Projects/CurrentTester Files · CurrentTester [LabVIEW]/Initialization

- RTD and thermistor modified;...

- RTD and thermistor modified; - symbols for sensor type were added to the basic data table

LabVIEW - - Load All Authors

File last commit:

r20:21


                r20:21

Download file

             Initialization_SMP3.ini
        
                    328 lines
            
             | 15.1 KiB
            
                | text/x-ini
            
             |
                IniLexer
            
             / CurrentTester [LabVIEW] / Initialization_SMP3.ini
          
                    History
                
                 |
                  Source
                 | Raw
                 |Copy content
                 |Copy permalink

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      [Tester]

      TesterType = "SMP3"

      TesterName = "Strommessplatz 3"

      MaxCurrent = 130

      MaxTemperature = 250

      SensorsEnable.<size(s)> = "10"

      SensorsEnable 0 = "True"

      SensorsEnable 1 = "True"

      SensorsEnable 2 = "True"

      SensorsEnable 3 = "True"

      SensorsEnable 4 = "False"

      SensorsEnable 5 = "False"

      SensorsEnable 6 = "False"

      SensorsEnable 7 = "False"

      SensorsEnable 8 = "False"

      SensorsEnable 9 = "False"

      SensorsDescription.<size(s)> = "10"

      SensorsDescription 0 = "NI-9210: Ch1"

      SensorsDescription 1 = "NI-9210: Ch2"

      SensorsDescription 2 = "NI-9210: Ch3"

      SensorsDescription 3 = "NI-9210: Ch4"

      SensorsDescription 4 = "NI-9219: Ch1"

      SensorsDescription 5 = "NI-9219: Ch2"

      SensorsDescription 6 = "NI-9219: Ch3"

      SensorsDescription 7 = "NI-9219: Ch4"

      SensorsDescription 8 = ""

      SensorsDescription 9 = ""

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      VoltageDescription.<size(s)> = "4 2"

      VoltageDescription 0 = "NI PXI-6281: Ch4"

      VoltageDescription 1 = "Pr�flingsspannung [V]"

      VoltageDescription 2 = "NI PXI-6281: Ch5"

      VoltageDescription 3 = "Shunt- Spannung [V]"

      VoltageDescription 4 = ""

      VoltageDescription 5 = "Strom [A]"

      VoltageDescription 6 = ""

      VoltageDescription 7 = "Widerstand [mOhm]"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"

      [Hardware]

      SimulateDevices = True

      DI_E-Stop = "PXI1Slot5/port0/line5"

      DI_Setup = "PXI1Slot5/port0/line4"

      PowerSupply_MinCurrent = "0"

      PowerSupply_Check = False

        LabVIEW
    
- PID prepared;...

              r9
            
      PowerSupply_WarningPower = "780,000000"

      PowerSupply_AbortPower = "790,000000"

        LabVIEW
    
- PID in setup changed...

              r16
            
      PowerSupply_PID = "False"

      PowerSupply_PID_Time = "0,100000"

      PowerSupply_PID_ProportionalGain = "0,100000"

      PowerSupply_PID_IntegralTime = "0,180000"

        LabVIEW
    
- PID in setup;...

              r14
            
      PowerSupply_PID_DerivativeTime = "0,000000"

        LabVIEW
    
- PID in setup changed...

              r16
            
      AbortCurrentDifference = "20"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Measurement_Channels.<size(s)> = "12"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Measurement_Channels 0 = "PXI1Slot5/ai4"

      Measurement_Channels 1 = "PXI1Slot5/ai5"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Measurement_Channels 2 = "NI9210/ai0"

      Measurement_Channels 3 = "NI9210/ai1"

      Measurement_Channels 4 = "NI9210/ai2"

      Measurement_Channels 5 = "NI9210/ai3"

      Measurement_Channels 6 = "NI9219/ai0"

      Measurement_Channels 7 = "NI9219/ai1"

      Measurement_Channels 8 = "NI9219/ai2"

      Measurement_Channels 9 = "NI9219/ai3"

      Measurement_Channels 10 = ""

      Measurement_Channels 11 = ""

      ShuntResistance = 0,001

      Measurement_Check = False

      DMM_VISAName = "PXI1Slot3"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      DMM_ContactLimits = "<size(s)=2> 0,0 1,0"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"

      TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"

      VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"

      VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"

      AllowedContactFails = "2"

      [SMP3]

      PowerSupply_VISAName = "COM4"

      PowerSupply_Address = "1"

      PowerSupply_Baudrate = "9600"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      PowerSupply_OutputVoltage = "5,500000"

      PowerSupply_OverVoltageProtection = "6,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      DMM_Function = "2-wire Resistance"

      DMM_AutoRange = False

      DMM_Range = "0,020000"

      DMM_Resolution = "0,001000"

      Configuration_AI_Voltage.<size(s)> = "2"

      Configuration_AI_Voltage 0.Maximum = "5,000000"

      Configuration_AI_Voltage 0.Minimum = "-5,000000"

      Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"

      Configuration_AI_Voltage 1.Maximum = "1,000000"

      Configuration_AI_Voltage 1.Minimum = "-1,000000"

      Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"

      Configuration_AI_Thermocouple.<size(s)> = "10"

      Configuration_AI_Thermocouple 0.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 0.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 0.Type = "K"

      Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 1.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 1.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 1.Type = "K"

      Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 2.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 2.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 2.Type = "K"

      Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 3.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 3.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 3.Type = "K"

        LabVIEW
    
- Default ini files for SMP3: temperature measurements all to built-in compesation

              r17
            
      Configuration_AI_Thermocouple 3.CJC_Source = "Built-In"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"

      Configuration_AI_Thermocouple 4.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 4.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 4.Type = "K"

      Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 5.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 5.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 5.Type = "K"

      Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 6.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 6.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 6.Type = "K"

      Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 7.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 7.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 7.Type = "K"

      Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 8.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 8.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 8.Type = "K"

      Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"

      Configuration_AI_Thermocouple 9.Maximum = "250,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Configuration_AI_Thermocouple 9.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_Thermocouple 9.Type = "K"

      Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"

      Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"

      Configuration_AI_NI9219_Resistance.<size(s)> = "4"

      Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"

      Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"

      Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"

      Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"

      Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750"

      Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000"

      Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"

      Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"

      Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750"

      Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000"

      Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"

      Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"

      Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"

      Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000"

      Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"

      Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"

      Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"

        LabVIEW
    
- SMP3: RTD and thermistor added

              r19
            
      Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750"

      Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_NI9219_Type.<size(s)> = "4"

      Configuration_AI_NI9219_Type 0 = "Thermocouple"

        LabVIEW
    
- RTD and thermistor modified;...

              r20
            
      Configuration_AI_NI9219_Type 1 = "Thermocouple"

      Configuration_AI_NI9219_Type 2 = "Thermocouple"

        LabVIEW
    
- SMP3 configuration in setup mode ready (not tested)

              r2
            
      Configuration_AI_NI9219_Type 3 = "Thermocouple"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
        LabVIEW
    
- Setup mode: configuration prepared;...

              r1
            
      [HSMP1]

      PowerSupply_VISAName = "COM2"

      PowerSupply_Address = "6"

      PowerSupply_Baudrate = "9600"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      PowerSupply_OutputVoltage = "8,000000"

      PowerSupply_OverVoltageProtection = "9,000000"

        LabVIEW
    
- Setup mode: configuration prepared;...

              r1
            
      DMM_Baudrate = "9600"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Measurement_Channels_AutoRange.<size(s)> = "13"

        LabVIEW
    
- PID in setup changed...

              r16
            
      Measurement_Channels_AutoRange 0 = "FALSE"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Measurement_Channels_AutoRange 1 = "TRUE"

      Measurement_Channels_AutoRange 2 = "TRUE"

      Measurement_Channels_AutoRange 3 = "TRUE"

      Measurement_Channels_AutoRange 4 = "TRUE"

      Measurement_Channels_AutoRange 5 = "TRUE"

      Measurement_Channels_AutoRange 6 = "TRUE"

      Measurement_Channels_AutoRange 7 = "TRUE"

      Measurement_Channels_AutoRange 8 = "TRUE"

      Measurement_Channels_AutoRange 9 = "TRUE"

      Measurement_Channels_AutoRange 10 = "TRUE"

      Measurement_Channels_AutoRange 11 = "TRUE"

      Measurement_Channels_AutoRange 12 = "TRUE"

        LabVIEW
    
- PID in setup changed...

              r16
            
      Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"

        LabVIEW
    
- HSMP1 implemented

              r3
            
      Measurement_Channels_Resolution.<size(s)> = "13"

      Measurement_Channels_Resolution 0 = "6.5"

      Measurement_Channels_Resolution 1 = "6.5"

      Measurement_Channels_Resolution 2 = "6.5"

      Measurement_Channels_Resolution 3 = "6.5"

      Measurement_Channels_Resolution 4 = "6.5"

      Measurement_Channels_Resolution 5 = "6.5"

      Measurement_Channels_Resolution 6 = "6.5"

      Measurement_Channels_Resolution 7 = "6.5"

      Measurement_Channels_Resolution 8 = "6.5"

      Measurement_Channels_Resolution 9 = "6.5"

      Measurement_Channels_Resolution 10 = "6.5"

      Measurement_Channels_Resolution 11 = "6.5"

      Measurement_Channels_Resolution 12 = "6.5"

      Resistance_Function = "Resistance"

      Resistance_OffsetCompensation = "FALSE"

      TableControl_Out_LiftTable = "Dev1/port0/line5"

      TableControl_Out_SettingMode.<size(s)> = "2"

      TableControl_Out_SettingMode 0 = "Dev1/port0/line0"

      TableControl_Out_SettingMode 1 = "Dev1/port0/line1"

        LabVIEW
    
- Setup mode: configuration prepared;...

              r1
            
        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      [DefaultValues]

      WorkingStroke = "0"

        LabVIEW
    
- Max temperature for every sensor added;...

              r10
            
      MaxTemperature = "<size(s)=10> 50,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      MeasurementTime = "1"

      NominalCurrent = "0"

      TableControl = False

      SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"

      Sensors+.<size(s)> = "10"

      Sensors+ 0 = "True"

      Sensors+ 1 = "True"

      Sensors+ 2 = "True"

      Sensors+ 3 = "True"

      Sensors+ 4 = "False"

      Sensors+ 5 = "False"

      Sensors+ 6 = "False"

      Sensors+ 7 = "False"

      Sensors+ 8 = "False"

      Sensors+ 9 = "False"

      SensorsFunction.<size(s)> = "10"

      SensorsFunction 0 = "Umgebungstemperatur"

      SensorsFunction 1 = "Pr�flingstemperatur"

      SensorsFunction 2 = "Temperatur 3"

      SensorsFunction 3 = "Temperatur 4"

      SensorsFunction 4 = "Temperatur 5"

      SensorsFunction 5 = "Temperatur 6"

      SensorsFunction 6 = "Temperatur 7"

      SensorsFunction 7 = "Temperatur 8"

      SensorsFunction 8 = "Temperatur 9"

      SensorsFunction 9 = "Temperatur 10"

      [Pathes]

      User = "C:\Work\CurrentTester\support\User.txt"

        LabVIEW
    
- Setup mode: configuration prepared;...

              r1
            
      ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"

        LabVIEW
    
- Max temperature for every sensor added;...

              r10
            
      ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"

      [Report]

      FileNameFormat = "%s_TestResults.txt"

      ReportNameFormat = "%s_TestReport.xlsx"

      ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"

      ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"

        LabVIEW
    
- Protocol creation implemented

              r5
            
      [Protocol]

        LabVIEW
    
- PID regler: init bug changed;...

              r13
            
      ProtocolNameFormat = "%s_A%d_Report.docx"

        LabVIEW
    
- Protocol creation implemented

              r5
            
      ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"

      ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"

        LabVIEW
    
- Protocol creation: move files added;...

              r6
            
      ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"

      ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"

        LabVIEW
    
- PID regler: init bug changed;...

              r13
            
      ProtocolDataFolderName = "Bilder|Messungen"

        LabVIEW
    
- Protocol creation implemented

              r5
            
        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      [StateMessages]

        LabVIEW
    
- Abort current difference added

              r15
            
      Info.<size(s)> = "22"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"

      Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"

      Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"

      Info 3 = "Testdaten anlegen"

      Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"

      Info 5 = "Test geladen"

      Info 6 = "Laufende Pr�fung..."

      Info 7 = "Pr�fung erfolgreich abgeschlossen"

      Info 8 = "Fehler aufgetreten!"

      Info 9 = "Test abgebrochen!"

      Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"

      Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"

      Info 12 = "Test abgebrochen! Messrate ist zu hoch"

      Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"

        LabVIEW
    
- PID prepared;...

              r9
            
      Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"

        LabVIEW
    
- Abort current difference added

              r15
            
      Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"

      Info 16 = "Report wird erstellt... Bitte warten"

      Info 17 = "Report erstellt"

      Info 18 = "Der letzte Test ist geladen..."

      Info 19 = "Testdaten zur Protokollerstellung laden und ausw�hlen"

      Info 20 = "Protokoll wird erstellt... Bitte warten"

      Info 21 = "Protokoll erstellt"

      Result.<size(s)> = "22"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Result 0 = "Not-Halt"

      Result 1 = ""

      Result 2 = "Bereit"

      Result 3 = "Bereit"

      Result 4 = "Einrichtbetrieb"

      Result 5 = "Bereit"

      Result 6 = "Pr�fung l�uft"

      Result 7 = "Pr�fung fertig"

      Result 8 = "Fehler"

      Result 9 = "Pr�fung Stop"

      Result 10 = "Pr�fung Stop"

      Result 11 = "Pr�fung Stop"

      Result 12 = "Pr�fung Stop"

      Result 13 = "Pr�fung Stop"

        LabVIEW
    
- PID prepared;...

              r9
            
      Result 14 = "Pr�fung Stop"

        LabVIEW
    
- Abort current difference added

              r15
            
      Result 15 = "Pr�fung Stop"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Result 16 = "Bereit"

        LabVIEW
    
- Protocol creation implemented

              r5
            
      Result 17 = "Bereit"

        LabVIEW
    
- Protocol creation: move files added;...

              r6
            
      Result 18 = "Bereit"

      Result 19 = "Bereit"

        LabVIEW
    
- PID prepared;...

              r9
            
      Result 20 = "Bereit"

        LabVIEW
    
- Abort current difference added

              r15
            
      Result 21 = "Bereit"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      [DialogMessages]

        LabVIEW
    
- Protocol creation: message added by different current profiles;...

              r7
            
      Messages.<size(s)> = "4"

        LabVIEW
    
- CurrentTester: SMP3 implemented

              r0
            
      Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"

        LabVIEW
    
- Protocol creation implemented

              r5
            
      Messages 1 = "W�hlen Sie eine Vorlage aus:"

        LabVIEW
    
- Protocol creation: message added by different current profiles;...

              r7
            
      Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"

      Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"

	Site-wide shortcuts
/	Use quick search box
g h	Goto home page
g g	Goto my private gists page
g G	Goto my public gists page
g 0-9	Goto bookmarked items from 0-9
n r	New repository page
n g	New gist page

	Repositories
g s	Goto summary page
g c	Goto changelog page
g f	Goto files page
g F	Goto files page with file search activated
g p	Goto pull requests page
g o	Goto repository settings
g O	Goto repository access permissions settings
t s	Toggle sidebar on some pages

LabVIEW - CurrentTester: SMP3 implemented	r0	[Tester]
		TesterType = "SMP3"
		TesterName = "Strommessplatz 3"
		MaxCurrent = 130
		MaxTemperature = 250
		SensorsEnable.<size(s)> = "10"
		SensorsEnable 0 = "True"
		SensorsEnable 1 = "True"
		SensorsEnable 2 = "True"
		SensorsEnable 3 = "True"
		SensorsEnable 4 = "False"
		SensorsEnable 5 = "False"
		SensorsEnable 6 = "False"
		SensorsEnable 7 = "False"
		SensorsEnable 8 = "False"
		SensorsEnable 9 = "False"
		SensorsDescription.<size(s)> = "10"
		SensorsDescription 0 = "NI-9210: Ch1"
		SensorsDescription 1 = "NI-9210: Ch2"
		SensorsDescription 2 = "NI-9210: Ch3"
		SensorsDescription 3 = "NI-9210: Ch4"
		SensorsDescription 4 = "NI-9219: Ch1"
		SensorsDescription 5 = "NI-9219: Ch2"
		SensorsDescription 6 = "NI-9219: Ch3"
		SensorsDescription 7 = "NI-9219: Ch4"
		SensorsDescription 8 = ""
		SensorsDescription 9 = ""
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	VoltageDescription.<size(s)> = "4 2"
		VoltageDescription 0 = "NI PXI-6281: Ch4"
		VoltageDescription 1 = "Pr�flingsspannung [V]"
		VoltageDescription 2 = "NI PXI-6281: Ch5"
		VoltageDescription 3 = "Shunt- Spannung [V]"
		VoltageDescription 4 = ""
		VoltageDescription 5 = "Strom [A]"
		VoltageDescription 6 = ""
		VoltageDescription 7 = "Widerstand [mOhm]"
LabVIEW - CurrentTester: SMP3 implemented	r0	CalibrationPassword = "48c8947f69c054a5caa934674ce8881d02bb18fb59d5a63eeaddff735b0e9801e87294783281ae49fc8287a0fd86779b27d7972d3e84f0fa0d826d7cb67dfefc"

		[Hardware]
		SimulateDevices = True
		DI_E-Stop = "PXI1Slot5/port0/line5"
		DI_Setup = "PXI1Slot5/port0/line4"
		PowerSupply_MinCurrent = "0"
		PowerSupply_Check = False
LabVIEW - PID prepared;...	r9	PowerSupply_WarningPower = "780,000000"
		PowerSupply_AbortPower = "790,000000"
LabVIEW - PID in setup changed...	r16	PowerSupply_PID = "False"
		PowerSupply_PID_Time = "0,100000"
		PowerSupply_PID_ProportionalGain = "0,100000"
		PowerSupply_PID_IntegralTime = "0,180000"
LabVIEW - PID in setup;...	r14	PowerSupply_PID_DerivativeTime = "0,000000"
LabVIEW - PID in setup changed...	r16	AbortCurrentDifference = "20"
LabVIEW - CurrentTester: SMP3 implemented	r0	Measurement_Channels.<size(s)> = "12"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Measurement_Channels 0 = "PXI1Slot5/ai4"
		Measurement_Channels 1 = "PXI1Slot5/ai5"
LabVIEW - CurrentTester: SMP3 implemented	r0	Measurement_Channels 2 = "NI9210/ai0"
		Measurement_Channels 3 = "NI9210/ai1"
		Measurement_Channels 4 = "NI9210/ai2"
		Measurement_Channels 5 = "NI9210/ai3"
		Measurement_Channels 6 = "NI9219/ai0"
		Measurement_Channels 7 = "NI9219/ai1"
		Measurement_Channels 8 = "NI9219/ai2"
		Measurement_Channels 9 = "NI9219/ai3"
		Measurement_Channels 10 = ""
		Measurement_Channels 11 = ""
		ShuntResistance = 0,001
		Measurement_Check = False
		DMM_VISAName = "PXI1Slot3"
LabVIEW - HSMP1 implemented	r3	DMM_ContactLimits = "<size(s)=2> 0,0 1,0"
LabVIEW - CurrentTester: SMP3 implemented	r0	TemperatureGain = "<size(s)=10> 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
		TemperatureOffset = "<size(s)=10> 0,000000 0,000000 0,000000 0,500000 0,000000 0,000000 0,000000 0,000000 0,000000 0,000000"
		VoltageGain = "<size(s)=4> 1,000000 1,000000 1,000000 1,000000"
		VoltageOffset = "<size(s)=4> 0,000000 0,000000 0,000000 0,000000"
		AllowedContactFails = "2"

		[SMP3]
		PowerSupply_VISAName = "COM4"
		PowerSupply_Address = "1"
		PowerSupply_Baudrate = "9600"
LabVIEW - RTD and thermistor modified;...	r20	PowerSupply_OutputVoltage = "5,500000"
		PowerSupply_OverVoltageProtection = "6,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	DMM_Function = "2-wire Resistance"
		DMM_AutoRange = False
		DMM_Range = "0,020000"
		DMM_Resolution = "0,001000"
		Configuration_AI_Voltage.<size(s)> = "2"
		Configuration_AI_Voltage 0.Maximum = "5,000000"
		Configuration_AI_Voltage 0.Minimum = "-5,000000"
		Configuration_AI_Voltage 0.InputTerminalConfiguration = "Differential"
		Configuration_AI_Voltage 1.Maximum = "1,000000"
		Configuration_AI_Voltage 1.Minimum = "-1,000000"
		Configuration_AI_Voltage 1.InputTerminalConfiguration = "Differential"
		Configuration_AI_Thermocouple.<size(s)> = "10"
		Configuration_AI_Thermocouple 0.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 0.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 0.Type = "K"
		Configuration_AI_Thermocouple 0.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 0.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 1.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 1.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 1.Type = "K"
		Configuration_AI_Thermocouple 1.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 1.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 2.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 2.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 2.Type = "K"
		Configuration_AI_Thermocouple 2.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 2.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 3.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 3.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 3.Type = "K"
LabVIEW - Default ini files for SMP3: temperature measurements all to built-in compesation	r17	Configuration_AI_Thermocouple 3.CJC_Source = "Built-In"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 3.CJC_Value = "10,000000"
		Configuration_AI_Thermocouple 4.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 4.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 4.Type = "K"
		Configuration_AI_Thermocouple 4.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 4.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 5.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 5.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 5.Type = "K"
		Configuration_AI_Thermocouple 5.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 5.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 6.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 6.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 6.Type = "K"
		Configuration_AI_Thermocouple 6.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 6.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 7.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 7.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 7.Type = "K"
		Configuration_AI_Thermocouple 7.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 7.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 8.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 8.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 8.Type = "K"
		Configuration_AI_Thermocouple 8.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 8.CJC_Value = "25,000000"
		Configuration_AI_Thermocouple 9.Maximum = "250,000000"
LabVIEW - HSMP1 implemented	r3	Configuration_AI_Thermocouple 9.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_Thermocouple 9.Type = "K"
		Configuration_AI_Thermocouple 9.CJC_Source = "Built-In"
		Configuration_AI_Thermocouple 9.CJC_Value = "25,000000"
		Configuration_AI_NI9219_Resistance.<size(s)> = "4"
		Configuration_AI_NI9219_Resistance 0.Maximum = "10500,000000"
		Configuration_AI_NI9219_Resistance 0.Minimum = "0,000000"
		Configuration_AI_NI9219_Resistance 0.Configuration = "2-Wire"
		Configuration_AI_NI9219_Resistance 0.CurrentExcitationSource = "Internal"
		Configuration_AI_NI9219_Resistance 0.CurrentExcitationValue = "0,000500"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 0.RTD_Type = "Pt3750"
		Configuration_AI_NI9219_Resistance 0.R0 = "1000,000000"
LabVIEW - RTD and thermistor modified;...	r20	Configuration_AI_NI9219_Resistance 0.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 1.Maximum = "250,000000"
		Configuration_AI_NI9219_Resistance 1.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_NI9219_Resistance 1.Configuration = "2-Wire"
		Configuration_AI_NI9219_Resistance 1.CurrentExcitationSource = "Internal"
		Configuration_AI_NI9219_Resistance 1.CurrentExcitationValue = "0,000500"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 1.RTD_Type = "Pt3750"
		Configuration_AI_NI9219_Resistance 1.R0 = "1000,000000"
LabVIEW - RTD and thermistor modified;...	r20	Configuration_AI_NI9219_Resistance 1.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 2.Maximum = "250,000000"
		Configuration_AI_NI9219_Resistance 2.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_NI9219_Resistance 2.Configuration = "2-Wire"
		Configuration_AI_NI9219_Resistance 2.CurrentExcitationSource = "Internal"
		Configuration_AI_NI9219_Resistance 2.CurrentExcitationValue = "0,000500"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 2.RTD_Type = "Pt3750"
		Configuration_AI_NI9219_Resistance 2.R0 = "1000,000000"
LabVIEW - RTD and thermistor modified;...	r20	Configuration_AI_NI9219_Resistance 2.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 3.Maximum = "250,000000"
		Configuration_AI_NI9219_Resistance 3.Minimum = "-200,000000"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_NI9219_Resistance 3.Configuration = "2-Wire"
		Configuration_AI_NI9219_Resistance 3.CurrentExcitationSource = "Internal"
		Configuration_AI_NI9219_Resistance 3.CurrentExcitationValue = "0,000500"
LabVIEW - SMP3: RTD and thermistor added	r19	Configuration_AI_NI9219_Resistance 3.RTD_Type = "Pt3750"
		Configuration_AI_NI9219_Resistance 3.R0 = "1000,000000"
LabVIEW - RTD and thermistor modified;...	r20	Configuration_AI_NI9219_Resistance 3.ABC = "<size(s)=3> 1,224312924E-3 2,308955523E-4 3,938074268E-9"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_NI9219_Type.<size(s)> = "4"
		Configuration_AI_NI9219_Type 0 = "Thermocouple"
LabVIEW - RTD and thermistor modified;...	r20	Configuration_AI_NI9219_Type 1 = "Thermocouple"
		Configuration_AI_NI9219_Type 2 = "Thermocouple"
LabVIEW - SMP3 configuration in setup mode ready (not tested)	r2	Configuration_AI_NI9219_Type 3 = "Thermocouple"
LabVIEW - CurrentTester: SMP3 implemented	r0
LabVIEW - Setup mode: configuration prepared;...	r1	[HSMP1]
		PowerSupply_VISAName = "COM2"
		PowerSupply_Address = "6"
		PowerSupply_Baudrate = "9600"
LabVIEW - HSMP1 implemented	r3	PowerSupply_OutputVoltage = "8,000000"
		PowerSupply_OverVoltageProtection = "9,000000"
LabVIEW - Setup mode: configuration prepared;...	r1	DMM_Baudrate = "9600"
LabVIEW - HSMP1 implemented	r3	Measurement_Channels_AutoRange.<size(s)> = "13"
LabVIEW - PID in setup changed...	r16	Measurement_Channels_AutoRange 0 = "FALSE"
LabVIEW - HSMP1 implemented	r3	Measurement_Channels_AutoRange 1 = "TRUE"
		Measurement_Channels_AutoRange 2 = "TRUE"
		Measurement_Channels_AutoRange 3 = "TRUE"
		Measurement_Channels_AutoRange 4 = "TRUE"
		Measurement_Channels_AutoRange 5 = "TRUE"
		Measurement_Channels_AutoRange 6 = "TRUE"
		Measurement_Channels_AutoRange 7 = "TRUE"
		Measurement_Channels_AutoRange 8 = "TRUE"
		Measurement_Channels_AutoRange 9 = "TRUE"
		Measurement_Channels_AutoRange 10 = "TRUE"
		Measurement_Channels_AutoRange 11 = "TRUE"
		Measurement_Channels_AutoRange 12 = "TRUE"
LabVIEW - PID in setup changed...	r16	Measurement_Channels_Range = "<size(s)=13> 30,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000 1,000000"
LabVIEW - HSMP1 implemented	r3	Measurement_Channels_Resolution.<size(s)> = "13"
		Measurement_Channels_Resolution 0 = "6.5"
		Measurement_Channels_Resolution 1 = "6.5"
		Measurement_Channels_Resolution 2 = "6.5"
		Measurement_Channels_Resolution 3 = "6.5"
		Measurement_Channels_Resolution 4 = "6.5"
		Measurement_Channels_Resolution 5 = "6.5"
		Measurement_Channels_Resolution 6 = "6.5"
		Measurement_Channels_Resolution 7 = "6.5"
		Measurement_Channels_Resolution 8 = "6.5"
		Measurement_Channels_Resolution 9 = "6.5"
		Measurement_Channels_Resolution 10 = "6.5"
		Measurement_Channels_Resolution 11 = "6.5"
		Measurement_Channels_Resolution 12 = "6.5"
		Resistance_Function = "Resistance"
		Resistance_OffsetCompensation = "FALSE"
		TableControl_Out_LiftTable = "Dev1/port0/line5"
		TableControl_Out_SettingMode.<size(s)> = "2"
		TableControl_Out_SettingMode 0 = "Dev1/port0/line0"
		TableControl_Out_SettingMode 1 = "Dev1/port0/line1"
LabVIEW - Setup mode: configuration prepared;...	r1
LabVIEW - CurrentTester: SMP3 implemented	r0	[DefaultValues]
		WorkingStroke = "0"
LabVIEW - Max temperature for every sensor added;...	r10	MaxTemperature = "<size(s)=10> 50,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000 80,000000"
LabVIEW - CurrentTester: SMP3 implemented	r0	MeasurementTime = "1"
		NominalCurrent = "0"
		TableControl = False
		SensorsColor = "<size(s)=10> 16776960 16711680 16744448 16744640 16711935 10879142 8388863 8421631 423327 9567230"
		Sensors+.<size(s)> = "10"
		Sensors+ 0 = "True"
		Sensors+ 1 = "True"
		Sensors+ 2 = "True"
		Sensors+ 3 = "True"
		Sensors+ 4 = "False"
		Sensors+ 5 = "False"
		Sensors+ 6 = "False"
		Sensors+ 7 = "False"
		Sensors+ 8 = "False"
		Sensors+ 9 = "False"
		SensorsFunction.<size(s)> = "10"
		SensorsFunction 0 = "Umgebungstemperatur"
		SensorsFunction 1 = "Pr�flingstemperatur"
		SensorsFunction 2 = "Temperatur 3"
		SensorsFunction 3 = "Temperatur 4"
		SensorsFunction 4 = "Temperatur 5"
		SensorsFunction 5 = "Temperatur 6"
		SensorsFunction 6 = "Temperatur 7"
		SensorsFunction 7 = "Temperatur 8"
		SensorsFunction 8 = "Temperatur 9"
		SensorsFunction 9 = "Temperatur 10"

		[Pathes]
		User = "C:\Work\CurrentTester\support\User.txt"
LabVIEW - Setup mode: configuration prepared;...	r1	ReportsFolder = "C:\Work\CurrentTester\support\ResultData_SMP3"
LabVIEW - Max temperature for every sensor added;...	r10	ProtocolsFolder = "\\orion\G K S - Test1\01_Access\Anlagen"
LabVIEW - CurrentTester: SMP3 implemented	r0	CurrentProfilesFolder = "C:\Work\CurrentTester\support\CurrentProfiles"

		[Report]
		FileNameFormat = "%s_TestResults.txt"
		ReportNameFormat = "%s_TestReport.xlsx"
		ReportTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\TemplateGerman.xlsx"
		ReportTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\TemplateEnglish.xlsx"

LabVIEW - Protocol creation implemented	r5	[Protocol]
LabVIEW - PID regler: init bug changed;...	r13	ProtocolNameFormat = "%s_A%d_Report.docx"
LabVIEW - Protocol creation implemented	r5	ProtocolTemplate_German = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateGerman.dotx"
		ProtocolTemplate_English = "C:\Work\CurrentTester\support\ReportTemplates\ProtocolTemplateEnglish.dotx"
LabVIEW - Protocol creation: move files added;...	r6	ProtocolComment_German = "Alle Messungen sind mit einem galvanisch isoliertem Thermosensor Type K durchf�hrt worden.\0ADie Testergebnisse und Auswertungen beziehen sich ausschlie�lich auf die Muster, die zu diesem Test unter Laborbedingungen verwendet wurden und auf den verwendeten Testaufbau!"
		ProtocolComment_English = "All measurements were carried out with a galvanically isolated Type K thermal sensors.\0AThe test results and evaluations refer exclusively to the samples that were used for this test under laboratory conditions and to the test setup used!"
LabVIEW - PID regler: init bug changed;...	r13	ProtocolDataFolderName = "Bilder\|Messungen"
LabVIEW - Protocol creation implemented	r5
LabVIEW - CurrentTester: SMP3 implemented	r0	[StateMessages]
LabVIEW - Abort current difference added	r15	Info.<size(s)> = "22"
LabVIEW - CurrentTester: SMP3 implemented	r0	Info 0 = "Aktivierter Not-Halt oder eine T�r steht offen! Ein Teststart ist nicht m�glich"
		Info 1 = "Zum Anlegen eines neuen Tests "Neuer Test" klicken"
		Info 2 = "Grunddaten anlegen oder bestehenden Test �ffnen"
		Info 3 = "Testdaten anlegen"
		Info 4 = "Der Schl�sselschalter muss in die Position "Einrichten" gebracht werden um die Einrichtbuttons zu aktivieren oder in die Position "Automatik" um den Test starten zu k�nnen oder den Strom manuell einzustellen!"
		Info 5 = "Test geladen"
		Info 6 = "Laufende Pr�fung..."
		Info 7 = "Pr�fung erfolgreich abgeschlossen"
		Info 8 = "Fehler aufgetreten!"
		Info 9 = "Test abgebrochen!"
		Info 10 = "Test abgebrochen! Maximale Temperatur wurde �berschritten"
		Info 11 = "Test abgebrochen! Fehlerhafte Kontaktierung"
		Info 12 = "Test abgebrochen! Messrate ist zu hoch"
		Info 13 = "Test abgebrochen! Stromprofil- Generierung ist fehlgeschlagen"
LabVIEW - PID prepared;...	r9	Info 14 = "Test abgebrochen! Eingestellte Abschaltleistung der Stromquelle wurde erreicht"
LabVIEW - Abort current difference added	r15	Info 15 = "Test abgebrochen! Gemessener Strom liegt au�erhalb des definierten Bereichs"
		Info 16 = "Report wird erstellt... Bitte warten"
		Info 17 = "Report erstellt"
		Info 18 = "Der letzte Test ist geladen..."
		Info 19 = "Testdaten zur Protokollerstellung laden und ausw�hlen"
		Info 20 = "Protokoll wird erstellt... Bitte warten"
		Info 21 = "Protokoll erstellt"
		Result.<size(s)> = "22"
LabVIEW - CurrentTester: SMP3 implemented	r0	Result 0 = "Not-Halt"
		Result 1 = ""
		Result 2 = "Bereit"
		Result 3 = "Bereit"
		Result 4 = "Einrichtbetrieb"
		Result 5 = "Bereit"
		Result 6 = "Pr�fung l�uft"
		Result 7 = "Pr�fung fertig"
		Result 8 = "Fehler"
		Result 9 = "Pr�fung Stop"
		Result 10 = "Pr�fung Stop"
		Result 11 = "Pr�fung Stop"
		Result 12 = "Pr�fung Stop"
		Result 13 = "Pr�fung Stop"
LabVIEW - PID prepared;...	r9	Result 14 = "Pr�fung Stop"
LabVIEW - Abort current difference added	r15	Result 15 = "Pr�fung Stop"
LabVIEW - CurrentTester: SMP3 implemented	r0	Result 16 = "Bereit"
LabVIEW - Protocol creation implemented	r5	Result 17 = "Bereit"
LabVIEW - Protocol creation: move files added;...	r6	Result 18 = "Bereit"
		Result 19 = "Bereit"
LabVIEW - PID prepared;...	r9	Result 20 = "Bereit"
LabVIEW - Abort current difference added	r15	Result 21 = "Bereit"
LabVIEW - CurrentTester: SMP3 implemented	r0
		[DialogMessages]
LabVIEW - Protocol creation: message added by different current profiles;...	r7	Messages.<size(s)> = "4"
LabVIEW - CurrentTester: SMP3 implemented	r0	Messages 0 = "Achtung Einrichtbetrieb!\0AM�gliche Gefahren:\0A-Klemmgefahr\0A-Hei�e Oberfl�chen\0A-Lichtbogen"
LabVIEW - Protocol creation implemented	r5	Messages 1 = "W�hlen Sie eine Vorlage aus:"
LabVIEW - Protocol creation: message added by different current profiles;...	r7	Messages 2 = "Geben Sie die f�r die Protokollerstellung erforderlichen Daten ein:"
		Messages 3 = "\0A\0A\0ADas Stromprofil f�r die gew�hlte Datengruppe ist nicht identisch!\0ABitte die Datenreihe mit dem nicht passenden Stromprofil entfernen"