Projects/CurrentTester Commit

- Protocol creation: move files added;...

LabVIEW -

r6:7

parent child

Expand all files

The requested changes are too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetReports.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/CurrentTester.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/Initialization.ini +12 -3

             [Tester]
             TesterType = "HSMP1"
             TesterName = "Hochstrommessplatz 1"
             MaxCurrent = 600
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "Keithley: Ch6"
             SensorsDescription 1 = "Keithley: Ch7"
             SensorsDescription 2 = "Keithley: Ch8"
             SensorsDescription 3 = "Keithley: Ch9"
             SensorsDescription 4 = "Keithley: Ch10"
             SensorsDescription 5 = ""
             SensorsDescription 6 = ""
             SensorsDescription 7 = ""
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
             VoltageDescription.<size(s)> = "4 2"
             VoltageDescription 0 = "Keithley: Ch2"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
             VoltageDescription 2 = "Keithley: Ch4"
             VoltageDescription 3 = "Shunt- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
   No newline at end of file
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "Dev1/port1/line0"
             DI_Setup = ""
             PowerSupply_MinCurrent = "1"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "13"
             Measurement_Channels 0 = "102"
             Measurement_Channels 1 = "102"
             Measurement_Channels 2 = "104"
             Measurement_Channels 3 = "106"
             Measurement_Channels 4 = "107"
             Measurement_Channels 5 = "108"
             Measurement_Channels 6 = "109"
             Measurement_Channels 7 = "110"
             Measurement_Channels 8 = ""
             Measurement_Channels 9 = ""
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             Measurement_Channels 12 = ""
             ShuntResistance = 0,00006
             Measurement_Check = False
             DMM_VISAName = "COM1"
             DMM_ContactLimits = "<size(s)=2> 0,0 0,05"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
   No newline at end of file
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = 5,500000
             PowerSupply_OverVoltageProtection = 6,000000
+            PowerSupply_WarningPower = "780,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "790,000000"
  No newline at end of file
             DMM_Function = "2-wire Resistance"
             DMM_AutoRange = False
             DMM_Range = "0,020000"
             DMM_Resolution = "0,001000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "5,000000"
             Configuration_AI_Voltage 0.Minimum = "-5,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "1,000000"
             Configuration_AI_Voltage 1.Minimum = "-1,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "10"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 0.Unit = "Deg C"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Unit = "Deg C"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Unit = "Deg C"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 3.Unit = "Deg C"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 4.Unit = "Deg C"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Unit = "Deg C"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Unit = "Deg C"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Unit = "Deg C"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Unit = "Deg C"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Unit = "Deg C"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
             Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Thermocouple"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Thermocouple"
   No newline at end of file
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = "8,000000"
             PowerSupply_OverVoltageProtection = "9,000000"
+            PowerSupply_WarningPower = "4700,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "4750,000000"
  No newline at end of file
             DMM_Baudrate = "9600"
             Measurement_Channels_AutoRange.<size(s)> = "13"
             Measurement_Channels_AutoRange 0 = "TRUE"
             Measurement_Channels_AutoRange 1 = "TRUE"
             Measurement_Channels_AutoRange 2 = "TRUE"
             Measurement_Channels_AutoRange 3 = "TRUE"
             Measurement_Channels_AutoRange 4 = "TRUE"
             Measurement_Channels_AutoRange 5 = "TRUE"
             Measurement_Channels_AutoRange 6 = "TRUE"
             Measurement_Channels_AutoRange 7 = "TRUE"
             Measurement_Channels_AutoRange 8 = "TRUE"
             Measurement_Channels_AutoRange 9 = "TRUE"
             Measurement_Channels_AutoRange 10 = "TRUE"
             Measurement_Channels_AutoRange 11 = "TRUE"
             Measurement_Channels_AutoRange 12 = "TRUE"
             Measurement_Channels_Range = "<size(s)=13> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             Measurement_Channels_Resolution.<size(s)> = "13"
             Measurement_Channels_Resolution 0 = "6.5"
             Measurement_Channels_Resolution 1 = "6.5"
             Measurement_Channels_Resolution 2 = "6.5"
             Measurement_Channels_Resolution 3 = "6.5"
             Measurement_Channels_Resolution 4 = "6.5"
             Measurement_Channels_Resolution 5 = "6.5"
             Measurement_Channels_Resolution 6 = "6.5"
             Measurement_Channels_Resolution 7 = "6.5"
             Measurement_Channels_Resolution 8 = "6.5"
             Measurement_Channels_Resolution 9 = "6.5"
             Measurement_Channels_Resolution 10 = "6.5"
             Measurement_Channels_Resolution 11 = "6.5"
             Measurement_Channels_Resolution 12 = "6.5"
             Resistance_Function = "Resistance"
             Resistance_OffsetCompensation = "FALSE"
             TableControl_Out_LiftTable = "Dev1/port0/line5"
             TableControl_Out_SettingMode.<size(s)> = "2"
             TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
             TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
   No newline at end of file
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "250"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "True"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
   No newline at end of file
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
   No newline at end of file
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
   No newline at end of file
             [Protocol]
             ProtocolNameFormat = "%s_Report.pdf"
  No newline at end of file
-            ProtocolNameFormat = "%s_Report.docx"
  No newline at end of file
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
+            ProtocolDataFolderName = "data"
  No newline at end of file
   No newline at end of file
             [StateMessages]
             Info.<size(s)> = "20"
  No newline at end of file
-            Info.<size(s)> = "18"
  No newline at end of file
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Info 17 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
             Info 18 = "Protokoll wird erstellt... Bitte warten"
-            Result.<size(s)> = "18"
  No newline at end of file
+             No newline at end of file
+            Info 19 = "Protokoll erstellt"
              No newline at end of file
+            Result.<size(s)> = "20"
  No newline at end of file
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
+            Result 18 = "Bereit"
              No newline at end of file
+            Result 19 = "Bereit"
  No newline at end of file
   No newline at end of file
             [DialogMessages]
             Messages.<size(s)> = "3"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"
             Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

