Projects/PositioningSystem Commit

- SCP tested

LabVIEW -

r15:16

parent child

The requested changes are too big and content was truncated. Show full diff

PositioningSystem [LV2021]/Initialization.ini +1 -32

             [Tester]
             TesterType = "SCP"
             TesterName = "SCP-Tester"
   No newline at end of file
             [cHardware]
             POS_AxesNames.<size(s)> = "3"
             POS_AxesNames 0 = "X"
             POS_AxesNames 1 = "Y"
             POS_AxesNames 2 = "Z"
             POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000"
             POS_Limits_Axis1 = "<size(s)=2> 0 325"
             POS_Limits_Axis2 = "<size(s)=2> 0 350"
             POS_Limits_Axis3 = "<size(s)=2> -44 0"
             POS_AxesFlipped.<size(s)> = "3"
             POS_AxesFlipped 0 = "True"
             POS_AxesFlipped 1 = "True"
             POS_AxesFlipped 2 = "False"
             Pos_MaxVelocity = "600"
             Pos_MaxVelocityUnblockedDoor = "20"
             Pos_MaxAcceleration = "40000"
             Pos_MaxAccelerationUnblockedDoor = "20"
             Pos_MaxJerk = "0"
             Pos_MaxJerkUnblockedDoor = "14000"
             ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000"
             ForceLimit_Axis3_Text.<size(s)> = "5"
             ForceLimit_Axis3_Text 0 = ""
             ForceLimit_Axis3_Text 1 = "�30 N"
             ForceLimit_Axis3_Text 2 = "�40 N"
             ForceLimit_Axis3_Text 3 = "�50 N"
             ForceLimit_Axis3_Text 4 = "�60 N"
             ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
             AO_ForceLimit = "Dev0/Ao0"
             DI_E-Stop = "Dev2/port0/line0"
             DI_Door = "Dev2/port0/line1"
             DC_Wait = "100"
              No newline at end of file
-            [cEHF1]
              No newline at end of file
-            POSConfig.IP = "10.1.2.1"
              No newline at end of file
-            POSConfig.Port = "502"
              No newline at end of file
-            DMMConfig.ResourceName = "COM1"
              No newline at end of file
-            DMMConfig.Baudrate = "9600"
              No newline at end of file
-            DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
              No newline at end of file
-            ChargeMeterConfig.ResourceName = "COM10"
              No newline at end of file
-            ChargeMeterConfig.Baudrate = "9600"
              No newline at end of file
-            NetworkAnalyser.Names.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
              No newline at end of file
-            NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
              No newline at end of file
-            NetworkAnalyser.ResourceNames.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
              No newline at end of file
-            NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
              No newline at end of file
-            NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
              No newline at end of file
-            NetworkAnalyser.ResultFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
              No newline at end of file
-            NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
              No newline at end of file
-            NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
              No newline at end of file
-            NetworkAnalyser.CommonMemory.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.CommonMemory 0 = "Z:\"
              No newline at end of file
-            NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
              No newline at end of file
-            DC_Device = "USB-6509"
              No newline at end of file
-  No newline at end of file
             [cSCP]
             POSConfig.IP = "10.1.2.1"
             POSConfig.Port = "502"
             DMMConfig.ResourceName = "COM1"
             DMMConfig.Baudrate = "9600"
             DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
             ChargeMeterConfig.ResourceName = "COM2"
             ChargeMeterConfig.Baudrate = "9600"
             DC_Device = "USB-6509"
             DOs.<size(s)> = "2"
             DOs 0 = "Dev2/port4/line0"
             DOs 1 = "Dev2/port4/line1"
  No newline at end of file
-            DOs 1 = "Dev2/port4/line1
              No newline at end of file
-            "
  No newline at end of file
   No newline at end of file
             [cPathes]
             pUser = "C:\Work\PositioningSystem\support\User.txt"
             pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
             pGraphs = "C:\Work\PositioningSystem\support\Temp"
             pExcelReports = "C:\Work\PositioningSystem\support\Temp"
             pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
             pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
             pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
   No newline at end of file
             [cDefaultValues]
             MovingParameter.Velocity = "20,000000"
             MovingParameter.Acceleration = "20,000000"
             MovingParameter.Jerk = "0,000000"
             ForceLimit_Z = "1"
             Learning_Steps.X = "1,000000"
             Learning_Steps.Y = "1,000000"
             Learning_Steps.Z = "1,000000"
             Learning_ZStopOffset = "-2,000000"
             Learning_Measurements = "3"
             Learning_NetworkAnalyser = "0"
             TestNumber = "1"
             Comment = ""
             Matrix_WorkingStroke = "4,000000"
             Matrix_Z- = "1,000000"
             Matrix_Contacts = "1"
             Matrix_XDelta = "1,000000"
             Matrix_XSize = "2"
             Matrix_YDelta = "1,000000"
             Matrix_YSize = "2"
             Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
             TestRun_LoopsNumber = "2"
             TestRun_Delay = "100"
             TestRun_-Z = "1"
             TestRun_Stroke = "4"
             TestRun_Time = "0"
             TestRun_StrokesNumber = "10"
   No newline at end of file
   No newline at end of file
             [cReport]
             FileNameFormat = "%s_TestProtocol.txt"
             FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
             FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
             ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
             ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
             StandardTemplate.<size(s)> = "4"
             StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
             StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
             StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
             StandardTemplate_Scripts.<size(s)> = "4"
             StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
             StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
             StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
             StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
             DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
   No newline at end of file
             [cStateMessages]
             Info.<size(s)> = "28"
             Info 0 = "Not-Halt aktiviert!"
             Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
             Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
             Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
             Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
             Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
             Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
             Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 8 = "Testdaten anlegen"
             Info 9 = "Lernfahrten"
             Info 10 = "Achsen werden initialisiert..."
             Info 11 = "Referenzfahrt l�uft..."
             Info 12 = "X-Achse wird referenziert..."
             Info 13 = "Y-Achse wird referenziert..."
             Info 14 = "Z-Achse wird referenziert..."
             Info 15 = "Position wird angefahren..."
             Info 16 = "Kraftmessung wird durchgef�hrt..."
             Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
             Info 18 = "Testablauf"
             Info 19 = "Test geladen"
             Info 20 = "Laufender Test..."
             Info 21 = "Verz�gerung l�uft..."
             Info 22 = "Messung wird durchgef�hrt..."
             Info 23 = "Lastwechsel wird ausgef�hrt..."
             Info 24 = "Test erfolgreich abgeschlossen"
             Info 25 = "Fehler aufgetreten!"
             Info 26 = "Test abgebrochen!"
             Info 27 = "Testprotokoll wird erstellt... Bitte warten"
             Info 28 = "Testprotokoll erstellt"
             Result.<size(s)> = "29"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = ""
             Result 3 = ""
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Einrichtbetrieb"
             Result 6 = "Einrichtbetrieb"
             Result 7 = ""
             Result 8 = "Bereit"
             Result 9 = "Einrichtbetrieb"
             Result 10 = "Einrichtbetrieb"
             Result 11 = "Einrichtbetrieb"
             Result 12 = "Einrichtbetrieb"
             Result 13 = "Einrichtbetrieb"
             Result 14 = "Einrichtbetrieb"
             Result 15 = "Einrichtbetrieb"
             Result 16 = "Einrichtbetrieb"
             Result 17 = "Einrichtbetrieb"
             Result 18 = "Bereit"
             Result 19 = "Bereit"
             Result 20 = "Test l�uft"
             Result 21 = "Test l�uft"
             Result 22 = "Einrichtbetrieb"
             Result 23 = "Test l�uft"
             Result 24 = "Test fertig"
             Result 25 = "Fehler"
             Result 26 = "Test Stop"
             Result 27 = ""
             Result 28 = ""
   No newline at end of file
             [cDialogMessages]
             Messages.<size(s)> = "12"
             Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
             Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
             Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
             Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
             Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
             Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
             Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
             Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
             Messages 10 = "W�hlen Sie eine Vorlage aus:"
             Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen."

PositioningSystem [LV2021]/Initialization_EHF1.ini 0 -8

             [Tester]
             TesterType = "EHF1"
             TesterName = "Elektrischer Hochfrequenzmessplatz 1"
   No newline at end of file
             [cHardware]
             POS_AxesNames.<size(s)> = "3"
             POS_AxesNames 0 = "X"
             POS_AxesNames 1 = "Y"
             POS_AxesNames 2 = "Z"
             POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000"
             POS_Limits_Axis1 = "<size(s)=2> 0 210"
             POS_Limits_Axis2 = "<size(s)=2> 0 242"
             POS_Limits_Axis3 = "<size(s)=2> 0 111"
             POS_AxesFlipped.<size(s)> = "3"
             POS_AxesFlipped 0 = "True"
             POS_AxesFlipped 1 = "True"
             POS_AxesFlipped 2 = "False"
             Pos_MaxVelocity = "300"
             Pos_MaxVelocityUnblockedDoor = "20"
             Pos_MaxAcceleration = "15000"
             Pos_MaxAccelerationUnblockedDoor = "20"
             Pos_MaxJerk = "140000"
             Pos_MaxJerkUnblockedDoor = "14000"
             ForceLimit_Axis3 = "<size(s)=5> 10,000000 5,000000 6,000000 7,000000 8,000000"
             ForceLimit_Axis3_Text.<size(s)> = "5"
             ForceLimit_Axis3_Text 0 = ""
             ForceLimit_Axis3_Text 1 = "�30 N"
             ForceLimit_Axis3_Text 2 = "�40 N"
             ForceLimit_Axis3_Text 3 = "�50 N"
             ForceLimit_Axis3_Text 4 = "�60 N"
             ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
             AO_ForceLimit = "Dev0/Ao0"
             DI_E-Stop = "Dev0/AuxPort/Di0"
             DI_Door = "Dev0/AuxPort/Di1"
             DC_Wait = "100"
   No newline at end of file
             [cEHF1]
             POSConfig.IP = "10.1.2.1"
             POSConfig.Port = "502"
             DMMConfig.ResourceName = "COM1"
             DMMConfig.Baudrate = "9600"
             DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
             ChargeMeterConfig.ResourceName = "COM10"
             ChargeMeterConfig.Baudrate = "9600"
             NetworkAnalyser.Names.<size(s)> = "2"
             NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
             NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
             NetworkAnalyser.ResourceNames.<size(s)> = "2"
             NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
             NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
             NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
             NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
             NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
             NetworkAnalyser.TestResultFolder.<size(s)> = "2"
             NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
             NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
             NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
             NetworkAnalyser.ResultFolder.<size(s)> = "2"
             NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
             NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
             NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
             NetworkAnalyser.CommonMemory.<size(s)> = "2"
             NetworkAnalyser.CommonMemory 0 = "Z:\"
             NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
              No newline at end of file
-            DC_Device = "USB-6509"
              No newline at end of file
              No newline at end of file
-            [cSCP]
              No newline at end of file
-            DMMConfig.ResourceName = "COM1"
              No newline at end of file
-            DMMConfig.Baudrate = "9600"
              No newline at end of file
-            DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
              No newline at end of file
-            ChargeMeterConfig.ResourceName = "COM2"
              No newline at end of file
-            ChargeMeterConfig.Baudrate = "9600"
  No newline at end of file
             DC_Device = "USB-6509"
   No newline at end of file
             [cPathes]
             pUser = "C:\Work\PositioningSystem\support\User.txt"
             pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
             pGraphs = "C:\Work\PositioningSystem\support\Temp"
             pExcelReports = "C:\Work\PositioningSystem\support\Temp"
             pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
             pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
             pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
   No newline at end of file
             [cDefaultValues]
             MovingParameter.Velocity = "20,000000"
             MovingParameter.Acceleration = "50,000000"
             MovingParameter.Jerk = "140000,000000"
             ForceLimit_Z = "0"
             Learning_Steps.X = "1,000000"
             Learning_Steps.Y = "1,000000"
             Learning_Steps.Z = "1,000000"
             Learning_ZStopOffset = "-2,000000"
             Learning_Measurements = "3"
             Learning_NetworkAnalyser = "0"
             TestNumber = "1"
             Comment = ""
             Matrix_WorkingStroke = "4,000000"
             Matrix_Z- = "1,000000"
             Matrix_Contacts = "1"
             Matrix_XDelta = "1,000000"
             Matrix_XSize = "2"
             Matrix_YDelta = "1,000000"
             Matrix_YSize = "2"
             Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
             TestRun_LoopsNumber = "2"
             TestRun_Delay = "100"
             TestRun_-Z = "1"
             TestRun_Stroke = "4"
             TestRun_Time = "0"
             TestRun_StrokesNumber = "10"
   No newline at end of file
   No newline at end of file
             [cReport]
             FileNameFormat = "%s_TestProtocol.txt"
             FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
             FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
             ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
             ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
             StandardTemplate.<size(s)> = "4"
             StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
             StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
             StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
             StandardTemplate_Scripts.<size(s)> = "4"
             StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
             StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
             StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
             StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
             DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
   No newline at end of file
             [cStateMessages]
             Info.<size(s)> = "28"
             Info 0 = "Not-Halt aktiviert!"
             Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
             Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
             Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
             Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
             Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
             Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
             Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 8 = "Testdaten anlegen"
             Info 9 = "Lernfahrten"
             Info 10 = "Achsen werden initialisiert..."
             Info 11 = "Referenzfahrt l�uft..."
             Info 12 = "X-Achse wird referenziert..."
             Info 13 = "Y-Achse wird referenziert..."
             Info 14 = "Z-Achse wird referenziert..."
             Info 15 = "Position wird angefahren..."
             Info 16 = "Kraftmessung wird durchgef�hrt..."
             Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
             Info 18 = "Testablauf"
             Info 19 = "Test geladen"
             Info 20 = "Laufender Test..."
             Info 21 = "Verz�gerung l�uft..."
             Info 22 = "Messung wird durchgef�hrt..."
             Info 23 = "Lastwechsel wird ausgef�hrt..."
             Info 24 = "Test erfolgreich abgeschlossen"
             Info 25 = "Fehler aufgetreten!"
             Info 26 = "Test abgebrochen!"
             Info 27 = "Testprotokoll wird erstellt... Bitte warten"
             Info 28 = "Testprotokoll erstellt"
             Result.<size(s)> = "29"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = ""
             Result 3 = ""
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Einrichtbetrieb"
             Result 6 = "Einrichtbetrieb"
             Result 7 = ""
             Result 8 = "Bereit"
             Result 9 = "Einrichtbetrieb"
             Result 10 = "Einrichtbetrieb"
             Result 11 = "Einrichtbetrieb"
             Result 12 = "Einrichtbetrieb"
             Result 13 = "Einrichtbetrieb"
             Result 14 = "Einrichtbetrieb"
             Result 15 = "Einrichtbetrieb"
             Result 16 = "Einrichtbetrieb"
             Result 17 = "Einrichtbetrieb"
             Result 18 = "Bereit"
             Result 19 = "Bereit"
             Result 20 = "Test l�uft"
             Result 21 = "Test l�uft"
             Result 22 = "Einrichtbetrieb"
             Result 23 = "Test l�uft"
             Result 24 = "Test fertig"
             Result 25 = "Fehler"
             Result 26 = "Test Stop"
             Result 27 = ""
             Result 28 = ""
   No newline at end of file
             [cDialogMessages]
             Messages.<size(s)> = "12"
             Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
             Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
             Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
             Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
             Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
             Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
             Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
             Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
             Messages 10 = "W�hlen Sie eine Vorlage aus:"
             Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen."

PositioningSystem [LV2021]/Initialization_SCP.ini +1 -32

             [Tester]
             TesterType = "SCP"
             TesterName = "SCP-Tester"
   No newline at end of file
             [cHardware]
             POS_AxesNames.<size(s)> = "3"
             POS_AxesNames 0 = "X"
             POS_AxesNames 1 = "Y"
             POS_AxesNames 2 = "Z"
             POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 -2,000000"
             POS_Limits_Axis1 = "<size(s)=2> 0 325"
             POS_Limits_Axis2 = "<size(s)=2> 0 350"
             POS_Limits_Axis3 = "<size(s)=2> -44 0"
             POS_AxesFlipped.<size(s)> = "3"
             POS_AxesFlipped 0 = "True"
             POS_AxesFlipped 1 = "True"
             POS_AxesFlipped 2 = "False"
             Pos_MaxVelocity = "600"
             Pos_MaxVelocityUnblockedDoor = "20"
             Pos_MaxAcceleration = "40000"
             Pos_MaxAccelerationUnblockedDoor = "20"
             Pos_MaxJerk = "0"
             Pos_MaxJerkUnblockedDoor = "14000"
             ForceLimit_Axis3 = "<size(s)=5> 10,000000 0,750000 0,780000 0,813000 0,920000"
             ForceLimit_Axis3_Text.<size(s)> = "5"
             ForceLimit_Axis3_Text 0 = ""
             ForceLimit_Axis3_Text 1 = "�30 N"
             ForceLimit_Axis3_Text 2 = "�40 N"
             ForceLimit_Axis3_Text 3 = "�50 N"
             ForceLimit_Axis3_Text 4 = "�60 N"
             ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 10,000000"
             AO_ForceLimit = "Dev0/Ao0"
             DI_E-Stop = "Dev2/port0/line0"
             DI_Door = "Dev2/port0/line1"
             DC_Wait = "100"
              No newline at end of file
-            [cEHF1]
              No newline at end of file
-            POSConfig.IP = "10.1.2.1"
              No newline at end of file
-            POSConfig.Port = "502"
              No newline at end of file
-            DMMConfig.ResourceName = "COM1"
              No newline at end of file
-            DMMConfig.Baudrate = "9600"
              No newline at end of file
-            DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
              No newline at end of file
-            ChargeMeterConfig.ResourceName = "COM10"
              No newline at end of file
-            ChargeMeterConfig.Baudrate = "9600"
              No newline at end of file
-            NetworkAnalyser.Names.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.Names 0 = "Rohde & Schwarz (ZVA67)"
              No newline at end of file
-            NetworkAnalyser.Names 1 = "Rohde & Schwarz (ZNL20)"
              No newline at end of file
-            NetworkAnalyser.ResourceNames.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.ResourceNames 0 = "TCPIP0::10.1.2.30::inst0::INSTR"
              No newline at end of file
-            NetworkAnalyser.ResourceNames 1 = "TCPIP0::10.1.2.10::inst0::INSTR"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder 0 = "C:\Rohde&Schwarz\Nwa\Calibration\RecallSets\"
              No newline at end of file
-            NetworkAnalyser.StateFilesFolder 1 = "C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Calibration\RecallSets\"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
              No newline at end of file
-            NetworkAnalyser.TestResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
              No newline at end of file
-            NetworkAnalyser.TestResultFormat = "%d.%m.%Y-%H%M%S"
              No newline at end of file
-            NetworkAnalyser.ResultFolder.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.ResultFolder 0 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZVA67\"
              No newline at end of file
-            NetworkAnalyser.ResultFolder 1 = "C:\Work\PositioningSystem\support\ResultData\Tests\ZNL20\"
              No newline at end of file
-            NetworkAnalyser.ResultFormat = "%d.%m.%Y-%H%M%S_HF"
              No newline at end of file
-            NetworkAnalyser.CommonMemory.<size(s)> = "2"
              No newline at end of file
-            NetworkAnalyser.CommonMemory 0 = "Z:\"
              No newline at end of file
-            NetworkAnalyser.CommonMemory 1 = "D:\Testdaten\"
              No newline at end of file
-            DC_Device = "USB-6509"
              No newline at end of file
-  No newline at end of file
             [cSCP]
             POSConfig.IP = "10.1.2.1"
             POSConfig.Port = "502"
             DMMConfig.ResourceName = "COM1"
             DMMConfig.Baudrate = "9600"
             DMMConfig.ChannelList = "101,102,103,104,105,106,107,108,109,110"
             ChargeMeterConfig.ResourceName = "COM2"
             ChargeMeterConfig.Baudrate = "9600"
             DC_Device = "USB-6509"
             DOs.<size(s)> = "2"
             DOs 0 = "Dev2/port4/line0"
             DOs 1 = "Dev2/port4/line1"
  No newline at end of file
-            DOs 1 = "Dev2/port4/line1
              No newline at end of file
-            "
  No newline at end of file
   No newline at end of file
             [cPathes]
             pUser = "C:\Work\PositioningSystem\support\User.txt"
             pResultsFolder = "C:\Work\PositioningSystem\support\ResultData"
             pGraphs = "C:\Work\PositioningSystem\support\Temp"
             pExcelReports = "C:\Work\PositioningSystem\support\Temp"
             pTestRun = "C:\Work\PositioningSystem\support\TestRuns"
             pMatrix = "C:\Work\PositioningSystem\support\Matrixes"
             pDC = "C:\Work\PositioningSystem\support\DC-Configurations"
   No newline at end of file
             [cDefaultValues]
             MovingParameter.Velocity = "20,000000"
             MovingParameter.Acceleration = "20,000000"
             MovingParameter.Jerk = "0,000000"
             ForceLimit_Z = "1"
             Learning_Steps.X = "1,000000"
             Learning_Steps.Y = "1,000000"
             Learning_Steps.Z = "1,000000"
             Learning_ZStopOffset = "-2,000000"
             Learning_Measurements = "3"
             Learning_NetworkAnalyser = "0"
             TestNumber = "1"
             Comment = ""
             Matrix_WorkingStroke = "4,000000"
             Matrix_Z- = "1,000000"
             Matrix_Contacts = "1"
             Matrix_XDelta = "1,000000"
             Matrix_XSize = "2"
             Matrix_YDelta = "1,000000"
             Matrix_YSize = "2"
             Colors = "<size(s)=10> 16776960 16744448 16744640 16711935 10879142 8388863 8421631 423327 3381759 9567230"
             TestRun_LoopsNumber = "2"
             TestRun_Delay = "100"
             TestRun_-Z = "1"
             TestRun_Stroke = "4"
             TestRun_Time = "0"
             TestRun_StrokesNumber = "10"
   No newline at end of file
   No newline at end of file
             [cReport]
             FileNameFormat = "%s_TestProtocol.txt"
             FileNameFormat_Standard = "%d.%m.%Y-%H%M%S_Standard.csv"
             FileNameFormat_DC = "%d.%m.%Y-%H%M%S_DC.csv"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\PositioningSystem\support\ReportTemplates\TemplateEnglish.xlsx"
             ForceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ForceTemplate.xlsx"
             ResistanceForceDistanceTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\ResistanceForceDistanceTemplate.xlsx"
             StandardTemplate.<size(s)> = "4"
             StandardTemplate 0 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 1 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate.xlsx"
             StandardTemplate 2 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Common.xlsx"
             StandardTemplate 3 = "C:\Work\PositioningSystem\support\ReportTemplates\StandardTemplate_Increment.xlsx"
             StandardTemplate_Macro = "C:\Work\PositioningSystem\support\ReportTemplates\Macro.bas"
             StandardTemplate_Scripts.<size(s)> = "4"
             StandardTemplate_Scripts 0 = "AktualisiereXYDiagrammWiderstand"
             StandardTemplate_Scripts 1 = "AktualisiereXYDiagrammKraft"
             StandardTemplate_Scripts 2 = "AktualisiereXYDiagrammInkrementWiderstand"
             StandardTemplate_Scripts 3 = "AktualisiereXYDiagrammInkrementKraft"
             DCTemplate = "C:\Work\PositioningSystem\support\ReportTemplates\DCTemplate.xlsx"
   No newline at end of file
             [cStateMessages]
             Info.<size(s)> = "28"
             Info 0 = "Not-Halt aktiviert!"
             Info 1 = "Einrichtbetrieb f�r Achsensteuerung aktiviert! Nur manuelle Positionierung m�glich"
             Info 2 = "T�r ist freigegeben! Nur manuelle Positionierung m�glich"
             Info 3 = "Positioniereinheit wird initialisiert! Bitte warten..."
             Info 4 = "Datenerfassungssystem wird initialisiert! Bitte warten..."
             Info 5 = "Ladungsverst�rker wird initialisiert! Bitte warten..."
             Info 6 = "Netzwerkanalysator wird initialisiert! Bitte warten..."
             Info 7 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 8 = "Testdaten anlegen"
             Info 9 = "Lernfahrten"
             Info 10 = "Achsen werden initialisiert..."
             Info 11 = "Referenzfahrt l�uft..."
             Info 12 = "X-Achse wird referenziert..."
             Info 13 = "Y-Achse wird referenziert..."
             Info 14 = "Z-Achse wird referenziert..."
             Info 15 = "Position wird angefahren..."
             Info 16 = "Kraftmessung wird durchgef�hrt..."
             Info 17 = "Widerstand/Kraftmessung wird durchgef�hrt..."
             Info 18 = "Testablauf"
             Info 19 = "Test geladen"
             Info 20 = "Laufender Test..."
             Info 21 = "Verz�gerung l�uft..."
             Info 22 = "Messung wird durchgef�hrt..."
             Info 23 = "Lastwechsel wird ausgef�hrt..."
             Info 24 = "Test erfolgreich abgeschlossen"
             Info 25 = "Fehler aufgetreten!"
             Info 26 = "Test abgebrochen!"
             Info 27 = "Testprotokoll wird erstellt... Bitte warten"
             Info 28 = "Testprotokoll erstellt"
             Result.<size(s)> = "29"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = ""
             Result 3 = ""
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Einrichtbetrieb"
             Result 6 = "Einrichtbetrieb"
             Result 7 = ""
             Result 8 = "Bereit"
             Result 9 = "Einrichtbetrieb"
             Result 10 = "Einrichtbetrieb"
             Result 11 = "Einrichtbetrieb"
             Result 12 = "Einrichtbetrieb"
             Result 13 = "Einrichtbetrieb"
             Result 14 = "Einrichtbetrieb"
             Result 15 = "Einrichtbetrieb"
             Result 16 = "Einrichtbetrieb"
             Result 17 = "Einrichtbetrieb"
             Result 18 = "Bereit"
             Result 19 = "Bereit"
             Result 20 = "Test l�uft"
             Result 21 = "Test l�uft"
             Result 22 = "Einrichtbetrieb"
             Result 23 = "Test l�uft"
             Result 24 = "Test fertig"
             Result 25 = "Fehler"
             Result 26 = "Test Stop"
             Result 27 = ""
             Result 28 = ""
   No newline at end of file
             [cDialogMessages]
             Messages.<size(s)> = "12"
             Messages 0 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
             Messages 1 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
             Messages 2 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 3 = "W�hlen Sie einen Testablauf zum Laden aus"
             Messages 4 = "Geben Sie einen Namen f�r den Testablauf ein"
             Messages 5 = "Die Testmatrix wird gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."
             Messages 6 = "W�hlen Sie eine Testmatrix zum Laden aus"
             Messages 7 = "Geben Sie einen Namen f�r die Testmatrix ein"
             Messages 8 = "W�hlen Sie eine DC-Konfiguration zum Laden aus"
             Messages 9 = "Geben Sie einen Namen f�r die DC-Konfiguration ein"
             Messages 10 = "W�hlen Sie eine Vorlage aus:"
             Messages 11 = "Test wurde abgebrochen.\0AOption zur Achseninitialisierung w�hlen oder abbrechen."

PositioningSystem [LV2021]/PositioningSystem.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/OverrideVIs/ConfigMeasure_DMM.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/OverrideVIs/Init_NetworkAnalyser.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/OverrideVIs/Measure.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/OverrideVIs/MeasureForce.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/OverrideVIs/Move.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_EHF1/class_EHF1.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/CheckÊ-Stop.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/Dialog_MeasureDC.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/PositioningUnit_Close.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/PositioningUnit_DisableAxes.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/PositioningUnit_GetPosition.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/PositioningUnit_Move.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/SubVIs/Simulation.vi 0 0

NO CONTENT: modified file

PositioningSystem [LV2021]/class_PositioningSystem/class_PositioningSystem.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/ConfigMeasure_DMM.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/DisableAxes.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/GetPosition.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/Measure.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/MeasureForce.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/OverrideVIs/Move.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

PositioningSystem [LV2021]/class_SCP/class_SCP.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/PositioningSystem.exe 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization_EHF1.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization_SCP.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

General Comments 0

Write
Preview

You need to be logged in to leave comments. Login now

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages