47 NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
48 NetworkAnalyser.ResourceNames.<size(s)> = "2"
49 NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
50 NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
51 NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
52 NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
53 NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
54 NetworkAnalyser.TestResultFolder.<size(s)> = "2"
55 NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
56 NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
57 NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
58 NetworkAnalyser.ResultFolder.<size(s)> = "2"
59 NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
60 NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
61 NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
62 NetworkAnalyser.CommonMemory.<size(s)> = "2"
63 NetworkAnalyser.CommonMemory 0 = "Z:\"
64 NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
65 DC_Device = "USB-6509"
66
67 37 [cSCP]
68 38 POSConfig.IP = "10.1.2.1"
69 39 POSConfig.Port = "502"
70 40 DMMConfig.ResourceName = "COM1"
71 41 DMMConfig.Baudrate = "9600"
72 42 DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
73 43 ChargeMeterConfig.ResourceName = "COM2"
74 44 ChargeMeterConfig.Baudrate = "9600"
75 45 DC_Device = "USB-6509"
76 46 DOs.<size(s)> = "2"
77 47 DOs 0 = "Dev2/port4/line0"
78 DOs 1 = "Dev2/port4/line1
79 "
48 DOs 1 = "Dev2/port4/line1"
80 49
81 50 [cPathes]
82 51 pUser = "C:\Work\PositioningSystem\support\User.txt"
83 52 pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
84 53 pGraphs = "C:\Work\PositioningSystem\support\Temp"
85 54 pExcelReports = "C:\Work\PositioningSystem\support\Temp"
86 55 pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
87 56 pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
88 57 pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
89 58
90 59 [cDefaultValues]
91 60 MovingParameter.Velocity = "20,000000"
92 61 MovingParameter.Acceleration = "20,000000"
93 62 MovingParameter.Jerk = "0,000000"
94 63 ForceLimit_Z = "1"
95 64 Learning_Steps.X = "1,000000"
96 65 Learning_Steps.Y = "1,000000"
97 66 Learning_Steps.Z = "1,000000"
98 67 Learning_ZStopOffset = "-2,000000"
99 68 Learning_Measurements = "3"
100 69 Learning_NetworkAnalyser = "0"
101 70 TestNumber = "1"
102 71 Comment = ""
103 72 Matrix_WorkingStroke = "4,000000"
104 73 Matrix_Z- = "1,000000"
105 74 Matrix_Contacts = "1"
106 75 Matrix_XDelta = "1,000000"
107 76 Matrix_XSize = "2"
108 77 Matrix_YDelta = "1,000000"
109 78 Matrix_YSize = "2"
110 79 Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
111 80 TestRun_LoopsNumber = "2"
112 81 TestRun_Delay = "100"
113 82 TestRun_-Z = "1"
114 83 TestRun_Stroke = "4"
115 84 TestRun_Time = "0"
116 85 TestRun_StrokesNumber = "10"
117 86
118 87
119 88 [cReport]
120 89 FileNameFormat = "%s_TestProtocol.txt"
121 90 FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
122 91 FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
123 92 ReportNameFormat = "%s_TestReport.xlsx"
124 93 ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
125 94 ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
126 95 ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
127 96 ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
128 97 StandardTemplate.<size(s)> = "4"
129 98 StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
130 99 StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
131 100 StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
132 101 StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
133 102 StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
134 103 StandardTemplate_Scripts.<size(s)> = "4"
135 104 StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
136 105 StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
137 106 StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
138 107 StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
139 108 DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
140 109
141 110 [cStateMessages]
142 111 Info.<size(s)> = "28"
143 112 Info 0 = "Not-Halt aktiviert!"
144 113 Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
145 114 Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
146 115 Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
147 116 Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
148 117 Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
149 118 Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
150 119 Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
151 120 Info 8 = "Testdaten anlegen"
152 121 Info 9 = "Lernfahrten"
153 122 Info 10 = "Achsen werden initialisiert..."
154 123 Info 11 = "Referenzfahrt l�uft..."
155 124 Info 12 = "X-Achse wird referenziert..."
156 125 Info 13 = "Y-Achse wird referenziert..."
157 126 Info 14 = "Z-Achse wird referenziert..."
158 127 Info 15 = "Position wird angefahren..."
159 128 Info 16 = "Kraftmessung wird durchgef�hrt..."
160 129 Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
161 130 Info 18 = "Testablauf"
162 131 Info 19 = "Test geladen"
163 132 Info 20 = "Laufender Test..."
164 133 Info 21 = "Verz�gerung l�uft..."
165 134 Info 22 = "Messung wird durchgef�hrt..."
166 135 Info 23 = "Lastwechsel wird ausgef�hrt..."
167 136 Info 24 = "Test erfolgreich abgeschlossen"
168 137 Info 25 = "Fehler aufgetreten!"
169 138 Info 26 = "Test abgebrochen!"
170 139 Info 27 = "Testprotokoll wird erstellt... Bitte warten"
171 140 Info 28 = "Testprotokoll erstellt"
172 141 Result.<size(s)> = "29"
173 142 Result 0 = "Not-Halt"
174 143 Result 1 = ""
175 144 Result 2 = ""
176 145 Result 3 = ""
177 146 Result 4 = "Einrichtbetrieb"
178 147 Result 5 = "Einrichtbetrieb"
179 148 Result 6 = "Einrichtbetrieb"
180 149 Result 7 = ""
181 150 Result 8 = "Bereit"
182 151 Result 9 = "Einrichtbetrieb"
183 152 Result 10 = "Einrichtbetrieb"
184 153 Result 11 = "Einrichtbetrieb"
185 154 Result 12 = "Einrichtbetrieb"
186 155 Result 13 = "Einrichtbetrieb"
187 156 Result 14 = "Einrichtbetrieb"
188 157 Result 15 = "Einrichtbetrieb"
189 158 Result 16 = "Einrichtbetrieb"
190 159 Result 17 = "Einrichtbetrieb"
191 160 Result 18 = "Bereit"
192 161 Result 19 = "Bereit"
193 162 Result 20 = "Test l�uft"
194 163 Result 21 = "Test l�uft"
195 164 Result 22 = "Einrichtbetrieb"
196 165 Result 23 = "Test l�uft"
197 166 Result 24 = "Test fertig"
198 167 Result 25 = "Fehler"
199 168 Result 26 = "Test Stop"
200 169 Result 27 = ""
201 170 Result 28 = ""
202 171
203 172 [cDialogMessages]
204 173 Messages.<size(s)> = "12"
205 174 Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
206 175 Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
207 176 Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
208 177 Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
209 178 Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
210 179 Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
211 180 Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
212 181 Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
213 182 Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
214 183 Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
215 184 Messages 10 = "W�hlen Sie eine Vorlage aus:"
216 185 Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen." No newline at end of file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
Show file before | Show file after | Hide comments
1 NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff
General Comments 0
You need to be logged in to leave comments. Login now