CurrentTester [LabVIEW]/Initialization_HSMP1.ini +14 -7

             [Tester]
             TesterType = "HSMP1"
             TesterName = "Hochstrommessplatz 1"
             MaxCurrent = 600
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "Keithley: Ch6"
             SensorsDescription 1 = "Keithley: Ch7"
             SensorsDescription 2 = "Keithley: Ch8"
             SensorsDescription 3 = "Keithley: Ch9"
             SensorsDescription 4 = "Keithley: Ch10"
             SensorsDescription 5 = ""
             SensorsDescription 6 = ""
             SensorsDescription 7 = ""
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
             VoltageDescription.<size(s)> = "4 2"
             VoltageDescription 0 = "Keithley: Ch2"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
             VoltageDescription 2 = "Keithley: Ch4"
             VoltageDescription 3 = "Shunt- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
   No newline at end of file
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "Dev1/port1/line0"
             DI_Setup = ""
             PowerSupply_MinCurrent = "1"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "13"
             Measurement_Channels 0 = "102"
             Measurement_Channels 1 = "102"
             Measurement_Channels 2 = "104"
             Measurement_Channels 3 = "106"
             Measurement_Channels 4 = "107"
             Measurement_Channels 5 = "108"
             Measurement_Channels 6 = "109"
             Measurement_Channels 7 = "110"
             Measurement_Channels 8 = ""
             Measurement_Channels 9 = ""
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             Measurement_Channels 12 = ""
             ShuntResistance = 0,00006
             Measurement_Check = False
             DMM_VISAName = "COM1"
             DMM_ContactLimits = "<size(s)=2> 0,0 0,05"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
   No newline at end of file
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = 5,500000
             PowerSupply_OverVoltageProtection = 6,000000
+            PowerSupply_WarningPower = "780,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "790,000000"
  No newline at end of file
             DMM_Function = "2-wire Resistance"
             DMM_AutoRange = False
             DMM_Range = "0,020000"
             DMM_Resolution = "0,001000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "5,000000"
             Configuration_AI_Voltage 0.Minimum = "-5,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "1,000000"
             Configuration_AI_Voltage 1.Minimum = "-1,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "10"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 0.Unit = "Deg C"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Unit = "Deg C"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Unit = "Deg C"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 3.Unit = "Deg C"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 4.Unit = "Deg C"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Unit = "Deg C"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Unit = "Deg C"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Unit = "Deg C"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Unit = "Deg C"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Unit = "Deg C"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
             Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Thermocouple"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Thermocouple"
   No newline at end of file
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = "8,000000"
             PowerSupply_OverVoltageProtection = "9,000000"
+            PowerSupply_WarningPower = "4700,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "4750,000000"
  No newline at end of file
             DMM_Baudrate = "9600"
             Measurement_Channels_AutoRange.<size(s)> = "13"
             Measurement_Channels_AutoRange 0 = "TRUE"
             Measurement_Channels_AutoRange 1 = "TRUE"
             Measurement_Channels_AutoRange 2 = "TRUE"
             Measurement_Channels_AutoRange 3 = "TRUE"
             Measurement_Channels_AutoRange 4 = "TRUE"
             Measurement_Channels_AutoRange 5 = "TRUE"
             Measurement_Channels_AutoRange 6 = "TRUE"
             Measurement_Channels_AutoRange 7 = "TRUE"
             Measurement_Channels_AutoRange 8 = "TRUE"
             Measurement_Channels_AutoRange 9 = "TRUE"
             Measurement_Channels_AutoRange 10 = "TRUE"
             Measurement_Channels_AutoRange 11 = "TRUE"
             Measurement_Channels_AutoRange 12 = "TRUE"
             Measurement_Channels_Range = "<size(s)=13> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             Measurement_Channels_Resolution.<size(s)> = "13"
             Measurement_Channels_Resolution 0 = "6.5"
             Measurement_Channels_Resolution 1 = "6.5"
             Measurement_Channels_Resolution 2 = "6.5"
             Measurement_Channels_Resolution 3 = "6.5"
             Measurement_Channels_Resolution 4 = "6.5"
             Measurement_Channels_Resolution 5 = "6.5"
             Measurement_Channels_Resolution 6 = "6.5"
             Measurement_Channels_Resolution 7 = "6.5"
             Measurement_Channels_Resolution 8 = "6.5"
             Measurement_Channels_Resolution 9 = "6.5"
             Measurement_Channels_Resolution 10 = "6.5"
             Measurement_Channels_Resolution 11 = "6.5"
             Measurement_Channels_Resolution 12 = "6.5"
             Resistance_Function = "Resistance"
             Resistance_OffsetCompensation = "FALSE"
             TableControl_Out_LiftTable = "Dev1/port0/line5"
             TableControl_Out_SettingMode.<size(s)> = "2"
             TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
             TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
   No newline at end of file
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "250"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "True"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
   No newline at end of file
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
   No newline at end of file
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
   No newline at end of file
             [Protocol]
             ProtocolNameFormat = "%s_Report.pdf"
  No newline at end of file
-            ProtocolNameFormat = "%s_Report.docx"
  No newline at end of file
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
-            ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.
+             No newline at end of file
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
-            Die Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
+             No newline at end of file
             ProtocolDataFolderName = "data"
  No newline at end of file
-            ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.
              No newline at end of file
-            The test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
  No newline at end of file
   No newline at end of file
             [StateMessages]
             Info.<size(s)> = "20"
  No newline at end of file
-            Info.<size(s)> = "18"
  No newline at end of file
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Info 17 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
             Info 18 = "Protokoll wird erstellt... Bitte warten"
-            Result.<size(s)> = "18"
  No newline at end of file
+             No newline at end of file
+            Info 19 = "Protokoll erstellt"
              No newline at end of file
+            Result.<size(s)> = "20"
  No newline at end of file
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
+            Result 18 = "Bereit"
              No newline at end of file
+            Result 19 = "Bereit"
  No newline at end of file
   No newline at end of file
             [DialogMessages]
             Messages.<size(s)> = "3"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"
             Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

CurrentTester [LabVIEW]/Initialization_SMP3.ini +14 -7

             [Tester]
             TesterType = "SMP3"
             TesterName = "Strommessplatz 3"
             MaxCurrent = 130
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "False"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "NI-9210: Ch1"
             SensorsDescription 1 = "NI-9210: Ch2"
             SensorsDescription 2 = "NI-9210: Ch3"
             SensorsDescription 3 = "NI-9210: Ch4"
             SensorsDescription 4 = "NI-9219: Ch1"
             SensorsDescription 5 = "NI-9219: Ch2"
             SensorsDescription 6 = "NI-9219: Ch3"
             SensorsDescription 7 = "NI-9219: Ch4"
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
             VoltageDescription.<size(s)> = "4 2"
             VoltageDescription 0 = "NI PXI-6281: Ch4"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
             VoltageDescription 2 = "NI PXI-6281: Ch5"
             VoltageDescription 3 = "Shunt- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
   No newline at end of file
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "PXI1Slot5/port0/line5"
             DI_Setup = "PXI1Slot5/port0/line4"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "12"
             Measurement_Channels 0 = "PXI1Slot5/ai4"
             Measurement_Channels 1 = "PXI1Slot5/ai5"
             Measurement_Channels 2 = "NI9210/ai0"
             Measurement_Channels 3 = "NI9210/ai1"
             Measurement_Channels 4 = "NI9210/ai2"
             Measurement_Channels 5 = "NI9210/ai3"
             Measurement_Channels 6 = "NI9219/ai0"
             Measurement_Channels 7 = "NI9219/ai1"
             Measurement_Channels 8 = "NI9219/ai2"
             Measurement_Channels 9 = "NI9219/ai3"
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             ShuntResistance = 0,001
             Measurement_Check = False
             DMM_VISAName = "PXI1Slot3"
             DMM_ContactLimits = "<size(s)=2> 0,0 1,0"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
   No newline at end of file
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = 5,500000
             PowerSupply_OverVoltageProtection = 6,000000
+            PowerSupply_WarningPower = "780,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "790,000000"
  No newline at end of file
             DMM_Function = "2-wire Resistance"
             DMM_AutoRange = False
             DMM_Range = "0,020000"
             DMM_Resolution = "0,001000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "5,000000"
             Configuration_AI_Voltage 0.Minimum = "-5,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "1,000000"
             Configuration_AI_Voltage 1.Minimum = "-1,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "10"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 0.Unit = "Deg C"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Unit = "Deg C"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Unit = "Deg C"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 3.Unit = "Deg C"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 4.Unit = "Deg C"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Unit = "Deg C"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Unit = "Deg C"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Unit = "Deg C"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Unit = "Deg C"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Unit = "Deg C"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
             Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Thermocouple"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Thermocouple"
   No newline at end of file
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = "8,000000"
             PowerSupply_OverVoltageProtection = "9,000000"
+            PowerSupply_WarningPower = "4700,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "4750,000000"
  No newline at end of file
             DMM_Baudrate = "9600"
             Measurement_Channels_AutoRange.<size(s)> = "13"
             Measurement_Channels_AutoRange 0 = "TRUE"
             Measurement_Channels_AutoRange 1 = "TRUE"
             Measurement_Channels_AutoRange 2 = "TRUE"
             Measurement_Channels_AutoRange 3 = "TRUE"
             Measurement_Channels_AutoRange 4 = "TRUE"
             Measurement_Channels_AutoRange 5 = "TRUE"
             Measurement_Channels_AutoRange 6 = "TRUE"
             Measurement_Channels_AutoRange 7 = "TRUE"
             Measurement_Channels_AutoRange 8 = "TRUE"
             Measurement_Channels_AutoRange 9 = "TRUE"
             Measurement_Channels_AutoRange 10 = "TRUE"
             Measurement_Channels_AutoRange 11 = "TRUE"
             Measurement_Channels_AutoRange 12 = "TRUE"
             Measurement_Channels_Range = "<size(s)=13> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             Measurement_Channels_Resolution.<size(s)> = "13"
