Show More
The requested changes are too big and content was truncated. Show full diff
| 1 | NO CONTENT: new file 10644 |
|
NO CONTENT: new file 10644 |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| @@ -1,329 +1,441 | |||||
| 1 | [Tester] No newline at end of file |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP2" No newline at end of file |
|
2 | TesterType = "HSMP2" | |
| 3 | TesterName = "Hochstrommessplatz 2" No newline at end of file |
|
3 | TesterName = "Hochstrommessplatz 2" | |
| 4 | MaxCurrent = 2000 No newline at end of file |
|
4 | MaxCurrent = 2000 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| No newline at end of file |
|
6 | SensorsEnable.<size(s)> = "15" No newline at end of file | ||
| 6 | SensorsEnable.<size(s)> = "10" No newline at end of file |
|
|||
| 7 | SensorsEnable 0 = "True" No newline at end of file |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" No newline at end of file |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" No newline at end of file |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" No newline at end of file |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" No newline at end of file |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" No newline at end of file |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" No newline at end of file |
|
13 | SensorsEnable 6 = "True" | |
| 14 | SensorsEnable 7 = "False" No newline at end of file |
|
14 | SensorsEnable 7 = "False" | |
| 15 | SensorsEnable 8 = "False" No newline at end of file |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| No newline at end of file |
|
17 | SensorsEnable 10 = "False" | ||
| 17 | SensorsDescription.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
22 | SensorsDescription.<size(s)> = "15" No newline at end of file | |||
| 18 | SensorsDescription 0 = "NI-9212: Ch1" No newline at end of file |
|
23 | SensorsDescription 0 = "NI-9212: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9212: Ch2" No newline at end of file |
|
24 | SensorsDescription 1 = "NI-9212: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9212: Ch3" No newline at end of file |
|
25 | SensorsDescription 2 = "NI-9212: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9212: Ch4" |
|
26 | SensorsDescription 3 = "NI-9212: Ch4" | |
| No newline at end of file |
|
27 | SensorsDescription 4 = "NI-9219_1: Ch1" | ||
| 22 | SensorsDescription 4 = "NI-9219: Ch1" |
|
No newline at end of file | ||
| No newline at end of file |
|
28 | SensorsDescription 5 = "NI-9219_1: Ch2" | ||
| 23 | SensorsDescription 5 = "NI-9219: Ch2" |
|
No newline at end of file | ||
| No newline at end of file |
|
29 | SensorsDescription 6 = "NI-9219_1: Ch3" | ||
| 24 | SensorsDescription 6 = "NI-9219: Ch3" |
|
No newline at end of file | ||
| No newline at end of file |
|
30 | SensorsDescription 7 = "NI-9219_2: Ch1" | ||
| 25 | SensorsDescription 7 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
31 | SensorsDescription 8 = "NI-9219_2: Ch2" | ||
| 26 | SensorsDescription 8 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
32 | SensorsDescription 9 = "NI-9219_2: Ch3" | ||
| 27 | SensorsDescription 9 = "" No newline at end of file |
|
No newline at end of file | ||
|
|
33 | SensorsDescription 10 = "NI-9219_2: Ch4" | |||
|
|
No newline at end of file | ||||
|
|
34 | SensorsDescription 11 = "NI-9219_3: Ch1" | |||
|
|
No newline at end of file | ||||
|
|
35 | SensorsDescription 12 = "NI-9219_3: Ch2" | |||
|
|
No newline at end of file | ||||
|
|
36 | SensorsDescription 13 = "NI-9219_3: Ch3" | |||
|
|
No newline at end of file | ||||
|
|
37 | SensorsDescription 14 = "NI-9219_3: Ch4" No newline at end of file | |||
| 28 | VoltageDescription.<size(s)> = "4 2" No newline at end of file |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI-9215: Ch1" No newline at end of file |
|
39 | VoltageDescription 0 = "NI-9215: Ch1" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" No newline at end of file |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI-9215: Ch2" No newline at end of file |
|
41 | VoltageDescription 2 = "NI-9215: Ch2" | |
| 32 | VoltageDescription 3 = "Zero Flux- Spannung [V]" No newline at end of file |
|
42 | VoltageDescription 3 = "Zero Flux- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" No newline at end of file |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" No newline at end of file |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" No newline at end of file |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" No newline at end of file |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" No newline at end of file |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 | No newline at end of file |
|
48 | ||
| 39 | [Hardware] No newline at end of file |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True No newline at end of file |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "" No newline at end of file |
|
51 | DI_E-Stop = "" | |
| 42 | DI_Setup = "" No newline at end of file |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM4" No newline at end of file |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "0" No newline at end of file |
|
54 | PowerSupply_Address = "0" | |
| 45 | PowerSupply_Baudrate = "9600" No newline at end of file |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "10,000000" No newline at end of file |
|
56 | PowerSupply_OutputVoltage = "10,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,800000" No newline at end of file |
|
57 | PowerSupply_OverVoltageProtection = "9,800000" | |
| 48 | PowerSupply_MinCurrent = "0" No newline at end of file |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False No newline at end of file |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "18000,000000" No newline at end of file |
|
60 | PowerSupply_WarningPower = "18000,000000" | |
| 51 | PowerSupply_AbortPower = "20000,000000" No newline at end of file |
|
61 | PowerSupply_AbortPower = "20000,000000" | |
| 52 | PowerSupply_PID = "FALSE" No newline at end of file |
|
62 | PowerSupply_PID = "FALSE" | |
| 53 | PowerSupply_PID_Time = "0,100000" No newline at end of file |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" No newline at end of file |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" No newline at end of file |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" No newline at end of file |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0,000000" |
|
67 | AbortCurrentDifference = "0,000000" | |
| No newline at end of file |
|
68 | Measurement_Channels.<size(s)> = "17" No newline at end of file | ||
| 58 | Measurement_Channels.<size(s)> = "13" No newline at end of file |
|
|||
| 59 | Measurement_Channels 0 = "NI9215/ai0" No newline at end of file |
|
69 | Measurement_Channels 0 = "NI9215/ai0" | |
| 60 | Measurement_Channels 1 = "NI9215/ai1" No newline at end of file |
|
70 | Measurement_Channels 1 = "NI9215/ai1" | |
| 61 | Measurement_Channels 2 = "NI9212/ai0" No newline at end of file |
|
71 | Measurement_Channels 2 = "NI9212/ai0" | |
| 62 | Measurement_Channels 3 = "NI9212/ai1" No newline at end of file |
|
72 | Measurement_Channels 3 = "NI9212/ai1" | |
| 63 | Measurement_Channels 4 = "NI9212/ai2" No newline at end of file |
|
73 | Measurement_Channels 4 = "NI9212/ai2" | |
| 64 | Measurement_Channels 5 = "NI9212/ai3" |
|
74 | Measurement_Channels 5 = "NI9212/ai3" | |
| No newline at end of file |
|
75 | Measurement_Channels 6 = "NI9219_1/ai0" | ||
| 65 | Measurement_Channels 6 = "NI9219/ai0" |
|
No newline at end of file | ||
| No newline at end of file |
|
76 | Measurement_Channels 7 = "NI9219_1/ai1" | ||
| 66 | Measurement_Channels 7 = "NI9219/ai1" |
|
No newline at end of file | ||
| No newline at end of file |
|
77 | Measurement_Channels 8 = "NI9219_1/ai2" | ||
| 67 | Measurement_Channels 8 = "NI9219/ai2" |
|
No newline at end of file | ||
| No newline at end of file |
|
78 | Measurement_Channels 9 = "NI9219_2/ai0" | ||
| 68 | Measurement_Channels 9 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
79 | Measurement_Channels 10 = "NI9219_2/ai1" | ||
| 69 | Measurement_Channels 10 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
80 | Measurement_Channels 11 = "NI9219_2/ai2" | ||
| 70 | Measurement_Channels 11 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
81 | Measurement_Channels 12 = "NI9219_2/ai3" | ||
| 71 | Measurement_Channels 12 = "" No newline at end of file |
|
No newline at end of file | ||
|
|
82 | Measurement_Channels 13 = "NI9219_3/ai0" | |||
|
|
No newline at end of file | ||||
|
|
83 | Measurement_Channels 14 = "NI9219_3/ai1" | |||
|
|
No newline at end of file | ||||
|
|
84 | Measurement_Channels 15 = "NI9219_3/ai2" | |||
|
|
No newline at end of file | ||||
|
|
85 | Measurement_Channels 16 = "NI9219_3/ai3" No newline at end of file | |||
| 72 | ShuntResistance = "0,005" No newline at end of file |
|
86 | ShuntResistance = "0,005" | |
| 73 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| No newline at end of file |
|
88 | DMM_VISAName = "NI9219_1/ai3" No newline at end of file | ||
| 74 | DMM_VISAName = "NI9219/ai3" No newline at end of file |
|
|||
| 75 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" | |
| No newline at end of file |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | ||
| 76 | TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file | ||
| 77 | TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
|||
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" No newline at end of file |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" No newline at end of file |
|
94 | AllowedContactFails = "2" | |
| 81 | No newline at end of file |
|
95 | ||
| 82 | [HSMP2] No newline at end of file |
|
96 | [HSMP2] | |
| 83 | DMM_Configuration.Maximum = "10,000000" No newline at end of file |
|
97 | DMM_Configuration.Maximum = "10,000000" | |
| 84 | DMM_Configuration.Minimum = "0,000000" No newline at end of file |
|
98 | DMM_Configuration.Minimum = "0,000000" | |
| 85 | DMM_Configuration.Configuration = "2-Wire" No newline at end of file |
|
99 | DMM_Configuration.Configuration = "2-Wire" | |
| 86 | DMM_Configuration.CurrentExcitationSource = "Internal" No newline at end of file |
|
100 | DMM_Configuration.CurrentExcitationSource = "Internal" | |
| 87 | DMM_Configuration.CurrentExcitationValue = "0,000500" No newline at end of file |
|
101 | DMM_Configuration.CurrentExcitationValue = "0,000500" | |
| 88 | Configuration_AI_Voltage.<size(s)> = "2" No newline at end of file |
|
102 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 89 | Configuration_AI_Voltage 0.Maximum = "10,000000" No newline at end of file |
|
103 | Configuration_AI_Voltage 0.Maximum = "10,000000" | |
| 90 | Configuration_AI_Voltage 0.Minimum = "-10,000000" No newline at end of file |
|
104 | Configuration_AI_Voltage 0.Minimum = "-10,000000" | |
| 91 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" No newline at end of file |
|
105 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 92 | Configuration_AI_Voltage 1.Maximum = "10,000000" No newline at end of file |
|
106 | Configuration_AI_Voltage 1.Maximum = "10,000000" | |
| 93 | Configuration_AI_Voltage 1.Minimum = "0,000000" No newline at end of file |
|
107 | Configuration_AI_Voltage 1.Minimum = "0,000000" | |
| 94 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
108 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| No newline at end of file |
|
109 | Configuration_AI_Thermocouple.<size(s)> = "15" No newline at end of file | ||
| 95 | Configuration_AI_Thermocouple.<size(s)> = "10" No newline at end of file |
|
|||
| 96 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" No newline at end of file |
|
110 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 97 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" No newline at end of file |
|
111 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 98 | Configuration_AI_Thermocouple 0.Type = "K" No newline at end of file |
|
112 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 99 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" No newline at end of file |
|
113 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 100 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" No newline at end of file |
|
114 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" No newline at end of file |
|
115 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 102 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" No newline at end of file |
|
116 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 103 | Configuration_AI_Thermocouple 1.Type = "K" No newline at end of file |
|
117 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 104 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" No newline at end of file |
|
118 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 105 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" No newline at end of file |
|
119 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" No newline at end of file |
|
120 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 107 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" No newline at end of file |
|
121 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 108 | Configuration_AI_Thermocouple 2.Type = "K" No newline at end of file |
|
122 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 109 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" No newline at end of file |
|
123 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 110 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" No newline at end of file |
|
124 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" No newline at end of file |
|
125 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 112 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" No newline at end of file |
|
126 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 113 | Configuration_AI_Thermocouple 3.Type = "K" No newline at end of file |
|
127 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 114 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" No newline at end of file |
|
128 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 115 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" No newline at end of file |
|
129 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" No newline at end of file |
|
130 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 117 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" No newline at end of file |
|
131 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 118 | Configuration_AI_Thermocouple 4.Type = "K" No newline at end of file |
|
132 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 119 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" No newline at end of file |
|
133 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 120 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" No newline at end of file |
|
134 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" No newline at end of file |
|
135 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 122 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" No newline at end of file |
|
136 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 123 | Configuration_AI_Thermocouple 5.Type = "K" No newline at end of file |
|
137 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 124 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" No newline at end of file |
|
138 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 125 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" No newline at end of file |
|
139 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" No newline at end of file |
|
140 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 127 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" No newline at end of file |
|
141 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 128 | Configuration_AI_Thermocouple 6.Type = "K" No newline at end of file |
|
142 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 129 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" No newline at end of file |
|
143 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 130 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" No newline at end of file |
|
144 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" No newline at end of file |
|
145 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 132 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" No newline at end of file |
|
146 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 133 | Configuration_AI_Thermocouple 7.Type = "K" No newline at end of file |
|
147 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 134 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" No newline at end of file |
|
148 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 135 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" No newline at end of file |
|
149 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| 136 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" No newline at end of file |
|
150 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" | |
| 137 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" No newline at end of file |
|
151 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" | |
| 138 | Configuration_AI_Thermocouple 8.Type = "K" No newline at end of file |
|
152 | Configuration_AI_Thermocouple 8.Type = "K" | |
| 139 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" No newline at end of file |
|
153 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" | |
| 140 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" No newline at end of file |
|
154 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" | |
| 141 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" No newline at end of file |
|
155 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" | |
| 142 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" No newline at end of file |
|
156 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" | |
| 143 | Configuration_AI_Thermocouple 9.Type = "K" No newline at end of file |
|
157 | Configuration_AI_Thermocouple 9.Type = "K" | |
| 144 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" No newline at end of file |
|
158 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" | |
| 145 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" |
|
159 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" | |
| No newline at end of file |
|
160 | Configuration_AI_Thermocouple 10.Maximum = "250,000000" | ||
| 146 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" |
|
No newline at end of file | ||
| No newline at end of file |
|
161 | Configuration_AI_Thermocouple 10.Minimum = "-200,000000" | ||
| 147 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" No newline at end of file |
|
No newline at end of file | ||
|
|
162 | Configuration_AI_Thermocouple 10.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
163 | Configuration_AI_Thermocouple 10.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
164 | Configuration_AI_Thermocouple 10.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
165 | Configuration_AI_Thermocouple 11.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
166 | Configuration_AI_Thermocouple 11.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
167 | Configuration_AI_Thermocouple 11.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
168 | Configuration_AI_Thermocouple 11.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
169 | Configuration_AI_Thermocouple 11.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
170 | Configuration_AI_Thermocouple 12.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
171 | Configuration_AI_Thermocouple 12.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
172 | Configuration_AI_Thermocouple 12.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
173 | Configuration_AI_Thermocouple 12.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
174 | Configuration_AI_Thermocouple 12.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
175 | Configuration_AI_Thermocouple 13.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
176 | Configuration_AI_Thermocouple 13.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
177 | Configuration_AI_Thermocouple 13.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
178 | Configuration_AI_Thermocouple 13.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
179 | Configuration_AI_Thermocouple 13.CJC_Value = "10,000000" | |||
|
|
No newline at end of file | ||||
|
|
180 | Configuration_AI_Thermocouple 14.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
181 | Configuration_AI_Thermocouple 14.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
182 | Configuration_AI_Thermocouple 14.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
183 | Configuration_AI_Thermocouple 14.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
184 | Configuration_AI_Thermocouple 14.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
185 | Configuration_AI_NI9219_Resistance.<size(s)> = "11" | |||
|
|
No newline at end of file | ||||
|
|
186 | Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000" No newline at end of file | |||
| 148 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" |
|
187 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| No newline at end of file |
|
188 | Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire" No newline at end of file | ||
| 149 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" No newline at end of file |
|
|||
| 150 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" No newline at end of file |
|
189 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 151 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" No newline at end of file |
|
190 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 152 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" No newline at end of file |
|
191 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 153 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" No newline at end of file |
|
192 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
193 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
194 | Configuration_AI_NI9219_Resistance 1.Maximum = "800,000000" | ||
| 155 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
195 | Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000" | ||
| 156 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
196 | Configuration_AI_NI9219_Resistance 1.Configuration = "4-Wire" No newline at end of file | ||
| 157 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" No newline at end of file |
|
|||
| 158 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" No newline at end of file |
|
197 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 159 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" No newline at end of file |
|
198 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 160 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" No newline at end of file |
|
199 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 161 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" No newline at end of file |
|
200 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
201 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
202 | Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000" | ||
| 163 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
203 | Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000" No newline at end of file | ||
| 164 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" No newline at end of file |
|
|||
| 165 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" No newline at end of file |
|
204 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 166 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" No newline at end of file |
|
205 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 167 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" No newline at end of file |
|
206 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 168 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" No newline at end of file |
|
207 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 169 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" No newline at end of file |
|
208 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" No newline at end of file |
|
209 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" |
|
210 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| No newline at end of file |
|
211 | Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000" No newline at end of file | ||
| 172 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" No newline at end of file |
|
|||
| 173 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" No newline at end of file |
|
212 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 174 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" No newline at end of file |
|
213 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 175 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" No newline at end of file |
|
214 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 176 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" No newline at end of file |
|
215 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 177 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" No newline at end of file |
|
216 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 178 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
217 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
218 | Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000" | ||
| 179 | Configuration_AI_NI9219_Type.<size(s)> = "4" |
|
No newline at end of file | ||
| No newline at end of file |
|
219 | Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000" | ||
| 180 | Configuration_AI_NI9219_Type 0 = "Thermocouple" |
|
No newline at end of file | ||
| No newline at end of file |
|
220 | Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire" | ||
| 181 | Configuration_AI_NI9219_Type 1 = "Resistance_RTD" |
|
No newline at end of file | ||
| No newline at end of file |
|
221 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal" | ||
| 182 | Configuration_AI_NI9219_Type 2 = "Resistance_Thermistor" |
|
No newline at end of file | ||
| No newline at end of file |
|
222 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500" | ||
| 183 | Configuration_AI_NI9219_Type 3 = "Thermocouple" No newline at end of file |
|
No newline at end of file | ||
|
|
223 | Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
224 | Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
225 | Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
226 | Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
227 | Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
228 | Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
229 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
230 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
231 | Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
232 | Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
233 | Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
234 | Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
235 | Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
236 | Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
237 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
238 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
239 | Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
240 | Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
241 | Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
No newline at end of file | ||||
|
|
242 | Configuration_AI_NI9219_Resistance 7.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
243 | Configuration_AI_NI9219_Resistance 7.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
244 | Configuration_AI_NI9219_Resistance 7.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
245 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
246 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
247 | Configuration_AI_NI9219_Resistance 7.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
248 | Configuration_AI_NI9219_Resistance 7.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
249 | Configuration_AI_NI9219_Resistance 7.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
250 | Configuration_AI_NI9219_Resistance 8.Maximum = "200,000000" | |||
|
|
No newline at end of file | ||||
|
|
251 | Configuration_AI_NI9219_Resistance 8.Minimum = "-10,000000" | |||
|
|
No newline at end of file | ||||
|
|
252 | Configuration_AI_NI9219_Resistance 8.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
253 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
254 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
255 | Configuration_AI_NI9219_Resistance 8.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
256 | Configuration_AI_NI9219_Resistance 8.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
257 | Configuration_AI_NI9219_Resistance 8.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
258 | Configuration_AI_NI9219_Resistance 9.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
259 | Configuration_AI_NI9219_Resistance 9.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
260 | Configuration_AI_NI9219_Resistance 9.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
261 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
262 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
263 | Configuration_AI_NI9219_Resistance 9.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
264 | Configuration_AI_NI9219_Resistance 9.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
265 | Configuration_AI_NI9219_Resistance 9.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
266 | Configuration_AI_NI9219_Resistance 10.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
267 | Configuration_AI_NI9219_Resistance 10.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
268 | Configuration_AI_NI9219_Resistance 10.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
269 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
270 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
271 | Configuration_AI_NI9219_Resistance 10.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
272 | Configuration_AI_NI9219_Resistance 10.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
273 | Configuration_AI_NI9219_Resistance 10.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
No newline at end of file | ||||
|
|
274 | Configuration_AI_NI9219_Type.<size(s)> = "11" | |||
|
|
No newline at end of file | ||||
|
|
275 | Configuration_AI_NI9219_Type 0 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
276 | Configuration_AI_NI9219_Type 1 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
277 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" | |||
|
|
No newline at end of file | ||||
|
|
278 | Configuration_AI_NI9219_Type 3 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
279 | Configuration_AI_NI9219_Type 4 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
280 | Configuration_AI_NI9219_Type 5 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
281 | Configuration_AI_NI9219_Type 6 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
282 | Configuration_AI_NI9219_Type 7 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
283 | Configuration_AI_NI9219_Type 8 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
284 | Configuration_AI_NI9219_Type 9 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
285 | Configuration_AI_NI9219_Type 10 = "Resistance_RTD" No newline at end of file | |||
| 184 | POS_Config.IP = "10.1.2.1" No newline at end of file |
|
286 | POS_Config.IP = "10.1.2.1" | |
| 185 | POS_Config.Port = "502" No newline at end of file |
|
287 | POS_Config.Port = "502" | |
| 186 | POS_AxesNames.<size(s)> = "3" No newline at end of file |
|
288 | POS_AxesNames.<size(s)> = "3" | |
| 187 | POS_AxesNames 0 = "X" No newline at end of file |
|
289 | POS_AxesNames 0 = "X" | |
| 188 | POS_AxesNames 1 = "Y" No newline at end of file |
|
290 | POS_AxesNames 1 = "Y" | |
| 189 | POS_AxesNames 2 = "Z" No newline at end of file |
|
291 | POS_AxesNames 2 = "Z" | |
| 190 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" No newline at end of file |
|
292 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" | |
| 191 | POS_Limits_Axis1 = "<size(s)=2> 0 210" No newline at end of file |
|
293 | POS_Limits_Axis1 = "<size(s)=2> 0 210" | |
| 192 | POS_Limits_Axis2 = "<size(s)=2> 0 242" No newline at end of file |
|
294 | POS_Limits_Axis2 = "<size(s)=2> 0 242" | |
| 193 | POS_Limits_Axis3 = "<size(s)=2> 0 111" No newline at end of file |
|
295 | POS_Limits_Axis3 = "<size(s)=2> 0 111" | |
| 194 | POS_AxesFlipped.<size(s)> = "3" No newline at end of file |
|
296 | POS_AxesFlipped.<size(s)> = "3" | |
| 195 | POS_AxesFlipped 0 = "True" No newline at end of file |
|
297 | POS_AxesFlipped 0 = "True" | |
| 196 | POS_AxesFlipped 1 = "True" No newline at end of file |
|
298 | POS_AxesFlipped 1 = "True" | |
| 197 | POS_AxesFlipped 2 = "False" No newline at end of file |
|
299 | POS_AxesFlipped 2 = "False" | |
| 198 | Pos_MaxVelocity = "300" No newline at end of file |
|
300 | Pos_MaxVelocity = "300" | |
| 199 | Pos_MaxAcceleration = "15000" No newline at end of file |
|
301 | Pos_MaxAcceleration = "15000" | |
| 200 | Pos_MaxJerk = "140000" No newline at end of file |
|
302 | Pos_MaxJerk = "140000" | |
| 201 | Pos_DO_E-Stop_Index = "0" No newline at end of file |
|
303 | Pos_DO_E-Stop_Index = "0" | |
| 202 | Pos_DO_Setup_Index = "1" No newline at end of file |
|
304 | Pos_DO_Setup_Index = "1" | |
| 203 | No newline at end of file |
|
305 | ||
| 204 | [DefaultValues] No newline at end of file |
|
306 | [DefaultValues] | |
| 205 | WorkingStroke = "0" |
|
307 | WorkingStroke = "0" | |
| No newline at end of file |
|
308 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file | ||
| 206 | MaxTemperature = "<size(s)=10> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file |
|
|||
| 207 | MeasurementTime = "1" No newline at end of file |
|
309 | MeasurementTime = "1" | |
| 208 | NominalCurrent = "0" No newline at end of file |
|
310 | NominalCurrent = "0" | |
| 209 | TableControl = False |
|
311 | TableControl = False | |
| No newline at end of file |
|
312 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | ||
| 210 | SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230" |
|
No newline at end of file | ||
| No newline at end of file |
|
313 | Sensors+.<size(s)> = "15" No newline at end of file | ||
| 211 | Sensors+.<size(s)> = "10" No newline at end of file |
|
|||
| 212 | Sensors+ 0 = "True" No newline at end of file |
|
314 | Sensors+ 0 = "True" | |
| 213 | Sensors+ 1 = "True" No newline at end of file |
|
315 | Sensors+ 1 = "True" | |
| 214 | Sensors+ 2 = "True" No newline at end of file |
|
316 | Sensors+ 2 = "True" | |
| 215 | Sensors+ 3 = "True" No newline at end of file |
|
317 | Sensors+ 3 = "True" | |
| 216 | Sensors+ 4 = "False" No newline at end of file |
|
318 | Sensors+ 4 = "False" | |
| 217 | Sensors+ 5 = "False" No newline at end of file |
|
319 | Sensors+ 5 = "False" | |
| 218 | Sensors+ 6 = "False" No newline at end of file |
|
320 | Sensors+ 6 = "False" | |
| 219 | Sensors+ 7 = "False" No newline at end of file |
|
321 | Sensors+ 7 = "False" | |
| 220 | Sensors+ 8 = "False" No newline at end of file |
|
322 | Sensors+ 8 = "False" | |
| 221 | Sensors+ 9 = "False" |
|
323 | Sensors+ 9 = "False" | |
| No newline at end of file |
|
324 | Sensors+ 10 = "False" | ||
| 222 | SensorsFunction.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
325 | Sensors+ 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
326 | Sensors+ 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
327 | Sensors+ 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
328 | Sensors+ 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
329 | SensorsFunction.<size(s)> = "15" No newline at end of file | |||
| 223 | SensorsFunction 0 = "Umgebungstemperatur" No newline at end of file |
|
330 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 224 | SensorsFunction 1 = "Pr�flingstemperatur" No newline at end of file |
|
331 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 225 | SensorsFunction 2 = "Temperatur 3" No newline at end of file |
|
332 | SensorsFunction 2 = "Temperatur 3" | |
| 226 | SensorsFunction 3 = "Temperatur 4" No newline at end of file |
|
333 | SensorsFunction 3 = "Temperatur 4" | |
| 227 | SensorsFunction 4 = "Temperatur 5" No newline at end of file |
|
334 | SensorsFunction 4 = "Temperatur 5" | |
| 228 | SensorsFunction 5 = "Temperatur 6" No newline at end of file |
|
335 | SensorsFunction 5 = "Temperatur 6" | |
| 229 | SensorsFunction 6 = "Temperatur 7" No newline at end of file |
|
336 | SensorsFunction 6 = "Temperatur 7" | |
| 230 | SensorsFunction 7 = "Temperatur 8" No newline at end of file |
|
337 | SensorsFunction 7 = "Temperatur 8" | |
| 231 | SensorsFunction 8 = "Temperatur 9" No newline at end of file |
|
338 | SensorsFunction 8 = "Temperatur 9" | |
| 232 | SensorsFunction 9 = "Temperatur 10" No newline at end of file |
|
339 | SensorsFunction 9 = "Temperatur 10" | |
|
|
340 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
No newline at end of file | ||||
|
|
341 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
No newline at end of file | ||||
|
|
342 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
No newline at end of file | ||||
|
|
343 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
No newline at end of file | ||||
|
|
344 | SensorsFunction 14 = "Temperatur 15" No newline at end of file | |||
| 233 | MovingParameter.Velocity = "20,000000" No newline at end of file |
|
345 | MovingParameter.Velocity = "20,000000" | |
| 234 | MovingParameter.Acceleration = "50,000000" No newline at end of file |
|
346 | MovingParameter.Acceleration = "50,000000" | |
| 235 | MovingParameter.Jerk = "140000,000000" No newline at end of file |
|
347 | MovingParameter.Jerk = "140000,000000" | |
| 236 | Learning_Steps.X = "1,000000" No newline at end of file |
|
348 | Learning_Steps.X = "1,000000" | |
| 237 | Learning_Steps.Y = "1,000000" No newline at end of file |
|
349 | Learning_Steps.Y = "1,000000" | |
| 238 | Learning_Steps.Z = "1,000000" No newline at end of file |
|
350 | Learning_Steps.Z = "1,000000" | |
| 239 | No newline at end of file |
|
351 | ||
| 240 | [Pathes] No newline at end of file |
|
352 | [Pathes] | |
| 241 | User = "C:\Work\CurrentTester\support\User.txt" No newline at end of file |
|
353 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 242 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" No newline at end of file |
|
354 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" | |
| 243 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" No newline at end of file |
|
355 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" | |
| 244 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" No newline at end of file |
|
356 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 245 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" No newline at end of file |
|
357 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 246 | No newline at end of file |
|
358 | ||
| 247 | [Report] No newline at end of file |
|
359 | [Report] | |
| 248 | FileNameFormat = "%s_TestResults.txt" No newline at end of file |
|
360 | FileNameFormat = "%s_TestResults.txt" | |
| 249 | ReportNameFormat = "%s_TestReport_%s.xlsx" No newline at end of file |
|
361 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 250 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" No newline at end of file |
|
362 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 251 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" No newline at end of file |
|
363 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 252 | No newline at end of file |
|
364 | ||
| 253 | [Protocol] No newline at end of file |
|
365 | [Protocol] | |
| 254 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" No newline at end of file |
|
366 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 255 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" No newline at end of file |
|
367 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 256 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" No newline at end of file |
|
368 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 257 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" No newline at end of file |
|
369 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 258 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" No newline at end of file |
|
370 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 259 | ProtocolDataFolderName = "Bilder|Messungen" No newline at end of file |
|
371 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 260 | No newline at end of file |
|
372 | ||
| 261 | [StateMessages] No newline at end of file |
|
373 | [StateMessages] | |
| 262 | Info.<size(s)> = "28" No newline at end of file |
|
374 | Info.<size(s)> = "28" | |
| 263 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" No newline at end of file |
|
375 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 264 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" No newline at end of file |
|
376 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 265 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" No newline at end of file |
|
377 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 266 | Info 3 = "Testdaten anlegen" No newline at end of file |
|
378 | Info 3 = "Testdaten anlegen" | |
| 267 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" No newline at end of file |
|
379 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 268 | Info 5 = "Test geladen" No newline at end of file |
|
380 | Info 5 = "Test geladen" | |
| 269 | Info 6 = "Laufende Pr�fung..." No newline at end of file |
|
381 | Info 6 = "Laufende Pr�fung..." | |
| 270 | Info 7 = "Pr�fung erfolgreich abgeschlossen" No newline at end of file |
|
382 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 271 | Info 8 = "Fehler aufgetreten!" No newline at end of file |
|
383 | Info 8 = "Fehler aufgetreten!" | |
| 272 | Info 9 = "Test abgebrochen!" No newline at end of file |
|
384 | Info 9 = "Test abgebrochen!" | |
| 273 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" No newline at end of file |
|
385 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 274 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" No newline at end of file |
|
386 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 275 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" No newline at end of file |
|
387 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 276 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" No newline at end of file |
|
388 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 277 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" No newline at end of file |
|
389 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 278 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" No newline at end of file |
|
390 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 279 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" No newline at end of file |
|
391 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 280 | Info 17 = "Testprotokoll erstellt" No newline at end of file |
|
392 | Info 17 = "Testprotokoll erstellt" | |
| 281 | Info 18 = "Der letzte Test ist geladen..." No newline at end of file |
|
393 | Info 18 = "Der letzte Test ist geladen..." | |
| 282 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" No newline at end of file |
|
394 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 283 | Info 20 = "Testbericht wird erstellt... Bitte warten" No newline at end of file |
|
395 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 284 | Info 21 = "Testbericht erstellt" No newline at end of file |
|
396 | Info 21 = "Testbericht erstellt" | |
| 285 | Info 22 = "Achsen werden initialisiert..." No newline at end of file |
|
397 | Info 22 = "Achsen werden initialisiert..." | |
| 286 | Info 23 = "Referenzfahrt l�uft..." No newline at end of file |
|
398 | Info 23 = "Referenzfahrt l�uft..." | |
| 287 | Info 24 = "X-Achse wird referenziert..." No newline at end of file |
|
399 | Info 24 = "X-Achse wird referenziert..." | |
| 288 | Info 25 = "Y-Achse wird referenziert..." No newline at end of file |
|
400 | Info 25 = "Y-Achse wird referenziert..." | |
| 289 | Info 26 = "Z-Achse wird referenziert..." No newline at end of file |
|
401 | Info 26 = "Z-Achse wird referenziert..." | |
| 290 | Info 27 = "Position wird angefahren..." No newline at end of file |
|
402 | Info 27 = "Position wird angefahren..." | |
| 291 | Result.<size(s)> = "28" No newline at end of file |
|
403 | Result.<size(s)> = "28" | |
| 292 | Result 0 = "Not-Halt" No newline at end of file |
|
404 | Result 0 = "Not-Halt" | |
| 293 | Result 1 = "" No newline at end of file |
|
405 | Result 1 = "" | |
| 294 | Result 2 = "Bereit" No newline at end of file |
|
406 | Result 2 = "Bereit" | |
| 295 | Result 3 = "Bereit" No newline at end of file |
|
407 | Result 3 = "Bereit" | |
| 296 | Result 4 = "Einrichtbetrieb" No newline at end of file |
|
408 | Result 4 = "Einrichtbetrieb" | |
| 297 | Result 5 = "Bereit" No newline at end of file |
|
409 | Result 5 = "Bereit" | |
| 298 | Result 6 = "Pr�fung l�uft" No newline at end of file |
|
410 | Result 6 = "Pr�fung l�uft" | |
| 299 | Result 7 = "Pr�fung fertig" No newline at end of file |
|
411 | Result 7 = "Pr�fung fertig" | |
| 300 | Result 8 = "Fehler" No newline at end of file |
|
412 | Result 8 = "Fehler" | |
| 301 | Result 9 = "Pr�fung Stop" No newline at end of file |
|
413 | Result 9 = "Pr�fung Stop" | |
| 302 | Result 10 = "Pr�fung Stop" No newline at end of file |
|
414 | Result 10 = "Pr�fung Stop" | |
| 303 | Result 11 = "Pr�fung Stop" No newline at end of file |
|
415 | Result 11 = "Pr�fung Stop" | |
| 304 | Result 12 = "Pr�fung Stop" No newline at end of file |
|
416 | Result 12 = "Pr�fung Stop" | |
| 305 | Result 13 = "Pr�fung Stop" No newline at end of file |
|
417 | Result 13 = "Pr�fung Stop" | |
| 306 | Result 14 = "Pr�fung Stop" No newline at end of file |
|
418 | Result 14 = "Pr�fung Stop" | |
| 307 | Result 15 = "Pr�fung Stop" No newline at end of file |
|
419 | Result 15 = "Pr�fung Stop" | |
| 308 | Result 16 = "Bereit" No newline at end of file |
|
420 | Result 16 = "Bereit" | |
| 309 | Result 17 = "Bereit" No newline at end of file |
|
421 | Result 17 = "Bereit" | |
| 310 | Result 18 = "Bereit" No newline at end of file |
|
422 | Result 18 = "Bereit" | |
| 311 | Result 19 = "Bereit" No newline at end of file |
|
423 | Result 19 = "Bereit" | |
| 312 | Result 20 = "Bereit" No newline at end of file |
|
424 | Result 20 = "Bereit" | |
| 313 | Result 21 = "Bereit" No newline at end of file |
|
425 | Result 21 = "Bereit" | |
| 314 | Result 22 = "" No newline at end of file |
|
426 | Result 22 = "" | |
| 315 | Result 23 = "Einrichtbetrieb" No newline at end of file |
|
427 | Result 23 = "Einrichtbetrieb" | |
| 316 | Result 24 = "Einrichtbetrieb" No newline at end of file |
|
428 | Result 24 = "Einrichtbetrieb" | |
| 317 | Result 25 = "Einrichtbetrieb" No newline at end of file |
|
429 | Result 25 = "Einrichtbetrieb" | |
| 318 | Result 26 = "Einrichtbetrieb" No newline at end of file |
|
430 | Result 26 = "Einrichtbetrieb" | |
| 319 | Result 27 = "Einrichtbetrieb" No newline at end of file |
|
431 | Result 27 = "Einrichtbetrieb" | |
| 320 | No newline at end of file |
|
432 | ||
| 321 | [DialogMessages] No newline at end of file |
|
433 | [DialogMessages] | |
| 322 | Messages.<size(s)> = "7" No newline at end of file |
|
434 | Messages.<size(s)> = "7" | |
| 323 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" No newline at end of file |
|
435 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 324 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
436 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 325 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
437 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 326 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" No newline at end of file |
|
438 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 327 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" No newline at end of file |
|
439 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 328 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" No newline at end of file |
|
440 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 329 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
441 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,227 +1,257 | |||||
| 1 | [Tester] No newline at end of file |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP1" No newline at end of file |
|
2 | TesterType = "HSMP1" | |
| 3 | TesterName = "Hochstrommessplatz 1" No newline at end of file |
|
3 | TesterName = "Hochstrommessplatz 1" | |
| 4 | MaxCurrent = 600 No newline at end of file |
|
4 | MaxCurrent = 600 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| No newline at end of file |
|
6 | SensorsEnable.<size(s)> = "15" No newline at end of file | ||
| 6 | SensorsEnable.<size(s)> = "10" No newline at end of file |
|
|||
| 7 | SensorsEnable 0 = "True" No newline at end of file |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" No newline at end of file |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" No newline at end of file |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" No newline at end of file |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" No newline at end of file |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "False" No newline at end of file |
|
12 | SensorsEnable 5 = "False" | |
| 13 | SensorsEnable 6 = "False" No newline at end of file |
|
13 | SensorsEnable 6 = "False" | |
| 14 | SensorsEnable 7 = "False" No newline at end of file |
|
14 | SensorsEnable 7 = "False" | |
| 15 | SensorsEnable 8 = "False" No newline at end of file |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| No newline at end of file |
|
17 | SensorsEnable 10 = "False" | ||
| 17 | SensorsDescription.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
22 | SensorsDescription.<size(s)> = "15" No newline at end of file | |||
| 18 | SensorsDescription 0 = "Keithley: Ch6" No newline at end of file |
|
23 | SensorsDescription 0 = "Keithley: Ch6" | |
| 19 | SensorsDescription 1 = "Keithley: Ch7" No newline at end of file |
|
24 | SensorsDescription 1 = "Keithley: Ch7" | |
| 20 | SensorsDescription 2 = "Keithley: Ch8" No newline at end of file |
|
25 | SensorsDescription 2 = "Keithley: Ch8" | |
| 21 | SensorsDescription 3 = "Keithley: Ch9" No newline at end of file |
|
26 | SensorsDescription 3 = "Keithley: Ch9" | |
| 22 | SensorsDescription 4 = "Keithley: Ch10" No newline at end of file |
|
27 | SensorsDescription 4 = "Keithley: Ch10" | |
| 23 | SensorsDescription 5 = "" No newline at end of file |
|
28 | SensorsDescription 5 = "" | |
| 24 | SensorsDescription 6 = "" No newline at end of file |
|
29 | SensorsDescription 6 = "" | |
| 25 | SensorsDescription 7 = "" No newline at end of file |
|
30 | SensorsDescription 7 = "" | |
| 26 | SensorsDescription 8 = "" No newline at end of file |
|
31 | SensorsDescription 8 = "" | |
| 27 | SensorsDescription 9 = "" No newline at end of file |
|
32 | SensorsDescription 9 = "" | |
|
|
33 | SensorsDescription 10 = "" | |||
|
|
No newline at end of file | ||||
|
|
34 | SensorsDescription 11 = "" | |||
|
|
No newline at end of file | ||||
|
|
35 | SensorsDescription 12 = "" | |||
|
|
No newline at end of file | ||||
|
|
36 | SensorsDescription 13 = "" | |||
|
|
No newline at end of file | ||||
|
|
37 | SensorsDescription 14 = "" No newline at end of file | |||
| 28 | VoltageDescription.<size(s)> = "4 2" No newline at end of file |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "Keithley: Ch2" No newline at end of file |
|
39 | VoltageDescription 0 = "Keithley: Ch2" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" No newline at end of file |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "Keithley: Ch4" No newline at end of file |
|
41 | VoltageDescription 2 = "Keithley: Ch4" | |
| 32 | VoltageDescription 3 = "Shunt- Spannung [V]" No newline at end of file |
|
42 | VoltageDescription 3 = "Shunt- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" No newline at end of file |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" No newline at end of file |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" No newline at end of file |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" No newline at end of file |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" No newline at end of file |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 | No newline at end of file |
|
48 | ||
| 39 | [Hardware] No newline at end of file |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True No newline at end of file |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "Dev1/port1/line0" No newline at end of file |
|
51 | DI_E-Stop = "Dev1/port1/line0" | |
| 42 | DI_Setup = "" No newline at end of file |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM2" No newline at end of file |
|
53 | PowerSupply_VISAName = "COM2" | |
| 44 | PowerSupply_Address = "6" No newline at end of file |
|
54 | PowerSupply_Address = "6" | |
| 45 | PowerSupply_Baudrate = "9600" No newline at end of file |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "8,000000" No newline at end of file |
|
56 | PowerSupply_OutputVoltage = "8,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,000000" No newline at end of file |
|
57 | PowerSupply_OverVoltageProtection = "9,000000" | |
| 48 | PowerSupply_MinCurrent = "1" No newline at end of file |
|
58 | PowerSupply_MinCurrent = "1" | |
| 49 | PowerSupply_Check = False No newline at end of file |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "4700,000000" No newline at end of file |
|
60 | PowerSupply_WarningPower = "4700,000000" | |
| 51 | PowerSupply_AbortPower = "4750,000000" No newline at end of file |
|
61 | PowerSupply_AbortPower = "4750,000000" | |
| 52 | PowerSupply_PID = "False" No newline at end of file |
|
62 | PowerSupply_PID = "False" | |
| 53 | PowerSupply_PID_Time = "0,100000" No newline at end of file |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" No newline at end of file |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" No newline at end of file |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" No newline at end of file |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0" |
|
67 | AbortCurrentDifference = "0" | |
| No newline at end of file |
|
68 | Measurement_Channels.<size(s)> = "17" No newline at end of file | ||
| 58 | Measurement_Channels.<size(s)> = "13" No newline at end of file |
|
|||
| 59 | Measurement_Channels 0 = "112" No newline at end of file |
|
69 | Measurement_Channels 0 = "112" | |
| 60 | Measurement_Channels 1 = "102" No newline at end of file |
|
70 | Measurement_Channels 1 = "102" | |
| 61 | Measurement_Channels 2 = "104" No newline at end of file |
|
71 | Measurement_Channels 2 = "104" | |
| 62 | Measurement_Channels 3 = "106" No newline at end of file |
|
72 | Measurement_Channels 3 = "106" | |
| 63 | Measurement_Channels 4 = "107" No newline at end of file |
|
73 | Measurement_Channels 4 = "107" | |
| 64 | Measurement_Channels 5 = "108" No newline at end of file |
|
74 | Measurement_Channels 5 = "108" | |
| 65 | Measurement_Channels 6 = "109" No newline at end of file |
|
75 | Measurement_Channels 6 = "109" | |
| 66 | Measurement_Channels 7 = "110" No newline at end of file |
|
76 | Measurement_Channels 7 = "110" | |
| 67 | Measurement_Channels 8 = "" No newline at end of file |
|
77 | Measurement_Channels 8 = "" | |
| 68 | Measurement_Channels 9 = "" No newline at end of file |
|
78 | Measurement_Channels 9 = "" | |
| 69 | Measurement_Channels 10 = "" No newline at end of file |
|
79 | Measurement_Channels 10 = "" | |
| 70 | Measurement_Channels 11 = "" No newline at end of file |
|
80 | Measurement_Channels 11 = "" | |
| 71 | Measurement_Channels 12 = "" No newline at end of file |
|
81 | Measurement_Channels 12 = "" | |
|
|
82 | Measurement_Channels 13 = "" | |||
|
|
No newline at end of file | ||||
|
|
83 | Measurement_Channels 14 = "" | |||
|
|
No newline at end of file | ||||
|
|
84 | Measurement_Channels 15 = "" | |||
|
|
No newline at end of file | ||||
|
|
85 | Measurement_Channels 16 = "" No newline at end of file | |||
| 72 | ShuntResistance = 0,00006 No newline at end of file |
|
86 | ShuntResistance = 0,00006 | |
| 73 | Measurement_Check = False No newline at end of file |
|
87 | Measurement_Check = False | |
| 74 | DMM_VISAName = "COM1" No newline at end of file |
|
88 | DMM_VISAName = "COM1" | |
| 75 | DMM_ContactLimits = "<size(s)=2> 0,0 10,0" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,0 10,0" | |
| No newline at end of file |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | ||
| 76 | TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file | ||
| 77 | TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
|||
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" No newline at end of file |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" No newline at end of file |
|
94 | AllowedContactFails = "2" | |
| 81 | No newline at end of file |
|
95 | ||
| 82 | [HSMP1] No newline at end of file |
|
96 | [HSMP1] | |
| 83 | DMM_Baudrate = "9600" No newline at end of file |
|
97 | DMM_Baudrate = "9600" | |
| 84 | Measurement_Channels_AutoRange.<size(s)> = "13" No newline at end of file |
|
98 | Measurement_Channels_AutoRange.<size(s)> = "13" | |
| 85 | Measurement_Channels_AutoRange 0 = "FALSE" No newline at end of file |
|
99 | Measurement_Channels_AutoRange 0 = "FALSE" | |
| 86 | Measurement_Channels_AutoRange 1 = "TRUE" No newline at end of file |
|
100 | Measurement_Channels_AutoRange 1 = "TRUE" | |
| 87 | Measurement_Channels_AutoRange 2 = "TRUE" No newline at end of file |
|
101 | Measurement_Channels_AutoRange 2 = "TRUE" | |
| 88 | Measurement_Channels_AutoRange 3 = "TRUE" No newline at end of file |
|
102 | Measurement_Channels_AutoRange 3 = "TRUE" | |
| 89 | Measurement_Channels_AutoRange 4 = "TRUE" No newline at end of file |
|
103 | Measurement_Channels_AutoRange 4 = "TRUE" | |
| 90 | Measurement_Channels_AutoRange 5 = "TRUE" No newline at end of file |
|
104 | Measurement_Channels_AutoRange 5 = "TRUE" | |
| 91 | Measurement_Channels_AutoRange 6 = "TRUE" No newline at end of file |
|
105 | Measurement_Channels_AutoRange 6 = "TRUE" | |
| 92 | Measurement_Channels_AutoRange 7 = "TRUE" No newline at end of file |
|
106 | Measurement_Channels_AutoRange 7 = "TRUE" | |
| 93 | Measurement_Channels_AutoRange 8 = "TRUE" No newline at end of file |
|
107 | Measurement_Channels_AutoRange 8 = "TRUE" | |
| 94 | Measurement_Channels_AutoRange 9 = "TRUE" No newline at end of file |
|
108 | Measurement_Channels_AutoRange 9 = "TRUE" | |
| 95 | Measurement_Channels_AutoRange 10 = "TRUE" No newline at end of file |
|
109 | Measurement_Channels_AutoRange 10 = "TRUE" | |
| 96 | Measurement_Channels_AutoRange 11 = "TRUE" No newline at end of file |
|
110 | Measurement_Channels_AutoRange 11 = "TRUE" | |
| 97 | Measurement_Channels_AutoRange 12 = "TRUE" No newline at end of file |
|
111 | Measurement_Channels_AutoRange 12 = "TRUE" | |
| 98 | Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" No newline at end of file |
|
112 | Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | |
| 99 | Measurement_Channels_Resolution.<size(s)> = "13" No newline at end of file |
|
113 | Measurement_Channels_Resolution.<size(s)> = "13" | |
| 100 | Measurement_Channels_Resolution 0 = "6.5" No newline at end of file |
|
114 | Measurement_Channels_Resolution 0 = "6.5" | |
| 101 | Measurement_Channels_Resolution 1 = "6.5" No newline at end of file |
|
115 | Measurement_Channels_Resolution 1 = "6.5" | |
| 102 | Measurement_Channels_Resolution 2 = "6.5" No newline at end of file |
|
116 | Measurement_Channels_Resolution 2 = "6.5" | |
| 103 | Measurement_Channels_Resolution 3 = "6.5" No newline at end of file |
|
117 | Measurement_Channels_Resolution 3 = "6.5" | |
| 104 | Measurement_Channels_Resolution 4 = "6.5" No newline at end of file |
|
118 | Measurement_Channels_Resolution 4 = "6.5" | |
| 105 | Measurement_Channels_Resolution 5 = "6.5" No newline at end of file |
|
119 | Measurement_Channels_Resolution 5 = "6.5" | |
| 106 | Measurement_Channels_Resolution 6 = "6.5" No newline at end of file |
|
120 | Measurement_Channels_Resolution 6 = "6.5" | |
| 107 | Measurement_Channels_Resolution 7 = "6.5" No newline at end of file |
|
121 | Measurement_Channels_Resolution 7 = "6.5" | |
| 108 | Measurement_Channels_Resolution 8 = "6.5" No newline at end of file |
|
122 | Measurement_Channels_Resolution 8 = "6.5" | |
| 109 | Measurement_Channels_Resolution 9 = "6.5" No newline at end of file |
|
123 | Measurement_Channels_Resolution 9 = "6.5" | |
| 110 | Measurement_Channels_Resolution 10 = "6.5" No newline at end of file |
|
124 | Measurement_Channels_Resolution 10 = "6.5" | |
| 111 | Measurement_Channels_Resolution 11 = "6.5" No newline at end of file |
|
125 | Measurement_Channels_Resolution 11 = "6.5" | |
| 112 | Measurement_Channels_Resolution 12 = "6.5" No newline at end of file |
|
126 | Measurement_Channels_Resolution 12 = "6.5" | |
| 113 | Resistance_Function = "Resistance" No newline at end of file |
|
127 | Resistance_Function = "Resistance" | |
| 114 | Resistance_OffsetCompensation = "FALSE" No newline at end of file |
|
128 | Resistance_OffsetCompensation = "FALSE" | |
| 115 | TableControl_Out_LiftTable = "Dev1/port0/line5" No newline at end of file |
|
129 | TableControl_Out_LiftTable = "Dev1/port0/line5" | |
| 116 | TableControl_Out_SettingMode.<size(s)> = "2" No newline at end of file |
|
130 | TableControl_Out_SettingMode.<size(s)> = "2" | |
| 117 | TableControl_Out_SettingMode 0 = "Dev1/port0/line0" No newline at end of file |
|
131 | TableControl_Out_SettingMode 0 = "Dev1/port0/line0" | |
| 118 | TableControl_Out_SettingMode 1 = "Dev1/port0/line1" No newline at end of file |
|
132 | TableControl_Out_SettingMode 1 = "Dev1/port0/line1" | |
| 119 | No newline at end of file |
|
133 | ||
| 120 | [DefaultValues] No newline at end of file |
|
134 | [DefaultValues] | |
| 121 | WorkingStroke = "0" |
|
135 | WorkingStroke = "0" | |
| No newline at end of file |
|
136 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file | ||
| 122 | MaxTemperature = "<size(s)=10> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file |
|
|||
| 123 | MeasurementTime = "1" No newline at end of file |
|
137 | MeasurementTime = "1" | |
| 124 | NominalCurrent = "0" No newline at end of file |
|
138 | NominalCurrent = "0" | |
| 125 | TableControl = False |
|
139 | TableControl = False | |
| No newline at end of file |
|
140 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | ||
| 126 | SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230" |
|
No newline at end of file | ||
| No newline at end of file |
|
141 | Sensors+.<size(s)> = "15" No newline at end of file | ||
| 127 | Sensors+.<size(s)> = "10" No newline at end of file |
|
|||
| 128 | Sensors+ 0 = "True" No newline at end of file |
|
142 | Sensors+ 0 = "True" | |
| 129 | Sensors+ 1 = "True" No newline at end of file |
|
143 | Sensors+ 1 = "True" | |
| 130 | Sensors+ 2 = "True" No newline at end of file |
|
144 | Sensors+ 2 = "True" | |
| 131 | Sensors+ 3 = "True" |
|
145 | Sensors+ 3 = "True" | |
| No newline at end of file |
|
146 | Sensors+ 4 = "False" No newline at end of file | ||
| 132 | Sensors+ 4 = "True" No newline at end of file |
|
|||
| 133 | Sensors+ 5 = "False" No newline at end of file |
|
147 | Sensors+ 5 = "False" | |
| 134 | Sensors+ 6 = "False" No newline at end of file |
|
148 | Sensors+ 6 = "False" | |
| 135 | Sensors+ 7 = "False" No newline at end of file |
|
149 | Sensors+ 7 = "False" | |
| 136 | Sensors+ 8 = "False" No newline at end of file |
|
150 | Sensors+ 8 = "False" | |
| 137 | Sensors+ 9 = "False" |
|
151 | Sensors+ 9 = "False" | |
| No newline at end of file |
|
152 | Sensors+ 10 = "False" | ||
| 138 | SensorsFunction.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
153 | Sensors+ 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
154 | Sensors+ 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
155 | Sensors+ 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
156 | Sensors+ 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
157 | SensorsFunction.<size(s)> = "15" No newline at end of file | |||
| 139 | SensorsFunction 0 = "Umgebungstemperatur" No newline at end of file |
|
158 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 140 | SensorsFunction 1 = "Pr�flingstemperatur" No newline at end of file |
|
159 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 141 | SensorsFunction 2 = "Temperatur 3" No newline at end of file |
|
160 | SensorsFunction 2 = "Temperatur 3" | |
| 142 | SensorsFunction 3 = "Temperatur 4" No newline at end of file |
|
161 | SensorsFunction 3 = "Temperatur 4" | |
| 143 | SensorsFunction 4 = "Temperatur 5" No newline at end of file |
|
162 | SensorsFunction 4 = "Temperatur 5" | |
| 144 | SensorsFunction 5 = "Temperatur 6" No newline at end of file |
|
163 | SensorsFunction 5 = "Temperatur 6" | |
| 145 | SensorsFunction 6 = "Temperatur 7" No newline at end of file |
|
164 | SensorsFunction 6 = "Temperatur 7" | |
| 146 | SensorsFunction 7 = "Temperatur 8" No newline at end of file |
|
165 | SensorsFunction 7 = "Temperatur 8" | |
| 147 | SensorsFunction 8 = "Temperatur 9" No newline at end of file |
|
166 | SensorsFunction 8 = "Temperatur 9" | |
| 148 | SensorsFunction 9 = "Temperatur 10" No newline at end of file |
|
167 | SensorsFunction 9 = "Temperatur 10" | |
|
|
168 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
No newline at end of file | ||||
|
|
169 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
No newline at end of file | ||||
|
|
170 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
No newline at end of file | ||||
|
|
171 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
No newline at end of file | ||||
|
|
172 | SensorsFunction 14 = "Temperatur 15" | |||
|
|
No newline at end of file | ||||
|
|
173 | MovingParameter.Velocity = "20,000000" | |||
|
|
No newline at end of file | ||||
|
|
174 | MovingParameter.Acceleration = "50,000000" | |||
|
|
No newline at end of file | ||||
|
|
175 | MovingParameter.Jerk = "140000,000000" | |||
|
|
No newline at end of file | ||||
|
|
176 | Learning_Steps.X = "1,000000" | |||
|
|
No newline at end of file | ||||
|
|
177 | Learning_Steps.Y = "1,000000" | |||
|
|
No newline at end of file | ||||
|
|
178 | Learning_Steps.Z = "1,000000" No newline at end of file | |||
| 149 | No newline at end of file |
|
179 | ||
| 150 | [Pathes] No newline at end of file |
|
180 | [Pathes] | |
| 151 | User = "C:\Work\CurrentTester\support\User.txt" No newline at end of file |
|
181 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 152 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1" No newline at end of file |
|
182 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1" | |
| 153 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols" No newline at end of file |
|
183 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols" | |
| 154 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" No newline at end of file |
|
184 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 155 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" No newline at end of file |
|
185 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 156 | No newline at end of file |
|
186 | ||
| 157 | [Report] No newline at end of file |
|
187 | [Report] | |
| 158 | FileNameFormat = "%s_TestResults.txt" No newline at end of file |
|
188 | FileNameFormat = "%s_TestResults.txt" | |
| 159 | ReportNameFormat = "%s_TestReport_%s.xlsx" No newline at end of file |
|
189 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 160 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" No newline at end of file |
|
190 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 161 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" No newline at end of file |
|
191 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 162 | No newline at end of file |
|
192 | ||
| 163 | [Protocol] No newline at end of file |
|
193 | [Protocol] | |
| 164 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" No newline at end of file |
|
194 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 165 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" No newline at end of file |
|
195 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 166 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" No newline at end of file |
|
196 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 167 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" No newline at end of file |
|
197 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 168 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" No newline at end of file |
|
198 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 169 | ProtocolDataFolderName = "Bilder|Messungen" No newline at end of file |
|
199 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 170 | No newline at end of file |
|
200 | ||
| 171 | [StateMessages] No newline at end of file |
|
201 | [StateMessages] | |
| 172 | Info.<size(s)> = "22" No newline at end of file |
|
202 | Info.<size(s)> = "22" | |
| 173 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" No newline at end of file |
|
203 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 174 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" No newline at end of file |
|
204 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 175 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" No newline at end of file |
|
205 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 176 | Info 3 = "Testdaten anlegen" No newline at end of file |
|
206 | Info 3 = "Testdaten anlegen" | |
| 177 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" No newline at end of file |
|
207 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 178 | Info 5 = "Test geladen" No newline at end of file |
|
208 | Info 5 = "Test geladen" | |
| 179 | Info 6 = "Laufende Pr�fung..." No newline at end of file |
|
209 | Info 6 = "Laufende Pr�fung..." | |
| 180 | Info 7 = "Pr�fung erfolgreich abgeschlossen" No newline at end of file |
|
210 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 181 | Info 8 = "Fehler aufgetreten!" No newline at end of file |
|
211 | Info 8 = "Fehler aufgetreten!" | |
| 182 | Info 9 = "Test abgebrochen!" No newline at end of file |
|
212 | Info 9 = "Test abgebrochen!" | |
| 183 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" No newline at end of file |
|
213 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 184 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" No newline at end of file |
|
214 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 185 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" No newline at end of file |
|
215 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 186 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" No newline at end of file |
|
216 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 187 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" No newline at end of file |
|
217 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 188 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" No newline at end of file |
|
218 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 189 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" No newline at end of file |
|
219 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 190 | Info 17 = "Testprotokoll erstellt" No newline at end of file |
|
220 | Info 17 = "Testprotokoll erstellt" | |
| 191 | Info 18 = "Der letzte Test ist geladen..." No newline at end of file |
|
221 | Info 18 = "Der letzte Test ist geladen..." | |
| 192 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" No newline at end of file |
|
222 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 193 | Info 20 = "Testbericht wird erstellt... Bitte warten" No newline at end of file |
|
223 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 194 | Info 21 = "Testbericht erstellt" No newline at end of file |
|
224 | Info 21 = "Testbericht erstellt" | |
| 195 | Result.<size(s)> = "22" No newline at end of file |
|
225 | Result.<size(s)> = "22" | |
| 196 | Result 0 = "Not-Halt" No newline at end of file |
|
226 | Result 0 = "Not-Halt" | |
| 197 | Result 1 = "" No newline at end of file |
|
227 | Result 1 = "" | |
| 198 | Result 2 = "Bereit" No newline at end of file |
|
228 | Result 2 = "Bereit" | |
| 199 | Result 3 = "Bereit" No newline at end of file |
|
229 | Result 3 = "Bereit" | |
| 200 | Result 4 = "Einrichtbetrieb" No newline at end of file |
|
230 | Result 4 = "Einrichtbetrieb" | |
| 201 | Result 5 = "Bereit" No newline at end of file |
|
231 | Result 5 = "Bereit" | |
| 202 | Result 6 = "Pr�fung l�uft" No newline at end of file |
|
232 | Result 6 = "Pr�fung l�uft" | |
| 203 | Result 7 = "Pr�fung fertig" No newline at end of file |
|
233 | Result 7 = "Pr�fung fertig" | |
| 204 | Result 8 = "Fehler" No newline at end of file |
|
234 | Result 8 = "Fehler" | |
| 205 | Result 9 = "Pr�fung Stop" No newline at end of file |
|
235 | Result 9 = "Pr�fung Stop" | |
| 206 | Result 10 = "Pr�fung Stop" No newline at end of file |
|
236 | Result 10 = "Pr�fung Stop" | |
| 207 | Result 11 = "Pr�fung Stop" No newline at end of file |
|
237 | Result 11 = "Pr�fung Stop" | |
| 208 | Result 12 = "Pr�fung Stop" No newline at end of file |
|
238 | Result 12 = "Pr�fung Stop" | |
| 209 | Result 13 = "Pr�fung Stop" No newline at end of file |
|
239 | Result 13 = "Pr�fung Stop" | |
| 210 | Result 14 = "Pr�fung Stop" No newline at end of file |
|
240 | Result 14 = "Pr�fung Stop" | |
| 211 | Result 15 = "Pr�fung Stop" No newline at end of file |
|
241 | Result 15 = "Pr�fung Stop" | |
| 212 | Result 16 = "Bereit" No newline at end of file |
|
242 | Result 16 = "Bereit" | |
| 213 | Result 17 = "Bereit" No newline at end of file |
|
243 | Result 17 = "Bereit" | |
| 214 | Result 18 = "Bereit" No newline at end of file |
|
244 | Result 18 = "Bereit" | |
| 215 | Result 19 = "Bereit" No newline at end of file |
|
245 | Result 19 = "Bereit" | |
| 216 | Result 20 = "Bereit" No newline at end of file |
|
246 | Result 20 = "Bereit" | |
| 217 | Result 21 = "Bereit" No newline at end of file |
|
247 | Result 21 = "Bereit" | |
| 218 | No newline at end of file |
|
248 | ||
| 219 | [DialogMessages] No newline at end of file |
|
249 | [DialogMessages] | |
| 220 | Messages.<size(s)> = "7" No newline at end of file |
|
250 | Messages.<size(s)> = "7" | |
| 221 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" No newline at end of file |
|
251 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 222 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
252 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 223 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
253 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 224 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" No newline at end of file |
|
254 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 225 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" No newline at end of file |
|
255 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 226 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" No newline at end of file |
|
256 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 227 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
257 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,329 +1,441 | |||||
| 1 | [Tester] No newline at end of file |
|
1 | [Tester] | |
| 2 | TesterType = "HSMP2" No newline at end of file |
|
2 | TesterType = "HSMP2" | |
| 3 | TesterName = "Hochstrommessplatz 2" No newline at end of file |
|
3 | TesterName = "Hochstrommessplatz 2" | |
| 4 | MaxCurrent = 2000 No newline at end of file |
|
4 | MaxCurrent = 2000 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| No newline at end of file |
|
6 | SensorsEnable.<size(s)> = "15" No newline at end of file | ||
| 6 | SensorsEnable.<size(s)> = "10" No newline at end of file |
|
|||
| 7 | SensorsEnable 0 = "True" No newline at end of file |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" No newline at end of file |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" No newline at end of file |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" No newline at end of file |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" No newline at end of file |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" No newline at end of file |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" |
|
13 | SensorsEnable 6 = "True" | |
| No newline at end of file |
|
14 | SensorsEnable 7 = "True" | ||
| 14 | SensorsEnable 7 = "False" |
|
No newline at end of file | ||
| No newline at end of file |
|
15 | SensorsEnable 8 = "True" | ||
| 15 | SensorsEnable 8 = "False" |
|
No newline at end of file | ||
| No newline at end of file |
|
16 | SensorsEnable 9 = "True" | ||
| 16 | SensorsEnable 9 = "False" |
|
No newline at end of file | ||
| No newline at end of file |
|
17 | SensorsEnable 10 = "True" | ||
| 17 | SensorsDescription.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
18 | SensorsEnable 11 = "True" | |||
|
|
No newline at end of file | ||||
|
|
19 | SensorsEnable 12 = "True" | |||
|
|
No newline at end of file | ||||
|
|
20 | SensorsEnable 13 = "True" | |||
|
|
No newline at end of file | ||||
|
|
21 | SensorsEnable 14 = "True" | |||
|
|
No newline at end of file | ||||
|
|
22 | SensorsDescription.<size(s)> = "15" No newline at end of file | |||
| 18 | SensorsDescription 0 = "NI-9212: Ch1" No newline at end of file |
|
23 | SensorsDescription 0 = "NI-9212: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9212: Ch2" No newline at end of file |
|
24 | SensorsDescription 1 = "NI-9212: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9212: Ch3" No newline at end of file |
|
25 | SensorsDescription 2 = "NI-9212: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9212: Ch4" |
|
26 | SensorsDescription 3 = "NI-9212: Ch4" | |
| No newline at end of file |
|
27 | SensorsDescription 4 = "NI-9219_1: Ch1" | ||
| 22 | SensorsDescription 4 = "NI-9219: Ch1" |
|
No newline at end of file | ||
| No newline at end of file |
|
28 | SensorsDescription 5 = "NI-9219_1: Ch2" | ||
| 23 | SensorsDescription 5 = "NI-9219: Ch2" |
|
No newline at end of file | ||
| No newline at end of file |
|
29 | SensorsDescription 6 = "NI-9219_1: Ch3" | ||
| 24 | SensorsDescription 6 = "NI-9219: Ch3" |
|
No newline at end of file | ||
| No newline at end of file |
|
30 | SensorsDescription 7 = "NI-9219_2: Ch1" | ||
| 25 | SensorsDescription 7 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
31 | SensorsDescription 8 = "NI-9219_2: Ch2" | ||
| 26 | SensorsDescription 8 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
32 | SensorsDescription 9 = "NI-9219_2: Ch3" | ||
| 27 | SensorsDescription 9 = "" No newline at end of file |
|
No newline at end of file | ||
|
|
33 | SensorsDescription 10 = "NI-9219_2: Ch4" | |||
|
|
No newline at end of file | ||||
|
|
34 | SensorsDescription 11 = "NI-9219_3: Ch1" | |||
|
|
No newline at end of file | ||||
|
|
35 | SensorsDescription 12 = "NI-9219_3: Ch2" | |||
|
|
No newline at end of file | ||||
|
|
36 | SensorsDescription 13 = "NI-9219_3: Ch3" | |||
|
|
No newline at end of file | ||||
|
|
37 | SensorsDescription 14 = "NI-9219_3: Ch4" No newline at end of file | |||
| 28 | VoltageDescription.<size(s)> = "4 2" No newline at end of file |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI-9215: Ch1" No newline at end of file |
|
39 | VoltageDescription 0 = "NI-9215: Ch1" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" No newline at end of file |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI-9215: Ch2" No newline at end of file |
|
41 | VoltageDescription 2 = "NI-9215: Ch2" | |
| 32 | VoltageDescription 3 = "Zero Flux- Spannung [V]" No newline at end of file |
|
42 | VoltageDescription 3 = "Zero Flux- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" No newline at end of file |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" No newline at end of file |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" No newline at end of file |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" No newline at end of file |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" No newline at end of file |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 | No newline at end of file |
|
48 | ||
| 39 | [Hardware] No newline at end of file |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True No newline at end of file |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "" No newline at end of file |
|
51 | DI_E-Stop = "" | |
| 42 | DI_Setup = "" No newline at end of file |
|
52 | DI_Setup = "" | |
| 43 | PowerSupply_VISAName = "COM4" No newline at end of file |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "0" No newline at end of file |
|
54 | PowerSupply_Address = "0" | |
| 45 | PowerSupply_Baudrate = "9600" No newline at end of file |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "10,000000" No newline at end of file |
|
56 | PowerSupply_OutputVoltage = "10,000000" | |
| 47 | PowerSupply_OverVoltageProtection = "9,800000" No newline at end of file |
|
57 | PowerSupply_OverVoltageProtection = "9,800000" | |
| 48 | PowerSupply_MinCurrent = "0" No newline at end of file |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False No newline at end of file |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "18000,000000" No newline at end of file |
|
60 | PowerSupply_WarningPower = "18000,000000" | |
| 51 | PowerSupply_AbortPower = "20000,000000" No newline at end of file |
|
61 | PowerSupply_AbortPower = "20000,000000" | |
| 52 | PowerSupply_PID = "FALSE" No newline at end of file |
|
62 | PowerSupply_PID = "FALSE" | |
| 53 | PowerSupply_PID_Time = "0,100000" No newline at end of file |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" No newline at end of file |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" No newline at end of file |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" No newline at end of file |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "0,000000" |
|
67 | AbortCurrentDifference = "0,000000" | |
| No newline at end of file |
|
68 | Measurement_Channels.<size(s)> = "17" No newline at end of file | ||
| 58 | Measurement_Channels.<size(s)> = "13" No newline at end of file |
|
|||
| 59 | Measurement_Channels 0 = "NI9215/ai0" No newline at end of file |
|
69 | Measurement_Channels 0 = "NI9215/ai0" | |
| 60 | Measurement_Channels 1 = "NI9215/ai1" No newline at end of file |
|
70 | Measurement_Channels 1 = "NI9215/ai1" | |
| 61 | Measurement_Channels 2 = "NI9212/ai0" No newline at end of file |
|
71 | Measurement_Channels 2 = "NI9212/ai0" | |
| 62 | Measurement_Channels 3 = "NI9212/ai1" No newline at end of file |
|
72 | Measurement_Channels 3 = "NI9212/ai1" | |
| 63 | Measurement_Channels 4 = "NI9212/ai2" No newline at end of file |
|
73 | Measurement_Channels 4 = "NI9212/ai2" | |
| 64 | Measurement_Channels 5 = "NI9212/ai3" |
|
74 | Measurement_Channels 5 = "NI9212/ai3" | |
| No newline at end of file |
|
75 | Measurement_Channels 6 = "NI9219_1/ai0" | ||
| 65 | Measurement_Channels 6 = "NI9219/ai0" |
|
No newline at end of file | ||
| No newline at end of file |
|
76 | Measurement_Channels 7 = "NI9219_1/ai1" | ||
| 66 | Measurement_Channels 7 = "NI9219/ai1" |
|
No newline at end of file | ||
| No newline at end of file |
|
77 | Measurement_Channels 8 = "NI9219_1/ai2" | ||
| 67 | Measurement_Channels 8 = "NI9219/ai2" |
|
No newline at end of file | ||
| No newline at end of file |
|
78 | Measurement_Channels 9 = "NI9219_2/ai0" | ||
| 68 | Measurement_Channels 9 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
79 | Measurement_Channels 10 = "NI9219_2/ai1" | ||
| 69 | Measurement_Channels 10 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
80 | Measurement_Channels 11 = "NI9219_2/ai2" | ||
| 70 | Measurement_Channels 11 = "" |
|
No newline at end of file | ||
| No newline at end of file |
|
81 | Measurement_Channels 12 = "NI9219_2/ai3" | ||
| 71 | Measurement_Channels 12 = "" No newline at end of file |
|
No newline at end of file | ||
|
|
82 | Measurement_Channels 13 = "NI9219_3/ai0" | |||
|
|
No newline at end of file | ||||
|
|
83 | Measurement_Channels 14 = "NI9219_3/ai1" | |||
|
|
No newline at end of file | ||||
|
|
84 | Measurement_Channels 15 = "NI9219_3/ai2" | |||
|
|
No newline at end of file | ||||
|
|
85 | Measurement_Channels 16 = "NI9219_3/ai3" No newline at end of file | |||
| 72 | ShuntResistance = "0,005" No newline at end of file |
|
86 | ShuntResistance = "0,005" | |
| 73 | Measurement_Check = False |
|
87 | Measurement_Check = False | |
| No newline at end of file |
|
88 | DMM_VISAName = "NI9219_1/ai3" No newline at end of file | ||
| 74 | DMM_VISAName = "NI9219/ai3" No newline at end of file |
|
|||
| 75 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,000000 10,000000" | |
| No newline at end of file |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | ||
| 76 | TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file | ||
| 77 | TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
|||
| 78 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" No newline at end of file |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 79 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 80 | AllowedContactFails = "2" No newline at end of file |
|
94 | AllowedContactFails = "2" | |
| 81 | No newline at end of file |
|
95 | ||
| 82 | [HSMP2] No newline at end of file |
|
96 | [HSMP2] | |
| 83 | DMM_Configuration.Maximum = "10,000000" |
|
97 | DMM_Configuration.Maximum = "10,000000" | |
| No newline at end of file |
|
98 | DMM_Configuration.Minimum = "0,000000" No newline at end of file | ||
| 84 | DMM_Configuration.Minimum = "-10,000000" No newline at end of file |
|
|||
| 85 | DMM_Configuration.Configuration = "2-Wire" No newline at end of file |
|
99 | DMM_Configuration.Configuration = "2-Wire" | |
| 86 | DMM_Configuration.CurrentExcitationSource = "Internal" |
|
100 | DMM_Configuration.CurrentExcitationSource = "Internal" | |
| No newline at end of file |
|
101 | DMM_Configuration.CurrentExcitationValue = "0,000500" No newline at end of file | ||
| 87 | DMM_Configuration.CurrentExcitationValue = "0,000100" No newline at end of file |
|
|||
| 88 | Configuration_AI_Voltage.<size(s)> = "2" No newline at end of file |
|
102 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 89 | Configuration_AI_Voltage 0.Maximum = "10,000000" No newline at end of file |
|
103 | Configuration_AI_Voltage 0.Maximum = "10,000000" | |
| 90 | Configuration_AI_Voltage 0.Minimum = "-10,000000" No newline at end of file |
|
104 | Configuration_AI_Voltage 0.Minimum = "-10,000000" | |
| 91 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" No newline at end of file |
|
105 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 92 | Configuration_AI_Voltage 1.Maximum = "10,000000" No newline at end of file |
|
106 | Configuration_AI_Voltage 1.Maximum = "10,000000" | |
| 93 | Configuration_AI_Voltage 1.Minimum = "0,000000" No newline at end of file |
|
107 | Configuration_AI_Voltage 1.Minimum = "0,000000" | |
| 94 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
108 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| No newline at end of file |
|
109 | Configuration_AI_Thermocouple.<size(s)> = "15" No newline at end of file | ||
| 95 | Configuration_AI_Thermocouple.<size(s)> = "10" No newline at end of file |
|
|||
| 96 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" No newline at end of file |
|
110 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 97 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" No newline at end of file |
|
111 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 98 | Configuration_AI_Thermocouple 0.Type = "K" No newline at end of file |
|
112 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 99 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" No newline at end of file |
|
113 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 100 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" No newline at end of file |
|
114 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" No newline at end of file |
|
115 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 102 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" No newline at end of file |
|
116 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 103 | Configuration_AI_Thermocouple 1.Type = "K" No newline at end of file |
|
117 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 104 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" No newline at end of file |
|
118 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 105 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" No newline at end of file |
|
119 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" No newline at end of file |
|
120 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 107 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" No newline at end of file |
|
121 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 108 | Configuration_AI_Thermocouple 2.Type = "K" No newline at end of file |
|
122 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 109 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" No newline at end of file |
|
123 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 110 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" No newline at end of file |
|
124 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" No newline at end of file |
|
125 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 112 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" No newline at end of file |
|
126 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 113 | Configuration_AI_Thermocouple 3.Type = "K" No newline at end of file |
|
127 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 114 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" No newline at end of file |
|
128 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 115 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" No newline at end of file |
|
129 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" No newline at end of file |
|
130 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 117 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" No newline at end of file |
|
131 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 118 | Configuration_AI_Thermocouple 4.Type = "K" No newline at end of file |
|
132 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 119 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" No newline at end of file |
|
133 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 120 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" No newline at end of file |
|
134 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" No newline at end of file |
|
135 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 122 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" No newline at end of file |
|
136 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 123 | Configuration_AI_Thermocouple 5.Type = "K" No newline at end of file |
|
137 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 124 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" No newline at end of file |
|
138 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 125 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" No newline at end of file |
|
139 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" No newline at end of file |
|
140 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 127 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" No newline at end of file |
|
141 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 128 | Configuration_AI_Thermocouple 6.Type = "K" No newline at end of file |
|
142 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 129 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" No newline at end of file |
|
143 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 130 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" No newline at end of file |
|
144 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" No newline at end of file |
|
145 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 132 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" No newline at end of file |
|
146 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 133 | Configuration_AI_Thermocouple 7.Type = "K" No newline at end of file |
|
147 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 134 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" No newline at end of file |
|
148 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 135 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" No newline at end of file |
|
149 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| 136 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" No newline at end of file |
|
150 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" | |
| 137 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" No newline at end of file |
|
151 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" | |
| 138 | Configuration_AI_Thermocouple 8.Type = "K" No newline at end of file |
|
152 | Configuration_AI_Thermocouple 8.Type = "K" | |
| 139 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" No newline at end of file |
|
153 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" | |
| 140 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" No newline at end of file |
|
154 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" | |
| 141 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" No newline at end of file |
|
155 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" | |
| 142 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" No newline at end of file |
|
156 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" | |
| 143 | Configuration_AI_Thermocouple 9.Type = "K" No newline at end of file |
|
157 | Configuration_AI_Thermocouple 9.Type = "K" | |
| 144 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" No newline at end of file |
|
158 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" | |
| 145 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" |
|
159 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" | |
| No newline at end of file |
|
160 | Configuration_AI_Thermocouple 10.Maximum = "250,000000" | ||
| 146 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" |
|
No newline at end of file | ||
| No newline at end of file |
|
161 | Configuration_AI_Thermocouple 10.Minimum = "-200,000000" | ||
| 147 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" No newline at end of file |
|
No newline at end of file | ||
|
|
162 | Configuration_AI_Thermocouple 10.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
163 | Configuration_AI_Thermocouple 10.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
164 | Configuration_AI_Thermocouple 10.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
165 | Configuration_AI_Thermocouple 11.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
166 | Configuration_AI_Thermocouple 11.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
167 | Configuration_AI_Thermocouple 11.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
168 | Configuration_AI_Thermocouple 11.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
169 | Configuration_AI_Thermocouple 11.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
170 | Configuration_AI_Thermocouple 12.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
171 | Configuration_AI_Thermocouple 12.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
172 | Configuration_AI_Thermocouple 12.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
173 | Configuration_AI_Thermocouple 12.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
174 | Configuration_AI_Thermocouple 12.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
175 | Configuration_AI_Thermocouple 13.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
176 | Configuration_AI_Thermocouple 13.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
177 | Configuration_AI_Thermocouple 13.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
178 | Configuration_AI_Thermocouple 13.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
179 | Configuration_AI_Thermocouple 13.CJC_Value = "10,000000" | |||
|
|
No newline at end of file | ||||
|
|
180 | Configuration_AI_Thermocouple 14.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
181 | Configuration_AI_Thermocouple 14.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
182 | Configuration_AI_Thermocouple 14.Type = "K" | |||
|
|
No newline at end of file | ||||
|
|
183 | Configuration_AI_Thermocouple 14.CJC_Source = "Built-In" | |||
|
|
No newline at end of file | ||||
|
|
184 | Configuration_AI_Thermocouple 14.CJC_Value = "25,000000" | |||
|
|
No newline at end of file | ||||
|
|
185 | Configuration_AI_NI9219_Resistance.<size(s)> = "11" | |||
|
|
No newline at end of file | ||||
|
|
186 | Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000" No newline at end of file | |||
| 148 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" |
|
187 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| No newline at end of file |
|
188 | Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire" No newline at end of file | ||
| 149 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" No newline at end of file |
|
|||
| 150 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" No newline at end of file |
|
189 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 151 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" No newline at end of file |
|
190 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 152 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" No newline at end of file |
|
191 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 153 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" No newline at end of file |
|
192 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
193 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
194 | Configuration_AI_NI9219_Resistance 1.Maximum = "800,000000" | ||
| 155 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
195 | Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000" | ||
| 156 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
196 | Configuration_AI_NI9219_Resistance 1.Configuration = "4-Wire" No newline at end of file | ||
| 157 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" No newline at end of file |
|
|||
| 158 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" No newline at end of file |
|
197 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 159 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" No newline at end of file |
|
198 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 160 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" No newline at end of file |
|
199 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 161 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" No newline at end of file |
|
200 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
201 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
202 | Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000" | ||
| 163 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
203 | Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000" No newline at end of file | ||
| 164 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" No newline at end of file |
|
|||
| 165 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" No newline at end of file |
|
204 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 166 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" No newline at end of file |
|
205 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 167 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" No newline at end of file |
|
206 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 168 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" No newline at end of file |
|
207 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 169 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" No newline at end of file |
|
208 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" No newline at end of file |
|
209 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 3,81E-3 -6,02E-7 -6E-12" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" |
|
210 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| No newline at end of file |
|
211 | Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000" No newline at end of file | ||
| 172 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" No newline at end of file |
|
|||
| 173 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" No newline at end of file |
|
212 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 174 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" No newline at end of file |
|
213 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 175 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" No newline at end of file |
|
214 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 176 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" No newline at end of file |
|
215 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 177 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" No newline at end of file |
|
216 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 178 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" |
|
217 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| No newline at end of file |
|
218 | Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000" | ||
| 179 | Configuration_AI_NI9219_Type.<size(s)> = "4" |
|
No newline at end of file | ||
| No newline at end of file |
|
219 | Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000" | ||
| 180 | Configuration_AI_NI9219_Type 0 = "Thermocouple" |
|
No newline at end of file | ||
| No newline at end of file |
|
220 | Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire" | ||
| 181 | Configuration_AI_NI9219_Type 1 = "Thermocouple" No newline at end of file |
|
No newline at end of file | ||
|
|
221 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
222 | Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
223 | Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
224 | Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
225 | Configuration_AI_NI9219_Resistance 4.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
226 | Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
227 | Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
228 | Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
229 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
230 | Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
231 | Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
232 | Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
233 | Configuration_AI_NI9219_Resistance 5.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
234 | Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
235 | Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
236 | Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
237 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
238 | Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
239 | Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
240 | Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
241 | Configuration_AI_NI9219_Resistance 6.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
No newline at end of file | ||||
|
|
242 | Configuration_AI_NI9219_Resistance 7.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
243 | Configuration_AI_NI9219_Resistance 7.Minimum = "-200,000000" | |||
|
|
No newline at end of file | ||||
|
|
244 | Configuration_AI_NI9219_Resistance 7.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
245 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
246 | Configuration_AI_NI9219_Resistance 7.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
247 | Configuration_AI_NI9219_Resistance 7.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
248 | Configuration_AI_NI9219_Resistance 7.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
249 | Configuration_AI_NI9219_Resistance 7.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
250 | Configuration_AI_NI9219_Resistance 8.Maximum = "200,000000" | |||
|
|
No newline at end of file | ||||
|
|
251 | Configuration_AI_NI9219_Resistance 8.Minimum = "-10,000000" | |||
|
|
No newline at end of file | ||||
|
|
252 | Configuration_AI_NI9219_Resistance 8.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
253 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
254 | Configuration_AI_NI9219_Resistance 8.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
255 | Configuration_AI_NI9219_Resistance 8.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
256 | Configuration_AI_NI9219_Resistance 8.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
257 | Configuration_AI_NI9219_Resistance 8.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
258 | Configuration_AI_NI9219_Resistance 9.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
259 | Configuration_AI_NI9219_Resistance 9.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
260 | Configuration_AI_NI9219_Resistance 9.Configuration = "4-Wire" | |||
|
|
No newline at end of file | ||||
|
|
261 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
262 | Configuration_AI_NI9219_Resistance 9.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
263 | Configuration_AI_NI9219_Resistance 9.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
264 | Configuration_AI_NI9219_Resistance 9.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
265 | Configuration_AI_NI9219_Resistance 9.ABC = "<size(s)=3> 0,001224 0,000231 3,938074E-9" | |||
|
|
No newline at end of file | ||||
|
|
266 | Configuration_AI_NI9219_Resistance 10.Maximum = "250,000000" | |||
|
|
No newline at end of file | ||||
|
|
267 | Configuration_AI_NI9219_Resistance 10.Minimum = "0,000000" | |||
|
|
No newline at end of file | ||||
|
|
268 | Configuration_AI_NI9219_Resistance 10.Configuration = "2-Wire" | |||
|
|
No newline at end of file | ||||
|
|
269 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationSource = "Internal" | |||
|
|
No newline at end of file | ||||
|
|
270 | Configuration_AI_NI9219_Resistance 10.CurrentExcitationValue = "0,000500" | |||
|
|
No newline at end of file | ||||
|
|
271 | Configuration_AI_NI9219_Resistance 10.RTD_Type = "Pt3750" | |||
|
|
No newline at end of file | ||||
|
|
272 | Configuration_AI_NI9219_Resistance 10.R0 = "1000,000000" | |||
|
|
No newline at end of file | ||||
|
|
273 | Configuration_AI_NI9219_Resistance 10.ABC = "<size(s)=3> 0,003810 -6,020000E-7 -6,000000E-12" | |||
|
|
No newline at end of file | ||||
|
|
274 | Configuration_AI_NI9219_Type.<size(s)> = "11" | |||
|
|
No newline at end of file | ||||
|
|
275 | Configuration_AI_NI9219_Type 0 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
276 | Configuration_AI_NI9219_Type 1 = "RTD" No newline at end of file | |||
| 182 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" |
|
277 | Configuration_AI_NI9219_Type 2 = "Resistance_RTD" | |
| No newline at end of file |
|
278 | Configuration_AI_NI9219_Type 3 = "Resistance_Thermistor" | ||
| 183 | Configuration_AI_NI9219_Type 3 = "Thermocouple" No newline at end of file |
|
No newline at end of file | ||
|
|
279 | Configuration_AI_NI9219_Type 4 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
280 | Configuration_AI_NI9219_Type 5 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
281 | Configuration_AI_NI9219_Type 6 = "Resistance_Thermistor" | |||
|
|
No newline at end of file | ||||
|
|
282 | Configuration_AI_NI9219_Type 7 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
283 | Configuration_AI_NI9219_Type 8 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
284 | Configuration_AI_NI9219_Type 9 = "RTD" | |||
|
|
No newline at end of file | ||||
|
|
285 | Configuration_AI_NI9219_Type 10 = "Resistance_RTD" No newline at end of file | |||
| 184 | POS_Config.IP = "10.1.2.1" No newline at end of file |
|
286 | POS_Config.IP = "10.1.2.1" | |
| 185 | POS_Config.Port = "502" No newline at end of file |
|
287 | POS_Config.Port = "502" | |
| 186 | POS_AxesNames.<size(s)> = "3" No newline at end of file |
|
288 | POS_AxesNames.<size(s)> = "3" | |
| 187 | POS_AxesNames 0 = "X" No newline at end of file |
|
289 | POS_AxesNames 0 = "X" | |
| 188 | POS_AxesNames 1 = "Y" No newline at end of file |
|
290 | POS_AxesNames 1 = "Y" | |
| 189 | POS_AxesNames 2 = "Z" No newline at end of file |
|
291 | POS_AxesNames 2 = "Z" | |
| 190 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" No newline at end of file |
|
292 | POS_Reference_Axes = "<size(s)=3> 1,000000 1,000000 110,000000" | |
| 191 | POS_Limits_Axis1 = "<size(s)=2> 0 210" No newline at end of file |
|
293 | POS_Limits_Axis1 = "<size(s)=2> 0 210" | |
| 192 | POS_Limits_Axis2 = "<size(s)=2> 0 242" No newline at end of file |
|
294 | POS_Limits_Axis2 = "<size(s)=2> 0 242" | |
| 193 | POS_Limits_Axis3 = "<size(s)=2> 0 111" No newline at end of file |
|
295 | POS_Limits_Axis3 = "<size(s)=2> 0 111" | |
| 194 | POS_AxesFlipped.<size(s)> = "3" No newline at end of file |
|
296 | POS_AxesFlipped.<size(s)> = "3" | |
| 195 | POS_AxesFlipped 0 = "True" No newline at end of file |
|
297 | POS_AxesFlipped 0 = "True" | |
| 196 | POS_AxesFlipped 1 = "True" No newline at end of file |
|
298 | POS_AxesFlipped 1 = "True" | |
| 197 | POS_AxesFlipped 2 = "False" No newline at end of file |
|
299 | POS_AxesFlipped 2 = "False" | |
| 198 | Pos_MaxVelocity = "300" No newline at end of file |
|
300 | Pos_MaxVelocity = "300" | |
| 199 | Pos_MaxAcceleration = "15000" No newline at end of file |
|
301 | Pos_MaxAcceleration = "15000" | |
| 200 | Pos_MaxJerk = "140000" No newline at end of file |
|
302 | Pos_MaxJerk = "140000" | |
| 201 | Pos_DO_E-Stop_Index = "0" No newline at end of file |
|
303 | Pos_DO_E-Stop_Index = "0" | |
| 202 | Pos_DO_Setup_Index = "1" No newline at end of file |
|
304 | Pos_DO_Setup_Index = "1" | |
| 203 | No newline at end of file |
|
305 | ||
| 204 | [DefaultValues] No newline at end of file |
|
306 | [DefaultValues] | |
| 205 | WorkingStroke = "0" |
|
307 | WorkingStroke = "0" | |
| No newline at end of file |
|
308 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file | ||
| 206 | MaxTemperature = "<size(s)=10> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file |
|
|||
| 207 | MeasurementTime = "1" No newline at end of file |
|
309 | MeasurementTime = "1" | |
| 208 | NominalCurrent = "0" No newline at end of file |
|
310 | NominalCurrent = "0" | |
| 209 | TableControl = False |
|
311 | TableControl = False | |
| No newline at end of file |
|
312 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | ||
| 210 | SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230" |
|
No newline at end of file | ||
| No newline at end of file |
|
313 | Sensors+.<size(s)> = "15" No newline at end of file | ||
| 211 | Sensors+.<size(s)> = "10" No newline at end of file |
|
|||
| 212 | Sensors+ 0 = "True" No newline at end of file |
|
314 | Sensors+ 0 = "True" | |
| 213 | Sensors+ 1 = "True" No newline at end of file |
|
315 | Sensors+ 1 = "True" | |
| 214 | Sensors+ 2 = "True" No newline at end of file |
|
316 | Sensors+ 2 = "True" | |
| 215 | Sensors+ 3 = "True" No newline at end of file |
|
317 | Sensors+ 3 = "True" | |
| 216 | Sensors+ 4 = "False" No newline at end of file |
|
318 | Sensors+ 4 = "False" | |
| 217 | Sensors+ 5 = "False" No newline at end of file |
|
319 | Sensors+ 5 = "False" | |
| 218 | Sensors+ 6 = "False" No newline at end of file |
|
320 | Sensors+ 6 = "False" | |
| 219 | Sensors+ 7 = "False" No newline at end of file |
|
321 | Sensors+ 7 = "False" | |
| 220 | Sensors+ 8 = "False" No newline at end of file |
|
322 | Sensors+ 8 = "False" | |
| 221 | Sensors+ 9 = "False" |
|
323 | Sensors+ 9 = "False" | |
| No newline at end of file |
|
324 | Sensors+ 10 = "False" | ||
| 222 | SensorsFunction.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
325 | Sensors+ 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
326 | Sensors+ 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
327 | Sensors+ 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
328 | Sensors+ 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
329 | SensorsFunction.<size(s)> = "15" No newline at end of file | |||
| 223 | SensorsFunction 0 = "Umgebungstemperatur" No newline at end of file |
|
330 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 224 | SensorsFunction 1 = "Pr�flingstemperatur" No newline at end of file |
|
331 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 225 | SensorsFunction 2 = "Temperatur 3" No newline at end of file |
|
332 | SensorsFunction 2 = "Temperatur 3" | |
| 226 | SensorsFunction 3 = "Temperatur 4" No newline at end of file |
|
333 | SensorsFunction 3 = "Temperatur 4" | |
| 227 | SensorsFunction 4 = "Temperatur 5" No newline at end of file |
|
334 | SensorsFunction 4 = "Temperatur 5" | |
| 228 | SensorsFunction 5 = "Temperatur 6" No newline at end of file |
|
335 | SensorsFunction 5 = "Temperatur 6" | |
| 229 | SensorsFunction 6 = "Temperatur 7" No newline at end of file |
|
336 | SensorsFunction 6 = "Temperatur 7" | |
| 230 | SensorsFunction 7 = "Temperatur 8" No newline at end of file |
|
337 | SensorsFunction 7 = "Temperatur 8" | |
| 231 | SensorsFunction 8 = "Temperatur 9" No newline at end of file |
|
338 | SensorsFunction 8 = "Temperatur 9" | |
| 232 | SensorsFunction 9 = "Temperatur 10" No newline at end of file |
|
339 | SensorsFunction 9 = "Temperatur 10" | |
|
|
340 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
No newline at end of file | ||||
|
|
341 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
No newline at end of file | ||||
|
|
342 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
No newline at end of file | ||||
|
|
343 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
No newline at end of file | ||||
|
|
344 | SensorsFunction 14 = "Temperatur 15" No newline at end of file | |||
| 233 | MovingParameter.Velocity = "20,000000" No newline at end of file |
|
345 | MovingParameter.Velocity = "20,000000" | |
| 234 | MovingParameter.Acceleration = "50,000000" No newline at end of file |
|
346 | MovingParameter.Acceleration = "50,000000" | |
| 235 | MovingParameter.Jerk = "140000,000000" No newline at end of file |
|
347 | MovingParameter.Jerk = "140000,000000" | |
| 236 | Learning_Steps.X = "1,000000" No newline at end of file |
|
348 | Learning_Steps.X = "1,000000" | |
| 237 | Learning_Steps.Y = "1,000000" No newline at end of file |
|
349 | Learning_Steps.Y = "1,000000" | |
| 238 | Learning_Steps.Z = "1,000000" No newline at end of file |
|
350 | Learning_Steps.Z = "1,000000" | |
| 239 | No newline at end of file |
|
351 | ||
| 240 | [Pathes] No newline at end of file |
|
352 | [Pathes] | |
| 241 | User = "C:\Work\CurrentTester\support\User.txt" No newline at end of file |
|
353 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 242 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" No newline at end of file |
|
354 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" | |
| 243 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" No newline at end of file |
|
355 | ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" | |
| 244 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" No newline at end of file |
|
356 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 245 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" No newline at end of file |
|
357 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 246 | No newline at end of file |
|
358 | ||
| 247 | [Report] No newline at end of file |
|
359 | [Report] | |
| 248 | FileNameFormat = "%s_TestResults.txt" No newline at end of file |
|
360 | FileNameFormat = "%s_TestResults.txt" | |
| 249 | ReportNameFormat = "%s_TestReport_%s.xlsx" No newline at end of file |
|
361 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 250 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" No newline at end of file |
|
362 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 251 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" No newline at end of file |
|
363 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 252 | No newline at end of file |
|
364 | ||
| 253 | [Protocol] No newline at end of file |
|
365 | [Protocol] | |
| 254 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" No newline at end of file |
|
366 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 255 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" No newline at end of file |
|
367 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 256 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" No newline at end of file |
|
368 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 257 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" No newline at end of file |
|
369 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 258 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" No newline at end of file |
|
370 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 259 | ProtocolDataFolderName = "Bilder|Messungen" No newline at end of file |
|
371 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 260 | No newline at end of file |
|
372 | ||
| 261 | [StateMessages] No newline at end of file |
|
373 | [StateMessages] | |
| 262 | Info.<size(s)> = "28" No newline at end of file |
|
374 | Info.<size(s)> = "28" | |
| 263 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" No newline at end of file |
|
375 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 264 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" No newline at end of file |
|
376 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 265 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" No newline at end of file |
|
377 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 266 | Info 3 = "Testdaten anlegen" No newline at end of file |
|
378 | Info 3 = "Testdaten anlegen" | |
| 267 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" No newline at end of file |
|
379 | Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 268 | Info 5 = "Test geladen" No newline at end of file |
|
380 | Info 5 = "Test geladen" | |
| 269 | Info 6 = "Laufende Pr�fung..." No newline at end of file |
|
381 | Info 6 = "Laufende Pr�fung..." | |
| 270 | Info 7 = "Pr�fung erfolgreich abgeschlossen" No newline at end of file |
|
382 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 271 | Info 8 = "Fehler aufgetreten!" No newline at end of file |
|
383 | Info 8 = "Fehler aufgetreten!" | |
| 272 | Info 9 = "Test abgebrochen!" No newline at end of file |
|
384 | Info 9 = "Test abgebrochen!" | |
| 273 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" No newline at end of file |
|
385 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 274 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" No newline at end of file |
|
386 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 275 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" No newline at end of file |
|
387 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 276 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" No newline at end of file |
|
388 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 277 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" No newline at end of file |
|
389 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 278 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" No newline at end of file |
|
390 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 279 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" No newline at end of file |
|
391 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 280 | Info 17 = "Testprotokoll erstellt" No newline at end of file |
|
392 | Info 17 = "Testprotokoll erstellt" | |
| 281 | Info 18 = "Der letzte Test ist geladen..." No newline at end of file |
|
393 | Info 18 = "Der letzte Test ist geladen..." | |
| 282 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" No newline at end of file |
|
394 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 283 | Info 20 = "Testbericht wird erstellt... Bitte warten" No newline at end of file |
|
395 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 284 | Info 21 = "Testbericht erstellt" No newline at end of file |
|
396 | Info 21 = "Testbericht erstellt" | |
| 285 | Info 22 = "Achsen werden initialisiert..." No newline at end of file |
|
397 | Info 22 = "Achsen werden initialisiert..." | |
| 286 | Info 23 = "Referenzfahrt l�uft..." No newline at end of file |
|
398 | Info 23 = "Referenzfahrt l�uft..." | |
| 287 | Info 24 = "X-Achse wird referenziert..." No newline at end of file |
|
399 | Info 24 = "X-Achse wird referenziert..." | |
| 288 | Info 25 = "Y-Achse wird referenziert..." No newline at end of file |
|
400 | Info 25 = "Y-Achse wird referenziert..." | |
| 289 | Info 26 = "Z-Achse wird referenziert..." No newline at end of file |
|
401 | Info 26 = "Z-Achse wird referenziert..." | |
| 290 | Info 27 = "Position wird angefahren..." No newline at end of file |
|
402 | Info 27 = "Position wird angefahren..." | |
| 291 | Result.<size(s)> = "28" No newline at end of file |
|
403 | Result.<size(s)> = "28" | |
| 292 | Result 0 = "Not-Halt" No newline at end of file |
|
404 | Result 0 = "Not-Halt" | |
| 293 | Result 1 = "" No newline at end of file |
|
405 | Result 1 = "" | |
| 294 | Result 2 = "Bereit" No newline at end of file |
|
406 | Result 2 = "Bereit" | |
| 295 | Result 3 = "Bereit" No newline at end of file |
|
407 | Result 3 = "Bereit" | |
| 296 | Result 4 = "Einrichtbetrieb" No newline at end of file |
|
408 | Result 4 = "Einrichtbetrieb" | |
| 297 | Result 5 = "Bereit" No newline at end of file |
|
409 | Result 5 = "Bereit" | |
| 298 | Result 6 = "Pr�fung l�uft" No newline at end of file |
|
410 | Result 6 = "Pr�fung l�uft" | |
| 299 | Result 7 = "Pr�fung fertig" No newline at end of file |
|
411 | Result 7 = "Pr�fung fertig" | |
| 300 | Result 8 = "Fehler" No newline at end of file |
|
412 | Result 8 = "Fehler" | |
| 301 | Result 9 = "Pr�fung Stop" No newline at end of file |
|
413 | Result 9 = "Pr�fung Stop" | |
| 302 | Result 10 = "Pr�fung Stop" No newline at end of file |
|
414 | Result 10 = "Pr�fung Stop" | |
| 303 | Result 11 = "Pr�fung Stop" No newline at end of file |
|
415 | Result 11 = "Pr�fung Stop" | |
| 304 | Result 12 = "Pr�fung Stop" No newline at end of file |
|
416 | Result 12 = "Pr�fung Stop" | |
| 305 | Result 13 = "Pr�fung Stop" No newline at end of file |
|
417 | Result 13 = "Pr�fung Stop" | |
| 306 | Result 14 = "Pr�fung Stop" No newline at end of file |
|
418 | Result 14 = "Pr�fung Stop" | |
| 307 | Result 15 = "Pr�fung Stop" No newline at end of file |
|
419 | Result 15 = "Pr�fung Stop" | |
| 308 | Result 16 = "Bereit" No newline at end of file |
|
420 | Result 16 = "Bereit" | |
| 309 | Result 17 = "Bereit" No newline at end of file |
|
421 | Result 17 = "Bereit" | |
| 310 | Result 18 = "Bereit" No newline at end of file |
|
422 | Result 18 = "Bereit" | |
| 311 | Result 19 = "Bereit" No newline at end of file |
|
423 | Result 19 = "Bereit" | |
| 312 | Result 20 = "Bereit" No newline at end of file |
|
424 | Result 20 = "Bereit" | |
| 313 | Result 21 = "Bereit" No newline at end of file |
|
425 | Result 21 = "Bereit" | |
| 314 | Result 22 = "" No newline at end of file |
|
426 | Result 22 = "" | |
| 315 | Result 23 = "Einrichtbetrieb" No newline at end of file |
|
427 | Result 23 = "Einrichtbetrieb" | |
| 316 | Result 24 = "Einrichtbetrieb" No newline at end of file |
|
428 | Result 24 = "Einrichtbetrieb" | |
| 317 | Result 25 = "Einrichtbetrieb" No newline at end of file |
|
429 | Result 25 = "Einrichtbetrieb" | |
| 318 | Result 26 = "Einrichtbetrieb" No newline at end of file |
|
430 | Result 26 = "Einrichtbetrieb" | |
| 319 | Result 27 = "Einrichtbetrieb" No newline at end of file |
|
431 | Result 27 = "Einrichtbetrieb" | |
| 320 | No newline at end of file |
|
432 | ||
| 321 | [DialogMessages] No newline at end of file |
|
433 | [DialogMessages] | |
| 322 | Messages.<size(s)> = "7" No newline at end of file |
|
434 | Messages.<size(s)> = "7" | |
| 323 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" No newline at end of file |
|
435 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 324 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
436 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 325 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
437 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 326 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" No newline at end of file |
|
438 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 327 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" No newline at end of file |
|
439 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 328 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" No newline at end of file |
|
440 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 329 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
441 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| @@ -1,290 +1,311 | |||||
| 1 | [Tester] No newline at end of file |
|
1 | [Tester] | |
| 2 | TesterType = "SMP3" No newline at end of file |
|
2 | TesterType = "SMP3" | |
| 3 | TesterName = "Strommessplatz 3" No newline at end of file |
|
3 | TesterName = "Strommessplatz 3" | |
| 4 | MaxCurrent = 130 No newline at end of file |
|
4 | MaxCurrent = 130 | |
| 5 | MaxTemperature = 250 |
|
5 | MaxTemperature = 250 | |
| No newline at end of file |
|
6 | SensorsEnable.<size(s)> = "15" No newline at end of file | ||
| 6 | SensorsEnable.<size(s)> = "10" No newline at end of file |
|
|||
| 7 | SensorsEnable 0 = "True" No newline at end of file |
|
7 | SensorsEnable 0 = "True" | |
| 8 | SensorsEnable 1 = "True" No newline at end of file |
|
8 | SensorsEnable 1 = "True" | |
| 9 | SensorsEnable 2 = "True" No newline at end of file |
|
9 | SensorsEnable 2 = "True" | |
| 10 | SensorsEnable 3 = "True" No newline at end of file |
|
10 | SensorsEnable 3 = "True" | |
| 11 | SensorsEnable 4 = "True" No newline at end of file |
|
11 | SensorsEnable 4 = "True" | |
| 12 | SensorsEnable 5 = "True" No newline at end of file |
|
12 | SensorsEnable 5 = "True" | |
| 13 | SensorsEnable 6 = "True" No newline at end of file |
|
13 | SensorsEnable 6 = "True" | |
| 14 | SensorsEnable 7 = "True" No newline at end of file |
|
14 | SensorsEnable 7 = "True" | |
| 15 | SensorsEnable 8 = "False" No newline at end of file |
|
15 | SensorsEnable 8 = "False" | |
| 16 | SensorsEnable 9 = "False" |
|
16 | SensorsEnable 9 = "False" | |
| No newline at end of file |
|
17 | SensorsEnable 10 = "False" | ||
| 17 | SensorsDescription.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
18 | SensorsEnable 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
19 | SensorsEnable 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
20 | SensorsEnable 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
21 | SensorsEnable 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
22 | SensorsDescription.<size(s)> = "15" No newline at end of file | |||
| 18 | SensorsDescription 0 = "NI-9210: Ch1" No newline at end of file |
|
23 | SensorsDescription 0 = "NI-9210: Ch1" | |
| 19 | SensorsDescription 1 = "NI-9210: Ch2" No newline at end of file |
|
24 | SensorsDescription 1 = "NI-9210: Ch2" | |
| 20 | SensorsDescription 2 = "NI-9210: Ch3" No newline at end of file |
|
25 | SensorsDescription 2 = "NI-9210: Ch3" | |
| 21 | SensorsDescription 3 = "NI-9210: Ch4" No newline at end of file |
|
26 | SensorsDescription 3 = "NI-9210: Ch4" | |
| 22 | SensorsDescription 4 = "NI-9219: Ch1" No newline at end of file |
|
27 | SensorsDescription 4 = "NI-9219: Ch1" | |
| 23 | SensorsDescription 5 = "NI-9219: Ch2" No newline at end of file |
|
28 | SensorsDescription 5 = "NI-9219: Ch2" | |
| 24 | SensorsDescription 6 = "NI-9219: Ch3" No newline at end of file |
|
29 | SensorsDescription 6 = "NI-9219: Ch3" | |
| 25 | SensorsDescription 7 = "NI-9219: Ch4" No newline at end of file |
|
30 | SensorsDescription 7 = "NI-9219: Ch4" | |
| 26 | SensorsDescription 8 = "" No newline at end of file |
|
31 | SensorsDescription 8 = "" | |
| 27 | SensorsDescription 9 = "" No newline at end of file |
|
32 | SensorsDescription 9 = "" | |
|
|
33 | SensorsDescription 10 = "" | |||
|
|
No newline at end of file | ||||
|
|
34 | SensorsDescription 11 = "" | |||
|
|
No newline at end of file | ||||
|
|
35 | SensorsDescription 12 = "" | |||
|
|
No newline at end of file | ||||
|
|
36 | SensorsDescription 13 = "" | |||
|
|
No newline at end of file | ||||
|
|
37 | SensorsDescription 14 = "" No newline at end of file | |||
| 28 | VoltageDescription.<size(s)> = "4 2" No newline at end of file |
|
38 | VoltageDescription.<size(s)> = "4 2" | |
| 29 | VoltageDescription 0 = "NI PXI-6281: Ch4" No newline at end of file |
|
39 | VoltageDescription 0 = "NI PXI-6281: Ch4" | |
| 30 | VoltageDescription 1 = "Pr�flingsspannung [V]" No newline at end of file |
|
40 | VoltageDescription 1 = "Pr�flingsspannung [V]" | |
| 31 | VoltageDescription 2 = "NI PXI-6281: Ch5" No newline at end of file |
|
41 | VoltageDescription 2 = "NI PXI-6281: Ch5" | |
| 32 | VoltageDescription 3 = "Shunt- Spannung [V]" No newline at end of file |
|
42 | VoltageDescription 3 = "Shunt- Spannung [V]" | |
| 33 | VoltageDescription 4 = "" No newline at end of file |
|
43 | VoltageDescription 4 = "" | |
| 34 | VoltageDescription 5 = "Strom [A]" No newline at end of file |
|
44 | VoltageDescription 5 = "Strom [A]" | |
| 35 | VoltageDescription 6 = "" No newline at end of file |
|
45 | VoltageDescription 6 = "" | |
| 36 | VoltageDescription 7 = "Widerstand [mOhm]" No newline at end of file |
|
46 | VoltageDescription 7 = "Widerstand [mOhm]" | |
| 37 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" No newline at end of file |
|
47 | CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" | |
| 38 | No newline at end of file |
|
48 | ||
| 39 | [Hardware] No newline at end of file |
|
49 | [Hardware] | |
| 40 | SimulateDevices = True No newline at end of file |
|
50 | SimulateDevices = True | |
| 41 | DI_E-Stop = "PXI1Slot5/port0/line5" No newline at end of file |
|
51 | DI_E-Stop = "PXI1Slot5/port0/line5" | |
| 42 | DI_Setup = "PXI1Slot5/port0/line4" No newline at end of file |
|
52 | DI_Setup = "PXI1Slot5/port0/line4" | |
| 43 | PowerSupply_VISAName = "COM4" No newline at end of file |
|
53 | PowerSupply_VISAName = "COM4" | |
| 44 | PowerSupply_Address = "1" No newline at end of file |
|
54 | PowerSupply_Address = "1" | |
| 45 | PowerSupply_Baudrate = "9600" No newline at end of file |
|
55 | PowerSupply_Baudrate = "9600" | |
| 46 | PowerSupply_OutputVoltage = "5,500000" No newline at end of file |
|
56 | PowerSupply_OutputVoltage = "5,500000" | |
| 47 | PowerSupply_OverVoltageProtection = "6,000000" No newline at end of file |
|
57 | PowerSupply_OverVoltageProtection = "6,000000" | |
| 48 | PowerSupply_MinCurrent = "0" No newline at end of file |
|
58 | PowerSupply_MinCurrent = "0" | |
| 49 | PowerSupply_Check = False No newline at end of file |
|
59 | PowerSupply_Check = False | |
| 50 | PowerSupply_WarningPower = "780,000000" No newline at end of file |
|
60 | PowerSupply_WarningPower = "780,000000" | |
| 51 | PowerSupply_AbortPower = "790,000000" No newline at end of file |
|
61 | PowerSupply_AbortPower = "790,000000" | |
| 52 | PowerSupply_PID = "False" No newline at end of file |
|
62 | PowerSupply_PID = "False" | |
| 53 | PowerSupply_PID_Time = "0,100000" No newline at end of file |
|
63 | PowerSupply_PID_Time = "0,100000" | |
| 54 | PowerSupply_PID_ProportionalGain = "0,100000" No newline at end of file |
|
64 | PowerSupply_PID_ProportionalGain = "0,100000" | |
| 55 | PowerSupply_PID_IntegralTime = "0,180000" No newline at end of file |
|
65 | PowerSupply_PID_IntegralTime = "0,180000" | |
| 56 | PowerSupply_PID_DerivativeTime = "0,000000" No newline at end of file |
|
66 | PowerSupply_PID_DerivativeTime = "0,000000" | |
| 57 | AbortCurrentDifference = "50" |
|
67 | AbortCurrentDifference = "50" | |
| No newline at end of file |
|
68 | Measurement_Channels.<size(s)> = "17" No newline at end of file | ||
| 58 | Measurement_Channels.<size(s)> = "12" No newline at end of file |
|
|||
| 59 | Measurement_Channels 0 = "PXI1Slot5/ai4" No newline at end of file |
|
69 | Measurement_Channels 0 = "PXI1Slot5/ai4" | |
| 60 | Measurement_Channels 1 = "PXI1Slot5/ai5" No newline at end of file |
|
70 | Measurement_Channels 1 = "PXI1Slot5/ai5" | |
| 61 | Measurement_Channels 2 = "NI9210/ai0" No newline at end of file |
|
71 | Measurement_Channels 2 = "NI9210/ai0" | |
| 62 | Measurement_Channels 3 = "NI9210/ai1" No newline at end of file |
|
72 | Measurement_Channels 3 = "NI9210/ai1" | |
| 63 | Measurement_Channels 4 = "NI9210/ai2" No newline at end of file |
|
73 | Measurement_Channels 4 = "NI9210/ai2" | |
| 64 | Measurement_Channels 5 = "NI9210/ai3" No newline at end of file |
|
74 | Measurement_Channels 5 = "NI9210/ai3" | |
| 65 | Measurement_Channels 6 = "NI9219/ai0" No newline at end of file |
|
75 | Measurement_Channels 6 = "NI9219/ai0" | |
| 66 | Measurement_Channels 7 = "NI9219/ai1" No newline at end of file |
|
76 | Measurement_Channels 7 = "NI9219/ai1" | |
| 67 | Measurement_Channels 8 = "NI9219/ai2" No newline at end of file |
|
77 | Measurement_Channels 8 = "NI9219/ai2" | |
| 68 | Measurement_Channels 9 = "NI9219/ai3" No newline at end of file |
|
78 | Measurement_Channels 9 = "NI9219/ai3" | |
| 69 | Measurement_Channels 10 = "" No newline at end of file |
|
79 | Measurement_Channels 10 = "" | |
| 70 | Measurement_Channels 11 = "" No newline at end of file |
|
80 | Measurement_Channels 11 = "" | |
|
|
81 | Measurement_Channels 12 = "" | |||
|
|
No newline at end of file | ||||
|
|
82 | Measurement_Channels 13 = "" | |||
|
|
No newline at end of file | ||||
|
|
83 | Measurement_Channels 14 = "" | |||
|
|
No newline at end of file | ||||
|
|
84 | Measurement_Channels 15 = "" | |||
|
|
No newline at end of file | ||||
|
|
85 | Measurement_Channels 16 = "" No newline at end of file | |||
| 71 | ShuntResistance = 0,001 No newline at end of file |
|
86 | ShuntResistance = 0,001 | |
| 72 | Measurement_Check = False No newline at end of file |
|
87 | Measurement_Check = False | |
| 73 | DMM_VISAName = "PXI1Slot3" No newline at end of file |
|
88 | DMM_VISAName = "PXI1Slot3" | |
| 74 | DMM_ContactLimits = "<size(s)=2> 0,0 1,0" |
|
89 | DMM_ContactLimits = "<size(s)=2> 0,0 1,0" | |
| No newline at end of file |
|
90 | TemperatureGain = "<size(s)=15> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" | ||
| 75 | TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" |
|
No newline at end of file | ||
| No newline at end of file |
|
91 | TemperatureOffset = "<size(s)=15> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file | ||
| 76 | TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
|||
| 77 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" No newline at end of file |
|
92 | VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000" | |
| 78 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" No newline at end of file |
|
93 | VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000" | |
| 79 | AllowedContactFails = "2" No newline at end of file |
|
94 | AllowedContactFails = "2" | |
| 80 | No newline at end of file |
|
95 | ||
| 81 | [SMP3] No newline at end of file |
|
96 | [SMP3] | |
| 82 | DMM_Function = "2-wire Resistance" No newline at end of file |
|
97 | DMM_Function = "2-wire Resistance" | |
| 83 | DMM_AutoRange = False No newline at end of file |
|
98 | DMM_AutoRange = False | |
| 84 | DMM_Range = "0,020000" No newline at end of file |
|
99 | DMM_Range = "0,020000" | |
| 85 | DMM_Resolution = "0,001000" No newline at end of file |
|
100 | DMM_Resolution = "0,001000" | |
| 86 | Configuration_AI_Voltage.<size(s)> = "2" No newline at end of file |
|
101 | Configuration_AI_Voltage.<size(s)> = "2" | |
| 87 | Configuration_AI_Voltage 0.Maximum = "5,000000" No newline at end of file |
|
102 | Configuration_AI_Voltage 0.Maximum = "5,000000" | |
| 88 | Configuration_AI_Voltage 0.Minimum = "-5,000000" No newline at end of file |
|
103 | Configuration_AI_Voltage 0.Minimum = "-5,000000" | |
| 89 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" No newline at end of file |
|
104 | Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" | |
| 90 | Configuration_AI_Voltage 1.Maximum = "1,000000" No newline at end of file |
|
105 | Configuration_AI_Voltage 1.Maximum = "1,000000" | |
| 91 | Configuration_AI_Voltage 1.Minimum = "-1,000000" No newline at end of file |
|
106 | Configuration_AI_Voltage 1.Minimum = "-1,000000" | |
| 92 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" |
|
107 | Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" | |
| No newline at end of file |
|
108 | Configuration_AI_Thermocouple.<size(s)> = "8" No newline at end of file | ||
| 93 | Configuration_AI_Thermocouple.<size(s)> = "10" No newline at end of file |
|
|||
| 94 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" No newline at end of file |
|
109 | Configuration_AI_Thermocouple 0.Maximum = "250,000000" | |
| 95 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" No newline at end of file |
|
110 | Configuration_AI_Thermocouple 0.Minimum = "-200,000000" | |
| 96 | Configuration_AI_Thermocouple 0.Type = "K" No newline at end of file |
|
111 | Configuration_AI_Thermocouple 0.Type = "K" | |
| 97 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" No newline at end of file |
|
112 | Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" | |
| 98 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" No newline at end of file |
|
113 | Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" | |
| 99 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" No newline at end of file |
|
114 | Configuration_AI_Thermocouple 1.Maximum = "250,000000" | |
| 100 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" No newline at end of file |
|
115 | Configuration_AI_Thermocouple 1.Minimum = "-200,000000" | |
| 101 | Configuration_AI_Thermocouple 1.Type = "K" No newline at end of file |
|
116 | Configuration_AI_Thermocouple 1.Type = "K" | |
| 102 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" No newline at end of file |
|
117 | Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" | |
| 103 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" No newline at end of file |
|
118 | Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" | |
| 104 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" No newline at end of file |
|
119 | Configuration_AI_Thermocouple 2.Maximum = "250,000000" | |
| 105 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" No newline at end of file |
|
120 | Configuration_AI_Thermocouple 2.Minimum = "-200,000000" | |
| 106 | Configuration_AI_Thermocouple 2.Type = "K" No newline at end of file |
|
121 | Configuration_AI_Thermocouple 2.Type = "K" | |
| 107 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" No newline at end of file |
|
122 | Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" | |
| 108 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" No newline at end of file |
|
123 | Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" | |
| 109 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" No newline at end of file |
|
124 | Configuration_AI_Thermocouple 3.Maximum = "250,000000" | |
| 110 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" No newline at end of file |
|
125 | Configuration_AI_Thermocouple 3.Minimum = "-200,000000" | |
| 111 | Configuration_AI_Thermocouple 3.Type = "K" No newline at end of file |
|
126 | Configuration_AI_Thermocouple 3.Type = "K" | |
| 112 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" No newline at end of file |
|
127 | Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" | |
| 113 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" No newline at end of file |
|
128 | Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" | |
| 114 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" No newline at end of file |
|
129 | Configuration_AI_Thermocouple 4.Maximum = "250,000000" | |
| 115 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" No newline at end of file |
|
130 | Configuration_AI_Thermocouple 4.Minimum = "-200,000000" | |
| 116 | Configuration_AI_Thermocouple 4.Type = "K" No newline at end of file |
|
131 | Configuration_AI_Thermocouple 4.Type = "K" | |
| 117 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" No newline at end of file |
|
132 | Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" | |
| 118 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" No newline at end of file |
|
133 | Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" | |
| 119 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" No newline at end of file |
|
134 | Configuration_AI_Thermocouple 5.Maximum = "250,000000" | |
| 120 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" No newline at end of file |
|
135 | Configuration_AI_Thermocouple 5.Minimum = "-200,000000" | |
| 121 | Configuration_AI_Thermocouple 5.Type = "K" No newline at end of file |
|
136 | Configuration_AI_Thermocouple 5.Type = "K" | |
| 122 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" No newline at end of file |
|
137 | Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" | |
| 123 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" No newline at end of file |
|
138 | Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" | |
| 124 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" No newline at end of file |
|
139 | Configuration_AI_Thermocouple 6.Maximum = "250,000000" | |
| 125 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" No newline at end of file |
|
140 | Configuration_AI_Thermocouple 6.Minimum = "-200,000000" | |
| 126 | Configuration_AI_Thermocouple 6.Type = "K" No newline at end of file |
|
141 | Configuration_AI_Thermocouple 6.Type = "K" | |
| 127 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" No newline at end of file |
|
142 | Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" | |
| 128 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" No newline at end of file |
|
143 | Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" | |
| 129 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" No newline at end of file |
|
144 | Configuration_AI_Thermocouple 7.Maximum = "250,000000" | |
| 130 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" No newline at end of file |
|
145 | Configuration_AI_Thermocouple 7.Minimum = "-200,000000" | |
| 131 | Configuration_AI_Thermocouple 7.Type = "K" No newline at end of file |
|
146 | Configuration_AI_Thermocouple 7.Type = "K" | |
| 132 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" No newline at end of file |
|
147 | Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" | |
| 133 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" |
|
148 | Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" | |
| No newline at end of file |
|
||||
| 134 | Configuration_AI_Thermocouple 8.Maximum = "250,000000" |
|
|||
| No newline at end of file |
|
||||
| 135 | Configuration_AI_Thermocouple 8.Minimum = "-200,000000" |
|
|||
| No newline at end of file |
|
||||
| 136 | Configuration_AI_Thermocouple 8.Type = "K" |
|
|||
| No newline at end of file |
|
||||
| 137 | Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" |
|
|||
| No newline at end of file |
|
||||
| 138 | Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" |
|
|||
| No newline at end of file |
|
||||
| 139 | Configuration_AI_Thermocouple 9.Maximum = "250,000000" |
|
|||
| No newline at end of file |
|
||||
| 140 | Configuration_AI_Thermocouple 9.Minimum = "-200,000000" |
|
|||
| No newline at end of file |
|
||||
| 141 | Configuration_AI_Thermocouple 9.Type = "K" |
|
|||
| No newline at end of file |
|
||||
| 142 | Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" |
|
|||
| No newline at end of file |
|
||||
| 143 | Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" No newline at end of file |
|
|||
| 144 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" No newline at end of file |
|
149 | Configuration_AI_NI9219_Resistance.<size(s)> = "4" | |
| 145 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" No newline at end of file |
|
150 | Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000" | |
| 146 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" No newline at end of file |
|
151 | Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" | |
| 147 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" No newline at end of file |
|
152 | Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire" | |
| 148 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" No newline at end of file |
|
153 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" | |
| 149 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" No newline at end of file |
|
154 | Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" | |
| 150 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" No newline at end of file |
|
155 | Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" | |
| 151 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" No newline at end of file |
|
156 | Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" | |
| 152 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" No newline at end of file |
|
157 | Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 153 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" No newline at end of file |
|
158 | Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" | |
| 154 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" No newline at end of file |
|
159 | Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000" | |
| 155 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" No newline at end of file |
|
160 | Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" | |
| 156 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" No newline at end of file |
|
161 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" | |
| 157 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" No newline at end of file |
|
162 | Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" | |
| 158 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" No newline at end of file |
|
163 | Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" | |
| 159 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" No newline at end of file |
|
164 | Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" | |
| 160 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" No newline at end of file |
|
165 | Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 161 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" No newline at end of file |
|
166 | Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" | |
| 162 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" No newline at end of file |
|
167 | Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000" | |
| 163 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" No newline at end of file |
|
168 | Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" | |
| 164 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" No newline at end of file |
|
169 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" | |
| 165 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" No newline at end of file |
|
170 | Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" | |
| 166 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" No newline at end of file |
|
171 | Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" | |
| 167 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" No newline at end of file |
|
172 | Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" | |
| 168 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" No newline at end of file |
|
173 | Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 169 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" No newline at end of file |
|
174 | Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" | |
| 170 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" No newline at end of file |
|
175 | Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000" | |
| 171 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" No newline at end of file |
|
176 | Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" | |
| 172 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" No newline at end of file |
|
177 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" | |
| 173 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" No newline at end of file |
|
178 | Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" | |
| 174 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" No newline at end of file |
|
179 | Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" | |
| 175 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" No newline at end of file |
|
180 | Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" | |
| 176 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" No newline at end of file |
|
181 | Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9" | |
| 177 | Configuration_AI_NI9219_Type.<size(s)> = "4" No newline at end of file |
|
182 | Configuration_AI_NI9219_Type.<size(s)> = "4" | |
| 178 | Configuration_AI_NI9219_Type 0 = "Thermocouple" No newline at end of file |
|
183 | Configuration_AI_NI9219_Type 0 = "Thermocouple" | |
| 179 | Configuration_AI_NI9219_Type 1 = "Thermocouple" No newline at end of file |
|
184 | Configuration_AI_NI9219_Type 1 = "Thermocouple" | |
| 180 | Configuration_AI_NI9219_Type 2 = "Thermocouple" No newline at end of file |
|
185 | Configuration_AI_NI9219_Type 2 = "Thermocouple" | |
| 181 | Configuration_AI_NI9219_Type 3 = "Thermocouple" No newline at end of file |
|
186 | Configuration_AI_NI9219_Type 3 = "Thermocouple" | |
| 182 | No newline at end of file |
|
187 | ||
| 183 | [DefaultValues] No newline at end of file |
|
188 | [DefaultValues] | |
| 184 | WorkingStroke = "0" |
|
189 | WorkingStroke = "0" | |
| No newline at end of file |
|
190 | MaxTemperature = "<size(s)=15> 50,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000 250,000000" No newline at end of file | ||
| 185 | MaxTemperature = "<size(s)=10> 50,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000" No newline at end of file |
|
|||
| 186 | MeasurementTime = "1" No newline at end of file |
|
191 | MeasurementTime = "1" | |
| 187 | NominalCurrent = "0" No newline at end of file |
|
192 | NominalCurrent = "0" | |
| 188 | TableControl = False |
|
193 | TableControl = False | |
| No newline at end of file |
|
194 | SensorsColor = "<size(s)=15> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230 14869218 14869218 14869218 14869218 14869218" | ||
| 189 | SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230" |
|
No newline at end of file | ||
| No newline at end of file |
|
195 | Sensors+.<size(s)> = "15" No newline at end of file | ||
| 190 | Sensors+.<size(s)> = "10" No newline at end of file |
|
|||
| 191 | Sensors+ 0 = "True" No newline at end of file |
|
196 | Sensors+ 0 = "True" | |
| 192 | Sensors+ 1 = "True" No newline at end of file |
|
197 | Sensors+ 1 = "True" | |
| 193 | Sensors+ 2 = "True" No newline at end of file |
|
198 | Sensors+ 2 = "True" | |
| 194 | Sensors+ 3 = "True" No newline at end of file |
|
199 | Sensors+ 3 = "True" | |
| 195 | Sensors+ 4 = "False" No newline at end of file |
|
200 | Sensors+ 4 = "False" | |
| 196 | Sensors+ 5 = "False" No newline at end of file |
|
201 | Sensors+ 5 = "False" | |
| 197 | Sensors+ 6 = "False" No newline at end of file |
|
202 | Sensors+ 6 = "False" | |
| 198 | Sensors+ 7 = "False" No newline at end of file |
|
203 | Sensors+ 7 = "False" | |
| 199 | Sensors+ 8 = "False" No newline at end of file |
|
204 | Sensors+ 8 = "False" | |
| 200 | Sensors+ 9 = "False" |
|
205 | Sensors+ 9 = "False" | |
| No newline at end of file |
|
206 | Sensors+ 10 = "False" | ||
| 201 | SensorsFunction.<size(s)> = "10" No newline at end of file |
|
No newline at end of file | ||
|
|
207 | Sensors+ 11 = "False" | |||
|
|
No newline at end of file | ||||
|
|
208 | Sensors+ 12 = "False" | |||
|
|
No newline at end of file | ||||
|
|
209 | Sensors+ 13 = "False" | |||
|
|
No newline at end of file | ||||
|
|
210 | Sensors+ 14 = "False" | |||
|
|
No newline at end of file | ||||
|
|
211 | SensorsFunction.<size(s)> = "15" No newline at end of file | |||
| 202 | SensorsFunction 0 = "Umgebungstemperatur" No newline at end of file |
|
212 | SensorsFunction 0 = "Umgebungstemperatur" | |
| 203 | SensorsFunction 1 = "Pr�flingstemperatur" No newline at end of file |
|
213 | SensorsFunction 1 = "Pr�flingstemperatur" | |
| 204 | SensorsFunction 2 = "Temperatur 3" No newline at end of file |
|
214 | SensorsFunction 2 = "Temperatur 3" | |
| 205 | SensorsFunction 3 = "Temperatur 4" No newline at end of file |
|
215 | SensorsFunction 3 = "Temperatur 4" | |
| 206 | SensorsFunction 4 = "Temperatur 5" No newline at end of file |
|
216 | SensorsFunction 4 = "Temperatur 5" | |
| 207 | SensorsFunction 5 = "Temperatur 6" No newline at end of file |
|
217 | SensorsFunction 5 = "Temperatur 6" | |
| 208 | SensorsFunction 6 = "Temperatur 7" No newline at end of file |
|
218 | SensorsFunction 6 = "Temperatur 7" | |
| 209 | SensorsFunction 7 = "Temperatur 8" No newline at end of file |
|
219 | SensorsFunction 7 = "Temperatur 8" | |
| 210 | SensorsFunction 8 = "Temperatur 9" No newline at end of file |
|
220 | SensorsFunction 8 = "Temperatur 9" | |
| 211 | SensorsFunction 9 = "Temperatur 10" No newline at end of file |
|
221 | SensorsFunction 9 = "Temperatur 10" | |
|
|
222 | SensorsFunction 10 = "Temperatur 11" | |||
|
|
No newline at end of file | ||||
|
|
223 | SensorsFunction 11 = "Temperatur 12" | |||
|
|
No newline at end of file | ||||
|
|
224 | SensorsFunction 12 = "Temperatur 13" | |||
|
|
No newline at end of file | ||||
|
|
225 | SensorsFunction 13 = "Temperatur 14" | |||
|
|
No newline at end of file | ||||
|
|
226 | SensorsFunction 14 = "Temperatur 15" | |||
|
|
No newline at end of file | ||||
|
|
227 | MovingParameter.Velocity = "20,000000" | |||
|
|
No newline at end of file | ||||
|
|
228 | MovingParameter.Acceleration = "50,000000" | |||
|
|
No newline at end of file | ||||
|
|
229 | MovingParameter.Jerk = "140000,000000" | |||
|
|
No newline at end of file | ||||
|
|
230 | Learning_Steps.X = "1,000000" | |||
|
|
No newline at end of file | ||||
|
|
231 | Learning_Steps.Y = "1,000000" | |||
|
|
No newline at end of file | ||||
|
|
232 | Learning_Steps.Z = "1,000000" No newline at end of file | |||
| 212 | No newline at end of file |
|
233 | ||
| 213 | [Pathes] No newline at end of file |
|
234 | [Pathes] | |
| 214 | User = "C:\Work\CurrentTester\support\User.txt" No newline at end of file |
|
235 | User = "C:\Work\CurrentTester\support\User.txt" | |
| 215 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3" No newline at end of file |
|
236 | ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3" | |
| 216 | ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen" No newline at end of file |
|
237 | ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen" | |
| 217 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" No newline at end of file |
|
238 | CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" | |
| 218 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" No newline at end of file |
|
239 | Applicants = "C:\Work\CurrentTester\support\Applicants.txt" | |
| 219 | No newline at end of file |
|
240 | ||
| 220 | [Report] No newline at end of file |
|
241 | [Report] | |
| 221 | FileNameFormat = "%s_TestResults.txt" No newline at end of file |
|
242 | FileNameFormat = "%s_TestResults.txt" | |
| 222 | ReportNameFormat = "%s_TestReport_%s.xlsx" No newline at end of file |
|
243 | ReportNameFormat = "%s_TestReport_%s.xlsx" | |
| 223 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" No newline at end of file |
|
244 | ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx" | |
| 224 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" No newline at end of file |
|
245 | ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx" | |
| 225 | No newline at end of file |
|
246 | ||
| 226 | [Protocol] No newline at end of file |
|
247 | [Protocol] | |
| 227 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" No newline at end of file |
|
248 | ProtocolNameFormat = "%s_A%d_Report_%s.docx" | |
| 228 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" No newline at end of file |
|
249 | ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx" | |
| 229 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" No newline at end of file |
|
250 | ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx" | |
| 230 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" No newline at end of file |
|
251 | ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!" | |
| 231 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" No newline at end of file |
|
252 | ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!" | |
| 232 | ProtocolDataFolderName = "Bilder|Messungen" No newline at end of file |
|
253 | ProtocolDataFolderName = "Bilder|Messungen" | |
| 233 | No newline at end of file |
|
254 | ||
| 234 | [StateMessages] No newline at end of file |
|
255 | [StateMessages] | |
| 235 | Info.<size(s)> = "22" No newline at end of file |
|
256 | Info.<size(s)> = "22" | |
| 236 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" No newline at end of file |
|
257 | Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" | |
| 237 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" No newline at end of file |
|
258 | Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" | |
| 238 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" No newline at end of file |
|
259 | Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" | |
| 239 | Info 3 = "Testdaten anlegen" No newline at end of file |
|
260 | Info 3 = "Testdaten anlegen" | |
| 240 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" No newline at end of file |
|
261 | Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" | |
| 241 | Info 5 = "Test geladen" No newline at end of file |
|
262 | Info 5 = "Test geladen" | |
| 242 | Info 6 = "Laufende Pr�fung..." No newline at end of file |
|
263 | Info 6 = "Laufende Pr�fung..." | |
| 243 | Info 7 = "Pr�fung erfolgreich abgeschlossen" No newline at end of file |
|
264 | Info 7 = "Pr�fung erfolgreich abgeschlossen" | |
| 244 | Info 8 = "Fehler aufgetreten!" No newline at end of file |
|
265 | Info 8 = "Fehler aufgetreten!" | |
| 245 | Info 9 = "Test abgebrochen!" No newline at end of file |
|
266 | Info 9 = "Test abgebrochen!" | |
| 246 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" No newline at end of file |
|
267 | Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten" | |
| 247 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" No newline at end of file |
|
268 | Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung" | |
| 248 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" No newline at end of file |
|
269 | Info 12 = "Test abgebrochen! Messrate ist zu hoch" | |
| 249 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" No newline at end of file |
|
270 | Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen" | |
| 250 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" No newline at end of file |
|
271 | Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht" | |
| 251 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" No newline at end of file |
|
272 | Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs" | |
| 252 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" No newline at end of file |
|
273 | Info 16 = "Testprotokoll wird erstellt... Bitte warten" | |
| 253 | Info 17 = "Testprotokoll erstellt" No newline at end of file |
|
274 | Info 17 = "Testprotokoll erstellt" | |
| 254 | Info 18 = "Der letzte Test ist geladen..." No newline at end of file |
|
275 | Info 18 = "Der letzte Test ist geladen..." | |
| 255 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" No newline at end of file |
|
276 | Info 19 = "Testdaten zur Testberichterstellung laden und ausw�hlen" | |
| 256 | Info 20 = "Testbericht wird erstellt... Bitte warten" No newline at end of file |
|
277 | Info 20 = "Testbericht wird erstellt... Bitte warten" | |
| 257 | Info 21 = "Testbericht erstellt" No newline at end of file |
|
278 | Info 21 = "Testbericht erstellt" | |
| 258 | Result.<size(s)> = "22" No newline at end of file |
|
279 | Result.<size(s)> = "22" | |
| 259 | Result 0 = "Not-Halt" No newline at end of file |
|
280 | Result 0 = "Not-Halt" | |
| 260 | Result 1 = "" No newline at end of file |
|
281 | Result 1 = "" | |
| 261 | Result 2 = "Bereit" No newline at end of file |
|
282 | Result 2 = "Bereit" | |
| 262 | Result 3 = "Bereit" No newline at end of file |
|
283 | Result 3 = "Bereit" | |
| 263 | Result 4 = "Einrichtbetrieb" No newline at end of file |
|
284 | Result 4 = "Einrichtbetrieb" | |
| 264 | Result 5 = "Bereit" No newline at end of file |
|
285 | Result 5 = "Bereit" | |
| 265 | Result 6 = "Pr�fung l�uft" No newline at end of file |
|
286 | Result 6 = "Pr�fung l�uft" | |
| 266 | Result 7 = "Pr�fung fertig" No newline at end of file |
|
287 | Result 7 = "Pr�fung fertig" | |
| 267 | Result 8 = "Fehler" No newline at end of file |
|
288 | Result 8 = "Fehler" | |
| 268 | Result 9 = "Pr�fung Stop" No newline at end of file |
|
289 | Result 9 = "Pr�fung Stop" | |
| 269 | Result 10 = "Pr�fung Stop" No newline at end of file |
|
290 | Result 10 = "Pr�fung Stop" | |
| 270 | Result 11 = "Pr�fung Stop" No newline at end of file |
|
291 | Result 11 = "Pr�fung Stop" | |
| 271 | Result 12 = "Pr�fung Stop" No newline at end of file |
|
292 | Result 12 = "Pr�fung Stop" | |
| 272 | Result 13 = "Pr�fung Stop" No newline at end of file |
|
293 | Result 13 = "Pr�fung Stop" | |
| 273 | Result 14 = "Pr�fung Stop" No newline at end of file |
|
294 | Result 14 = "Pr�fung Stop" | |
| 274 | Result 15 = "Pr�fung Stop" No newline at end of file |
|
295 | Result 15 = "Pr�fung Stop" | |
| 275 | Result 16 = "Bereit" No newline at end of file |
|
296 | Result 16 = "Bereit" | |
| 276 | Result 17 = "Bereit" No newline at end of file |
|
297 | Result 17 = "Bereit" | |
| 277 | Result 18 = "Bereit" No newline at end of file |
|
298 | Result 18 = "Bereit" | |
| 278 | Result 19 = "Bereit" No newline at end of file |
|
299 | Result 19 = "Bereit" | |
| 279 | Result 20 = "Bereit" No newline at end of file |
|
300 | Result 20 = "Bereit" | |
| 280 | Result 21 = "Bereit" No newline at end of file |
|
301 | Result 21 = "Bereit" | |
| 281 | No newline at end of file |
|
302 | ||
| 282 | [DialogMessages] No newline at end of file |
|
303 | [DialogMessages] | |
| 283 | Messages.<size(s)> = "7" No newline at end of file |
|
304 | Messages.<size(s)> = "7" | |
| 284 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" No newline at end of file |
|
305 | Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen" | |
| 285 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
306 | Messages 1 = "Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 286 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" No newline at end of file |
|
307 | Messages 2 = "Geben Sie die f�r die Testberichterstellung erforderlichen Daten ein. Bitte achten Sie darauf, dass die hellblau markierten Felder in der gew�hlten Sprache sind" | |
| 287 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" No newline at end of file |
|
308 | Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen" | |
| 288 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" No newline at end of file |
|
309 | Messages 4 = "W�hlen Sie eine Testkonfigurationsdatei zum Laden aus" | |
| 289 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" No newline at end of file |
|
310 | Messages 5 = "W�hlen Sie einen Ordner aus, der die Testergebnisse zum Laden enth�lt" | |
| 290 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" No newline at end of file |
|
311 | Messages 6 = "W�hlen Sie einen ID-Ordner aus, der alle Testergebnisse zum Laden enth�lt" | |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file |
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: modified file |
|
NO CONTENT: modified file | ||
| The requested commit or file is too big and content was truncated. Show full diff | |||||
| 1 | NO CONTENT: file was removed |
|
NO CONTENT: file was removed |
| 1 | NO CONTENT: file was removed |
|
NO CONTENT: file was removed |
General Comments 0
You need to be logged in to leave comments.
Login now