Projects/CurrentTester Commit

- Read pressure in setup mode implemented;...

LabVIEW -

r55:56

parent child

The requested changes are too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/ReadPressure.vi created 10644 0 0

	1	NO CONTENT: new file 10644			NO CONTENT: new file 10644
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/CurrentTester.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/Initialization.ini +18 -17

             [Tester]
             TesterType = "HSMP2"
             TesterName = "Hochstrommessplatz 2"
             MaxCurrent = 1000
             MaxTemperature = 250
             MaxAmbientTemperature = 50
             TemperatureWarning- = 10
             SensorsEnable.<size(s)> = "15"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "True"
             SensorsEnable 6 = "True"
             SensorsEnable 7 = "True"
             SensorsEnable 8 = "True"
             SensorsEnable 9 = "True"
             SensorsEnable 10 = "False"
             SensorsEnable 11 = "False"
             SensorsEnable 12 = "False"
             SensorsEnable 13 = "False"
             SensorsEnable 14 = "False"
             SensorsDescription.<size(s)> = "15"
-            SensorsDescription 0 = "NI-9212: Ch1"
+            SensorsDescription 0 = "NI-9212: Ch0"
-            SensorsDescription 1 = "NI-9212: Ch2"
+            SensorsDescription 1 = "NI-9212: Ch1"
-            SensorsDescription 2 = "NI-9212: Ch3"
+            SensorsDescription 2 = "NI-9212: Ch2"
-            SensorsDescription 3 = "NI-9212: Ch4"
+            SensorsDescription 3 = "NI-9212: Ch3"
-            SensorsDescription 4 = "NI-9212: Ch5"
+            SensorsDescription 4 = "NI-9212: Ch4"
-            SensorsDescription 5 = "NI-9212: Ch6"
+            SensorsDescription 5 = "NI-9212: Ch5"
-            SensorsDescription 6 = "NI-9212: Ch7"
+            SensorsDescription 6 = "NI-9212: Ch6"
-            SensorsDescription 7 = "NI-9212: Ch8"
+            SensorsDescription 7 = "NI-9212: Ch7"
-            SensorsDescription 8 = "NI-9219_1: Ch1"
+            SensorsDescription 8 = "NI-9219_1: Ch0"
-            SensorsDescription 9 = "NI-9219_1: Ch2"
+            SensorsDescription 9 = "NI-9219_1: Ch1"
-            SensorsDescription 10 = "NI-9219_1: Ch3"
+            SensorsDescription 10 = "NI-9219_1: Ch2"
-            SensorsDescription 11 = "NI-9219_2: Ch1"
+            SensorsDescription 11 = "NI-9219_2: Ch0"
-            SensorsDescription 12 = "NI-9219_2: Ch2"
+            SensorsDescription 12 = "NI-9219_2: Ch1"
-            SensorsDescription 13 = "NI-9219_2: Ch3"
+            SensorsDescription 13 = "NI-9219_2: Ch2"
-            SensorsDescription 14 = "NI-9219_2: Ch4"
+            SensorsDescription 14 = "NI-9219_2: Ch3"
             VoltageDescription.<size(s)> = "5 2"
-            VoltageDescription 0 = "NI-9215: Ch1"
+            VoltageDescription 0 = "NI-9215: Ch0"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
-            VoltageDescription 2 = "NI-9219_1: Ch3"
+            VoltageDescription 2 = "NI-9219_1: Ch2"
             VoltageDescription 3 = "Zero Flux- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             VoltageDescription 8 = ""
             VoltageDescription 9 = "Leistung [W]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
             [Hardware]
             SimulateDevices = False
             DI_E-Stop = ""
             DI_Setup = ""
             PowerSupply_VISAName = "TCPIP0::10.1.2.40::30000::SOCKET"
             PowerSupply_Address = "0"
             PowerSupply_Baudrate = "0"
             PowerSupply_OutputVoltage = "10,000000"
             PowerSupply_OverVoltageProtection = "9,800000"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             PowerSupply_WarningPower = "9000,000000"
             PowerSupply_AbortPower = "10000,000000"
             PowerSupply_PID = "FALSE"
             PowerSupply_PID_Time = "1,000000"
             PowerSupply_PID_ProportionalGain = "0,100000"
             PowerSupply_PID_IntegralTime = "0,180000"
             PowerSupply_PID_DerivativeTime = "0,000000"
             AbortCurrentDifference = "0,000000"
             Measurement_Channels.<size(s)> = "17"
             Measurement_Channels 0 = "NI9215/ai0"
             Measurement_Channels 1 = "NI9219_1/ai2"
             Measurement_Channels 2 = "NI9212/ai0"
             Measurement_Channels 3 = "NI9212/ai1"
             Measurement_Channels 4 = "NI9212/ai2"
             Measurement_Channels 5 = "NI9212/ai3"
             Measurement_Channels 6 = "NI9212/ai4"
             Measurement_Channels 7 = "NI9212/ai5"
             Measurement_Channels 8 = "NI9212/ai6"
             Measurement_Channels 9 = "NI9212/ai7"
             Measurement_Channels 10 = "NI9219_1/ai0"
             Measurement_Channels 11 = "NI9219_1/ai1"
             Measurement_Channels 12 = "NI9219_1/ai2"
             Measurement_Channels 13 = "NI9219_2/ai0"
             Measurement_Channels 14 = "NI9219_2/ai1"
             Measurement_Channels 15 = "NI9219_2/ai2"
             Measurement_Channels 16 = "NI9219_2/ai3"
             Measurement_Sample = "<size(s)=17> 40,000000 40,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000"
             ShuntResistance = "0,005"
             Measurement_Check = False
             Measurement_Delay = "1"
             DMM_VISAName = "NI9219_1/ai3"
             DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000"
             TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=5> 1,000000 -1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=5> 0,000000 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
             [HSMP2]
             DMM_Configuration.Maximum = "10500,000000"
             DMM_Configuration.Minimum = "0,000000"
             DMM_Configuration.Configuration = "4-Wire"
             DMM_Configuration.CurrentExcitationSource = "Internal"
             DMM_Configuration.CurrentExcitationValue = "0,000500"
             DMM_Sample = "40,000000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "10,000000"
             Configuration_AI_Voltage 0.Minimum = "-10,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "10,000000"
             Configuration_AI_Voltage 1.Minimum = "0,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "15"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "0,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "0,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "0,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "0,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "0,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "0,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "0,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "0,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "0,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "0,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 10.Maximum = "250,000000"
             Configuration_AI_Thermocouple 10.Minimum = "0,000000"
             Configuration_AI_Thermocouple 10.Type = "K"
             Configuration_AI_Thermocouple 10.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 10.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 11.Maximum = "250,000000"
             Configuration_AI_Thermocouple 11.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 11.Type = "K"
             Configuration_AI_Thermocouple 11.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 11.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 12.Maximum = "250,000000"
             Configuration_AI_Thermocouple 12.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 12.Type = "K"
             Configuration_AI_Thermocouple 12.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 12.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 13.Maximum = "250,000000"
             Configuration_AI_Thermocouple 13.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 13.Type = "K"
             Configuration_AI_Thermocouple 13.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 13.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 14.Maximum = "250,000000"
             Configuration_AI_Thermocouple 14.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 14.Type = "K"
             Configuration_AI_Thermocouple 14.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 14.CJC_Value = "25,000000"
             Configuration_AI_NI9219_Resistance.<size(s)> = "7"
             Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224E-3 2,31E-4 3,938074E-9"
             Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224E-3 2,31E-4 3,938074E-9"
             Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12"
             Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
             Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9"
             Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9"
             Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12"
             Configuration_AI_NI9219_Type.<size(s)> = "7"
             Configuration_AI_NI9219_Type 0 = "RTD"
             Configuration_AI_NI9219_Type 1 = "Resistance_Thermistor"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 4 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 5 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 6 = "Resistance_RTD"
             POS_Config.IP = "10.1.2.1"
             POS_Config.Port = "502"
             POS_AxesNames.<size(s)> = "3"
             POS_AxesNames 0 = "X"
             POS_AxesNames 1 = "Y"
             POS_AxesNames 2 = "Z"
             POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 308,000000"
             POS_Limits_Axis1 = "<size(s)=2> 0 155"
             POS_Limits_Axis2 = "<size(s)=2> 0 303"
             POS_Limits_Axis3 = "<size(s)=2> 0 309"
             POS_AxesFlipped.<size(s)> = "3"
             POS_AxesFlipped 0 = "True"
             POS_AxesFlipped 1 = "True"
             POS_AxesFlipped 2 = "False"
             Pos_MaxVelocity = "300"
             Pos_MaxAcceleration = "15000"
             Pos_MaxJerk = "140000"
             Pos_DO_E-Stop_Index = "0"
             Pos_DO_Setup_Index = "2"
             ForceLimit_Axis3 = "<size(s)=1> 0,000000"
             ForceLimit_Axis3_Text.<size(s)> = "1"
             ForceLimit_Axis3_Text 0 = ""
             ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 100,000000"
             ForceLimit_AI_Index = "0"
             AirCooling_AI_Index = "1"
+            AirCooling_AO_Index = "0"
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218"
             Sensors+.<size(s)> = "15"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "False"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             Sensors+ 10 = "False"
             Sensors+ 11 = "False"
             Sensors+ 12 = "False"
             Sensors+ 13 = "False"
             Sensors+ 14 = "False"
             SensorsFunction.<size(s)> = "15"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
             SensorsFunction 10 = "Temperatur 11"
             SensorsFunction 11 = "Temperatur 12"
             SensorsFunction 12 = "Temperatur 13"
             SensorsFunction 13 = "Temperatur 14"
             SensorsFunction 14 = "Temperatur 15"
             ForceLimit_Z = "0"
             MovingParameter.Velocity = "20,000000"
             MovingParameter.Acceleration = "50,000000"
             MovingParameter.Jerk = "140000,000000"
             Learning_Steps.X = "1,000000"
             Learning_Steps.Y = "1,000000"
             Learning_Steps.Z = "1,000000"
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
             Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport_%s.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
             [Protocol]
             ProtocolNameFormat = "%s_A%d_Report_%s.docx"
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
             ProtocolDataFolderName = "Bilder|Messungen"
             [StateMessages]
             Info.<size(s)> = "29"
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"
             Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"
             Info 16 = "Testprotokoll wird erstellt... Bitte warten"
             Info 17 = "Testprotokoll erstellt"
             Info 18 = "Der letzte Test ist geladen..."
             Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen"
             Info 20 = "Testbericht wird erstellt... Bitte warten"
             Info 21 = "Testbericht erstellt"
             Info 22 = "Test ist gespeichert"
             Info 23 = "Achsen werden initialisiert..."
             Info 24 = "Referenzfahrt l�uft..."
             Info 25 = "X-Achse wird referenziert..."
             Info 26 = "Y-Achse wird referenziert..."
             Info 27 = "Z-Achse wird referenziert..."
             Info 28 = "Position wird angefahren..."
             Result.<size(s)> = "29"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Pr�fung Stop"
             Result 15 = "Pr�fung Stop"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
             Result 18 = "Bereit"
             Result 19 = "Bereit"
             Result 20 = "Bereit"
             Result 21 = "Bereit"
             Result 22 = "Bereit"
             Result 23 = ""
             Result 24 = "Einrichtbetrieb"
             Result 25 = "Einrichtbetrieb"
             Result 26 = "Einrichtbetrieb"
             Result 27 = "Einrichtbetrieb"
             Result 28 = "Einrichtbetrieb"
             [DialogMessages]
             Messages.<size(s)> = "8"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind"
             Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind"
             Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"
             Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
             Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
             Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
             Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."

CurrentTester [LabVIEW]/Initialization_HSMP2.ini +18 -17

             [Tester]
             TesterType = "HSMP2"
             TesterName = "Hochstrommessplatz 2"
             MaxCurrent = 1000
             MaxTemperature = 250
             MaxAmbientTemperature = 50
             TemperatureWarning- = 10
             SensorsEnable.<size(s)> = "15"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "True"
             SensorsEnable 6 = "True"
             SensorsEnable 7 = "True"
             SensorsEnable 8 = "True"
             SensorsEnable 9 = "True"
             SensorsEnable 10 = "False"
             SensorsEnable 11 = "False"
             SensorsEnable 12 = "False"
             SensorsEnable 13 = "False"
             SensorsEnable 14 = "False"
             SensorsDescription.<size(s)> = "15"
-            SensorsDescription 0 = "NI-9212: Ch1"
+            SensorsDescription 0 = "NI-9212: Ch0"
-            SensorsDescription 1 = "NI-9212: Ch2"
+            SensorsDescription 1 = "NI-9212: Ch1"
-            SensorsDescription 2 = "NI-9212: Ch3"
+            SensorsDescription 2 = "NI-9212: Ch2"
-            SensorsDescription 3 = "NI-9212: Ch4"
+            SensorsDescription 3 = "NI-9212: Ch3"
-            SensorsDescription 4 = "NI-9212: Ch5"
+            SensorsDescription 4 = "NI-9212: Ch4"
-            SensorsDescription 5 = "NI-9212: Ch6"
+            SensorsDescription 5 = "NI-9212: Ch5"
-            SensorsDescription 6 = "NI-9212: Ch7"
+            SensorsDescription 6 = "NI-9212: Ch6"
-            SensorsDescription 7 = "NI-9212: Ch8"
+            SensorsDescription 7 = "NI-9212: Ch7"
-            SensorsDescription 8 = "NI-9219_1: Ch1"
+            SensorsDescription 8 = "NI-9219_1: Ch0"
-            SensorsDescription 9 = "NI-9219_1: Ch2"
+            SensorsDescription 9 = "NI-9219_1: Ch1"
-            SensorsDescription 10 = "NI-9219_1: Ch3"
+            SensorsDescription 10 = "NI-9219_1: Ch2"
-            SensorsDescription 11 = "NI-9219_2: Ch1"
+            SensorsDescription 11 = "NI-9219_2: Ch0"
-            SensorsDescription 12 = "NI-9219_2: Ch2"
+            SensorsDescription 12 = "NI-9219_2: Ch1"
-            SensorsDescription 13 = "NI-9219_2: Ch3"
+            SensorsDescription 13 = "NI-9219_2: Ch2"
-            SensorsDescription 14 = "NI-9219_2: Ch4"
+            SensorsDescription 14 = "NI-9219_2: Ch3"
             VoltageDescription.<size(s)> = "5 2"
-            VoltageDescription 0 = "NI-9215: Ch1"
+            VoltageDescription 0 = "NI-9215: Ch0"
             VoltageDescription 1 = "Pr�flingsspannung [V]"
-            VoltageDescription 2 = "NI-9219_1: Ch3"
+            VoltageDescription 2 = "NI-9219_1: Ch2"
             VoltageDescription 3 = "Zero Flux- Spannung [V]"
             VoltageDescription 4 = ""
             VoltageDescription 5 = "Strom [A]"
             VoltageDescription 6 = ""
             VoltageDescription 7 = "Widerstand [mOhm]"
             VoltageDescription 8 = ""
             VoltageDescription 9 = "Leistung [W]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
             [Hardware]
             SimulateDevices = False
             DI_E-Stop = ""
             DI_Setup = ""
             PowerSupply_VISAName = "TCPIP0::10.1.2.40::30000::SOCKET"
             PowerSupply_Address = "0"
             PowerSupply_Baudrate = "0"
             PowerSupply_OutputVoltage = "10,000000"
             PowerSupply_OverVoltageProtection = "9,800000"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             PowerSupply_WarningPower = "9000,000000"
             PowerSupply_AbortPower = "10000,000000"
             PowerSupply_PID = "FALSE"
             PowerSupply_PID_Time = "1,000000"
             PowerSupply_PID_ProportionalGain = "0,100000"
             PowerSupply_PID_IntegralTime = "0,180000"
             PowerSupply_PID_DerivativeTime = "0,000000"
             AbortCurrentDifference = "0,000000"
             Measurement_Channels.<size(s)> = "17"
             Measurement_Channels 0 = "NI9215/ai0"
             Measurement_Channels 1 = "NI9219_1/ai2"
             Measurement_Channels 2 = "NI9212/ai0"
             Measurement_Channels 3 = "NI9212/ai1"
             Measurement_Channels 4 = "NI9212/ai2"
             Measurement_Channels 5 = "NI9212/ai3"
             Measurement_Channels 6 = "NI9212/ai4"
             Measurement_Channels 7 = "NI9212/ai5"
             Measurement_Channels 8 = "NI9212/ai6"
             Measurement_Channels 9 = "NI9212/ai7"
             Measurement_Channels 10 = "NI9219_1/ai0"
             Measurement_Channels 11 = "NI9219_1/ai1"
             Measurement_Channels 12 = "NI9219_1/ai2"
             Measurement_Channels 13 = "NI9219_2/ai0"
             Measurement_Channels 14 = "NI9219_2/ai1"
             Measurement_Channels 15 = "NI9219_2/ai2"
             Measurement_Channels 16 = "NI9219_2/ai3"
             Measurement_Sample = "<size(s)=17> 40,000000 40,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000"
             ShuntResistance = "0,005"
             Measurement_Check = False
             Measurement_Delay = "1"
             DMM_VISAName = "NI9219_1/ai3"
             DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000"
             TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=5> 1,000000 -1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=5> 0,000000 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
             [HSMP2]
             DMM_Configuration.Maximum = "10500,000000"
             DMM_Configuration.Minimum = "0,000000"
             DMM_Configuration.Configuration = "4-Wire"
             DMM_Configuration.CurrentExcitationSource = "Internal"
             DMM_Configuration.CurrentExcitationValue = "0,000500"
             DMM_Sample = "40,000000"
             Configuration_AI_Voltage.<size(s)> = "2"
             Configuration_AI_Voltage 0.Maximum = "10,000000"
             Configuration_AI_Voltage 0.Minimum = "-10,000000"
             Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
             Configuration_AI_Voltage 1.Maximum = "10,000000"
             Configuration_AI_Voltage 1.Minimum = "0,000000"
             Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
             Configuration_AI_Thermocouple.<size(s)> = "15"
             Configuration_AI_Thermocouple 0.Maximum = "250,000000"
             Configuration_AI_Thermocouple 0.Minimum = "0,000000"
             Configuration_AI_Thermocouple 0.Type = "K"
             Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 1.Maximum = "250,000000"
             Configuration_AI_Thermocouple 1.Minimum = "0,000000"
             Configuration_AI_Thermocouple 1.Type = "K"
             Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 2.Maximum = "250,000000"
             Configuration_AI_Thermocouple 2.Minimum = "0,000000"
             Configuration_AI_Thermocouple 2.Type = "K"
             Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 3.Maximum = "250,000000"
             Configuration_AI_Thermocouple 3.Minimum = "0,000000"
             Configuration_AI_Thermocouple 3.Type = "K"
             Configuration_AI_Thermocouple 3.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 4.Maximum = "250,000000"
             Configuration_AI_Thermocouple 4.Minimum = "0,000000"
             Configuration_AI_Thermocouple 4.Type = "K"
             Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 5.Maximum = "250,000000"
             Configuration_AI_Thermocouple 5.Minimum = "0,000000"
             Configuration_AI_Thermocouple 5.Type = "K"
             Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 6.Maximum = "250,000000"
             Configuration_AI_Thermocouple 6.Minimum = "0,000000"
             Configuration_AI_Thermocouple 6.Type = "K"
             Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 7.Maximum = "250,000000"
             Configuration_AI_Thermocouple 7.Minimum = "0,000000"
             Configuration_AI_Thermocouple 7.Type = "K"
             Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 8.Maximum = "250,000000"
             Configuration_AI_Thermocouple 8.Minimum = "0,000000"
             Configuration_AI_Thermocouple 8.Type = "K"
             Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 9.Maximum = "250,000000"
             Configuration_AI_Thermocouple 9.Minimum = "0,000000"
             Configuration_AI_Thermocouple 9.Type = "K"
             Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 10.Maximum = "250,000000"
             Configuration_AI_Thermocouple 10.Minimum = "0,000000"
             Configuration_AI_Thermocouple 10.Type = "K"
             Configuration_AI_Thermocouple 10.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 10.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 11.Maximum = "250,000000"
             Configuration_AI_Thermocouple 11.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 11.Type = "K"
             Configuration_AI_Thermocouple 11.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 11.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 12.Maximum = "250,000000"
             Configuration_AI_Thermocouple 12.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 12.Type = "K"
             Configuration_AI_Thermocouple 12.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 12.CJC_Value = "25,000000"
             Configuration_AI_Thermocouple 13.Maximum = "250,000000"
             Configuration_AI_Thermocouple 13.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 13.Type = "K"
             Configuration_AI_Thermocouple 13.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 13.CJC_Value = "10,000000"
             Configuration_AI_Thermocouple 14.Maximum = "250,000000"
             Configuration_AI_Thermocouple 14.Minimum = "-200,000000"
             Configuration_AI_Thermocouple 14.Type = "K"
             Configuration_AI_Thermocouple 14.CJC_Source = "Built-In"
             Configuration_AI_Thermocouple 14.CJC_Value = "25,000000"
             Configuration_AI_NI9219_Resistance.<size(s)> = "7"
             Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000"
             Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224E-3 2,31E-4 3,938074E-9"
             Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224E-3 2,31E-4 3,938074E-9"
             Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12"
             Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
             Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000"
             Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9"
             Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9"
             Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000"
             Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000"
             Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire"
             Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal"
             Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500"
             Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750"
             Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000"
             Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12"
             Configuration_AI_NI9219_Type.<size(s)> = "7"
             Configuration_AI_NI9219_Type 0 = "RTD"
             Configuration_AI_NI9219_Type 1 = "Resistance_Thermistor"
             Configuration_AI_NI9219_Type 2 = "Thermocouple"
             Configuration_AI_NI9219_Type 3 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 4 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 5 = "Resistance_RTD"
             Configuration_AI_NI9219_Type 6 = "Resistance_RTD"
             POS_Config.IP = "10.1.2.1"
             POS_Config.Port = "502"
             POS_AxesNames.<size(s)> = "3"
             POS_AxesNames 0 = "X"
             POS_AxesNames 1 = "Y"
             POS_AxesNames 2 = "Z"
             POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 308,000000"
             POS_Limits_Axis1 = "<size(s)=2> 0 155"
             POS_Limits_Axis2 = "<size(s)=2> 0 303"
             POS_Limits_Axis3 = "<size(s)=2> 0 309"
             POS_AxesFlipped.<size(s)> = "3"
             POS_AxesFlipped 0 = "True"
             POS_AxesFlipped 1 = "True"
             POS_AxesFlipped 2 = "False"
             Pos_MaxVelocity = "300"
             Pos_MaxAcceleration = "15000"
             Pos_MaxJerk = "140000"
             Pos_DO_E-Stop_Index = "0"
             Pos_DO_Setup_Index = "2"
             ForceLimit_Axis3 = "<size(s)=1> 0,000000"
             ForceLimit_Axis3_Text.<size(s)> = "1"
             ForceLimit_Axis3_Text 0 = ""
             ForceLimit_Axis3_AO_Limits = "<size(s)=2> 0,000000 100,000000"
             ForceLimit_AI_Index = "0"
             AirCooling_AI_Index = "1"
+            AirCooling_AO_Index = "0"
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218"
             Sensors+.<size(s)> = "15"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "False"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             Sensors+ 10 = "False"
             Sensors+ 11 = "False"
             Sensors+ 12 = "False"
             Sensors+ 13 = "False"
             Sensors+ 14 = "False"
             SensorsFunction.<size(s)> = "15"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
             SensorsFunction 10 = "Temperatur 11"
             SensorsFunction 11 = "Temperatur 12"
             SensorsFunction 12 = "Temperatur 13"
             SensorsFunction 13 = "Temperatur 14"
             SensorsFunction 14 = "Temperatur 15"
             ForceLimit_Z = "0"
             MovingParameter.Velocity = "20,000000"
             MovingParameter.Acceleration = "50,000000"
             MovingParameter.Jerk = "140000,000000"
             Learning_Steps.X = "1,000000"
             Learning_Steps.Y = "1,000000"
             Learning_Steps.Z = "1,000000"
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2"
             ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
             Applicants = "C:\Work\CurrentTester\support\Applicants.txt"
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport_%s.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
             [Protocol]
             ProtocolNameFormat = "%s_A%d_Report_%s.docx"
             ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
             ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
             ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
             ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
             ProtocolDataFolderName = "Bilder|Messungen"
             [StateMessages]
             Info.<size(s)> = "29"
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"
             Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"
             Info 16 = "Testprotokoll wird erstellt... Bitte warten"
             Info 17 = "Testprotokoll erstellt"
             Info 18 = "Der letzte Test ist geladen..."
             Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen"
             Info 20 = "Testbericht wird erstellt... Bitte warten"
             Info 21 = "Testbericht erstellt"
             Info 22 = "Test ist gespeichert"
             Info 23 = "Achsen werden initialisiert..."
             Info 24 = "Referenzfahrt l�uft..."
             Info 25 = "X-Achse wird referenziert..."
             Info 26 = "Y-Achse wird referenziert..."
             Info 27 = "Z-Achse wird referenziert..."
             Info 28 = "Position wird angefahren..."
             Result.<size(s)> = "29"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Pr�fung Stop"
             Result 15 = "Pr�fung Stop"
             Result 16 = "Bereit"
             Result 17 = "Bereit"
             Result 18 = "Bereit"
             Result 19 = "Bereit"
             Result 20 = "Bereit"
             Result 21 = "Bereit"
             Result 22 = "Bereit"
             Result 23 = ""
             Result 24 = "Einrichtbetrieb"
             Result 25 = "Einrichtbetrieb"
             Result 26 = "Einrichtbetrieb"
             Result 27 = "Einrichtbetrieb"
             Result 28 = "Einrichtbetrieb"
             [DialogMessages]
             Messages.<size(s)> = "8"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind"
             Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind"
             Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"
             Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus"
             Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt"
             Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt"
             Messages 7 = "Die Merkzetteldaten werden gel�scht!\0ABitte best�tigen Sie die Operation oder schlie�en Sie das Dialogfeld, um den Vorgang abzubrechen ..."

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cSystem.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckE-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ClearNotepad.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogError.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogProtocol.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetReportName.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetTemperatureSensorsType.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Finish.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Start.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Init.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadChildClass.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadStandardValues.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PerformMeasurements.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_GetProtocolName.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SaveTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Setup_GetCurrent.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Simulation.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvInfo.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvPosition.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvSystem.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/DisplayResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Config.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Resistance.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Temperatures.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Setup_Config_Voltages.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldResults.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/CTLs/cHSMP2.ctl 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ControlLearningButtons.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Init_AxesControl.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_DisableAxes.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_GetPosition.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PositioningUnit_Move.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_Close.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_GetCurrent.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_GetPower.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_Init.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_Reset.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/PowerSupply_SetCurrent.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/ReadE-Stop.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Resistance.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Temperatures.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/Setup_Config_Voltages.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateAxes.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/UpdateForceLimit.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WriteForceLimit.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/OverrideVIs/WritePressure.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/GetDigOuts.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/GetPosition.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/VisualiseInsetData.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/SubVIs/WriteAO.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP2/class_HSMP2.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_PowerSupply.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Resistance.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Temperatures.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Voltages.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldResults.vi 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/CurrentTester.exe 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization_HSMP2.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

support/User.txt 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

General Comments 0

Write
Preview

You need to be logged in to leave comments. Login now

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages