Projects/CurrentTester Commit

- SMP3 configuration in setup mode ready (not tested)

LabVIEW -

r2:3

parent child

Expand all files

The requested changes are too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_PowerSupply.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Configuration_AI_Resistance.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Configuration_AI_Thermocouple.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Configuration_AI_Type.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Configuration_AI_Voltage.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Configuration_AI_Resistance.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Configuration_AI_Thermocouple.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Configuration_AI_Type.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Configuration_AI_Voltage.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_PowerSupply.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Resistance.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Temperatures.vi created 10644 0 0

NO CONTENT: new file 10644

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Setup_Config_Voltages.vi created 10644 0 0

NO CONTENT: new file 10644

builds/data/Initialization_HSMP1.ini created 10644 0 0

	1	NO CONTENT: new file 10644			NO CONTENT: new file 10644
The requested commit or file is too big and content was truncated. Show full diff

builds/data/lib_NI_USB6252.lvlibp created 10644 0 0

	1	NO CONTENT: new file 10644			NO CONTENT: new file 10644
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/CurrentTester.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/Initialization.ini +117 -13

             [Tester]
             TesterType = "SMP3"
             TesterName = "Strommessplatz 3"
             MaxCurrent = 130
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
-            SensorsEnable 4 = "False"
+            SensorsEnable 4 = "True"
-            SensorsEnable 5 = "False"
+            SensorsEnable 5 = "True"
-            SensorsEnable 6 = "False"
+            SensorsEnable 6 = "True"
-            SensorsEnable 7 = "False"
+            SensorsEnable 7 = "True"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "NI-9210: Ch1"
             SensorsDescription 1 = "NI-9210: Ch2"
             SensorsDescription 2 = "NI-9210: Ch3"
             SensorsDescription 3 = "NI-9210: Ch4"
             SensorsDescription 4 = "NI-9219: Ch1"
             SensorsDescription 5 = "NI-9219: Ch2"
             SensorsDescription 6 = "NI-9219: Ch3"
             SensorsDescription 7 = "NI-9219: Ch4"
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
-            VoltageDescription.<size(s)> = "4"
+            VoltageDescription.<size(s)> = "4 2"
-            VoltageDescription 0 = "Pr�flingsspannung [V]"
+            VoltageDescription 0 = "NI PXI-6281: Ch4"
-            VoltageDescription 1 = "Shunt- Spannung [V]"
+            VoltageDescription 1 = "Pr�flingsspannung [V]"
-            VoltageDescription 2 = "Strom [A]"
+            VoltageDescription 2 = "NI PXI-6281: Ch5"
-            VoltageDescription 3 = "Widerstand [mOhm]"
+            VoltageDescription 3 = "Shunt- Spannung [V]"
+            VoltageDescription 4 = ""
+            VoltageDescription 5 = "Strom [A]"
+            VoltageDescription 6 = ""
+            VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "PXI1Slot5/port0/line5"
             DI_Setup = "PXI1Slot5/port0/line4"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "12"
-            Measurement_Channels 0 = "PXI1Slot5/ai3"
+            Measurement_Channels 0 = "PXI1Slot5/ai4"
-            Measurement_Channels 1 = "PXI1Slot5/ai4"
+            Measurement_Channels 1 = "PXI1Slot5/ai5"
             Measurement_Channels 2 = "NI9210/ai0"
             Measurement_Channels 3 = "NI9210/ai1"
             Measurement_Channels 4 = "NI9210/ai2"
             Measurement_Channels 5 = "NI9210/ai3"
             Measurement_Channels 6 = "NI9219/ai0"
             Measurement_Channels 7 = "NI9219/ai1"
             Measurement_Channels 8 = "NI9219/ai2"
             Measurement_Channels 9 = "NI9219/ai3"
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             ShuntResistance = 0,001
             Measurement_Check = False
             DMM_VISAName = "PXI1Slot3"
-            DMM_ContactLimits = "<size(s)=2> 0,0 1,5"
+            DMM_ContactLimits = "<size(s)=2> 0,000000 1,500000"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
-            TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
+            TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
+            PowerSupply_OutputVoltage = "3,000000"
+            PowerSupply_OverVoltageProtection = "6,000000"
+            DMM_Function = "2-wire Resistance"
+            DMM_AutoRange = "FALSE"
+            DMM_Range = "0,020000"
+            DMM_Resolution = "0,010000"
+            Configuration_AI_Voltage.<size(s)> = "2"
+            Configuration_AI_Voltage 0.Maximum = "5,000000"
+            Configuration_AI_Voltage 0.Minimum = "-5,000000"
+            Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Voltage 1.Maximum = "1,000000"
+            Configuration_AI_Voltage 1.Minimum = "-1,000000"
+            Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Thermocouple.<size(s)> = "10"
+            Configuration_AI_Thermocouple 0.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 0.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 0.Type = "K"
+            Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 0.Unit = "Deg C"
+            Configuration_AI_Thermocouple 1.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 1.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 1.Type = "K"
+            Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 1.Unit = "Deg C"
+            Configuration_AI_Thermocouple 2.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 2.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 2.Type = "K"
+            Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 2.Unit = "Deg C"
+            Configuration_AI_Thermocouple 3.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 3.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 3.Type = "K"
+            Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
+            Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
+            Configuration_AI_Thermocouple 3.Unit = "Deg C"
+            Configuration_AI_Thermocouple 4.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 4.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 4.Type = "K"
+            Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 4.Unit = "Deg C"
+            Configuration_AI_Thermocouple 5.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 5.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 5.Type = "K"
+            Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 5.Unit = "Deg C"
+            Configuration_AI_Thermocouple 6.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 6.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 6.Type = "K"
+            Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 6.Unit = "Deg C"
+            Configuration_AI_Thermocouple 7.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 7.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 7.Type = "K"
+            Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 7.Unit = "Deg C"
+            Configuration_AI_Thermocouple 8.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 8.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 8.Type = "K"
+            Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 8.Unit = "Deg C"
+            Configuration_AI_Thermocouple 9.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 9.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 9.Type = "K"
+            Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 9.Unit = "Deg C"
+            Configuration_AI_NI9219_Resistance.<size(s)> = "4"
+            Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Type.<size(s)> = "4"
+            Configuration_AI_NI9219_Type 0 = "Thermocouple"
+            Configuration_AI_NI9219_Type 1 = "Thermocouple"
+            Configuration_AI_NI9219_Type 2 = "Thermocouple"
+            Configuration_AI_NI9219_Type 3 = "Thermocouple"
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             DMM_Baudrate = "9600"
             NI_USB6252_Out_LiftTable = "Dev1/port0/line5"
             NI_USB6252_Out_SettingMode.<size(s)> = "2"
             NI_USB6252_Out_SettingMode 0 = "Dev1/port0/line0"
             NI_USB6252_Out_SettingMode 1 = "Dev1/port0/line1"
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "80"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
             [StateMessages]
             Info.<size(s)> = "17"
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Result.<size(s)> = "17"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             [DialogMessages]
             Messages.<size(s)> = "2"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"

CurrentTester [LabVIEW]/Initialization_HSMP1.ini +109 -5

             [Tester]
             TesterType = "HSMP1"
             TesterName = "Hochstrommessplatz 1"
             MaxCurrent = 600
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "True"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "Keithley: Ch6"
             SensorsDescription 1 = "Keithley: Ch7"
             SensorsDescription 2 = "Keithley: Ch8"
             SensorsDescription 3 = "Keithley: Ch9"
             SensorsDescription 4 = "Keithley: Ch10"
             SensorsDescription 5 = ""
             SensorsDescription 6 = ""
             SensorsDescription 7 = ""
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
-            VoltageDescription.<size(s)> = "4"
+            VoltageDescription.<size(s)> = "4 2"
-            VoltageDescription 0 = "Pr�flingsspannung [V]"
+            VoltageDescription 0 = "Keithley: Ch2"
-            VoltageDescription 1 = "Shunt- Spannung [V]"
+            VoltageDescription 1 = "Pr�flingsspannung [V]"
-            VoltageDescription 2 = "Strom [A]"
+            VoltageDescription 2 = "Keithley: Ch4"
-            VoltageDescription 3 = "Widerstand [mOhm]"
+            VoltageDescription 3 = "Shunt- Spannung [V]"
+            VoltageDescription 4 = ""
+            VoltageDescription 5 = "Strom [A]"
+            VoltageDescription 6 = ""
+            VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "Dev1/port1/line0"
             DI_Setup = ""
             PowerSupply_MinCurrent = "1"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "12"
             Measurement_Channels 0 = "102"
             Measurement_Channels 1 = "104"
             Measurement_Channels 2 = "106"
             Measurement_Channels 3 = "107"
             Measurement_Channels 4 = "108"
             Measurement_Channels 5 = "109"
             Measurement_Channels 6 = "110"
             Measurement_Channels 7 = ""
             Measurement_Channels 8 = ""
             Measurement_Channels 9 = ""
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             ShuntResistance = 0,00006
             Measurement_Check = False
             DMM_VISAName = "COM1"
             DMM_ContactLimits = "<size(s)=2> 0,0 50,0"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
+            PowerSupply_OutputVoltage = 3,000000
+            PowerSupply_OverVoltageProtection = 6,000000
+            DMM_Function = "2-wire Resistance"
+            DMM_AutoRange = False
+            DMM_Range = "0,020000"
+            DMM_Resolution = "0,001000"
+            Configuration_AI_Voltage.<size(s)> = "2"
+            Configuration_AI_Voltage 0.Maximum = "5,000000"
+            Configuration_AI_Voltage 0.Minimum = "-5,000000"
+            Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Voltage 1.Maximum = "1,000000"
+            Configuration_AI_Voltage 1.Minimum = "-1,000000"
+            Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Thermocouple.<size(s)> = "10"
+            Configuration_AI_Thermocouple 0.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 0.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 0.Type = "K"
+            Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 0.Unit = "Deg C"
+            Configuration_AI_Thermocouple 1.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 1.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 1.Type = "K"
+            Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 1.Unit = "Deg C"
+            Configuration_AI_Thermocouple 2.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 2.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 2.Type = "K"
+            Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 2.Unit = "Deg C"
+            Configuration_AI_Thermocouple 3.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 3.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 3.Type = "K"
+            Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
+            Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
+            Configuration_AI_Thermocouple 3.Unit = "Deg C"
+            Configuration_AI_Thermocouple 4.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 4.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 4.Type = "K"
+            Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 4.Unit = "Deg C"
+            Configuration_AI_Thermocouple 5.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 5.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 5.Type = "K"
+            Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 5.Unit = "Deg C"
+            Configuration_AI_Thermocouple 6.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 6.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 6.Type = "K"
+            Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 6.Unit = "Deg C"
+            Configuration_AI_Thermocouple 7.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 7.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 7.Type = "K"
+            Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 7.Unit = "Deg C"
+            Configuration_AI_Thermocouple 8.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 8.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 8.Type = "K"
+            Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 8.Unit = "Deg C"
+            Configuration_AI_Thermocouple 9.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 9.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 9.Type = "K"
+            Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 9.Unit = "Deg C"
+            Configuration_AI_NI9219_Resistance.<size(s)> = "4"
+            Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Type.<size(s)> = "4"
+            Configuration_AI_NI9219_Type 0 = "Thermocouple"
+            Configuration_AI_NI9219_Type 1 = "Thermocouple"
+            Configuration_AI_NI9219_Type 2 = "Thermocouple"
+            Configuration_AI_NI9219_Type 3 = "Thermocouple"
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             DMM_Baudrate = "9600"
             NI_USB6252_Out_LiftTable = "Dev1/port0/line5"
             NI_USB6252_Out_SettingMode.<size(s)> = "2"
             NI_USB6252_Out_SettingMode 0 = "Dev1/port0/line0"
             NI_USB6252_Out_SettingMode 1 = "Dev1/port0/line1"
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "250"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "True"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
             [StateMessages]
             Info.<size(s)> = "17"
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Result.<size(s)> = "17"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             [DialogMessages]
             Messages.<size(s)> = "2"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"

CurrentTester [LabVIEW]/Initialization_SMP3.ini +111 -7

             [Tester]
             TesterType = "SMP3"
             TesterName = "Strommessplatz 3"
             MaxCurrent = 130
             MaxTemperature = 250
             SensorsEnable.<size(s)> = "10"
             SensorsEnable 0 = "True"
             SensorsEnable 1 = "True"
             SensorsEnable 2 = "True"
             SensorsEnable 3 = "True"
             SensorsEnable 4 = "False"
             SensorsEnable 5 = "False"
             SensorsEnable 6 = "False"
             SensorsEnable 7 = "False"
             SensorsEnable 8 = "False"
             SensorsEnable 9 = "False"
             SensorsDescription.<size(s)> = "10"
             SensorsDescription 0 = "NI-9210: Ch1"
             SensorsDescription 1 = "NI-9210: Ch2"
             SensorsDescription 2 = "NI-9210: Ch3"
             SensorsDescription 3 = "NI-9210: Ch4"
             SensorsDescription 4 = "NI-9219: Ch1"
             SensorsDescription 5 = "NI-9219: Ch2"
             SensorsDescription 6 = "NI-9219: Ch3"
             SensorsDescription 7 = "NI-9219: Ch4"
             SensorsDescription 8 = ""
             SensorsDescription 9 = ""
-            VoltageDescription.<size(s)> = "4"
+            VoltageDescription.<size(s)> = "4 2"
-            VoltageDescription 0 = "Pr�flingsspannung [V]"
+            VoltageDescription 0 = "NI PXI-6281: Ch4"
-            VoltageDescription 1 = "Shunt- Spannung [V]"
+            VoltageDescription 1 = "Pr�flingsspannung [V]"
-            VoltageDescription 2 = "Strom [A]"
+            VoltageDescription 2 = "NI PXI-6281: Ch5"
-            VoltageDescription 3 = "Widerstand [mOhm]"
+            VoltageDescription 3 = "Shunt- Spannung [V]"
+            VoltageDescription 4 = ""
+            VoltageDescription 5 = "Strom [A]"
+            VoltageDescription 6 = ""
+            VoltageDescription 7 = "Widerstand [mOhm]"
             CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"
             [Hardware]
             SimulateDevices = True
             DI_E-Stop = "PXI1Slot5/port0/line5"
             DI_Setup = "PXI1Slot5/port0/line4"
             PowerSupply_MinCurrent = "0"
             PowerSupply_Check = False
             Measurement_Channels.<size(s)> = "12"
-            Measurement_Channels 0 = "PXI1Slot5/ai3"
+            Measurement_Channels 0 = "PXI1Slot5/ai4"
-            Measurement_Channels 1 = "PXI1Slot5/ai4"
+            Measurement_Channels 1 = "PXI1Slot5/ai5"
             Measurement_Channels 2 = "NI9210/ai0"
             Measurement_Channels 3 = "NI9210/ai1"
             Measurement_Channels 4 = "NI9210/ai2"
             Measurement_Channels 5 = "NI9210/ai3"
             Measurement_Channels 6 = "NI9219/ai0"
             Measurement_Channels 7 = "NI9219/ai1"
             Measurement_Channels 8 = "NI9219/ai2"
             Measurement_Channels 9 = "NI9219/ai3"
             Measurement_Channels 10 = ""
             Measurement_Channels 11 = ""
             ShuntResistance = 0,001
             Measurement_Check = False
             DMM_VISAName = "PXI1Slot3"
             DMM_ContactLimits = "<size(s)=2> 0,0 1,5"
             TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
             TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
             VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
             VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
             AllowedContactFails = "2"
             [SMP3]
             PowerSupply_VISAName = "COM4"
             PowerSupply_Address = "1"
             PowerSupply_Baudrate = "9600"
+            PowerSupply_OutputVoltage = 3,000000
+            PowerSupply_OverVoltageProtection = 6,000000
+            DMM_Function = "2-wire Resistance"
+            DMM_AutoRange = False
+            DMM_Range = "0,020000"
+            DMM_Resolution = "0,001000"
+            Configuration_AI_Voltage.<size(s)> = "2"
+            Configuration_AI_Voltage 0.Maximum = "5,000000"
+            Configuration_AI_Voltage 0.Minimum = "-5,000000"
+            Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Voltage 1.Maximum = "1,000000"
+            Configuration_AI_Voltage 1.Minimum = "-1,000000"
+            Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
+            Configuration_AI_Thermocouple.<size(s)> = "10"
+            Configuration_AI_Thermocouple 0.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 0.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 0.Type = "K"
+            Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 0.Unit = "Deg C"
+            Configuration_AI_Thermocouple 1.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 1.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 1.Type = "K"
+            Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 1.Unit = "Deg C"
+            Configuration_AI_Thermocouple 2.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 2.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 2.Type = "K"
+            Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 2.Unit = "Deg C"
+            Configuration_AI_Thermocouple 3.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 3.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 3.Type = "K"
+            Configuration_AI_Thermocouple 3.CJC_Source = "Constant Value"
+            Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
+            Configuration_AI_Thermocouple 3.Unit = "Deg C"
+            Configuration_AI_Thermocouple 4.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 4.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 4.Type = "K"
+            Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 4.Unit = "Deg C"
+            Configuration_AI_Thermocouple 5.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 5.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 5.Type = "K"
+            Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 5.Unit = "Deg C"
+            Configuration_AI_Thermocouple 6.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 6.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 6.Type = "K"
+            Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 6.Unit = "Deg C"
+            Configuration_AI_Thermocouple 7.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 7.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 7.Type = "K"
+            Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 7.Unit = "Deg C"
+            Configuration_AI_Thermocouple 8.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 8.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 8.Type = "K"
+            Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 8.Unit = "Deg C"
+            Configuration_AI_Thermocouple 9.Maximum = "250,000000"
+            Configuration_AI_Thermocouple 9.Minimum = "-250,000000"
+            Configuration_AI_Thermocouple 9.Type = "K"
+            Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
+            Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
+            Configuration_AI_Thermocouple 9.Unit = "Deg C"
+            Configuration_AI_NI9219_Resistance.<size(s)> = "4"
+            Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 1.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 2.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Resistance 3.Maximum = "10500,000000"
+            Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000"
+            Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
+            Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
+            Configuration_AI_NI9219_Type.<size(s)> = "4"
+            Configuration_AI_NI9219_Type 0 = "Thermocouple"
+            Configuration_AI_NI9219_Type 1 = "Thermocouple"
+            Configuration_AI_NI9219_Type 2 = "Thermocouple"
+            Configuration_AI_NI9219_Type 3 = "Thermocouple"
             [HSMP1]
             PowerSupply_VISAName = "COM2"
             PowerSupply_Address = "6"
             PowerSupply_Baudrate = "9600"
             DMM_Baudrate = "9600"
             NI_USB6252_Out_LiftTable = "Dev1/port0/line5"
             NI_USB6252_Out_SettingMode.<size(s)> = "2"
             NI_USB6252_Out_SettingMode 0 = "Dev1/port0/line0"
             NI_USB6252_Out_SettingMode 1 = "Dev1/port0/line1"
             [DefaultValues]
             WorkingStroke = "0"
             MaxTemperature = "80"
             MeasurementTime = "1"
             NominalCurrent = "0"
             TableControl = False
             SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
             Sensors+.<size(s)> = "10"
             Sensors+ 0 = "True"
             Sensors+ 1 = "True"
             Sensors+ 2 = "True"
             Sensors+ 3 = "True"
             Sensors+ 4 = "False"
             Sensors+ 5 = "False"
             Sensors+ 6 = "False"
             Sensors+ 7 = "False"
             Sensors+ 8 = "False"
             Sensors+ 9 = "False"
             SensorsFunction.<size(s)> = "10"
             SensorsFunction 0 = "Umgebungstemperatur"
             SensorsFunction 1 = "Pr�flingstemperatur"
             SensorsFunction 2 = "Temperatur 3"
             SensorsFunction 3 = "Temperatur 4"
             SensorsFunction 4 = "Temperatur 5"
             SensorsFunction 5 = "Temperatur 6"
             SensorsFunction 6 = "Temperatur 7"
             SensorsFunction 7 = "Temperatur 8"
             SensorsFunction 8 = "Temperatur 9"
             SensorsFunction 9 = "Temperatur 10"
             [Pathes]
             User = "C:\Work\CurrentTester\support\User.txt"
             ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
             CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"
             [Report]
             FileNameFormat = "%s_TestResults.txt"
             ReportNameFormat = "%s_TestReport.xlsx"
             ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
             ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"
             [StateMessages]
             Info.<size(s)> = "17"
             Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
             Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
             Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
             Info 3 = "Testdaten anlegen"
             Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
             Info 5 = "Test geladen"
             Info 6 = "Laufende Pr�fung..."
             Info 7 = "Pr�fung erfolgreich abgeschlossen"
             Info 8 = "Fehler aufgetreten!"
             Info 9 = "Test abgebrochen!"
             Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
             Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
             Info 12 = "Test abgebrochen! Messrate ist zu hoch"
             Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
             Info 14 = "Report wird erstellt... Bitte warten"
             Info 15 = "Report erstellt"
             Info 16 = "Der letzte Test ist geladen..."
             Result.<size(s)> = "17"
             Result 0 = "Not-Halt"
             Result 1 = ""
             Result 2 = "Bereit"
             Result 3 = "Bereit"
             Result 4 = "Einrichtbetrieb"
             Result 5 = "Bereit"
             Result 6 = "Pr�fung l�uft"
             Result 7 = "Pr�fung fertig"
             Result 8 = "Fehler"
             Result 9 = "Pr�fung Stop"
             Result 10 = "Pr�fung Stop"
             Result 11 = "Pr�fung Stop"
             Result 12 = "Pr�fung Stop"
             Result 13 = "Pr�fung Stop"
             Result 14 = "Bereit"
             Result 15 = "Bereit"
             Result 16 = "Bereit"
             [DialogMessages]
             Messages.<size(s)> = "2"
             Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
             Messages 1 = "W�hlen Sie eine Vorlage aus:"

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cSystem.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/cTester.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/CTLs/eOperationSystem.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Resistance.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Temperatures.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/OverrideVIs/Setup_Config_Voltages.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckE-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/CheckTestConfigChanged.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetChildClass.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/GetReportName.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Finish.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ICT_Start.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Init.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadChildClass.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadStandardValues.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/LoadTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/PerformMeasurements.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/ReadTestResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/SaveTestConfig.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/WriteToExcel.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvCorrectedComment.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvInfo.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/fgvSystem.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/DisplayResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Config.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

CurrentTester [LabVIEW]/class_HSMP1/OverrideVIs/Test_LoadOldResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/CTLs/cSMP3.ctl 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read E-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Measurement_Channels.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Measurement_Configuration.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read Setup.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read class_DMM_NI.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Read class_Lambda_ZUP.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write E-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Measurement_Channels.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Measurement_Configuration.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write Setup.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write class_DMM_NI.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/DataMemberAccess/Write class_Lambda_ZUP.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/DMM_Close.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/DMM_GetResistance.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/DMM_Init.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_Configuration.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PerformMeasurements_GetValues.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PowerSupply_Close.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PowerSupply_GetCurrent.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PowerSupply_Init.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PowerSupply_Reset.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/PowerSupply_SetCurrent.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/ReadE-Stop.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldINI.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/OverrideVIs/Test_LoadOldResults.vi 0 0

NO CONTENT: modified file

CurrentTester [LabVIEW]/class_SMP3/class_SMP3.lvclass 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/CurrentTester.exe 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

builds/data/Initialization_SMP3.ini 0 0

	1	NO CONTENT: modified file			NO CONTENT: modified file
The requested commit or file is too big and content was truncated. Show full diff

General Comments 0

Write
Preview

You need to be logged in to leave comments. Login now

No TODOs yet

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages