# SVN changeset patch # User LabVIEW # Date 2025-06-25 11:04:15.174875 # Revision 57 - Setup panel: shift from disabled sensors corrected - SW reaction of mmbient pointer for not corrected name for previous tests updated (red marked...) - Protocol creation is not possible if the current profiles are not identical =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/CurrentTester.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/CurrentTester.vi b/CurrentTester [LabVIEW]/CurrentTester.vi --- a/CurrentTester [LabVIEW]/CurrentTester.vi (revision 56) +++ b/CurrentTester [LabVIEW]/CurrentTester.vi (revision 57) Index: CurrentTester [LabVIEW]/Initialization.ini =================================================================== diff --git a/CurrentTester [LabVIEW]/Initialization.ini b/CurrentTester [LabVIEW]/Initialization.ini --- a/CurrentTester [LabVIEW]/Initialization.ini (revision 56) +++ b/CurrentTester [LabVIEW]/Initialization.ini (revision 57) @@ -1,7 +1,7 @@ [Tester] -TesterType = "HSMP2" -TesterName = "Hochstrommessplatz 2" -MaxCurrent = 1000 +TesterType = "HSMP1" +TesterName = "Hochstrommessplatz 1" +MaxCurrent = 600 MaxTemperature = 250 MaxAmbientTemperature = 50 TemperatureWarning- = 10 @@ -11,37 +11,37 @@ SensorsEnable 2 = "True" SensorsEnable 3 = "True" SensorsEnable 4 = "True" -SensorsEnable 5 = "True" -SensorsEnable 6 = "True" -SensorsEnable 7 = "True" -SensorsEnable 8 = "True" -SensorsEnable 9 = "True" +SensorsEnable 5 = "False" +SensorsEnable 6 = "False" +SensorsEnable 7 = "False" +SensorsEnable 8 = "False" +SensorsEnable 9 = "False" SensorsEnable 10 = "False" SensorsEnable 11 = "False" SensorsEnable 12 = "False" SensorsEnable 13 = "False" SensorsEnable 14 = "False" SensorsDescription. = "15" -SensorsDescription 0 = "NI-9212: Ch0" -SensorsDescription 1 = "NI-9212: Ch1" -SensorsDescription 2 = "NI-9212: Ch2" -SensorsDescription 3 = "NI-9212: Ch3" -SensorsDescription 4 = "NI-9212: Ch4" -SensorsDescription 5 = "NI-9212: Ch5" -SensorsDescription 6 = "NI-9212: Ch6" -SensorsDescription 7 = "NI-9212: Ch7" -SensorsDescription 8 = "NI-9219_1: Ch0" -SensorsDescription 9 = "NI-9219_1: Ch1" -SensorsDescription 10 = "NI-9219_1: Ch2" -SensorsDescription 11 = "NI-9219_2: Ch0" -SensorsDescription 12 = "NI-9219_2: Ch1" -SensorsDescription 13 = "NI-9219_2: Ch2" -SensorsDescription 14 = "NI-9219_2: Ch3" +SensorsDescription 0 = "Keithley: Ch6" +SensorsDescription 1 = "Keithley: Ch7" +SensorsDescription 2 = "Keithley: Ch8" +SensorsDescription 3 = "Keithley: Ch9" +SensorsDescription 4 = "Keithley: Ch10" +SensorsDescription 5 = "" +SensorsDescription 6 = "" +SensorsDescription 7 = "" +SensorsDescription 8 = "" +SensorsDescription 9 = "" +SensorsDescription 10 = "" +SensorsDescription 11 = "" +SensorsDescription 12 = "" +SensorsDescription 13 = "" +SensorsDescription 14 = "" VoltageDescription. = "5 2" -VoltageDescription 0 = "NI-9215: Ch0" +VoltageDescription 0 = "Keithley: Ch2" VoltageDescription 1 = "Pr�flingsspannung [V]" -VoltageDescription 2 = "NI-9219_1: Ch2" -VoltageDescription 3 = "Zero Flux- Spannung [V]" +VoltageDescription 2 = "Keithley: Ch4" +VoltageDescription 3 = "Shunt- Spannung [V]" VoltageDescription 4 = "" VoltageDescription 5 = "Strom [A]" VoltageDescription 6 = "" @@ -51,235 +51,91 @@ CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc" [Hardware] -SimulateDevices = False -DI_E-Stop = "" +SimulateDevices = True +DI_E-Stop = "Dev1/port1/line0" DI_Setup = "" -PowerSupply_VISAName = "TCPIP0::10.1.2.40::30000::SOCKET" -PowerSupply_Address = "0" -PowerSupply_Baudrate = "0" -PowerSupply_OutputVoltage = "10,000000" -PowerSupply_OverVoltageProtection = "9,800000" -PowerSupply_MinCurrent = "0" +PowerSupply_VISAName = "COM2" +PowerSupply_Address = "6" +PowerSupply_Baudrate = "9600" +PowerSupply_OutputVoltage = "8,000000" +PowerSupply_OverVoltageProtection = "9,000000" +PowerSupply_MinCurrent = "1" PowerSupply_Check = False -PowerSupply_WarningPower = "9000,000000" -PowerSupply_AbortPower = "10000,000000" -PowerSupply_PID = "FALSE" -PowerSupply_PID_Time = "1,000000" +PowerSupply_WarningPower = "1500,000000" +PowerSupply_AbortPower = "2000,000000" +PowerSupply_PID = "False" +PowerSupply_PID_Time = "0,100000" PowerSupply_PID_ProportionalGain = "0,100000" PowerSupply_PID_IntegralTime = "0,180000" PowerSupply_PID_DerivativeTime = "0,000000" -AbortCurrentDifference = "0,000000" +AbortCurrentDifference = "0" Measurement_Channels. = "17" -Measurement_Channels 0 = "NI9215/ai0" -Measurement_Channels 1 = "NI9219_1/ai2" -Measurement_Channels 2 = "NI9212/ai0" -Measurement_Channels 3 = "NI9212/ai1" -Measurement_Channels 4 = "NI9212/ai2" -Measurement_Channels 5 = "NI9212/ai3" -Measurement_Channels 6 = "NI9212/ai4" -Measurement_Channels 7 = "NI9212/ai5" -Measurement_Channels 8 = "NI9212/ai6" -Measurement_Channels 9 = "NI9212/ai7" -Measurement_Channels 10 = "NI9219_1/ai0" -Measurement_Channels 11 = "NI9219_1/ai1" -Measurement_Channels 12 = "NI9219_1/ai2" -Measurement_Channels 13 = "NI9219_2/ai0" -Measurement_Channels 14 = "NI9219_2/ai1" -Measurement_Channels 15 = "NI9219_2/ai2" -Measurement_Channels 16 = "NI9219_2/ai3" -Measurement_Sample = " 40,000000 40,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 2,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000 40,000000" -ShuntResistance = "0,005" +Measurement_Channels 0 = "112" +Measurement_Channels 1 = "102" +Measurement_Channels 2 = "104" +Measurement_Channels 3 = "106" +Measurement_Channels 4 = "107" +Measurement_Channels 5 = "108" +Measurement_Channels 6 = "109" +Measurement_Channels 7 = "110" +Measurement_Channels 8 = "" +Measurement_Channels 9 = "" +Measurement_Channels 10 = "" +Measurement_Channels 11 = "" +Measurement_Channels 12 = "" +Measurement_Channels 13 = "" +Measurement_Channels 14 = "" +Measurement_Channels 15 = "" +Measurement_Channels 16 = "" +Measurement_Sample = " 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" +ShuntResistance = 0,00006 Measurement_Check = False Measurement_Delay = "1" -DMM_VISAName = "NI9219_1/ai3" -DMM_ContactLimits = " 0,000000 10,000000" +DMM_VISAName = "COM1" +DMM_ContactLimits = " 0,0 10,0" TemperatureGain = " 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" TemperatureOffset = " 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000" -VoltageGain = " 1,000000 -1,000000 1,000000 1,000000 1,000000" +VoltageGain = " 1,000000 1,000000 1,000000 1,000000 1,000000" VoltageOffset = " 0,000000 0,000000 0,000000 0,000000 0,000000" AllowedContactFails = "2" -[HSMP2] -DMM_Configuration.Maximum = "10500,000000" -DMM_Configuration.Minimum = "0,000000" -DMM_Configuration.Configuration = "4-Wire" -DMM_Configuration.CurrentExcitationSource = "Internal" -DMM_Configuration.CurrentExcitationValue = "0,000500" -DMM_Sample = "40,000000" -Configuration_AI_Voltage. = "2" -Configuration_AI_Voltage 0.Maximum = "10,000000" -Configuration_AI_Voltage 0.Minimum = "-10,000000" -Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential" -Configuration_AI_Voltage 1.Maximum = "10,000000" -Configuration_AI_Voltage 1.Minimum = "0,000000" -Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential" -Configuration_AI_Thermocouple. = "15" -Configuration_AI_Thermocouple 0.Maximum = "250,000000" -Configuration_AI_Thermocouple 0.Minimum = "0,000000" -Configuration_AI_Thermocouple 0.Type = "K" -Configuration_AI_Thermocouple 0.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 0.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 1.Maximum = "250,000000" -Configuration_AI_Thermocouple 1.Minimum = "0,000000" -Configuration_AI_Thermocouple 1.Type = "K" -Configuration_AI_Thermocouple 1.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 1.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 2.Maximum = "250,000000" -Configuration_AI_Thermocouple 2.Minimum = "0,000000" -Configuration_AI_Thermocouple 2.Type = "K" -Configuration_AI_Thermocouple 2.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 2.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 3.Maximum = "250,000000" -Configuration_AI_Thermocouple 3.Minimum = "0,000000" -Configuration_AI_Thermocouple 3.Type = "K" -Configuration_AI_Thermocouple 3.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 3.CJC_Value = "10,000000" -Configuration_AI_Thermocouple 4.Maximum = "250,000000" -Configuration_AI_Thermocouple 4.Minimum = "0,000000" -Configuration_AI_Thermocouple 4.Type = "K" -Configuration_AI_Thermocouple 4.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 4.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 5.Maximum = "250,000000" -Configuration_AI_Thermocouple 5.Minimum = "0,000000" -Configuration_AI_Thermocouple 5.Type = "K" -Configuration_AI_Thermocouple 5.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 5.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 6.Maximum = "250,000000" -Configuration_AI_Thermocouple 6.Minimum = "0,000000" -Configuration_AI_Thermocouple 6.Type = "K" -Configuration_AI_Thermocouple 6.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 6.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 7.Maximum = "250,000000" -Configuration_AI_Thermocouple 7.Minimum = "0,000000" -Configuration_AI_Thermocouple 7.Type = "K" -Configuration_AI_Thermocouple 7.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 7.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 8.Maximum = "250,000000" -Configuration_AI_Thermocouple 8.Minimum = "0,000000" -Configuration_AI_Thermocouple 8.Type = "K" -Configuration_AI_Thermocouple 8.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 8.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 9.Maximum = "250,000000" -Configuration_AI_Thermocouple 9.Minimum = "0,000000" -Configuration_AI_Thermocouple 9.Type = "K" -Configuration_AI_Thermocouple 9.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 9.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 10.Maximum = "250,000000" -Configuration_AI_Thermocouple 10.Minimum = "0,000000" -Configuration_AI_Thermocouple 10.Type = "K" -Configuration_AI_Thermocouple 10.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 10.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 11.Maximum = "250,000000" -Configuration_AI_Thermocouple 11.Minimum = "-200,000000" -Configuration_AI_Thermocouple 11.Type = "K" -Configuration_AI_Thermocouple 11.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 11.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 12.Maximum = "250,000000" -Configuration_AI_Thermocouple 12.Minimum = "-200,000000" -Configuration_AI_Thermocouple 12.Type = "K" -Configuration_AI_Thermocouple 12.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 12.CJC_Value = "25,000000" -Configuration_AI_Thermocouple 13.Maximum = "250,000000" -Configuration_AI_Thermocouple 13.Minimum = "-200,000000" -Configuration_AI_Thermocouple 13.Type = "K" -Configuration_AI_Thermocouple 13.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 13.CJC_Value = "10,000000" -Configuration_AI_Thermocouple 14.Maximum = "250,000000" -Configuration_AI_Thermocouple 14.Minimum = "-200,000000" -Configuration_AI_Thermocouple 14.Type = "K" -Configuration_AI_Thermocouple 14.CJC_Source = "Built-In" -Configuration_AI_Thermocouple 14.CJC_Value = "25,000000" -Configuration_AI_NI9219_Resistance. = "7" -Configuration_AI_NI9219_Resistance 0.Maximum = "800,000000" -Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 0.Configuration = "4-Wire" -Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 0.ABC = " 1,224E-3 2,31E-4 3,938074E-9" -Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000" -Configuration_AI_NI9219_Resistance 1.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 1.ABC = " 1,224E-3 2,31E-4 3,938074E-9" -Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000" -Configuration_AI_NI9219_Resistance 2.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 2.ABC = " 3,81E-3 -6,02E-7 -6E-12" -Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000" -Configuration_AI_NI9219_Resistance 3.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 3.ABC = " 1,224312924E-3 2,308955523E-4 3,938074268E-9" -Configuration_AI_NI9219_Resistance 4.Maximum = "10500,000000" -Configuration_AI_NI9219_Resistance 4.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 4.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 4.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 4.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 4.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 4.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 4.ABC = " 0,001224 0,000231 3,938074E-9" -Configuration_AI_NI9219_Resistance 5.Maximum = "250,000000" -Configuration_AI_NI9219_Resistance 5.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 5.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 5.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 5.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 5.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 5.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 5.ABC = " 0,001224 0,000231 3,938074E-9" -Configuration_AI_NI9219_Resistance 6.Maximum = "250,000000" -Configuration_AI_NI9219_Resistance 6.Minimum = "0,000000" -Configuration_AI_NI9219_Resistance 6.Configuration = "2-Wire" -Configuration_AI_NI9219_Resistance 6.CurrentExcitationSource = "Internal" -Configuration_AI_NI9219_Resistance 6.CurrentExcitationValue = "0,000500" -Configuration_AI_NI9219_Resistance 6.RTD_Type = "Pt3750" -Configuration_AI_NI9219_Resistance 6.R0 = "1000,000000" -Configuration_AI_NI9219_Resistance 6.ABC = " 0,003810 -6,020000E-7 -6,000000E-12" -Configuration_AI_NI9219_Type. = "7" -Configuration_AI_NI9219_Type 0 = "RTD" -Configuration_AI_NI9219_Type 1 = "Resistance_Thermistor" -Configuration_AI_NI9219_Type 2 = "Thermocouple" -Configuration_AI_NI9219_Type 3 = "Resistance_RTD" -Configuration_AI_NI9219_Type 4 = "Resistance_RTD" -Configuration_AI_NI9219_Type 5 = "Resistance_RTD" -Configuration_AI_NI9219_Type 6 = "Resistance_RTD" -POS_Config.IP = "10.1.2.1" -POS_Config.Port = "502" -POS_AxesNames. = "3" -POS_AxesNames 0 = "X" -POS_AxesNames 1 = "Y" -POS_AxesNames 2 = "Z" -POS_Reference_Axes = " 1,000000 1,000000 308,000000" -POS_Limits_Axis1 = " 0 155" -POS_Limits_Axis2 = " 0 303" -POS_Limits_Axis3 = " 0 309" -POS_AxesFlipped. = "3" -POS_AxesFlipped 0 = "True" -POS_AxesFlipped 1 = "True" -POS_AxesFlipped 2 = "False" -Pos_MaxVelocity = "300" -Pos_MaxAcceleration = "15000" -Pos_MaxJerk = "140000" -Pos_DO_E-Stop_Index = "0" -Pos_DO_Setup_Index = "2" -ForceLimit_Axis3 = " 0,000000" -ForceLimit_Axis3_Text. = "1" -ForceLimit_Axis3_Text 0 = "" -ForceLimit_Axis3_AO_Limits = " 0,000000 100,000000" -ForceLimit_AI_Index = "0" -AirCooling_AI_Index = "1" -AirCooling_AO_Index = "0" +[HSMP1] +DMM_Baudrate = "9600" +Measurement_Channels_AutoRange. = "13" +Measurement_Channels_AutoRange 0 = "FALSE" +Measurement_Channels_AutoRange 1 = "TRUE" +Measurement_Channels_AutoRange 2 = "TRUE" +Measurement_Channels_AutoRange 3 = "TRUE" +Measurement_Channels_AutoRange 4 = "TRUE" +Measurement_Channels_AutoRange 5 = "TRUE" +Measurement_Channels_AutoRange 6 = "TRUE" +Measurement_Channels_AutoRange 7 = "TRUE" +Measurement_Channels_AutoRange 8 = "TRUE" +Measurement_Channels_AutoRange 9 = "TRUE" +Measurement_Channels_AutoRange 10 = "TRUE" +Measurement_Channels_AutoRange 11 = "TRUE" +Measurement_Channels_AutoRange 12 = "TRUE" +Measurement_Channels_Range = " 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000" +Measurement_Channels_Resolution. = "13" +Measurement_Channels_Resolution 0 = "6.5" +Measurement_Channels_Resolution 1 = "6.5" +Measurement_Channels_Resolution 2 = "6.5" +Measurement_Channels_Resolution 3 = "6.5" +Measurement_Channels_Resolution 4 = "6.5" +Measurement_Channels_Resolution 5 = "6.5" +Measurement_Channels_Resolution 6 = "6.5" +Measurement_Channels_Resolution 7 = "6.5" +Measurement_Channels_Resolution 8 = "6.5" +Measurement_Channels_Resolution 9 = "6.5" +Measurement_Channels_Resolution 10 = "6.5" +Measurement_Channels_Resolution 11 = "6.5" +Measurement_Channels_Resolution 12 = "6.5" +Resistance_Function = "Resistance" +Resistance_OffsetCompensation = "FALSE" +TableControl_Out_LiftTable = "Dev1/port0/line5" +TableControl_Out_SettingMode. = "2" +TableControl_Out_SettingMode 0 = "Dev1/port0/line0" +TableControl_Out_SettingMode 1 = "Dev1/port0/line1" [DefaultValues] WorkingStroke = "0" @@ -292,7 +148,7 @@ Sensors+ 0 = "True" Sensors+ 1 = "True" Sensors+ 2 = "True" -Sensors+ 3 = "False" +Sensors+ 3 = "True" Sensors+ 4 = "False" Sensors+ 5 = "False" Sensors+ 6 = "False" @@ -330,8 +186,8 @@ [Pathes] User = "C:\Work\CurrentTester\support\User.txt" -ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2" -ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP2\Protocols" +ReportsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1" +ProtocolsFolder = "C:\Work\CurrentTester\support\ResultData_HSMP1\Protocols" CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles" Applicants = "C:\Work\CurrentTester\support\Applicants.txt" @@ -350,12 +206,12 @@ ProtocolDataFolderName = "Bilder|Messungen" [StateMessages] -Info. = "29" +Info. = "23" Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich" Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken" Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen" Info 3 = "Testdaten anlegen" -Info 4 = "Der Schl�sselschalter muss in die Position "Automatik" gebracht werden und die automatische Achsensteuerung soll aktiviert werden um den Test starten zu k�nnen oder den Strom manuell einzustellen!" +Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!" Info 5 = "Test geladen" Info 6 = "Laufende Pr�fung..." Info 7 = "Pr�fung erfolgreich abgeschlossen" @@ -374,13 +230,7 @@ Info 20 = "Testbericht wird erstellt... Bitte warten" Info 21 = "Testbericht erstellt" Info 22 = "Test ist gespeichert" -Info 23 = "Achsen werden initialisiert..." -Info 24 = "Referenzfahrt l�uft..." -Info 25 = "X-Achse wird referenziert..." -Info 26 = "Y-Achse wird referenziert..." -Info 27 = "Z-Achse wird referenziert..." -Info 28 = "Position wird angefahren..." -Result. = "29" +Result. = "23" Result 0 = "Not-Halt" Result 1 = "" Result 2 = "Bereit" @@ -404,12 +254,6 @@ Result 20 = "Bereit" Result 21 = "Bereit" Result 22 = "Bereit" -Result 23 = "" -Result 24 = "Einrichtbetrieb" -Result 25 = "Einrichtbetrieb" -Result 26 = "Einrichtbetrieb" -Result 27 = "Einrichtbetrieb" -Result 28 = "Einrichtbetrieb" [DialogMessages] Messages. = "8" Index: CurrentTester [LabVIEW]/Initialization_HSMP1.ini =================================================================== diff --git a/CurrentTester [LabVIEW]/Initialization_HSMP1.ini b/CurrentTester [LabVIEW]/Initialization_HSMP1.ini --- a/CurrentTester [LabVIEW]/Initialization_HSMP1.ini (revision 56) +++ b/CurrentTester [LabVIEW]/Initialization_HSMP1.ini (revision 57) @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "9,000000" PowerSupply_MinCurrent = "1" PowerSupply_Check = False -PowerSupply_WarningPower = "4700,000000" -PowerSupply_AbortPower = "4750,000000" +PowerSupply_WarningPower = "1500,000000" +PowerSupply_AbortPower = "2000,000000" PowerSupply_PID = "False" PowerSupply_PID_Time = "0,100000" PowerSupply_PID_ProportionalGain = "0,100000" Index: CurrentTester [LabVIEW]/Initialization_HSMP2.ini =================================================================== diff --git a/CurrentTester [LabVIEW]/Initialization_HSMP2.ini b/CurrentTester [LabVIEW]/Initialization_HSMP2.ini --- a/CurrentTester [LabVIEW]/Initialization_HSMP2.ini (revision 56) +++ b/CurrentTester [LabVIEW]/Initialization_HSMP2.ini (revision 57) @@ -1,7 +1,7 @@ [Tester] TesterType = "HSMP2" TesterName = "Hochstrommessplatz 2" -MaxCurrent = 1000 +MaxCurrent = 2000 MaxTemperature = 250 MaxAmbientTemperature = 50 TemperatureWarning- = 10 @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "9,800000" PowerSupply_MinCurrent = "0" PowerSupply_Check = False -PowerSupply_WarningPower = "9000,000000" -PowerSupply_AbortPower = "10000,000000" +PowerSupply_WarningPower = "4000,000000" +PowerSupply_AbortPower = "5000,000000" PowerSupply_PID = "FALSE" PowerSupply_PID_Time = "1,000000" PowerSupply_PID_ProportionalGain = "0,100000" Index: CurrentTester [LabVIEW]/Initialization_SMP3.ini =================================================================== diff --git a/CurrentTester [LabVIEW]/Initialization_SMP3.ini b/CurrentTester [LabVIEW]/Initialization_SMP3.ini --- a/CurrentTester [LabVIEW]/Initialization_SMP3.ini (revision 56) +++ b/CurrentTester [LabVIEW]/Initialization_SMP3.ini (revision 57) @@ -22,14 +22,14 @@ SensorsEnable 13 = "False" SensorsEnable 14 = "False" SensorsDescription. = "15" -SensorsDescription 0 = "NI-9210: Ch1" -SensorsDescription 1 = "NI-9210: Ch2" -SensorsDescription 2 = "NI-9210: Ch3" -SensorsDescription 3 = "NI-9210: Ch4" -SensorsDescription 4 = "NI-9219: Ch1" -SensorsDescription 5 = "NI-9219: Ch2" -SensorsDescription 6 = "NI-9219: Ch3" -SensorsDescription 7 = "NI-9219: Ch4" +SensorsDescription 0 = "NI-9210: Ch0" +SensorsDescription 1 = "NI-9210: Ch1" +SensorsDescription 2 = "NI-9210: Ch2" +SensorsDescription 3 = "NI-9210: Ch3" +SensorsDescription 4 = "NI-9219: Ch0" +SensorsDescription 5 = "NI-9219: Ch1" +SensorsDescription 6 = "NI-9219: Ch2" +SensorsDescription 7 = "NI-9219: Ch3" SensorsDescription 8 = "" SensorsDescription 9 = "" SensorsDescription 10 = "" @@ -38,9 +38,9 @@ SensorsDescription 13 = "" SensorsDescription 14 = "" VoltageDescription. = "5 2" -VoltageDescription 0 = "NI PXI-6281: Ch4" +VoltageDescription 0 = "NI PXI-6281: Ch3" VoltageDescription 1 = "Pr�flingsspannung [V]" -VoltageDescription 2 = "NI PXI-6281: Ch5" +VoltageDescription 2 = "NI PXI-6281: Ch4" VoltageDescription 3 = "Shunt- Spannung [V]" VoltageDescription 4 = "" VoltageDescription 5 = "Strom [A]" @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "6,000000" PowerSupply_MinCurrent = "0" PowerSupply_Check = False -PowerSupply_WarningPower = "780,000000" -PowerSupply_AbortPower = "790,000000" +PowerSupply_WarningPower = "200,000000" +PowerSupply_AbortPower = "250,000000" PowerSupply_PID = "False" PowerSupply_PID_Time = "0,100000" PowerSupply_PID_ProportionalGain = "0,100000" =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/DialogReport.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_ButtonsControl.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi new file mode 10644 --- /dev/null (revision 0) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_CheckData.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/SubVIs/Protocol_DisplayLoadedTests.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/CreateProtocol.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_BasicData.vi (revision 57) =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi --- a/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/Subpanels/Setup_Machine.vi (revision 57) Index: CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass =================================================================== diff --git a/CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass b/CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass --- a/CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass (revision 56) +++ b/CurrentTester [LabVIEW]/class_CurrentTester/class_CurrentTester.lvclass (revision 57) @@ -1307,6 +1307,15 @@ 1 1350574608 + + )1#!!!!!!!)!"1!&!!!-!%!!!@````]!!!!"!!%!!!3G!!!!+1!-1#%'=X2B>(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&!!!Q!!!!%!!AFF=H*P=C"P>81!#%!B!U^,0Q!%!!!!)%"1!!-!!!!"!!)4:8*S<X)A;7YA+'ZP)'6S=G^S+1!)!$$`````!#"!1!!"`````Q!(%F2F<8"F=G&U>8*F5W6O=W^S=Q!!+%"!!!(`````!!=<6'6N='6S982V=G64:7ZT<X*T8V.F<'6D>'6E!"*!1!!"`````Q!("5FU:7VT!"J!1!!#``````````]!"QF*>'6N=U2B>'%!&E"!!!(`````!!=)382F<8.597=!!"N!!Q!54G6X)%FU:7UA37ZE:7ZU982J<WY!!"J!1!!"`````Q!.$%FU:7VT37ZE:7ZU=Q!!%%!Q`````Q:5:8.U351!!!Z!-0````]%68.F=A!!$E!Q`````Q2/97VF!!!11$$`````"U.P<7VF<H1!%%!Q`````Q:4>(*J<G=!!#"!1!!"`````Q!4%F2F<8"F=G&U>8*F5W6O=W^S=Q!!71$R!!!!!!!!!!)<9WRB=X.@1X6S=G6O>&2F=X2F=CZM>G.M98.T%G.5:8.U1G&T;7.%982B,G.U<!!C1&!!"1!0!"!!%1!3!"1.6'6T>%*B=WFD2'&U91!41!I!$6>P=GNJ<G>4>(*P;W5!$5!+!!>/>7VF=GFD!"R!1!!"`````Q!8$EVB?&2F<8"F=G&U>8*F!!!61!I!$UVF98.V=G6N:7ZU6'FN:1!61!I!$EZP<7FO97R$>8*S:7ZU!!!=1%!!!@````]!&QZ%>8*B>'FP<F:B<(6F=Q!!'E"!!!(`````!"=.1X6S=G6O>&:B<(6F=Q!31#%-6'&C<'6$<WZU=G^M!!!81!9!%%&J=E.P<WRJ<G>0=(2J<WY!!"R!1!!"`````Q!8$F"S:8.T>8*F6G&M>76T!!"J!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-79U.V=H*F<H25:8.U1W^O:GFH,G.U<!!O1&!!#1!7!"A!'1!;!"M!(!!>!"Y!(R&$>8*S:7ZU6'6T>%.P<G:J:Q!=1%!!!P``````````!"=,6'6T>&*F=X6M>(-!"1!+!!!+!&!!!A!C!#)!&%"!!!(`````!#-'4'FN;82T!!"<!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-59V"S<X2P9W^M5G6T>7RU=SZD>'Q!)E"1!!1!&1!A!#%!*!ZP>82Q>81A9WRV=X2F=A!!&%"!!!(`````!#5(5G6T>7RU=Q">!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-79V"S<X2P9W^M6'6T>(.%982B,G.U<!!C1&!!"Q!)!!E!#A!,!!Q!$A!G#62F=X2T2'&U91"5!0!!$!!$!!1!"1!&!!5!"1!&!!5!"A!&!!5!*Q)!!(A!!!U)!!!*!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#!!!!!!!!!!!!!!!%!!!!!!"!#A!!!!! + -1 + 0 + true + 1 + 1 + 1107821057 + )1#!!!!!!!)!"1!&!!!-!%!!!@````]!!!!"!!%!!!<3!!!!01!-1#%'=X2B>(6T!!!,1!-!"'.P:'5!!""!-0````]'=W^V=G.F!!!71&!!!Q!!!!%!!AFF=H*P=C"P>81!"!!!!"R!-P````]45(*P>'^D<WRT2G^M:'6S)%^V>!!A1$$`````&F"S<X2P9W^M2'&U95:P<'2F=EZB<75!!""!-0````]'5X2S;7ZH!!!,1!9!"6:B<(6F!!I!5!!#!!=!#!"*!0%!!!!!!!!!!3:-6F.U=GFO:X."<G2797RV:8."=H*B?62Z='6%:7:@64%W,G.U<!!;1%!!!@````]!#1F4:7RF9X2J<WY!)%"1!!-!!!!"!!)4:8*S<X)A;7YA+'ZP)'6S=G^S+1!31$$`````#%&T=W6N9GRZ!!!;1$$`````%6*F='^S>%:J<'6/97VF)%FO!"2!-0````]+1W^N<76O>#"*<A!!&%"!!!(`````!!=(5W6O=W^S=Q!=1%!!!@````]!"Q^4:7ZT<X*T4X*J:WFO97Q!%E!Q`````QF3:8&V:8.U:8)!%%!Q`````Q:5:8.U:8)!!!N!"Q!&4X*E:8)!$E!S`````Q21982I!!!71%!!!@````]!&!B1;7.U>8*F=Q!!'%!S`````Q^%:8.U;7ZB>'FP<F"B>'A!$E!B#%.P=(F%982B!!!51#%/6'^U97R4>'&U;8.U;7-!!!R!)1:(:8*N97Y!!(U!]1!!!!!!!!!#'W.M98.T8U.V=H*F<H25:8.U:8)O<(:D<'&T=RJD5(*P>'^D<WR$<WZG;7>V=G&U;7^O,G.U<!!_1&!!$A!-!!U!$A!0!"!!%1!3!"-!&1!5!"9!&Q!9!"E79V"S<X2P9W^M1W^O:GFH>8*B>'FP<A!!%E!S`````QB5:7VQ<'&U:1!!#!!Q`````Q!A1%!!!@````]!("*5:7VQ:8*B>(6S:6.F<H.P=H-!!#B!1!!"`````Q!='V2F<8"F=G&U>8*F5W6O=W^S=V^4:7RF9X2F:!!31%!!!@````]!(!6*>'6N=Q!;1%!!!P``````````!"Q*382F<8.%982B!":!1!!"`````Q!=#%FU:7VT6'&H!!!<1!-!&%ZF>S"*>'6N)%FO:'6O>'&U;7^O!!!;1%!!!@````]!)AR*>'6N=UFO:'6O>(-!!""!-0````]'6'6T>%F%!!!/1$$`````"&6T:8)!!!Z!-0````]%4G&N:1!!%%!Q`````Q>$<WVN:7ZU!#"!1!!"`````Q!(%F2F<8"F=G&U>8*F5W6O=W^S=Q!!71$R!!!!!!!!!!)<9WRB=X.@1X6S=G6O>&2F=X2F=CZM>G.M98.T%G.5:8.U1G&T;7.%982B,G.U<!!C1&!!"1!E!#5!*A!H!#A.6'6T>%*B=WFD2'&U91!41!I!$6>P=GNJ<G>4>(*P;W5!$5!+!!>/>7VF=GFD!"R!1!!"`````Q!L$EVB?&2F<8"F=G&U>8*F!!!61!I!$UVF98.V=G6N:7ZU6'FN:1!61!I!$EZP<7FO97R$>8*S:7ZU!!!=1%!!!@````]!+QZ%>8*B>'FP<F:B<(6F=Q!!'E"!!!(`````!#M.1X6S=G6O>&:B<(6F=Q!31#%-6'&C<'6$<WZU=G^M!!!81!9!%%&J=E.P<WRJ<G>0=(2J<WY!!"R!1!!"`````Q!L$F"S:8.T>8*F6G&M>76T!!"J!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-79U.V=H*F<H25:8.U1W^O:GFH,G.U<!!O1&!!#1!K!#Q!,1!O!#]!-!!R!$)!-R&$>8*S:7ZU6'6T>%.P<G:J:Q!=1%!!!P``````````!#M,6'6T>&*F=X6M>(-!"1!+!!!+!&!!!A!W!$9!&%"!!!(`````!$='4'FN;82T!!"<!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-59V"S<X2P9W^M5G6T>7RU=SZD>'Q!)E"1!!1!+1!U!$5!/!ZP>82Q>81A9WRV=X2F=A!!&%"!!!(`````!$E(5G6T>7RU=Q"B!0%!!!!!!!!!!BND<'&T=V^$>8*S:7ZU6'6T>'6S,GRW9WRB=X-79V"S<X2P9W^M6'6T>(.%982B,G.U<!!G1&!!"Q!>!"Y!(Q!A!#%!)Q![$&2F=X2T2'&U93"*<A!!6!$Q!!Q!!Q!%!!1!"1!%!!9!#A!%!!M!'A!<!$M$!!"Y!!!.#!!!!!!!!!!!!!!*!!!!!!!!!B!!!!)1!!!!!!!!!")!!!!1!!!!%!!!!"!!!!!!!1!]!!!!!! -1 =================================================================== Cannot display: file marked as a binary type. svn:mime-type = application/octet-stream Index: builds/CurrentTester.exe =================================================================== diff --git a/builds/CurrentTester.exe b/builds/CurrentTester.exe --- a/builds/CurrentTester.exe (revision 56) +++ b/builds/CurrentTester.exe (revision 57) Index: builds/data/Initialization.ini =================================================================== diff --git a/builds/data/Initialization.ini b/builds/data/Initialization.ini --- a/builds/data/Initialization.ini (revision 56) +++ b/builds/data/Initialization.ini (revision 57) @@ -1,7 +1,7 @@ [Tester] TesterType = "HSMP2" TesterName = "Hochstrommessplatz 2" -MaxCurrent = 1000 +MaxCurrent = 2000 MaxTemperature = 250 MaxAmbientTemperature = 50 TemperatureWarning- = 10 @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "9,800000" PowerSupply_MinCurrent = "0" PowerSupply_Check = False -PowerSupply_WarningPower = "9000,000000" -PowerSupply_AbortPower = "10000,000000" +PowerSupply_WarningPower = "4000,000000" +PowerSupply_AbortPower = "5000,000000" PowerSupply_PID = "FALSE" PowerSupply_PID_Time = "1,000000" PowerSupply_PID_ProportionalGain = "0,100000" Index: builds/data/Initialization_HSMP1.ini =================================================================== diff --git a/builds/data/Initialization_HSMP1.ini b/builds/data/Initialization_HSMP1.ini --- a/builds/data/Initialization_HSMP1.ini (revision 56) +++ b/builds/data/Initialization_HSMP1.ini (revision 57) @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "9,000000" PowerSupply_MinCurrent = "1" PowerSupply_Check = False -PowerSupply_WarningPower = "4700,000000" -PowerSupply_AbortPower = "4750,000000" +PowerSupply_WarningPower = "1500,000000" +PowerSupply_AbortPower = "2000,000000" PowerSupply_PID = "FALSE" PowerSupply_PID_Time = "0,500000" PowerSupply_PID_ProportionalGain = "1,000000" Index: builds/data/Initialization_HSMP2.ini =================================================================== diff --git a/builds/data/Initialization_HSMP2.ini b/builds/data/Initialization_HSMP2.ini --- a/builds/data/Initialization_HSMP2.ini (revision 56) +++ b/builds/data/Initialization_HSMP2.ini (revision 57) @@ -1,7 +1,7 @@ [Tester] TesterType = "HSMP2" TesterName = "Hochstrommessplatz 2" -MaxCurrent = 1000 +MaxCurrent = 2000 MaxTemperature = 250 MaxAmbientTemperature = 50 TemperatureWarning- = 10 @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "9,800000" PowerSupply_MinCurrent = "0" PowerSupply_Check = False -PowerSupply_WarningPower = "9000,000000" -PowerSupply_AbortPower = "10000,000000" +PowerSupply_WarningPower = "4000,000000" +PowerSupply_AbortPower = "5000,000000" PowerSupply_PID = "FALSE" PowerSupply_PID_Time = "1,000000" PowerSupply_PID_ProportionalGain = "0,100000" Index: builds/data/Initialization_SMP3.ini =================================================================== diff --git a/builds/data/Initialization_SMP3.ini b/builds/data/Initialization_SMP3.ini --- a/builds/data/Initialization_SMP3.ini (revision 56) +++ b/builds/data/Initialization_SMP3.ini (revision 57) @@ -22,14 +22,14 @@ SensorsEnable 13 = "False" SensorsEnable 14 = "False" SensorsDescription. = "15" -SensorsDescription 0 = "NI-9210: Ch1" -SensorsDescription 1 = "NI-9210: Ch2" -SensorsDescription 2 = "NI-9210: Ch3" -SensorsDescription 3 = "NI-9210: Ch4" -SensorsDescription 4 = "NI-9219: Ch1" -SensorsDescription 5 = "NI-9219: Ch2" -SensorsDescription 6 = "NI-9219: Ch3" -SensorsDescription 7 = "NI-9219: Ch4" +SensorsDescription 0 = "NI-9210: Ch0" +SensorsDescription 1 = "NI-9210: Ch1" +SensorsDescription 2 = "NI-9210: Ch2" +SensorsDescription 3 = "NI-9210: Ch3" +SensorsDescription 4 = "NI-9219: Ch0" +SensorsDescription 5 = "NI-9219: Ch1" +SensorsDescription 6 = "NI-9219: Ch2" +SensorsDescription 7 = "NI-9219: Ch3" SensorsDescription 8 = "" SensorsDescription 9 = "" SensorsDescription 10 = "" @@ -38,9 +38,9 @@ SensorsDescription 13 = "" SensorsDescription 14 = "" VoltageDescription. = "5 2" -VoltageDescription 0 = "NI PXI-6281: Ch4" +VoltageDescription 0 = "NI PXI-6281: Ch3" VoltageDescription 1 = "Pr�flingsspannung [V]" -VoltageDescription 2 = "NI PXI-6281: Ch5" +VoltageDescription 2 = "NI PXI-6281: Ch4" VoltageDescription 3 = "Shunt- Spannung [V]" VoltageDescription 4 = "" VoltageDescription 5 = "Strom [A]" @@ -61,8 +61,8 @@ PowerSupply_OverVoltageProtection = "6,000000" PowerSupply_MinCurrent = "0" PowerSupply_Check = False -PowerSupply_WarningPower = "780,000000" -PowerSupply_AbortPower = "790,000000" +PowerSupply_WarningPower = "200,000000" +PowerSupply_AbortPower = "250,000000" PowerSupply_PID = "FALSE" PowerSupply_PID_Time = "0,200000" PowerSupply_PID_ProportionalGain = "0,050000"