             Measurement_Channels_Resolution 0 = "6.5"
             Measurement_Channels_Resolution 1 = "6.5"
             Measurement_Channels_Resolution 2 = "6.5"
             Measurement_Channels_Resolution 3 = "6.5"
             Measurement_Channels_Resolution 4 = "6.5"
             Measurement_Channels_Resolution 5 = "6.5"
             Measurement_Channels_Resolution 6 = "6.5"
             Measurement_Channels_Resolution 7 = "6.5"
             Measurement_Channels_Resolution 8 = "6.5"
             Measurement_Channels_Resolution 9 = "6.5"
             Measurement_Channels_Resolution 10 = "6.5"
             Measurement_Channels_Resolution 11 = "6.5"
             Measurement_Channels_Resolution 12 = "6.5"
             Resistance_Function = "Resistance"
             Resistance_OffsetCompensation = "FALSE"
             TableControl_Out_LiftTable = "Dev1/port0/line5"
             TableControl_Out_SettingMode.<size(s)> = "2"
             TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
             TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
   No newline at end of file
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "80"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
   No newline at end of file
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
   No newline at end of file
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
   No newline at end of file
             [Protocol]
             ProtocolNameFormat = "%s_Report.pdf"
  No newline at end of file
-            ProtocolNameFormat = "%s_Report.docx"
  No newline at end of file
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
-            ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.
+             No newline at end of file
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
-            Die Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
+             No newline at end of file
             ProtocolDataFolderName = "data"
  No newline at end of file
-            ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.
              No newline at end of file
-            The test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
  No newline at end of file
   No newline at end of file
             [StateMessages]
             Info.<size(s)> = "20"
  No newline at end of file
-            Info.<size(s)> = "18"
  No newline at end of file
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Info 17 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
             Info 18 = "Protokoll wird erstellt... Bitte warten"
-            Result.<size(s)> = "18"
  No newline at end of file
+             No newline at end of file
+            Info 19 = "Protokoll erstellt"
              No newline at end of file
+            Result.<size(s)> = "20"
  No newline at end of file
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
+            Result 18 = "Bereit"
              No newline at end of file
+            Result 19 = "Bereit"
  No newline at end of file
   No newline at end of file
             [DialogMessages]
             Messages.<size(s)> = "3"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"
             Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cProtocolConfiguration.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cSystem.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eState.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckE-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogProtocol.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetReportName.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Finish.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Start.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Init.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadChildClass.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadStandardValues.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CreateProtocol.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_LoadTests_Statistic_Limits.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SaveTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvInfo.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvSystem.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/DisplayResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Config.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/CTLs/cHSMP1.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Resistance.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Temperatures.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Voltages.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/CTLs/cSMP3.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Resistance.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Temperatures.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Voltages.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldResults.vi 0 0

NO CONTENT: modified file

builds/CurrentTester.exe 0 0

NO CONTENT: modified file

builds/data/Initialization.ini +14 -7

             [Tester]
             TesterType = "SMP3"
             TesterName = "Strommessplatz 3"
             MaxCurrent = 130
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "False"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "NI-9210: Ch1"
             SensorsDescription 1 = "NI-9210: Ch2"
             SensorsDescription 2 = "NI-9210: Ch3"
             SensorsDescription 3 = "NI-9210: Ch4"
             SensorsDescription 4 = "NI-9219: Ch1"
             SensorsDescription 5 = "NI-9219: Ch2"
             SensorsDescription 6 = "NI-9219: Ch3"
             SensorsDescription 7 = "NI-9219: Ch4"
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
             VoltageDescription.<size(s)> = "4 2"
             VoltageDescription 0 = "NI PXI-6281: Ch4"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
             VoltageDescription 2 = "NI PXI-6281: Ch5"
             VoltageDescription 3 = "Shunt- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
   No newline at end of file
             [Hardware]
             SimulateDevices = False
             DI_E-Stop = "PXI1Slot5/port0/line5"
             DI_Setup = "PXI1Slot5/port0/line4"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "12"
             Measurement_Channels 0 = "PXI1Slot5/ai4"
             Measurement_Channels 1 = "PXI1Slot5/ai5"
             Measurement_Channels 2 = "NI9210/ai0"
             Measurement_Channels 3 = "NI9210/ai1"
             Measurement_Channels 4 = "NI9210/ai2"
             Measurement_Channels 5 = "NI9210/ai3"
             Measurement_Channels 6 = "NI9219/ai0"
             Measurement_Channels 7 = "NI9219/ai1"
             Measurement_Channels 8 = "NI9219/ai2"
             Measurement_Channels 9 = "NI9219/ai3"
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             ShuntResistance = 0,001
             Measurement_Check = False
             DMM_VISAName = "PXI1Slot3"
             DMM_ContactLimits = "<size(s)=2> 0,0 1,0"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
   No newline at end of file
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = 5,500000
             PowerSupply_OverVoltageProtection = 6,000000
+            PowerSupply_WarningPower = "780,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "790,000000"
  No newline at end of file
             DMM_Function = "2-wire Resistance"
             DMM_AutoRange = False
             DMM_Range = "0,020000"
             DMM_Resolution = "0,001000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "5,000000"
             Configuration_AI_Voltage 0.Minimum = "-5,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "1,000000"
             Configuration_AI_Voltage 1.Minimum = "-1,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "10"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 0.Unit = "Deg C"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Unit = "Deg C"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Unit = "Deg C"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 3.Unit = "Deg C"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 4.Unit = "Deg C"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Unit = "Deg C"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Unit = "Deg C"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Unit = "Deg C"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Unit = "Deg C"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Unit = "Deg C"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
             Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Thermocouple"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Thermocouple"
   No newline at end of file
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = "8,000000"
             PowerSupply_OverVoltageProtection = "9,000000"
+            PowerSupply_WarningPower = "4700,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "4750,000000"
  No newline at end of file
             DMM_Baudrate = "9600"
             Measurement_Channels_AutoRange.<size(s)> = "13"
             Measurement_Channels_AutoRange 0 = "TRUE"
             Measurement_Channels_AutoRange 1 = "TRUE"
             Measurement_Channels_AutoRange 2 = "TRUE"
             Measurement_Channels_AutoRange 3 = "TRUE"
             Measurement_Channels_AutoRange 4 = "TRUE"
             Measurement_Channels_AutoRange 5 = "TRUE"
             Measurement_Channels_AutoRange 6 = "TRUE"
             Measurement_Channels_AutoRange 7 = "TRUE"
             Measurement_Channels_AutoRange 8 = "TRUE"
             Measurement_Channels_AutoRange 9 = "TRUE"
             Measurement_Channels_AutoRange 10 = "TRUE"
             Measurement_Channels_AutoRange 11 = "TRUE"
             Measurement_Channels_AutoRange 12 = "TRUE"
             Measurement_Channels_Range = "<size(s)=13> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             Measurement_Channels_Resolution.<size(s)> = "13"
             Measurement_Channels_Resolution 0 = "6.5"
             Measurement_Channels_Resolution 1 = "6.5"
             Measurement_Channels_Resolution 2 = "6.5"
             Measurement_Channels_Resolution 3 = "6.5"
             Measurement_Channels_Resolution 4 = "6.5"
             Measurement_Channels_Resolution 5 = "6.5"
             Measurement_Channels_Resolution 6 = "6.5"
             Measurement_Channels_Resolution 7 = "6.5"
             Measurement_Channels_Resolution 8 = "6.5"
             Measurement_Channels_Resolution 9 = "6.5"
             Measurement_Channels_Resolution 10 = "6.5"
             Measurement_Channels_Resolution 11 = "6.5"
             Measurement_Channels_Resolution 12 = "6.5"
             Resistance_Function = "Resistance"
             Resistance_OffsetCompensation = "FALSE"
             TableControl_Out_LiftTable = "Dev1/port0/line5"
             TableControl_Out_SettingMode.<size(s)> = "2"
             TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
             TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
   No newline at end of file
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "80"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
   No newline at end of file
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
   No newline at end of file
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
   No newline at end of file
             [Protocol]
             ProtocolNameFormat = "%s_Report.pdf"
  No newline at end of file
-            ProtocolNameFormat = "%s_Report.docx"
  No newline at end of file
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
-            ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.
+             No newline at end of file
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
-            Die Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
+             No newline at end of file
             ProtocolDataFolderName = "data"
  No newline at end of file
-            ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.
              No newline at end of file
-            The test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
  No newline at end of file
   No newline at end of file
             [StateMessages]
             Info.<size(s)> = "20"
  No newline at end of file
-            Info.<size(s)> = "18"
  No newline at end of file
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Info 17 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
             Info 18 = "Protokoll wird erstellt... Bitte warten"
-            Result.<size(s)> = "18"
  No newline at end of file
+             No newline at end of file
+            Info 19 = "Protokoll erstellt"
              No newline at end of file
+            Result.<size(s)> = "20"
  No newline at end of file
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
+            Result 18 = "Bereit"
              No newline at end of file
+            Result 19 = "Bereit"
  No newline at end of file
   No newline at end of file
             [DialogMessages]
             Messages.<size(s)> = "3"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"
             Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

builds/data/Initialization_HSMP1.ini +14 -7

             [Tester]
             TesterType = "HSMP1"
             TesterName = "Hochstrommessplatz 1"
             MaxCurrent = 600
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "Keithley: Ch6"
             SensorsDescription 1 = "Keithley: Ch7"
             SensorsDescription 2 = "Keithley: Ch8"
             SensorsDescription 3 = "Keithley: Ch9"
             SensorsDescription 4 = "Keithley: Ch10"
             SensorsDescription 5 = ""
             SensorsDescription 6 = ""
             SensorsDescription 7 = ""
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
             VoltageDescription.<size(s)> = "4 2"
             VoltageDescription 0 = "Keithley: Ch2"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
             VoltageDescription 2 = "Keithley: Ch4"
             VoltageDescription 3 = "Shunt- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
   No newline at end of file
             [Hardware]
             SimulateDevices = False
             DI_E-Stop = "Dev1/port1/line0"
             DI_Setup = ""
             PowerSupply_MinCurrent = "1"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "13"
             Measurement_Channels 0 = "102"
             Measurement_Channels 1 = "102"
             Measurement_Channels 2 = "104"
             Measurement_Channels 3 = "106"
             Measurement_Channels 4 = "107"
             Measurement_Channels 5 = "108"
             Measurement_Channels 6 = "109"
             Measurement_Channels 7 = "110"
             Measurement_Channels 8 = ""
             Measurement_Channels 9 = ""
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             Measurement_Channels 12 = ""
             ShuntResistance = 0,00006
             Measurement_Check = False
             DMM_VISAName = "COM1"
             DMM_ContactLimits = "<size(s)=2> 0,0 0,05"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
   No newline at end of file
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = 5,500000
             PowerSupply_OverVoltageProtection = 6,000000
+            PowerSupply_WarningPower = "780,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "790,000000"
  No newline at end of file
             DMM_Function = "2-wire Resistance"
             DMM_AutoRange = False
             DMM_Range = "0,020000"
             DMM_Resolution = "0,001000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "5,000000"
             Configuration_AI_Voltage 0.Minimum = "-5,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "1,000000"
             Configuration_AI_Voltage 1.Minimum = "-1,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "10"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 0.Unit = "Deg C"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Unit = "Deg C"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Unit = "Deg C"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 3.Unit = "Deg C"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 4.Unit = "Deg C"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Unit = "Deg C"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Unit = "Deg C"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Unit = "Deg C"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Unit = "Deg C"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Unit = "Deg C"
             Configuration_AI_NI9219_Resistance.<size(s)> = "4"
             Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Type.<size(s)> = "4"
             Configuration_AI_NI9219_Type 0 = "Thermocouple"
             Configuration_AI_NI9219_Type 1 = "Thermocouple"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Thermocouple"
   No newline at end of file
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             PowerSupply_OutputVoltage = "8,000000"
             PowerSupply_OverVoltageProtection = "9,000000"
+            PowerSupply_WarningPower = "4700,000000"
              No newline at end of file
+            PowerSupply_AbortPower = "4750,000000"
  No newline at end of file
             DMM_Baudrate = "9600"
             Measurement_Channels_AutoRange.<size(s)> = "13"
             Measurement_Channels_AutoRange 0 = "TRUE"
             Measurement_Channels_AutoRange 1 = "TRUE"
             Measurement_Channels_AutoRange 2 = "TRUE"
             Measurement_Channels_AutoRange 3 = "TRUE"
             Measurement_Channels_AutoRange 4 = "TRUE"
             Measurement_Channels_AutoRange 5 = "TRUE"
             Measurement_Channels_AutoRange 6 = "TRUE"
             Measurement_Channels_AutoRange 7 = "TRUE"
             Measurement_Channels_AutoRange 8 = "TRUE"
             Measurement_Channels_AutoRange 9 = "TRUE"
             Measurement_Channels_AutoRange 10 = "TRUE"
             Measurement_Channels_AutoRange 11 = "TRUE"
             Measurement_Channels_AutoRange 12 = "TRUE"
             Measurement_Channels_Range = "<size(s)=13> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             Measurement_Channels_Resolution.<size(s)> = "13"
             Measurement_Channels_Resolution 0 = "6.5"
             Measurement_Channels_Resolution 1 = "6.5"
             Measurement_Channels_Resolution 2 = "6.5"
             Measurement_Channels_Resolution 3 = "6.5"
             Measurement_Channels_Resolution 4 = "6.5"
             Measurement_Channels_Resolution 5 = "6.5"
             Measurement_Channels_Resolution 6 = "6.5"
             Measurement_Channels_Resolution 7 = "6.5"
             Measurement_Channels_Resolution 8 = "6.5"
             Measurement_Channels_Resolution 9 = "6.5"
             Measurement_Channels_Resolution 10 = "6.5"
             Measurement_Channels_Resolution 11 = "6.5"
             Measurement_Channels_Resolution 12 = "6.5"
             Resistance_Function = "Resistance"
             Resistance_OffsetCompensation = "FALSE"
             TableControl_Out_LiftTable = "Dev1/port0/line5"
             TableControl_Out_SettingMode.<size(s)> = "2"
             TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
             TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
   No newline at end of file
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "250"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "True"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
   No newline at end of file
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\ResultData"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
   No newline at end of file
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
   No newline at end of file
             [Protocol]
             ProtocolNameFormat = "%s_Report.pdf"
  No newline at end of file
-            ProtocolNameFormat = "%s_Report.docx"
  No newline at end of file
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
-            ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.
+             No newline at end of file
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
-            Die Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
+             No newline at end of file
             ProtocolDataFolderName = "data"
  No newline at end of file
-            ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.
              No newline at end of file
-            The test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
  No newline at end of file
   No newline at end of file
             [StateMessages]
             Info.<size(s)> = "20"
  No newline at end of file
-            Info.<size(s)> = "18"
  No newline at end of file
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Info 17 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
             Info 18 = "Protokoll wird erstellt... Bitte warten"
-            Result.<size(s)> = "18"
  No newline at end of file
+             No newline at end of file
+            Info 19 = "Protokoll erstellt"
              No newline at end of file
+            Result.<size(s)> = "20"
  No newline at end of file
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
+            Result 18 = "Bereit"
              No newline at end of file
+            Result 19 = "Bereit"
  No newline at end of file
   No newline at end of file
             [DialogMessages]
             Messages.<size(s)> = "3"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"
             Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

builds/data/Initialization_SMP3.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

General Comments 0

Write
Preview

You need to be logged in to leave comments. Login now

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages